Driver for HP Color LaserJet MFP Pro M PCL 6

Similar Questions

• installed slow start with driver for HP Color LaserJet CM2320nf MFP

  I have Windows 7 pro 64-bit installed. After that I installed the latest driver for HP Color LaserJet CM2320nf MFP, my network is not initialize 2 to 5 minuets and the PC won't start any programs until it does. The printer works very well after starting my network it's just frustrating to have to wait this long. I have the printer plugged into my Intellinet router and the printer set to DHCP for IP setting. I asked HP about this problem and they can't help me because it is a software problem and not hardware related

  Edit: I have a program of snooper network called Netscan indicates the printer working group is "WORKGROUP" and my working group is "MSHOME". This would cause problems? I can't find a way to change the workgroup printers.

  Jim

  Hello
   
  Perform the check and the boot if the problem persists.
   

  To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: perform step 7 to reset the computer to start as usual after the boot process.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Hope that helps.

• need printer driver for HP Color LaserJet 3600n running Windows 8

  Need printer driver for HP Color LaserJet 3600n running Windows 8

  Click Next if you Win 8 pro 64-bit

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=501046&prodTypeId=18972&prodSeriesId=501044&swLang=8&TaskID=135&swEnvOID=4132

• Windows 8 driver for HP Color Laserjet CP 1215

  I have a search for the player above for a 64-bit computer running windows 8 pro.

  Hello

  Thank you for writing to Microsoft Communities.

  I suggest you to visit the following links, this could help you install the printer driver on the computer.

  Software & Driver Downloads - HP Color LaserJet CP1215 printer: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=us&dlc=en&sw_lang=&product=3422476#N166

  More information: Find and install printer drivers: http://windows.microsoft.com/en-US/windows-8/find-and-install-printer-drivers

  Install a printer: http://windows.microsoft.com/en-US/windows-8/install-a-printer

  Please follow these recommended steps and post if you still experience the problem.

• Color LaserJet MFP Pro 277dw: MFP will print but not scan since update Mac OS 10.10.5

  I had used my LaserJet MFP Pro wireless without problem for several years, with the Mavericks and Yosemite.  A few weeks ago a "update" the printer system is invisible.  After several hours of troubleshooting and to try five or six corrections, I finally got the printer online by using the IP address.

  My computers, however (a performer of the Mavericks and a Yosemite running), do not see the scanner.  It's not a question of adding - they do not to add it.  By HP support, I have reset the system print and tried to start over.  I downloaded HP Easy Print (or Easy Start or whatever), which is the entire site of support in the way of software for the 277dw of the ACM.  The software through me the entire upward and congratulated himself for a job well done, but my printer was not, in fact, related.  He appeared in the printers Control Panel, but would not print.  Just "connecting to printer" in the queue for ten minutes about until what I called off work.  And the scanner does not yet show in the Image Capture, preview or HP Easy Scan.

  So, I went back to my previous fix for the printer, use the IP address.  Any ideas on how to get the scanner appears?

  Hello

  Restart your router by unplugging its power for 30 seconds.

  Once it is fully up and you have internet access on your Mac reboot both the HP printer and the Mac.

  From system preferences, select Printers and scanners and click on the plus sign to add the printer again.

  Can you now ee he listed as Hello type or not?

• HP Color Laserjet 1600: Driver for HP Color Laserjet 1600 10 Pro 64-bit Windows

  When a driver available for the HP Color Laserjet 1600 for 10 64-bit Windows?  It printed fine with Windows 8.1, but since the updgrade Windows 10 it prints nothing.

  Thank you

  JN

  I answered my own question or find a temporary solution until the official driver is published. After a few successes and failures with different drivers HP Color Laserjet, I downloaded the driver communication USB LaserJet of HP (DOT4) of Windows 8 and higher (64-bit) , located at the link below.  It is listed for the printer HP Color LaserJet 3700 , but it worked for the HP Color Laserjet 1600 as well.  Hope it helps someone.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=315850&swLangOid=8&swEnvOid=4192

  Thank you

  JN

• CE712A: Driver for HP Color Laserjet CP5225 for Windows XP Professional

  I can't find a driver for my OP de Windows XP Professional 64-bit for my CP5225 printer. Can anyone help?

