DRIVER PROBLEM WITH CANON SMARTBASE PC1210D when INSTALLING ON WINDOWS 7 RC 64 - bit EDITION

I RECENTLY INSTALLED WINDOWS 7 RC 64 bit EDITION, WORKS FINE BUT IT WONT LET ME INSTALL MY CANON PRINTER DRIVER SMARTBASE PC1210D I HAVE TRIED to INSTALL all THE DRIVER FROM THE CANON SITE, ALSO WINDOWS UPDATE cannot FIND ANY DRIVER.
I ALSO INSTALLED THIS PRINTER ON ANOTHER PC WITH WINDOWS XP (IN NETWORK) IT WORKS FINE ON WINDOWS XP, IT SAME USED LET ME INSTALL AS A NETWORK PRINTER SHARE.
ANY HELP WOULD BE APPERICATED
Thank you

http://social.technet.Microsoft.com/forums/en/category/w7itpro/

Link above is for Windows 7 Forums.

This is the place to ask your questions Windows 7 partners.

The driver problem is not to do with Microsoft.

CANON has written drivers for their products.

If CANON does not write a driver for your model of printer for Windows 7, there's no.

Try a Vista of CANON printer driver. If no available Vista printer, or it does not work, you are out of luck.

And gently, do NOT enter capitals,

Here is the Vista Forums.

See you soon. Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • Problem with installation if updates when installed

    Hello

    as I fought with some problems with Agents, I have studied the docs again.

    That's why I said - allright get later reinstalled (patched) Version the Enterprisemanager.

    When installing, I chose "(obtenir les mises à jour)." These where downloaded, rebooted interfaces.

    However, the installation runs in an error:

    INFO: oracle.sysman.top.oms:stty: Standardeingabe: Unpassender IOCTL (I/O-Control) as das Gerät

    INFO: oracle.sysman.top.oms:stty: Standardeingabe: Unpassender IOCTL (I/O-Control) as das Gerät

    INFO: oracle.sysman.top.oms: enter the SYSMAN user password:

    INFO: oracle.sysman.top.oms:stty: Standardeingabe: Unpassender IOCTL (I/O-Control) as das Gerät

    INFO: oracle.sysman.top.oms:stty: Standardeingabe: Unpassender IOCTL (I/O-Control) as das Gerät

    INFO: oracle.sysman.top.oms:Verify:

    INFO: oracle.sysman.top.oms: Enter password: SYSMAN

    INFO: oracle.sysman.top.oms: process_id:mve1rmclp7j2

    INFO: oracle.sysman.top.oms: [Initializing the RCU Runner MA, run the Action of schema, schema successfully completed Action]

    INFO: oracle.sysman.top.oms:Die Befehlsausfuhrung transx wurde mit dem status 0 sky

    INFO: oracle.sysman.top.oms:process_id:13nzs6kxz2aqx

    INFO: oracle.sysman.top.oms:Failure...

    INFO: oracle.sysman.top.oms:1 or the mistakes that happened in the exercise of the action:

    NEWS: oracle.sysman.top.oms:1):

    ORA-04063: Discovers "SYSMAN. "MGMT$ PA_RECOM_METRIC_SOURCE" contains Fehler

    File: / U02/app/Product/middleware/WHO/SYSMAN/admin/emdrep/SQL/Core/latest/patch/REC/patch_recom_grants. SQL

    Statement: GRANT SELECT ON MGMT$ PA_RECOM_METRIC_SOURCE to MGMT_VIEW

    INFO: oracle.sysman.top.oms:The plugin Repository Configuration failed his method

    And stopped :-(

    Is the code of the view:

    Select

    p.patch_uid as patch_guid,

    p.patch_id as a hotfix,

    p.Abstract as abstract,

    p.classification as the classification,

    t.target_guid as pa_tgt_guid,

    t.target_name as pa_tgt_name,

    t.target_type as pa_tgt_type,

    t.type_display_name as pa_tgt_type_display_name,

    Host.target_name as host_name,

    Host.target_guid as target_guid

    Of

    mgmt_targets host,

    gc_assoc_instances has,

    MOS$ PA_FINAL_RECOM f,.

    MGMT$ ARU_PATCH_RECOM_MD p,.

    mgmt_targets t

    where

    Host.target_type = 'to host '.

    and host.is_group = 0

    and a.assoc_type = 'hosted_by. '

    and f.patch_uid = p.patch_uid

    and f.target_guid = t.target_guid

    and a.source_me_guid = t.target_guid

    and a.dest_me_guid = host.target_guid

    The Table MGMT$ ARU_PATCH_RECOM_MD does not exist - this seems to be the cause of the failure

    Is this a known issue?

