driver dvd - rw (XP) y550p problems

Hello, guys.

I bought a new HARD drive. The installation everything worked. Then I installed something, and I can't see my dvd - rw. The problem seems to be with the driver for optiarc ad 75805 and scsi controller has a yellow question mark. I was not able to locate a driver for windows xp, so I ask for advice here. Any suggestions?

Thanks in advance!

Peace,

Solved.

Followed the advice of

http://forums.Lenovo.com/T5/Lenovo-3000-and-essential/G550-Optiarc-DVD-RW-ad-7580S-stopped-working/t...

Tags: Lenovo Notebooks

Similar Questions

  • Drive DVD Combo dv4-1125nr problem

    I have a HP DV4-1125nr, the problem ive got recently is that I can read and burn DVDs Double layer but can't read the DVD (R - or R +) and neither CD I'm looking for and I don't see anyone having this problem, if anyone can help me please? I would apreciate so much!.

    Hello

    First, try the automated Microsoft fixit at the link below.

    Windows 7

    Vista

    Check if the drive works now.

    If the drive does not, in the Start Menu, open Control Panel and click Device Manager.  Click to open the IDE ATA/ATAPI controllers.  Right-click on the first channel and select uninstall.  Do not delete if requested drivers.  When uninstalled repeat the process for each channel.  Also, if an ATA controller is listed, right click and uninstall it, once again is not removing the drivers if requested. Then, open the CD-ROM/DVD-ROM drives.  Right-click on the drive and choose uninstall.  Do not delete if requested drivers.

    Restart the computer and let Windows reinstall devices.  Check the disc again.

    If it still does not work, re-run the fixit automated Microsoft at the link below.

    Windows 7

    Vista

    Then, in the Start Menu, open Control Panel and click Device Manager.  Click to open the CD/DVD-ROM drives.  Right-click on the drive and choose uninstall.  Do not delete if requested drivers.  When the device has been uninstalled click the icon 'Search for hardware changes' (usually just below help in the toolbar).  Let windows reinstall the disc and see if it works now.

    Kind regards

    DP - K

  • Problems with the disk drive - DVD playback

    I have a Windows Vista Ultimate 64 bit PC with a Samsung SH - S223C DVD, player, which both are a little less than two years. Recently, I started having problems mainly watching DVD and also some problems of installation of video games. When you watch DVDs in Windows Media Center or Media Player, the player is very slow to load the disc, even sometimes not at all. When it's load and play the video may freeze a lot while the drive and fast shipping and rewinding are a nightmare, that nothing is really happening, the picture just freezes. Boredom, it's a day DVD can be read without problems, but the next I meet the above problems. I tried to buy a DVD-ROM of Hama Laser Lens Cleaner disc, which did not solve the problem, it has made no difference.

    I encounter any problems when you watch a video recorded on Media Center, I am the owner of a TV Tuner and all saved games video very well without any problems. Also, I live in England so my hard drive is region 2.
    I have no idea how to fix this, it is very annoying. I'd appreciate any help that anyone can give me.

    Thank you.

    Hello Dan

    You can contact Samsung on the drive and see if there is an update of the firmware. If this isn't the case, you can replace the drive because it sounds like the drive itself is a failure.
  • I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

    I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

    I have sandisk cruzer blade USB key

    Hi Rohit,

    Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

    1. You did it any significant hardware or change software on the computer before this problem?
    2. When do you get exactly the error message?
    3. Have you tried to connect to any other computer on this flash drives?
    4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
    5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

    The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

    Method 1:

    Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

    If method 1 does not work, try Method 2.

    Method 2:

    Remove and reinstall all USB controllers.

    1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    2. In the list of the categories of equipment, locate and expand Bus USB controllers.
    3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
    4. Restart the computer and let the USB controllers get reinstalled.

    Plug in the removable USB device and test to make sure that the problem is solved.

    If the problem persists, go to method 3.

    Method 3:

    This method will install the latest drivers from device to your USB device.

    1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
    2. Click find updates. When the scan finished, click optional review updates.
    3. Click the check box next to the update, and then click install updates.
    4. If you are prompted, read the license agreement, then click I agree.
    5. Follow the instructions on the screen to download and install updates.
    6. If you are prompted, restart your computer.