  In other words, the printer is connected to your network with a rj45 cable I guess.  If yes you must go to the information on the printer menu and print a Setup page that will give you the address ipv4 of the printer.  It should be something like 192.168.1.12 now on you computer xp go to printers and faxes and add printer.  Local printer and do not check autodetect, then and on this screen, click on create a new port and the menu drop-down select standard tcp/ip, and then click Next. Type the address of the address of the printer (ipv4) that was on the configuration page and just keep on going until you get to the page of decision-makers.  On the left choose HP and will work on the Strip right down to Color Laserjet 8550 PCL or PS as long as one or the other, and then click Next and change the name to HP CP5225 or whatever you want to call the printer and you can check on this page to make it your default printer.  Complete and you should now be able to print to the printer.

• Driver for hp color laserjet cp2025 windows 7 32-bit

  I just bought a refurbished Dell Optiplex 755 32-bit with Windows 7.   I have a hp color laserjet CP2025.  The icon appears in the devices & printers as indeterminate, unknown and yet no model. appears correctly as CP2025.  It has a USB connection that loads a driver automatically.  I can't print a page of test etc.  After I powered the system in place initially I was able to print a test page but after 200 or so updates, I can't do anything with the printer.

  Hi, I don't think that my printer USB of FYI is supported in the latest version of Windows 7.  TNX., Ray

• Multi-page scan to e-mail/network folder on dish (Color LaserJet MFP Pro 476dw)

  For scanning for send/network folder flat, sweeping setting failed to single page.  There is no option to set the scan multi-page either on the MFP or embedded web server page.  Any suggestions?  There will be a patch/update software?  Thank you.

  You can scan multiple pages of a scan from the tray by choosing settings first.

  The icon Touch scan-> scan-to - network-> choose the folder-> Touch 'Settings' which is at the bottom left of this window.

  At this point, you can change the file type, resolution, scan source, etc.

  Click 'Scan Source'-> 'flat' touch-> Touch "several pages".

  Then, you just press scan after the loading of your pages on the flat.  Good luck.

• Color LaserJet MFP Pro 277dw: hostname question

  I have problems printing using a Wi - Fi connection. I wonder if the host name is important. When I manually install, I get the next part:

  The model name is correct

  The IP address is 192.168.1.143

  Hardware address is 184F3293199C

  Host name is NPIC62308

  I have usnderstand everything but the host name.  There should no door on the router?  When I check the port settings, the specific IP address does not appear, just the hostname. It's not supposed me; I want to see is the ip address.

  Is it important or that I'm afraid for nothing?

  Thank you.

  You put the IP address of the printer in the location bar of a browser.

  With the HP printers you often get a warning that says that its a non-secure site because the printer has not a certificate, then click OK to continue if this happens.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• How to load the driver scanner for HP color LaserJet 2840 via ethernet

  I am trying to load the scanner driver for HP color LaserJet 2840 via the network. When I got to the driver download page, I have two choices. We're driver HP color LaserJet 2820/2840 PCL6, the other is HP color LaserJet 2820/2840 PCL6 Plug and scan/print driver Solution play I don't know which I should choose. So I downloaded both.

  Then I followed the instructions on this page... http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=. I have correctly installed the driver HP color LaserJet 2820/2840 PCL6. But I do not know if the driver drives the scanner. And I could not print any test page either. I don't know if I installed this driver properly.

  But when I tried to follow the instructions to install the driver HP color LaserJet 2820/2840 PCL6 Plug and scan/print driver Solution play, I was confused when I tried to select the .inf file. There are a lot of .inf files in the directory. I had no idea which one I should choose. Also, I tried to run the EZInstall.exe, but it seems to only support direct connection via USB and not via the network.

  Could someone help me with this? Please let me know which version of the driver should choose, and how do I load this driver.

  Thank you!!

  One supports network connections, the other being a pilot plug-and-play (PnP) is configured to initialize and works with a USB connection.

  Let me know if makes you better in the right direction.

  Have a wonderful day!

  -Spencer

• Color LaserJet MFP M477fdn Pro: M477 Software Installation fails at 99%

  Like others who have posted here, I have been unable to get the printer software to complete the installation. The printer is a Color LaserJet Pro MFP M477fdn, 3 months. I'm trying to install the software on a new workstation HP Z240 performing Windows 10 (64-bit). The connection is via USB cable. The printer and the software have been previously used with a Windows 7 machine without problem.

  I tried, repeatedly, to install the software from the disc supplied with the printer and also a 126.6 mb download HP Color LaserJet MFP printer M477 Pro series full software and drivers. The results are the same with a source - installation apparently progresses up to connect it the indicator product of progression from screen reached 99%, how it gives an error message "a Setup operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. "It takes about 20 minutes for the phase of installation to go from 0 to 99%, and then later hooked up to 99% for 2-5 minutes, the error message is displayed.