    And if so - no work around?

    THX

    Christian

    Edit:

    I checked it on a system installed without the upgrade option selected.

    The table ARU_PATCH_RECOM_MD $ MGMT are here.

    It is being investigated as a bug by our quality assurance team.  For now, please ignore the automatic update and installation should proceed to problem.

  • Problem with Canon printer LBP-810 installation in windows 7

    I try to install my Canon LBP-810 on Windows 7 Ultimate 32 bit.
    The printer has a USB and a parallel port interface. I use the USB interfaces.
    On the homepage of driver Canon, I found a driver that declare them will work with Windows 7 32 bit.
    http://software.Canon-Europe.com/products/0000552.asp
    When I connect the printer to the UBS, it is not detected.
    I tried to say just to add a printer in the printers and devices window, but it won't work.
    I don't know what port I should choose. There is no available USB port.
    Should which port I choose?

    My other printer an old HP 720C on one cable UBS / parallel installed fine.
    Canon printer worked fine with Windows Vista.

    Help, please

    Jens

    Hello

    Here, you first need to connect the printer and check in devices and printer and also you must check in Manager devices if the printer is detected.

    If you have installed the printer drivers on your computer then, I recommend you to uninstall and reinstall the drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.

    1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and
    Maintenance and then click Device Manager. If you are prompted for an administrator
    password or confirmation, type the password or provide confirmation.
    2. in Device Manager, locate the device, and then double-click the device name.
    3. click Driver tab, then click on set to update driver and follow the instructions.

    Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Tips for solving common driver problems
    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

    Thank you, and in what concerns:
    I. Suuresh Kumar-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • 420 HP 2000 ca: driver problems and hotkey on a new install of windows 7 on a HP 2000 420 ca

    Hello, new here, long story short:

    LAPTOP MODEL IS: HP 2000 420AC

    1 REINSTALLED A BRAND NEW HOME FOR WINDOWS 7 64 BIT.

    2. DOWNLOADED/INSTALLED ALL THE DRIVERS ON THE SITE OF HP FOR THIS MODEL.

    3. THE DRIVERS WIFI/wireless connection would NOT MOVE, I GET a MESSAGE READING "802.11.a/b/g/n wireless device not found adapter. The device may not be present or could have been ejected/disconnected from the system. Abandonment of the installation, please insert the card and try Setup again."

    The wireless card was not removed from the system, in fact, the laptop was never even opened.

    4. THE SHORTCUT KEYS DO NOT WORK TO TURN ON WITHOUT WIRELESS/WIFI, OR VOLUME CONTROLS, SCREEN BRIGHTNESS OR... THERE SEEMS TO HAVE NOTHING TO DOWNLOAD/INSTALL IN THE LIST FOR THOSE NOT MORE, A LACK OF FUNDAMENTAL TO THE SYSTEM. WITHOUT IT, NO WIRELESS (ETC.), PERIOD. THIS ISN'T LOOKING GOOD SO FAR.

    5 TIPS IN THE SITE WEB/FORUMS TO INSTALL "HP WIRELESS ASSISTANT" IN THE LIST OF AVAILABLE/SUPPORTED DRIVERS, BUT IT DIDN'T THERE HAS NO "HP WIRELESS ASSISTANT" IN THE LIST TO DOWNLOAD. AND TO DOWNLOAD IT DIRECTLY TO THE PAGE OF THE WIZARD ITSELF YOU MUST HAVE THE COMPUTER OPERATED BY CONNECTED DIRECTLY ONLINE TO INSTALL, YET THE COMPUTER ITSELF CANNOT CONNECT ONLINE IN THE FIRST PLACE, WHICH IS A MAJOR CONTRADICTION AND IRONY IF YOU ASK ME... «TO CONNECT ONLINE TO REPAIR US DIRECTLY SO THAT YOUR COMPUTER CAN APPLY ONLINE...» ». HUH?

    QUESTION: SOMEONE HAS A FOOLPROOF METHOD, THEY KNOW OF A WIRELESS ON A NEW INSTALL OF WINDOWS 7 ON THIS MODEL/S?

    MAYBE THE SITES THAT HAVE BETTER BACKUPS FIX HOTKEY DRIVERS AND WIRELESS AS THE HP SITE ITSELF?

    THANK YOU IN ADVANCE.

