Driver Realtek 8103e does not work under Vista (DV4T), ethernet does not work

Similar Questions

• Driver Realtek audio has stopped working on my Satellite A100

  The Realtek audio driver I downloaded from this site for WinXp (V R 1.54) stopped working after an intervention apparently of another driver. The failure of any attempt to uninstall. This is a very stubborn driver and can t be eliminated completely from the computer. WinXp pro doesn't have a sound for this computer (Sat 100-787) driver and I can't reinstall the same driver. Yellow (i) continues to show in the Device Manager.

  What can we do about this and is there a better driver for my computer?

  As already mentioned in your thread at the beginning, you need to install the Microsoft service pack 2!
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=102308#102308

  After installing SP2, you must upgrade the XP to the last State! Use the MS Update site! Very important are the fixes KB888111 and KB835221!

  After the updated operating system you must install the latest audio driver from the Web to Realtek site, or from the Toshiba site!
  Please note that you must also update the BIOS to the XP version if you use XP on this laptop Vista.

  A note: the A100-787 belongs to the series PSAANE; Choose the right drivers!

• Satellite A500 PSAM3A - how to get the HARD market under Vista 64-bit disk Protection System

  Hello

  I would like to know how to get the HARD drive Protection system up and running under Vista Home Premium 64 bit operating system. I downloaded the program 64 bit of Toshiba for this program and install it I tried but doesn't seem to work. I have uninstalled and try to install the program, but still does not work.

  Unable to find the problem, why it won't work. If anyone knows how to solve this problem it would be a great
  help for me. If anyone knows how to solve this problem please answer me as soon as possible.

  Thank you for your time.

  Kind regards
  Nigel.

  Hello!

  What you downloaded exactly on the Toshiba site?

  As written Akuma you must install first added value Package you will find also on the Toshiba site. Check this box!

  An interesting thing: it does not work if you are using the preinstalled operating system? It should have everything installed for your laptop.

  Good bye

• Realtek AC97 Audio Driver works on my map its microsoft? (under vista and need some sort of broad legalization of real-time system)

  Vista and the need for a kind of wide equalization system in real time for audio... and this driver seems to provide what I need... but will it work on my microsoft Driver card hd audio?  If it is not possible, then what program could I use for an equalizer?

  Hello

  What is the model number of your sound card?

  The drivers are specific to a device.  RealTek drivers don't work for its Microsoft Map, you must install the correct driver for your device package works very well.

  For more information about the driver, see the links below

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

   

  Equalizer you can see link below, also look on the internet for software that can help you in this task.

  Change bass, stereo, and other audio effects in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-bass-stereo-and-other-audio-effects-in-Windows-Media-Player

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Built an MSI that does not work under Vista but works under XP

  We have built a MSI file that does not work under Vista but works under XP. No errors occur in the installation.  Running the installation "as Administrator".  But the application does not start without errors.

  You'd better choose to post your question in the developer forum. You can try the MSDN forums below, but you should definitely provide more details when you do.

  MSDN forums - http://social.msdn.microsoft.com/Forums/en-US/categories MS - MVP - Elephant Boy computers - don't panic!

• I have lightroom 4 works under vista, I bought lightroom 5 upgrade, but it does not load can help you?

  I have lightroom 4 works under vista, I bought lightroom 5 upgrade, but it does not load, can you please help?

  Hi J H. Williams

  LR 5 is not supported on Windows Vista...

  Please check the link for the minimum system requirements below: http://www.adobe.com/products/photoshop-lightroom/tech-specs.html

• Help! HP Toolbox does not work under Vista

  When nearly two years ago, I added a Vista PC to my network, I found that the HP Toolbox software - necessary to monitor the level of status and toner for my LaserJet 1320 - wouldn't install or run under Vista.  I contacted HP and they told me "us working on this and should have a new version available soon.  I regularly, come back and still would get a similar response.  Now that I replaced my last XP machine with a Vista computer, I'm more in need of this utility than ever.  I sent HP Technical Support and I was told ' sorry, pal, but you're out of luck.  The 1320 is no longer a current model so can't stand us it anymore. ' (With a strong commitment to customer support, I'm surprised they even bother to release the drivers!)

