Driver for scanner 6678-ava acer for vista
I need a driver for VISTA scanner acer 6678-ava
Hi Carlos,
You can check the updates of Windows and see if driver updates are available for the scanner.
You can also use the disk provided by the manufacturer to install the drivers.
For more information, see the article:
Also see the article:
Working with the scanner and Camera Installation Wizard
You can also get in touch with Acer support and are looking for the same thing.
http://us.Acer.com/AC/en/us/content/drivers
Tags: Windows
Similar Questions
-
I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista
Hello
How to reinstall Vista
Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
HP scanjet 3400C - no driver for Vista
HP have - in general! -do not highlighted a driver for Vista for my scanner - I guess that it is in the logic of the "If you have more than 3 years, you should change" - However, this scanner worked fine until I got my new PC and Vista. Can anyone help with this?
I think Microsoft have a moral obligation to produce the pilots of these machines, because it's their OS that messed up things in the first place, but the fact remains that I have to use my scanner and I need help setting up. I tried to run the software as an administrator and enabled the option "Run in xp mode" but that no longer works.Help, please!
You answered your own question.
HP has not written the Vista compatible drivers for your scanner model.
And it is the responsibility of HP to write the drivers, because it is their product, not a Microsoft Product...
I agree with you; they are a disposable society.
Unfortunately, there is nothing we can do about it.
New models supposed to have more features and better.
See you soon. Mick Murphy - Microsoft partner
-
Tecra S10-106 - 3 G driver for Vista Ultimate 64-bit
Hello
I own a Toshiba Tecra S10-106. Due to the fact that Vista Ultimate 64 bit is much faster than Vista Business 32-bit, I would use Vista ultimate 64-bit operating system, but I can't find the 3G for Vista 64-bit driver. All the drivers can be downloaded from the USA in English and can be used in German, only the 3G driver is missing. Can someone send me a download link or tell me where I can find a driver for Vista-bit 66?
Thanks in advance.
Hello
You can download the drivers here:
http://Support1.toshiba-tro.de/Tedd-files2/0/3gdrv-20090303131409.zip
64-bit drivers are located under the Portégé R600 laptop.
Concerning
Phil
-
Re: Satellite P300D-12F PSPD4E: Driver for Vista 64-bit required
Hey,.
Hope you can help me...
Satellite P300D-12F (PSPD4E - 018001GR) is a portable computer that has a 64-bit processor...
So why I can't find the drivers on the page of the driver for Vista 64 bit?Hello
> Why I can't find drivers on the page of the driver for Vista 64 bit?
Maybe the 64 bit Vista drivers are not available at this moment, because this series is new to the market and the driver 64 bit Vista will be released in the near future.I think that it s just a matter of time when the pilots will be published on the European driver Toshiba page.
Not out of patience ;)
Good bye
-
Qosmio G10-105: standard VGA need driver for Vista
Hello
I want software for standard VGA graphics adapt nVIDIA GeForce Go 6600 for Vista
Please help me
I put t know what you mean by software for standard VGA graphic card, but I guess you a looking for a driver for Vista graphics card.
Unfortunately, Vista is not supported on the Qosmio G10 and F10 series and therefore a graphics driver doesn t exist on the driver page.
-
Satellite A200-1BP: need to display driver for Vista
Hi guys!
I have a satellite A200-1BP... that one must download a±? A± did not understand these = PSEAC, PSEA0...
So I installed one of them for vista... for geforce go7300.but my display driver has not changed... it still didn't give me that a± want a good perormans... A± couldn't play NFS carbon: (...) How can a± install my display driver for vista? help me... Please explain correctly and in detail
Thanks for your answers rigth now...
Hello
Additional numbers describes the series of laptop! There are different A200 series!
At the bottom of the unit, you will find the integer and you need only the first characters and numbers 5.Please choose the right Satellite A200 series and download the graphics driver on the right!
But the way in which; I don't know if the game performance will improve after the installation of the new graphics driver I've read somewhere that Vista needs a lot more material performance and that's why some games don t m runs smoothly.
In such cases, it s advisable to run and play games on Win XP operating system!
-
Konica Minolta PagePro 1350W Driver for Vista 32 bit
Anyone know where I can get the Konica Minolta PagePro 1350W Driver for Vista 32 bit Please? I downloaded a driver for Konica, but it does not work. I am trying to install my printer on Vista for the first time, and the link to Konica does not help! Thnx
LC OK
I found the problem. My coil was not managed properly; This is the reason why the file wouldn't install. So I decided, Konica, it is the right file. The PDF file is misleading.
I'm all set. Thank you for your patience with me and your help!
Aspen
-
Bizhub 160 driver for vista 64-bit required
I can't find anywere bizhub 160 driver for vista 64-bit. I found the driver for vista 32-bit, but not for 64-bit. is there a solution for this.
Hello
It is not possible to use specific drivers for a different version of the OS, because they will not get installed properly.
You can contact the manufacturer with the help of this link: -
How can I make a boot drive for vista 32 bit?
I am wanting to do a boot drive for vista Home premium 32-bit. How can I do?
