Driver for wireless Xbox 360 on Windows 7 (64) not appearing is not in the device after the installation manager.

is there nothing in the folder 'Microsoft Xbox 360' accessories in the start menu.

After installing 'Xbox 360 accessories software 1.2 64-bit for Windows 7", restart takes about 5 minutes which is unusually long.
I bought a (generic) wireless receiver and went to the Device Manager to update the driver and the only thing that appears in the category 'Microsoft Common Controller for Windows Class' is a 2006 (XBOX 360 Controller For Windows) driver that does not work. " There's no such thing as the newer drivers (already installed). What I'm missing here?
Any help with this would be much appreciated.

I got it to work. If pilots do not appear after installation, and you begin to notice the empty folders in your Start menu, it's because of permissions.  If you bought your pc used, ensure at their level of access to your account transfer system, you are the system administrator is not enough.

Tags: Windows

Similar Questions

  • I want to use my controller xbox 360, but windows 8 is not under operating systems, what should I do?

    I want to use my controller xbox 360, but windows 8 is not under operating systems, what should I do?

    Plug it in and let the auto drivers install.  I use mine all the time.

  • Internet security Windows 7 will not allow the installation of Flash Player 17 update

    Internet security Windows 7 does not allow the installation of the update of Flash Player 17.  I tried the direct installation using the IE_AX update without success.

    The procedures described in the last link enabled the update of Flash Player be downloaded and installed.

    It is regrettable that Windows IE seen Adobe as being an unreliable Site and requires a temporary user disable the security settings for the update to proceed.

    Thank you for your help.

  • Windows 7 does not recognize the installation discs

    Hello

    I have a problem, and I don't know if there is a solution, but here goes.

    My laptop is a HP DV6-7029WM Windows 7, 64 bit.

    The hard drive was dead, and he was replaced last month.  I sent it to HP.  C is the hard drive, and was originally the recovery on D. Removable media were on E, and when I connected a USB stick or memory card reader it would on F.

    When I came back, hard drive was on C as it was originally, and there was no recovery drive D. D is now my removable media drive. When I put in a USB stick or a memory card reader, which is now on the E drive.

    After I bought this, I put the recovery on a USB key, but I've accidentally thrown out. (My mistake) So I ordered the installation diskettes after that I return my HP PC.  I had 2 DVD system recovery disks and an Application and a recovery DVD Drivery.

    I want to reinstall Windows back to the default settings. I put disc 1 (System Recovery DVD) and close.  I reboot and it goes directly to the office. I hear the whirring disc, but nothing happens.

    I go to the control panel > Recovery > advanced retrieval methods. I click on restart, and it loads files and then says DVD set, which I do. He told me that he does not recognize the installation disc.

    I googled this problem and found a poster on CNET that had the same problem as I do. Also, I can't do a system restore.  My problem is the same as this poster on CNET.  I can read DVDs and CDs.  Those that work very well.

    http://forums.CNET.com/7723-19411_102-568059/Windows-7-installation-disc-not-recognized/

    The files are on the DVD, because I see them.

    I don't know what to do. Should I send my PC back? Can I do to solve this problem?

    Thanks in advance.

    pen

    Hello:

    With recovery disc 1 into the DVD drive, restart the computer and at the beginning of the HP welcome screen, press the ESC key to display a menu of options.

    Select the F9 boot menu option.

    Select the DVD drive on the list of bootable devices, and press the Enter key.

    Watch the screen for additional instructions.

  • Beyond bandwidth USB - for wireless XBOX 360 USB controller adapter

    When I plug in the adapter for a XBOX controller wireless I get the message: USB bandwidth exceeded.
    It seems that the receiver is trying to monopolize an incredible part of the bandwidth. I need only to run a single controller.
    Is it possible to say to the adapter does not get all?

    It is impossible to disconnect other USB devices. The device that seems contradictory e b is headphones Razer Megalodon (my only sound source).