    RUSSELL.

    Hi, Russell:

    He has a Ralink WiFi card you find the parts list for your laptop.

    So, this is the driver you need for this card...

    This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.

    File name: sp56942.exe

    HP wireless assistant software is not applicable to your model.  Your model uses the most recent software HP connection manager, which you may need to install in order to activate the wireless card so that the drivers can be installed.

    This package provides the connection manager HP for the notebook models and operating systems.

    File name: sp54630.exe

    The driver hotkey, you need is this one...

    This package contains the Quick Launch software HP, which allows the special function keys on the laptop to program models. For example, the software of HP Quick Launch allows users to press the Fn + ESC keys to view system information. This software works with supported operating systems.

    File name: sp56929.exe

    So that the brightness keys work, you must install the graphics driver first.

    This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

    File name: sp54988.exe

  • Are there problems with Adobe Lightroom CC when upgrading to Windows 10?

    I recently updated my computer to Windows 10. I find that the develop Module does not work as it was before I upgraded. It takes forever now to process anything. Others are experiencing the same problem? If you have, you have a solution?

    Thank you

    Gloria

    reset your preferences - https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

  • I have to manually install the driver for Aspire ZC-102, updates when I move Windows 8 to 10?

    I have to manually install the driver for Aspire ZC-102, updates when I move Windows 8 to 10?

    I was struggling with this ACER for more than a year. I have do it I have back when it was still under warranty, 14 months ago. Now I've updated free online through Microsoft for Windows 10 back in early August. I had hoped that my mess was a stack of the operating system, but unfortunately, it's still a piece. However, there is no virus. I run Malwarebytes Pro full time with it has quarantined of PUPPIES as well as McAfee Anti Virus full time. I use cCleaner to keep cut up. I NEVER garguillo or browsed porn.
    I've got max 16 GB of RAM. I have very few applications other than Office 2013.

    Even if this thing was a room at the time where it was running Windows 8 and 8.1, so I want to try to make it work on Windows 10 without having to start over with a clean install. That's why I asked about the drivers.

    your ZC-102 will not have a direct drivers updated from Acer support, which means you have to rely on Windows Update by itself the drivers or get them by yourself.

    Let me give you 3 Tips:

    1) never use Registry cleaners Windows 8.x and above all, they are no longer needed

    (2) uninstall McAfee, he kills the performance of your machine, use the antivirus windows integrated, it is good and very light

    (3) If you require loading time fast on programs, think about an SSD upgrade

  • I get an error code 10. DT High Definition Audio CODEC driver problem. Have uninstalled and re installed, still no progress. Any advice? I have

    I bought a new laptop, Dell Vostro 3550 and found pirated software. I installed Windows 7 Pro (64 bit).

    There is no sound at all. Get a code 10 message, IDT High Definition Audio CODEC has a driver problem. I uninstalled and re installed the driver without result.
    If anyone can help?

    Hello Eugene,

    When you installed Windows 7 Pro, did you do a reformat and clean install, or have you just loaded Win 7? Part of the problem may be a residual of pirated software. I recommend a reformat and clean install if you can do it now.

    In the contrary case, the thing to look at is if there is a driver conflict between what driver is there now compared to what was there. Go to control panel | Device Manager and watch the video, sound, and game controllers section. What drivers are here for audio? And which audio driver your speakers are pointed to? The active audio driver suitable for your speakers.

    If you could answer my questions, I might be able to help you further.

    Kind regards

    BearPup

  • I have problems with my Apple ID when you download applications, that it is said that your ID Apple has not yet been used in the iTunes Store

    I have problems with my Apple ID when you download applications, that it is said that your ID Apple has not yet been used in the iTunes Store

    What exactly is the problem? You are also being invited to review the account and enter payment details? If you did you are your details accepted - if they are, you should be able to remove them then.

  • Problems with clicking and scrolling when you are using the mouse in IE

    Separated from this thread.

    Original title:

    Problems with clicking and scrolling when you are using the mouse

    I have the same problem.  My touchscreen responds but my touchpad and mouse are unable to save a click in IE.  I need to reboot to rectify.  It seems to be more common when the laptop comes out of fashion 'sleep'.   I tried all the steps above, everything is up-to-date.

    Hello Fred,.

    Thanks for the reply.

    I appreciate your efforts to resolve the issue.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run the hardware and devices Troubleshooter and check. Please follow these steps:

    a. press Windows + W keys, type Troubleshooting in the search box and press on Enter.
    b. click on 'show all' and then click 'hardware and devices'.
    c. click 'Next' and then follow the on-screen instructions.