Ron,
06/24 / 1108:18: 50 am
-
I need the sidewinder force feedback wheel 64-bit driver for Vista THAT have.
I need the sidewinder force feedback wheel 64-bit driver for Vista THAT have.
Thank you
Try Google.
-
DRIVER FOR VISTA OR DELL 1600N MFP PRINTER NOT TO "DRIVE" THE FUNCTIONS.
DRIVER FOR VISTA FOR DELL 1600N MFP PRINTER NOT TO "DRIVE" THE FUNCTIONS. MORE SPECIFICALLY: 1) I CAN'T SCAN; 2.) I CAN'T REDUCE THE SIZE OF THE PAGE WHEN I PRINT. (3.) I CAN NOT SEND FAX.
I INSTALLED THE RECOMMENDED DRIVE, BUT IT DOES NOT WORK. MY GUESS IS THAT I NEED TO UPGRADE VISTA TO A SUPERIOR VERSION OR A DOWNGRADE TO XP (WHICH THIS PRINTER WAS WORKING WELL ON).
http://www.google.com.au/search?hl=en&source=HP&q=Dell+Support&Meta=&aq=f&aqi=G10&AQL=&OQ=&gs_rfai=
Dell drivers and downloads.
http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support
Contact Dell printer drivers re OK.
See you soon.
Mick Murphy - Microsoft partner
-
Hmmm there at - it an Audio driver for VISTA GX620
Hi, is there an audio driver for VISTA 32 GX620 Optilex?
-
2903 B Adaptec driver for Vista 64 bit
My scanner Epson Perfecton 1200 s uses an Adaptec 2903 B card, Vista could not load a driver automatically.
Epson says contact Adaptec, and Adaptec says that since it is an OEM card produced for Epson, they provide no support.
They said that the driver for other maps of the 290 x series that use the same chipset 'may' works, but they are only for 32-bit systems. But they also say that the XP dirvers "can" work.
Unfortunately, mine is Vista 64 bit.
I hate you lose a very good scanner just because I had to upgrade to Vista. It manages scanning upward
In fact, Gloria, I found a way to support Windows 7.
Someone posted a fix for the same problem under Vista. Vista has a device (DJSVS) driver that can be changed by adding a line with the hardware for this card ID and it then works fine.
Although DJSVS is not included in Windows 7, a copy of it works fine here too.
A similar tweak was what was needed to get scanner driver works as well.
Certainly NOT for the faint of heart, though.
Do you know of any equivalent to DJSVS in Windows 7, which would allow users with no access to Vista do the same?
Thank you
Joe Hunter -
InPro Comm IPN2220 Wireless LAN Card - need driver for Vista OS
Hello
I'm new to the Forum and I think that it is just the place to get answers to my questions?
OK, I use the laptop Toshiba Equium L10 and I just downloaded and installed the "public" version of Microsoft Windows VISTA beta 2.
The installation went very well and it took about 40 minutes and considering that it is only a 1.50 GHz Celeron (M), which was very good, but I'm having problems to make a software/driver for my '' integrated '' InPro Comm IPN2220 Wireless LAN Card, so for now, I can not connect to the internet on this subject. (On the bottom of the laptop, it has ' FOXCONN T60N871 802.11 b/g W/LAN Card "which I think is the real name for 'InPro Comm IPN2220 Wireless LAN Card'.)I installed the software/driver LAN wireless from the utility CD, and although the software seems to be no problem, Windows does not detect the card and does not install the driver for it. I also tried Win Vista update, but nothing is found.
Does anyone know ho to get the software/driver to install properly so that Windows Vista can detect the card and install the driver and software?
If not, does anyone know of a driver updated for VISTA BETA2?
I would really like to keep Vista Beta2 on my L10 so if anyone has some tips that will get my built-in wireless card works, I would be very grateful. (BTW, I don't have a 'wired LAN').
Concerning
Hello
These days, a lot of users wrote vista and their experiences with the installation. As you know that officially there are no drivers available. I think that Toshiba will offer all the drivers at the point where vista is officially on the market.
You can post on this tread http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=13771 maybe Brave will give you more information about the installation on its L10.
Maybe you are looking for
-
iOS 10 calendar widget shows empty lines
IOS10 running on an iPhone 5s. Occasionally (not always), the calendar widget will display blank lines instead of the tests. for example, there could be 2 tests and 1 bday to show, but the widget will show 2 empty lines and a 3rd with just the icon b
-
MIDI keyboard entry out of semitone (gray 3/oxygen 49 MainStage)
Having a problem where my midi controller (version M-Audio oxygen 49 gray) is read by MainStage 3 (3.2.4) half-step out (C3 poster and sounds like B2, D3 as c# 3, etc.). 13 "MBP running 10.10.5, 2.7 GHz Intel Core i5, 8 GB RAM, 128 GB solid state Fun
-
How better to transfer files to one external drive to another
How to transfer files from one external drive to another?
-
I live in Baja California Surinamese no cable. You want to improve WiFi. Not sure how to interact with a POE. Tried to set up the airport without a bit of luck. Appreciate some feedback.
-
My computer is locked, the system to disable the code: 86944677