Driver of HP Photosmart 5510-e

Similar Questions

• do not install the driver for XP photosmart 5510

  I tried in vain several times to install the driver for my refurbished XP for my laptop HP photosmart 5510. I said I want to install via radio - he finds the printer and lets me select - then it starts the installation.  It gets about two-thirds through the bar of "installing network printer." "and crashes.

  I let it rest, go to walk my dogs, prepare dinner, and it moves of there.  When I click on cancel, it crashes during the phase cancellation and I'm relegated to "force quit" process.  It's annoying!  All I want to do is wireless printing.  Scanning the computer would be an asset.

  BTW, I had NOT of PROBLEMS installation on laptop of my wife under System 7.

  Help, please... Thank you

  Docswan

  Hi docswan,

  I can't wait to hear that you are experiencing installation problems.  The following steps may resolve this problem. You can also view documents related to this issue by clicking here.  If you are unable to install the full features software, a generic driver can be installed via windows to enable printing only.  Here is a link that will provide the steps to do this.  Click here

  1. connect a new printer.

  2. the software freezes when "control network.

  3 allow software to sitting there for 3 minutes (to fill in the background).

  4. go into the Task Manager process tab.

  5. complete the process of HP network Communicator.

  6. This should push the software to a point to choose wireless or Ethernet.

  7. Select Ethernet or wireless depending on connection.

  8. Enter the IP address manually in the appropriate box.

  9. the software freezes probably during the 'network of control' all or part way through.

  10 allow software to sitting there for 3 minutes (to fill in the background).

  11 go into the Task Manager process tab.

  12. end of the process of HP network Communicator.

  13. This should push the software before saying that the printer cannot be installed correctly, but can be installed via the IP address.

  14. click "continue".

  15. the software should continue and give a green check mark.

• Remove a hard drive in Photosmart 5510

  I have a Photosmart 5510 which is broken. I want to recycle, but I heard that it can be a hard disk of the printer which can record personal information. How to remove or destroy the HD before I take it to the recycler?

  Hello

  There is no such drive hard, but if you wish, please restore it to factory settings as follows, from the printer control panel:

  Key setting, then Tools then Restore Factory Defaults (you may need to scroll down to see this option)

  The printer will restart and return to its original settings.

  Kind regards.

• driver installation failure on photosmart 5510

  I am trying to install my photosmart 5510 on a new computer, Windows 7 (64 bit) operating system. everytime I try and go through all the steps of downloaded I get an install error - failure of the HP Installation - MSI 1603. Cannot get past. The printer is configured on a wireless network and that works, just can't get the driver to install. I tried to remove the program and he can't delete because it is not installed correctly. It seems very circular. Any ideas?

  These install failures can be no fun. Looks like you may have a few things underway.

  You indicate that the software cannot be uninstalled. Where are you try uninstalling to?
  * The best place to remove the HP printing software that won't remove is through the control panel > programs > uninstall a program.
  * If the printer software still cannot be removed in this way, you can find a Microsoft Fix It solution. This program will help with software that will not uninstall.

  Also, you have found the failure of Installation of HP - MSI 1603. It is indicating that one of the MSI (Microsoft Installation) files fails to run. MSI often fail if the permissions are not correct as well.

  There are a few measures that take to this error:
  * Press Windows + R key to the "Run" command
  * Type msiexec.exe to confirm MSI Version 4.5 or higher. Below if the 4.5 Version, stop here and answer to get instructions on how to update MSI.

  If MSI Version 4.5 or higher:
  * Press Windows + R key.
  * Type msiexec /Unregister and press ENTER. If it works, there is no message.
  * Press Windows + R key.
  * Type msiexec /regsvr and press ENTER. This will confirm that the MSI is working.

  Remove all remaining files:
  Open the C: drive > Program Files (x 86) > HP folder
  * Delete the folder with the Photosmart series 5510 in the title. It is to ensure that all remaining for the printer software has disappeared.

  * Press Windows + R
  * Type %temp% , and then press ENTER.
  * Delete all files starting with 7z. It's remove for installation failed installation files.