    I found my problem.  Given that the mine has been specifically with headphones, I spent a day about making term research trying to find the problem.  The problem with mine was that the 360 adapter tries constantly to receive voice entering, even if none is present.  So when I tried to use my USB headset, basically, I was trying to use two different USB audio devices and Windows wouldn't not just that.  So I gave the 360 receiver since I cannot tell to not search for audio / voice and have ordered a playstation 2 controller adapter.

  • can I use my controller for wireless xbox 360 in fsx and if I can do what I do

    Hi I just installed fsx, and he says that I can use my xbox controller.

    How can I install my control of xbox 360 Wireless for my computer windows vista laptop?

    Hello

    I suggest you to connect the XBOX 360 controller to the PC and it will automatically get detected by FSX.

    To connect the XBOX 360 PC controller refer to the link below.

    http://www.Microsoft.com/NZ/DigitalLife/gaming/how_to_connect_an_XBOX_360_controller_for_windows_to_a_computer.mspx

  • E-mail/password reset for an xbox 360. Windows Live support is me misleading to their moderators, etc. I need some help here!

    I need a password reset on an old e-mail account linked to my xbox 360. (the enamel of related Xbox Live account). However after going around in circles with the xbox and Windows Live support person will help me. I have provided more than enough evidence that its me (old/new address, debit card info AND xbox console ID AND serial number for information). And I am NOT to START a NEW GAMERTAG due the fact that I have spent money under my current gamertag. Now they are misleading me to the moderators of Windows with this problem. So now what?

    E-mail bellsouth.net and its related help/support page has since been purchased, reformatted and dissolved for their new name like ATnT. Their support tech/operators won't help me as well since it is a problem of bellsouth and not an ATnT. But the email is bellsouth.

    I can't do any kind of password reset because I forgot my secret question answer. A mistake in good faith, but one that keeps this issue to be resolved. I have provided a list of answers to him but still no help and I keep getting turned down and rejected.

    Windows answers forums are for technical problems and we do not have any control over the resets password for all Windows, XBOX and Windows LIve accounts.

    You will need to contact Windows Live Support as Kim said.

    http://windowslivehelp.com/product.aspx?ProductID=15

    Thank you

  • Windows XP could not load the installer for battery on Satellite P20 S103

    I have the above problem, I already downloaded the driver for the power manager here I do not see a battery?
    I can't find it on the site of toschiba
    the battery number is PSP20E 000XHV-No.

    I hope somewone here can help me with a driver or something I really don't now where to look further.
    Thanks in advance
    Wouter wally man welcomes wouter from Holland and canada at this time

    PS the operating system is windows XP to meet just more information

    Hello

    What do you mean by "I don't see a battery? Usually, you should always to be able to see the State of the battery, if you disconnect your computer from the power supply.
    The powermanager manages just what powersaving profile is loaded when boasts a particular situation or condition (as full power or watch DVDs, etc...)
    Cut just AC power to your PC and you will see the battery symbol.
    Please clarify your question.

    Welcome them

  • Computer won't install software not driver for wired XBOX 360 PC controller

    When I plug my controller after after installing the software on the CD-ROM that accompanies it, it says "Driver software Installation" then said he failed.

    I'm not sure of your operating system

    Try here

    http://www.Microsoft.com/hardware/download/download.aspx?category=gaming

    MOS

  • 4530 s: Windows starts do not and the installation is also not be completed

    My laptop was turned off when starting, once I'm not able to start again, I try to install windows 7 but it gives errors when installing when it comes to fill and repair also does not help. Kindly help.

    Then you need a new hard drive.

  • Windows (8) could not complete the installation.

    I just bought a new HP2000 today. I get home and start of implementation. At the end of the process, when it * must * be showing me the office (or whatevert, they call the thing in W8), I get this error message. I click 'OK' and it reboots and starts the whole process. How "complete the installation?

    I'm about to take over and get a gateway or a Toshiba!

    Try running a system recovery tapping away to the F11 key, immediately after switching on. It's just to rule out the possibility of a flaky installation which can be corrected by a factory reset.