    If this does not help, then use method 2.

    Method 2:
    Start your computer in safe mode and check the number.
    Refer to this article:
    Start settings for Windows (including safe mode)
    http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Anyone who has a problem with the system crashes when importing using the new interface to import

    Anyone who has a problem with the system crashes when importing using the new interface to import

    Can specify you what Adobe program you use so that we do that your post is in the right forum?

  • Hello. I have a problem with the payment process when trying to buy the plan of creative photography of Cloud (one year). the error is: there was a problem processing your order, please contact our Service team customer care for assistance. AfricaBa North

    Hello. I have a problem with the payment process when trying to buy the plan of creative photography of Cloud (one year).

    the error is: there was a problem processing your order, please contact our Service team customer care for assistance. Middle East & North AfricaBahrain: 80081097Egypt: 08000000447Jordan/Kuwait/Lebanon/Qatar/Yemen: English + 44 207 365 0735Jordan/Kuwait/Lebanon/Qatar/Yemen: Arabic/French + 44 203 564 4145Oman: 80077173Saudi Arabia: 8008446638Tunisia, the Morocco and the Algeria: + 33 United Arab Emirates 157324642United: 80004443085Commonthwealth of independent States (CIS): + 44 207 365 0735

    Help me please to solve this problem. I need my lightroom immediately)

    Hi mohamed,.

    Please see the link below to buy the plan of photography:

    Pricing plans and creative Cloud membership | Adobe Creative Cloud

    In case you still have question, please contact sales at Adobe team.

    Adobe Middle East and North Africa

    Kind regards

    Sheena

  • I have a problem with Canon PowerShot SX 60 Hs-camera with Camera Raw, I can not open the photos taken in raw mode. How can I update Camera Raw? I also tried with Photoshop elements 13, but it was the same thing, I could not open pictures.ts 13 gross

    I have a problem with Canon PowerShot SX 60 HS-vamera wirh Camera Raw in Photoshop elements 12, cannot open raw files. I have the latest version of camera Raw plug in, what is the problem?

    It's on our radar and hoping to incorporate it in a next update.

    As soon as it is available, it will be updated in the article.

    http://helpx.Adobe.com/Creative-Suite/KB/camera-raw-plug-supported-cameras.html

    ~ David

  • Hello all: I have a problem with my Illustrator? When I export final work, the text that is does not, I can config it? I have try several times, but still cannot fix it.

    Hello all: I have a problem with my Illustrator? When I export final work, the text that is does not, I can config it? I have try several times, but still cannot fix it. inactiveforumnotifier Newsgroup_User Zoheir Illustrator

    What is the format of your final work? How are you viewing? What version of Illustrator do you use?

    Here are some common reasons why your type might be missing - is your type completely on the artboard and bleed?

    Is your type on a layer that is set up to print not? Is your white type and position it to overprint?

  • Having a problem with the Muse crashing when opening a Web site I designed in Muse.

    Having a problem with the Muse crashing when opening a Web site I designed in Muse. You need to be able to access this site in order to update for my clients.

    [LASP/updateCaches] TypeError: Error #1009: cannot access a property or method of a null object reference.

    All adventures Rafting | Wenatchee Whitewater Rafting trips - two hours East of Seattle

    Could you please send us the .muse file to [email protected] as well as a link to this topic? If the file is larger than 20 MB, you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc.. Thank you.

  • Problems with UAC, Sims 3 downloader and original windows

    Problems with UAC, Sims 3 downloader and original windows

    I have windows Vista and have been using it for a while to play the sims 3 and download games via original EA downloader/store.  I had run a windows update and an original updated in the last days and therefore my sims 3 expansion packs ceased to operate.  I uninstalled all and have reinstalled the original game of the downloader of origin and now when I try to download my expansion packs I get an error message saying that windows has prevented the application creates a download directory, please accept the UAC prompt to start to download this game.  I approved the promt and they have same message came still high and so I disabled UAC altogether and still got the same error message, I looked on the EA forums and the only line I can find of them our it may be a windows problem (which I doubt)?  Can you help me?

    Hello

    Method 1:
    Right click on all of the files and select run as administrator and try to install it.

    Method 2:

    You can try creating a new user account.
    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

    Note: select the Administration option while creating a user account

    Method 3:

    You try to run the system restore at the same time that it worked very well.
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

    I hope this helps. Get back to us with results

Maybe you are looking for