    More information: Update a hardware driver that is not working properly

    Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  • Upgrade to el capitan and hoping to drive DVD would work properly but no, still do not play some of my DVDs. Is there an upgrade available? my library of playable DVD shrinks

    Upgrade to el capitan and hoping to drive DVD would work properly but no, still do not play some of my DVDs. Is there an upgrade available? my library of playable DVD shrinks. IMac originally purchased in 2010. DVD 5.9.5

    I'm having no problem with my DVD.

    Could you give more details about those who are out of work?

  • Change the drive DVD on a Satellite 1410 801

    Hi all

    I want to change my dvd player for dvd writer 'toshiba SD-R6472U' on my toshiba 1410-801!

    I opened the laptop and the drive! right now the problem ;) beging

    I can see in the bios option "already changed" HARD and the DVD drive, but once past the toshiba screen seems to say "IDE 1 #error" error message. and the dvd player appears not in the "my computer" I tried to put a jumper to put the HARD drive in salve, master mode and cable select anyway even problem!

    Greetings to all and waiting for your help!

    Hello

    It seems that you bought the disc is not compatible!
    It is not recommended to connect any pin on the new drive code!
    I would like to invite your dealer where you bought the player and ask a new compatible.
    The fact is that if you destroy the drive, you lose the drive, warranty and money!

  • Satellite 2450-201: update driver DVD - IDE #1 error

    Hello

    I need help to upgrade the dvd for my laptop model Satellite 2450-201 with internal dvd writer.

    I have LG and I got this message at startup: error IDE #1. Any suspicion that I speak with Dep. error tech and he said that the problem of compatible driver. I think that good performance with the system.

    If I update the bios from 1.3 to 1.5 it will solve this problem?
    Or do I need another brand name model to replace the old DVD with DVD - RW?

    Hello

    As someone from the tech, adj. suggested that this error message appears because the car is not compatible.
    The disc has a bad master/slave setting and so the BIOS can not recognize the drive.
    To resolve this problem, you must upgrade the laptop with compatible player.

    I found a compatible Toshiba PA3255U-1DV1 DVD-RAM drive. But this isn't a burner.
    I suggest to contact Toshiba service partner in your country to control the compatible player and supported. So you can be sure that you will get a good player.

  • Drive DVD RW E no longer works.

    Drive DVD RW E no longer works.

    I'm running a gateway T-1412 with Windows Vista Home Premium Service Pack 2

    DVD RW drive used to work fine, but now when I put music or a DVD in drive E that nothing happens. When I click on my computer and click on the E drive, it opens and tells me to insert a disc that has already been inserted.

    I have tried everything I can think of who isn't much so help is greatly needed.

    Thanks, Dan

    Hello

    Check with Support technique Gateway, their documentation and online drivers.

    Gateway drivers and downloads
    http://support.gateway.com/support/drivers/dlcenter.asp

    Technical support Gateway
    http://support.gateway.com/support/?cmpid=topNav

    Door Documents
    http://support.gateway.com/support/SUPINFO/index.asp?cmpid=topNav

    ---------------------------------------------------------

    You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burn
    and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

    Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

    CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
    tolerances. They may be delivered, but it is generally more economical to replace the disk.

    Several good info here:
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
    http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

    ===========================================

    This troubleshooting could not help if there is alignment and/or wear issues however it
    a shot.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • error message: "Please insert a disc into drive DVD D."

    I'm trying to copy files from my hard drive on a DVD. I put a blank disc and get the error message: "Please insert a disc into drive DVD D." have you tried several disks with the same result, & all are empty. The original files were on a disc & system had no problem at the opening of this disc.

    Hello

    Try this to Fix It: http://support.microsoft.com/mats/cd_dvd_drive_problems/ . Not exactly a rare problem in Windows 7.

    Let me know if this solves the problem for you.

    Kind regards

    BearPup

  • I miss my cd dvd drivers and have problems to find to resettle. Any help?

    I miss my cd dvd drivers and have problems to find to resettle. Any help?

    Go to the support web site of the company that made the PC (there they are hard inside) or the company that makes the cd/dvd drive itself if its an external drive (USB?). They provide the drivers for their hardware.

    Check on your support site relevant to the brand and specific to the model of your PC (or an external drive) and any provision supported drivers or software for the readers, should be there.