  • receiver wireless Xbox 360 for windows works do not at all

    Used the receiver wireless xbox 360 for windows for a long time, worked well. Unplugged to move the pc, when I have not reconnected no light on the receiver, windows not see or does not detect. Uninstalled the drivers, tried different usb port, nothing seems to work. What can I do? Thank you

    Hello

    Thanks for posting your question on the Microsoft community.

    Thank you for details on the issue.

    This problem may occur because of corrupted or incorrect settings of the Xbox controller. This can also happen because corrupt Xbox software.

    I suggest you use the steps in this article and check if it helps.
    Reference:
    Xbox 360 Wireless Gaming receiver for Windows
    http://support.Xbox.com/en-us/Xbox-on-Windows/Accessories/Xbox-360-Wireless-gaming-receiver-Windows#63a0adf333cf44a5b202fb55b8e3054e

    Please also day Xbox software from this link and check.
    Reference:
    https://www.Microsoft.com/hardware/en-us/d/Xbox-360-Wireless-Controller-for-Windows

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Wireless Xbox 360 Controller for Windows all of a sudden not connect into any USB port

    Original title: Wireless Xbox 360 Controller for Windows issue.

    Hi, I bought this back in 2008 and it has been flawless since today... I tried to use it and the controller is unable to connect to the receiver.

    There is no light on the receiver, even when I plug it into a different USB port there is still nothing... I even tried another computer. I assume the receiver is nakered?. Can anyone shed some light on this?

    If the receiver is so broken, can I buy this receiver on its own and that it will be compatible with my wireless controller Xbox 360 instead of having to buy another expensive controller...

    Thank you very much.

    Hello

    I suggest you to post your questions or comments about the Xbox 360 Forums, so that you will be provided with the assistance of your Xbox 360 product.

    Link: http://support.xbox.com/en-US/xbox-360/browse?xr=shellnav

    Hope this information helps you.

  • Computer cannot detect the receiver of wireless Xbox 360 for window controller.

    Hello Microsoft,

    After I have tool on my computer for cleaning, the receiver of wireless Xbox 360 for window controller is not detected when I tried to plugged into computer. I have already downloaded new version 1.2 which is supported for Win 7 (64-bit). It still does not work. I tried to go to an another USB 2.0 but it's the same thing. Please help me. Thank you.

    Hello
     
     
    1. are you able to use the USB ports with other devices usb successfully?
     
    2. What is the status of this device in the Device Manager?
    See the links below for help on Device Manager.

     
    You may need to reinstall the hardware on your computer. To install the software by downloading it from the Internet
    a. go to the download section of website material Microsoft game software by following this link:
    http://www.Microsoft.com/hardware/download/download.aspx?category=gaming&type=gaming
    (b), select the type of product, select controller.
    c. in, select your product, select Xbox 360 Wireless Gaming receiver for Windows.
    d. in, select your operating system, select the version of Microsoft Windows you are using on your computer.
    e., select your operating system language, select the language used by Windows on your computer.
    f. click OK.
    g. click the link to start the Setup program.
    h. click on run.

    Xbox 360 accessories Setup installs the necessary files on your computer.
    Note: You may be prompted to restart the computer.

    You can also check out the article below which explains how to install this equipment.
    How to connect a wireless Xbox 360 controller or headset to your computer
    http://support.Xbox.com/support/en/us/NXE/KB.aspx?ID=933710&lcid=1033&category=hardware
     
     
    Hope this information was useful.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • problems of xbox 360 with windows xp sp3 wireless receiver

    problems of xbox 360 with windows xp sp3 wireless receiver

    Hi Frank Lucas.

    (1) if it works well before?

    (2) remember to make changes?

    (3) you get an error message?

    You can see the steps outlined in the article below

    Troubleshooting your Xbox 360 Controller for Windows

    http://support.Microsoft.com/kb/908888

    You can also post your query on Xbox Forum

    http://forums.Xbox.com/

Maybe you are looking for