Driver for printer Oki C5500 on Windows 7 64 bit
I have a HP desktop with Windows 7 64B. Is there a driver for the Oki C5500 printer available?
Hi guys, FYI for win 7 users. Once clicking on install new driver package, click Add a new printer. When looking for finishing the installer, it will display 1 oki driver who has a model number that don't own you (OKI OkiLAN8300e Rev04.01 10/100BASE, ect). Click on it. You will then receive the disk button. This allows to choose your model.
Installation instructions do not tell you this step and drove me crazy trying to figure out were the diskette provided button was and could not find the driver when I hit the Browse button.
One last note. these steps have worked for the installation of the network printer. These steps should work for installation of the local printer as well.
I hope this works for you and good luck.
Tags: Windows
Similar Questions
-
How can I get a driver for printer Canon I455 (my windows vista 32)
How can I get a driver for printer Canon I455 (my windows vista 32)
You can get this support from Canon... If they chose to take over the device in the given operating system.
Looking at the Website of Canon's Support for this printer and select your operating system, they * sentence * support with your particular operating system.
"This software is a module that extends the functionality of the printer driver for Canon inkjet printers. Your printer must be installed through Microsoft Update before you download and use this module. »
So, basically install you by choosing to look on the Microsoft Update site when you try to install the driver. It will download one Cannon gave to Microsoft after the release of Windows Vista. Then, you restart and download the other file (on-site support) to give you more features.
-
I need a driver for my Deskjet 1220C on Windows 7 64 bit
I need a driver for my Deskjet 1220C on Windows 7 64 bit
Install the driver with Windows update with usb to printer connection.
There is no downloadable driver available on the portal to suport HP for your printer. Available only for Windows 7 x 64 driver is provided by Microsoft.
-
Need driver for printer Canon BJC - 210 Windows 7
No further questions.
Windows 7 will drive a printer Canon BJC-210 (have the CD). It does not appear in the downloaded list. Also with windows XP (my deskatop).
Hi stlarry,
You will need to contact Canon, because they are responsiblie for Windows 7 drivers for their devices.
http://www.USA.Canon.com/consumer/controller?Act=SupportIndexAct
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Where to find the driver for printer Lexmark Z33 using Windows 7
I love this printer and want to use it for my daughter on his Windows 7 computer but cannot find a driver for it that works.
[Moved from comments]
Use Windows Update to get a pilot. Lexmark have nothing beyond 32-bit XP...
http://Windows.Microsoft.com/en-us/Windows/install-printer#install-printer=Windows-7
-
Cannot install driver for printer Dell 964 on Windows Vista
Separated from this thread.
I have triedany help would be aapericated God bless America. several times to install the driver for a printer, dell 964 on this vista without success
Hello
Please make sure that you use the latest drivers from the Dell printer support website and you have checked for solutions on the support page for your printer:
http://www.Dell.com/support/home/us/en/19/product-support/product/Dell-964/research
If you still can't find a solution, please ask in the forum Dell Pinters here:
http://en.community.dell.com/support-forums/peripherals/f/3528 .
If you do, make sure that you give complete information, including what is happening and the error messages in its entirety.
-
I need a driver for my 1280 Deskjet on Windows 7 64 bit
I always have a problem to find a driver for my printer Im HP Deskjet 1280 with Windows 7 64 bit operating system. Can someone help please.
I need it for my new computer HP Pavilion P6-2021UK.
Stem
What version of Windows 7 do you have? (Open a DOS window and type WORM.)
Try the following: start, devices and printers, adding a printer, add a local printer, LPT1: (just as a placeholder), then, and then click Windows Update. Your computer must be connected to the internet. It may take a few minutes for the current list, once it is click on the HP manufacturer (not HP) and scroll down beyond the Designjet 800PS printer Deskjet 1220C.
If for some reason you can't get the driver via Windows Update is also available on the Windows Catalog Site but this site is a little awkward to use. The HP 1220C driver can be downloaded from the Site catalog Microsoft Update here. You should not use IE, this site does not support other browsers. The x 64 version of the driver is the one who is 11.6 Mb, the smaller is the x 86 driver and the largest is for the rare IA-64 architecture. In this case, you save the file downloaded from the Microsoft website, and then extract the files into a working directory. When you add the printer select the option "have disk" and point to the file where the driver was previously extracted.
-
Driver for HP deskjet 1180c on Windows 7 64 bit
Hello, I searched high and low for a way to get my HP printer deskjet 1180c running on my computer that I have Windows 7 64 - bit race. When I look at "Support and driver, I see that HP has released no driver for Windows 7 and I don't understand why." The printer is not old. It's very frustrating.
If anyone knows of some drivers out there, or if there is a work around, I can try I would greatly appreciate your suggestions because that what it is this printer is useless for me.
Thank you very much.
Jon
I suspect that the drivers Deskjet 1220C would work for the similar 1180c Deskjet. Install the driver with "Add a printer", select the appropriate port and when the list appears, click Windows Update to refresh the list of available printers. Select printer HP Deskjet 1220C in the list. (The picture shows 1120c, which would be the second choice if the Deskjet 1120c driver does not work.)