  • Drive DVD DVP3950/12 does not play the converted videos

    Hello!

    My DVD DVP3950/12 player plays all videos I converted (hand brake).
    In my description are no valid information for the videocodecs that I use and it has no details for resolution. And what kind of audiocodec is able to play on my player?

    Could someone help me?

    THX!

    cluesa

    Is the drive DVD DVP3950/12 a Toshiba device?

  • Help with the driver DvD Ram for satellite P10

    On my laptop (satellite p10) is Windows 2000 Professional running, but the driver DVD Ram of the Toshiba Homepage does not...
    Where can I get a driver that works on my laptop?

    Hi Val,

    The correct driver for your laptop running Wnidows 2000 should be version 3.0.8.0 and is available for download from the Web from Toshiba website.

    I presume that it is the one that you tried, so I don't know what you mean when you say that "it doesn't."

  • Satellite M40X driver PCI Device and NetworkController problem.

    Hello..

    I formatted my German original OS version for the English version. I downloaded all the drivers from the toshiba site and installed. The/CompuMgr/DeviceManger /AdminTools of /ControlPanel of system, I see that the drivers for the PCI Bus and network controller are missing.
    Any suggestion on which driver files may resolve this problem.

    Thanks in advance
    Shine

    Hello

    As Tobi said check the installation instructions. It has listed all the necessary drivers and tools and utilities. As far as I know this list is also important because it is a proper installation order.

    Good bye

  • Drive DVD (E) does not work in a HP Windows Vista Premium system

    When I install a DVD in drive E, nothing happens.  MagicJack is installed on the computer and using the DVD player as well.

    In the device - drive DVD/CD-ROM Drives Manager - Tiger Jet CD-Rom USB Device (MagicJack) and TSSTCorp CDDVDW TS-L633M ATA devices are listed.

    Apparently the MagicJack drive does not drive the function E.

    Registry Editor fix by removing the UpperFilter and UpperFilter and reboot, lines did not work.

    Thank you

    RBB

    Try uplugging your magic Jack for a few seconds and install it back, it can set up an another hardware profile and take a next unassigned drive letter. Or change the drive letter of your DVD drive assignment:
    Click Start-> right click 'Computer'-> manage-> click on 'Continue' on the prompt UAC-> in "Computer management" slot, click on "Disk management" "Storage". On the right pane, right click on your DVD drive and click on «Change drive letter and path...» "-> click on the button 'change... '. "under-> assign a new drive letter.

  • Cannot format drive DVD - Rw with Windows Vista.

    Cannot format drive DVD - Rw with Windows Vista. Download "Windows cannot format... or is unable to complete the format.  Something like that. See a solution with Windows 7, but I use Windows Vista. Help?

    Hello

    ·        What is the model number of your computer?

    ·        Who is the manufacturer of your computer?

    ·        Did you format the disc earlier?

    ·        Are you trying to format the drive using windows Explorer or through third party software?

    I suggest you read the web link, below he provided information related to the formatting of disk.

    http://support.Microsoft.com/kb/930405

    Hope the helps of information. Please post back and we do know.

Maybe you are looking for

  • Problem to install a service pack.

    I downloaded and installed the vista home basic one service pack several times... my update history tells me that its been installed successfully, but my update history shows it is not. Without it, I can't install SP2 I need. Help?

  • WRT310N no admin after firmware upgrade is

    I went from 1.06 to 1.09 and the router works, all devices, including wireless are able to access the internet. However, I can access is the GUI.   Before the admin access upgrade was configured to use HTTPS only.   After updating Firefox and Interne

  • I emptied recycle bin now I can't recover my photos and video what can I do to restore it?

    I recently cleaned out my trash and now I need to figure out how to restore

  • BlackBerry Smartphones support w/BB Curve

    I have synced my curve with Outlook 2007 and received many emails throughout the day.  The messages read as follows: This message is used to route data between BlackBerry and detained and a home server. Please do not delete, move, or reply to this me

  • How long should we keep logs archived in the comic book?

    11.2.0.4 DB Oracle Linux 6.5We have a database whose archive generation is as follows.Average of generation of archive log: 400 GB/dayMax log generation: 900 GB/dayArchive log diskgroup size: 4 TBBackup strategy: we take full backups on Monday and We