  Does anyone have a fix for this problem?

  After reading some other forums, I found that when you print a Test page through printer menu options, the page displays the ink levels.

• I wrote a program using windows visual with windows 95 that does not run the 300 in vist compatibility dll file, how can I make it work under vista

  I need instructions for details on how to get this written self program for working under vista

  responsible to: * address email is removed from the privacy *

  I call this Whatday program, it is a calendar program

  Hello

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.
   
  http://social.msdn.Microsoft.com/forums/en-us/categories/  
  

• Driver Chicony webcam does not work on the Satellite A200-13O

  After the misfortune that occurred to my webcam, I tried to fix it by uninstalling the driver and then put it back in place (by the toshiba Web site).
  I did this twice and it does not work,
  allthought the pc installed the driver, the camera was not working because a file was for win95 and my pc has vista.

  After several reboots, I made the following
  -Start
  -all programs
  -camera assistant software
  -Right click
  -options (the last button in the right click menu...)
  -compatibility
  -Select work in win95 compatibility
  -ok
  Sorry for my English, I am Greek and my menu vista also... :))
  If anyone wants more details please to contact me.
  I hope this could help those in despair...

  Hello

  Yes I would like some details;).

  For example: manufacturer who is the camera, it is built, made, he has worked previously, and so on...

  So there is a lot to say, have you ever said to the second part, but I'm missing a few things as I've described above. By the way: you can try to recover your machine, if you really need on your camera, but it is really the LAST RESORT.

  Good bye
  John

• Gamepad not working do not under Vista

  My Windows Vista loaded and runs MS Combat Flight Simulator V1 OK using the keyboard, in 'settings' program, he recognizes the joystick for calibration but joystick doesn't work just not in the game itself. I tried this fix below - but no luck. Any other ideas please?

  If you upgrade to Windows Vista, one of the things that you may find is that your older programs works under Vista. Many software publishers are working to release Vista compatible versions, but in the meantime, you can try running in Compatibility Mode applications.

  To do:

  1. open Windows Explorer.
  2. Locate the executable file of the application.
  3. right click on the executable, and then click the properties option.
  4. Select the Compatibility tab.
  5. Select run this program in Compatibility Mode option.
  6. in the drop-down list, choose the operating system that you ran before upgrading to Vista.
  7. If necessary, select run the program as administrator.
  8. click on OK.

  Hello

   
   
  What is the brand and model of the gamepad?
   
   
  I suggest the following steps and check for the device.
  a. click the Start button.
  b. click Control Panel, open game controllers.
  c. click on your game controller, and then click Properties.
  d. on the Test tab, test the game controller to verify functionality.
  If this does not help, you can follow the steps in this article mentioned below:
  http://support.Microsoft.com/kb/831361
  (Valid also for all Microsoft games)
   
   
  See also:
  The problems of gamepad:
  http://support.Microsoft.com/kb/811463

• Vista, how can I know when service pack 1 is fully downloaded, I have service pack 2 on the drive, but it does not load until service pack 1 is fully downloaded.

  Vista, how can I know when service pack 1 is fully downloaded, I have service pack 2 on the drive, but it does not load until service pack 1 is fully downloaded.

  I manual installation, it currently seems to be so many downloads, I might switch to automatic installation but I don't want to start the download service Pack2 because it could take forever and I have it on disk.
  Please notify
  Graham

  Hi Graham,

  Thanks for the reply and happy to know that the problem has been resolved.

  If you have problems with Windows in the future, please do not hesitate to post in the Microsoft Community Forums and we will be happy to help you.

• Canon MP Navigator stopped working with scanner. Worked under Vista, not Win 7.

  Scanner Canon Lide 200 worked very well under Vista 64.  I've updated on Win 7 64 and the software interface has stopped working - "MP Navigator EX has stopped working".  That's a BEX error module fault MSONSEXT. DLL_unloaded.  I uninstalled, downloaded the newest and reinstalled, same problem.  Canon had me create a new profile, the program works in this profile.  Canon has written it's rights or licensing of the OS.