  Now to install in:
  * Make sure you are using the administrator login
  * Download the most current driver for your printer.
  * When you run the downloaded file, make sure you right click and click on run as administrator.

  Photosmart HP 5510 is not that old of a printer. I guess that this printer is still under warranty. If these steps do not address the issue then give the HP Technical Support a call at 1-800-474-6836.

• Photosmart 5510: photosmart 5510 doesn't scan

  My Photosmart 5510 left scanning for computer (HP Pavilion with wireless connection). I get a msg of unsuccessful scan from the printer and an HP 5510d series is not found msg on my computer.  He still won't print.     I restarted everything.   When I opened the printer from start I get a box Priinter configuration and software with connect a new printer and add more software options.   A ran the full feature software and driver and get msg that I need to insert the disc and the earlier version cannot be deleted.   Ran print and scan doctor and it says Installer get full software not installed.  I don't know what else to try.

  Hi @dmorfy,

  There is a utility called Microsoft mount it that might be able to help to uninstall the old version of the HP Photosmart from your PC software. It is pretty Strait before running.

  Once it's done try to reinstall the software.

  Please let me know how it goes.

  Thank you!

• Problem connecting USB to install HP Photosmart 5510 all-in-one inkjet

  Photosmart 5510 all-in-one inkjet

  Windows XP Pro x 86 (32-bit) service pack 3

  Software installs fine until he asking for the type of connection. The computer does not have wireless so I select USB connection and it fails every time. If I select to connect to PC later and plug in the USB, Windows detects new hardware (HP 5510) and asks where to look for drivers. When directed to the installation CD "Invalid data" error when copying files. In the Device Manager in the USB section it lists the Photosmart 5510 with a yellow! Selection of reinstall the driver results in an "impossible to install error.

  There is no other printer currently installed on the computer and the 5510 Photosmart is set as default printer. So far I have;

  tried different usb ports

  tried running the installer from the installation CD

  I tried to download updated drivers

  tried to install with disabled firewall and antivirus

  tried to install it in safe mode

  Same problem occurs every time. Any solutions or suggestions would be greatly appreciated!

  Thank you.

  Finally solved the problem. Had an old Pentium 3 machine around the pose and decided to try to change the disk hard on and see if I could install the printer with a different material.

  It turns out that the mup.sys file, which has something to do with PnP devices, has been damaged and Windows wouldn't start in the other Tower. Then, I took out the HARD drive and put it back in the Dell can reformat Windows XP and guess what, printer installed without a hitch the first time I tried! Now I have to reinstall everything on the computer * sigh *.

  In any case, the printer problem fixed!

• Device - CANNOT CONNECT HP PHOTOSMART 5510 COMPUTER USING WINDOWS 7

  I need help in establishing a HP Photosmart 5510 to my laptop that is running Windows 7.  Can I connect the printer to my iMAC with no problems whatsoever, but I can't connect to my laptop.  It says thay there is no driver available for this printer. I also tried the HP website and they don't recognize the printer.

  Help

  When you are in the printer with the connected printer Add Wizard, select Windows update.

  It will take more than 5 minutes to get a list of printers that are updated.

• HP photosmart 5510 won't print black

  I have a photosmart 5510 which do not print black. All other colors are OK. Have changed cartridge and went through all the steps on the site of diagnosis without success.

  I really need to turn it on. Any ideas gratefully received.

  See you soon.

  Here is a link that can help you with this problem. It can a be a print head.
  http://goo.GL/OTmPV

• Photosmart 5510: customer paper size

  Hello world

  I have never posted on a forum before, but I'm about to have a magma down! I try to print my wedding invitation. they are a custom size of 19.7x13.9 cm., I tried to add the custom paper size by following the instructions on the other posts, but this has not worked. paper/output is missing from the advanced settings.

  help would be greatly appreciated because I alsways bought of HP printers, but if I have to buy a new one for that I won't buy HP I'm worried sick have the same problem.

  Thanks in advance

  Hi @lilrhi,

  Welcome to the HP Forums!