-
Driver for the Officejet 710 under Windows 7 64-bit
Where can I find a driver to run my old Officejet 710 on my Windows 7 laptop?
It is connected via the Generic USB-parallel adapter. The connect Windows successfully installed"assumption of the USB printer"but fails to find a printer driver on Windows update. The Manual Installation procedure (from HP) fails to offer a 710-Win7 driver and a search of the HP Web site also fails to show a Win7 driver for 700 series. However, I found elsewhere on this forum (link at the end) the procedure to patch a 700 series driver works correctly undet 64-bit, so I guess a pilot must exist...
Can someone point me to a download?
Thank you.
Hello
I fear that the 710 Officejet is no longer supported by any superior to XP Windows.
The document above, refer to the Deksjet 710, which is a different printer model...
Only printers listed below are supported by Windows7, your printer is not as supported.
http://support.HP.com/us-en/document/c01992524
Kind regards
Shlomi
-
J1F08AA #AKL: Driver for HP 110-433 l windows 7 (32 bit)
I bought HP Desktop back someday l 110-433. I'm trying to get all the drivers, but simply find 64-bit. but, not 32-bit. Please, help ASAP...
ZeeHello
Installs:
RTL8188EE wireless 802.11b/g/n LAN drivers
http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66190.exe
Audio
Intel® HD Graphics driver for Windows * 7/8/8.1 32-bit
Kind regards.
-
Quick adjustment driver for a Latitude D630 with Windows 7 32 bit
I loaded Windows 7 Home Premium 32 bit on a Dell Latitude D630. Is there a compatible with the D630 AND Windows 7 Home 32 bit Dell QuickSet driver?
I tried to use the serial number, [ADMIN NOTE: Service tag deleted by the privacy policy], in order to obtain the correct driver from the quick set button, but the pilot was offered, R182249, would not load. The Dell site also does not list Windows 7 in the drop down menu to the operating system. R182249 is listed as pilot QuickSet for Vista 32 or 64 bit.
Any suggestions?
Thank you.
R182249 is for Vista 64 bit only; It will not work on 32 bit OS.
R180762 should load on Windows 7 32 bit, it worked fine for me on a D820.
To be more specific try unofficial driver all I listed here:
-
Windows 7 driver for printer OKI B2200
I'm looking for a driver to enable Windows 7 to print from an OKI B2200 printer. I can only find one for Vista which does not work with Windows 7
Hello Roger,.
If the architecture of the system is the same between computers Vista and Windows 7, for example, are all two 32-bit or both are 64-bit, then it should work in compatibility mode. If the architecture is different (a driver is a 32-bit system, and it must be for a 64-bit system), then the two pilots cannot talk to each other.
Assuming it's the same architecture, install the driver Vista and once installed right-click on the Vista driver and then select Properties. When this window opens, go to the top row of tabs and select the Compatibility tab and when that opens select run in compatibility mode check box and select the list of versions of Windows, Windows 7. Select apply and then OK to exit.
Post here if you need instructions more detailed, if not let me know how you fare.
Kind regards
BearPup
-
Because it's part of windows, why it does not help with the problem? Lived the installation with the Epson phone while technical assistance process what to do and they say it's faulty Windows.
Hi paul,.
What is the exact error message?
Check this box if this may help: http://support.microsoft.com/kb/315346
-
Driver for hp color laserjet cp2025 windows 7 32-bit
I just bought a refurbished Dell Optiplex 755 32-bit with Windows 7. I have a hp color laserjet CP2025. The icon appears in the devices & printers as indeterminate, unknown and yet no model. appears correctly as CP2025. It has a USB connection that loads a driver automatically. I can't print a page of test etc. After I powered the system in place initially I was able to print a test page but after 200 or so updates, I can't do anything with the printer.
Hi, I don't think that my printer USB of FYI is supported in the latest version of Windows 7. TNX., Ray
-
Need driver for Canoscan LIDE 60 WIA / Windows 7-64 bit
Cannot find this driver anywhere. Are there?
Scanner CanoScan Lide60
You must ScanGear CS 11.110 has from your regional Canon website. Look under Support for the drivers.
Maybe you are looking for
-
Cut and paste keys on the keyboard
Why person don't never had the idea to put one copy and paste the key on a keyboard (for example, the Microsoft keyboard). (similar to the back, forward, stop, refresh and house keys) It would be mapped (obviously) at and respectively and save me for
-
is popping up even though I do not copy even nothing at all. If I close the windows, it keeps popping up all the time. There is also no mentioned file... OS is XP
-
the Intel RST service in my vaio does not work. What should I do?
I have a sony vaio model VPCEB15FM. The Intel RST does not run. How should I do?
-
Hey guys, im getting really crappy download with my Linksys WAG200G speed (maximum download speed is 15 KB/s), which is less than dial up. I have the latest firmware I think which is 1.01.06 in date 17/12/2007. I changed the filter on the telephone j
-
Problem installing software for a purchased HP2544 today
Hi all I tried to install the software using the CD but I get a blue screen and memory dump came? I went to the HP website and downloaded the latest software and drivers for it, 64 - bit Windows 7, but I still get the same error during installation.