  I am able to print to this printer, but at least do not have the ability to scan from the computer there is no indication that the I.R.I.S. OCR software is installed.

  I had care of do not connect USB until you are educated.

  I tried repeating the installation without uninstalling first and get the same result.

  I used the uninstall contained the disk feature, and have deleted the printer to the computer using the Panel between the installation attempts.

  I tried to do a right click to run the installer as administrator and get the same result.

  I tried to install after clean boots with turned off Windows Firewall and all functions of the software Norton Internet Security including its function of firewall turned off.

  The event viewer displays none error entry at all and no entry identifies HP as the source of an event.

  I tried to connect via USB 2.0 and 3.0 ports.

  I cleaned recycle them and temporary folders.

  I have updated the firmware of the printer to the 20160331 version.

  Printed printer configuration report will not display any errors, nor that the printer itself indicates something is wrong and confirms the update of the firmware.

  I deselected the optional software, the devices experience HP and I.R.I.S. OCR, trying to install only the required files two more program scanning HP.

  Thanks for any help solving this.

  I think I understood the question, 10 windows installs its own driver, and the installation program expects the hp driver to install.

  DO this FOR THE HP INSTALLER PROCESS (when the percentage meter goes)

  1. go into the Device Manager and find the printer in the list of devices

  2. right click on the printer and select "Update Driver software"

  3. click on "Browse my computer for driver software".

  4. choose "Let Me pick one...» »

  5. Select the named driver: HP Color LaserJet MFP M477 PCL-6 Pro (make sure it's one with a dash between the pcl and 6!)

  6. click next and back to the installation of hp box and must now see the printer and continue the installation.

  -Alex

• Color LaserJet MFP M277 dw Pro: Setup disk gives an error and stops before the connection to the printer

  Hello

  I try to install the printer 'Color LaserJet MFP M277 dw Pro'.
  By inserting the disc into the phase "installation preparation" is 96% and then stops and gives me the error.
  I use Windows XP SP3. It is always installed, but physically disconnected another printer hp (hp 2050).
  (I tried both to disable the antivirus that reduce to a minimal install, but the problem persists).
  Thank you

  Response thanks a lot.
  In the meantime, I contacted the Support of the Italy
  Who suggested that I try to update the driver.
  I downloaded the file "HP_LaserJet_M277_PCL6_Legacy_Print_Driver_14295".
  Automatic extraction and I launched and everything seems to work.
  (I still try to scan and fax if they work).
  Thank you very much.
  Thanks to your colleague Michelle with whom I chatted.
  Contact thank you for the support of Milan that I don't know the name.
  So, I can communicate the solution found.

• Color LaserJet MFP M177fw Pro: Scan to Mac with Color LaserJet MFP M177fw Pro

  I bought and the latest drivers from hp installation a HP Color LaserJet Pro MFP M177fw. are downloaded and installed.

  I have a Mac and you connect wirelessly to the printer, which works very well. The Mac runs Yosemite 10.10.3

  My question is the digitization. There is no option for scanning anywhere, not on the small screen of the printer not on the usefulness of the printer or any where.

  Summer spend hours online to find an answer and is now well bored.

  I have already reset the disc printing, verified and repaired systems. Can not scan even with the options offered on the forums of hp using Apple caprure or preview. It seems that all these options include versions of OS X prior to Yosemite?

  I buy a multifunction printer that is not scan? I said to the saleswoman that I need a printer that can scan and airprint...

  Is it possible to scan to a mac at all with this printer? Any help?

  Hi @sa9494,

  I see that you have problems with scanning. I will definitely do my best to help you.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Color LaserJet MFP M177fw Pro)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  Here is a screenshot of what it should look like. You have the scanning through top tab?

  

  I have also included a document for HP printers - scan with HP Software in OS X v10.10 Yosemite.

  Scanning ports is not open on the router to the origin of this problem. You can contact the router company to verify and to open these ports 9220/9500/427 on the router.

  Connect the printer with the USB cable, to see if you have the same results.

  Let me know.

  If you appreciate my efforts, please click on the "Thumbs up" button below.
  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• Color LaserJet MFP M177FW Pro: 126 a Toner can be used with Color LaserJet Pro MFP M177FW?

  I recently bought a Color LaserJet MFP M177FW Pro and still have 126 a toner cartridges (magenta, cyan and yellow) for my LaserJet MFP M175 precedent. I can use them rather than the cartridges of 130a recommended?

  Hello

  Only 3 printers can use HP 126 has:

  http://WWW8.HP.com/us/en/products/OAS/product-detail.html?OID=4148379#! tab = compatible_hosts

  Kind regards.