  I see you are trying to print on paper 19.7 x 13.9 cm with your printer HP Photosmart 5510, on Windows 7. And I'm happy to help you!

  According to the specifications of the printer, it is not a supported paper size. The paper sizes supported for this printer are:

  Type of paper

• HP Photosmart Premium C309g: 10 Windows printer driver for HP Photosmart Premium C309g

  Where can I find a Windows 10 driver for HP Photosmart Premium C309g printer?  I tried the Printer Wizard and it didn't work.  Thank you

  Thanks, it worked!

• Photosmart 5510: Out of warranty 5510 won't print black

  My Photosmart 5510 off-warranty will not be printed in black and color blocks on the test page are weak and upholstered.  I have responded to customer cleaning tips with no improvement.  Not enough messages about the problem detail advise to proceed.  What to do next?

  Greetings @HLDLC,

• HP Photosmart 5510 'Printer offline' show

  To the right,.
  
  I started having a problem with my HP Photosmart 5510 - running on a Mac OS x 10.6.8 computer wirelessy.
  
  Until yesterday, I was able to print wireless towards her, even when he was asleep he wakes up and print.
  
  Now, however, I get a "Printer offline" message whenever I try to print what he's awake or not and I have to turn on the printer and on again before it prints.
  
  My printer HP utility can see the printer and it is connected to my network.
  
  Any help would be appreciated,
  Thank you
  Ronan

  I found this on the Apache site:

  "You unexpectedly see an Apache HTTP Server installation page when you visit a Web site. If you sent us mail because you have seen a page saying "it worked!" (or something similar indicating that Apache has been installed) on your screen or a Web site you have visited, please go back and READ the page. It must also specify what happens. The page is the equivalent of a demo or the Readme file from a Windows installation of the application; It is intended for the person who has installed the software and is supposed to show that the installation has been completed successfully. The problem you are experiencing has nothing to do with us, and we cannot help you. You must contact the webmaster of the site. If the site is www.foo.com, for example, try to send mail to . If it is www.toddsbeer.org, send an email to . And so on. »

  I think that there is something funny, with (probably your DNS of ISP) your router's DNS settings.  You can enter the configuration of the router and change the google DNS or OpenDNS DNS?

• HP photosmart 5510: hp photosmart 5510

  I have trouble scanning photosmart 5510 on my PC since I installed windows 10: there is no problem with the software, but pinter them cannot see the PC

  Hello

  try to install the most recent to win 10 S/w

  http://ftp.HP.com/pub/softlib/software12/COL39102/MP-108875-4/PS5510_1315-1.exe

• This issue is still pending. My PhotoSmart 5510 continues to go offline during the generation of printed documents.

  I have a PhotoSmart 5510 and a Toshiba i7 Quad 4 laptop running Windows7 with a Trendnet Wireless router.

  My PhotoSmart 5510 disconnects when printing is generated.    All systems are go: online wirelessly connected wireless, does not not offline, set as the default printer, checkmark, etc..  Sometimes it will make an impression and disconnect and sometimes it will disconnect the first time and will not be printed.

  If I run the diagnostic utility I can usually get it online.  But the said diagnostic utility it is disconnected and the problem is not "resolved".

  It also has a problem with the USB.  If I've set up as a USB printer will crash the entire operating system and laptop computer will not restart unless the USB is disconnected or if the printer is turned off.  This does not happen with my laptop computer on the same Lexmark printer.

  obewan,

  This article should help to keep the Wi - Fi connection (including things like setting a static IP address for your printer to avoid the crash between you OS/router/printer):
  http://support.HP.com/us-en/document/c02817031

  Give the steps described a try and tell us if it helps.

  Good luck!

• Photosmart 5510 - wireless Mac - printer offline

  Hi there, I am trying to print from a Mac again photosmart 5510, wireless is connected, tested printing via an ipad - runs like a dream.  Unable to print message error "printer is off-line" laptop (Mac 10.7.2), the printer is not connected.  Printed with a cable but I can't via wifi. Have checked all troubleshooting tips, no luck.  advice is appreciated

  Download and install this: http://support.apple.com/kb/DL907

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.