  The scanner works with other software.  MP Navigator is a resident program for making copies or copy and email, etc..

  Here are the details of the windows error

  Problem event name: BEX
  Application name: mpnex20.exe
  Application version: 2.0.3.0
  Application timestamp: 488d25b8
  Fault Module name: MSONSEXT. DLL_unloaded
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 43306199
  Exception offset: 49143a3b
  Exception code: c0000005
  Exception data: 00000008
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1033
  Additional information 1: 0f31
  More information 2: 0f3137665bbf0bb676c8a16f3fa76e52
  Additional information 3: fff8
  Additional information 4: fff84cbc2f915b8472e90c61e476efef

  I had the same problem with Win 7 64. I talked to Support Canon technique and after an hour in which we tested several things, I was told the problem was with Windows and I need to contact Microsoft. I tried to create a new profile that has fixed the problem for about a week, then he came back again! The question may be associated with Windows Update, but I'm not sure. On this last go I created a new profile and then copied to the folders and files from the corrupted profile one at a time to see when the problem would be to start over. After carefully copy of files, save, test Mp Navigator, and if necessary to restore the last good configuration I discovered that the following file was the cause of the problem:

  C:\Users\\App Data\Roaming\Microsoft\Windows\Network Shortcuts\My Web Sites on MSN

  Note: This file was not present in my new profile. In addition, the icon has the shortcut on that marker, but explore announces that it is a folder. There is no file extension.

  I then copied ALL the other bad profile data to the new and MP Navigator still worked! I then deleted the file in question from the wrong profile and MP Navigator started working there too!

  I then reconfigured all my software and IE etc for the first time by looking at the network shortcuts folder. The file in question has not yet reappeared. I made a shortcut to this place, I can keep an eye on it to see when it appears again.

  I hope someone at CANON or Microsoft will fix this issue of profile "corrupt."

  Sincerely,

  David Witteried

• Hi people, I try to install Lightroom 6 on my pc with Windows 7/64-bit, but the installation occurs an error message indicating that installation of this product under 'Vista' is not possible - but I'm on Windows 7, does anyone can solve this problem

  Hi people, I try to install Lightroom 6 on my pc with Windows 7/64-bit, but the installation occurs an error message indicating that installation of this product under 'Vista' is not possible - but I'm on Windows 7, does anyone can solve this problem?

  Hello

  Please see try to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

  Hope that helps!

  Kind regards

  Sheena

• I get error no hard drive detected, so I put in a new hard drive. It does not work. What can I do?

  Windows XP Home Edition on a HP Pavilion zv5405us notebook PC

  Without a cd operation, he begins by saying-

  Intel UNDI, PXE - 2.0 (build 082)

  Copyright...

  For Realtek RTL8139 (X) /8130/ 810 X PCI Fast ethernet controller v2.13 (020326)

  PXE - E61: Media test page, check the cable

  PXE - MOF: Exit PXE ROM.

  And when I boot from the CD of the operating system it is to the point where I choose to install or repair.

  So, if I click on one of those who he says...

  Setup did not find hard drives installed on your computer.

  Setup cannot continue.

  I tried replacing the hard drive, but it was always the same thing, so I put the old one back in.

  I need to find a way to fix it.

  Can anyone help?

  Assuming that your laptop was manufactured after 2003, you can try the HP drive diagnostic tool, but it seems that if you have a more serious hardware problem: cable/connector from the hard drive is faulty or the on the motherboard disk controller has failed.

  You can see also solve the Start Up and No Boot problems checklist but that probably tells you nothing that you have not already tried.

  See also Overview of how the problems when a computer is not Boot or Start Up properly

• I don't see the entire hard drive under Vista. When I try to shrink a volume, I seem to lose space.

  Original title: I see all the hard drive under Vista

  I see on the C drive properties
  "space used = 143 GB ', and"
  "494GB of free space.   But, when I try to do a third partition to install windows 7, using the disk management tool, after I click on
  shrink the volume on drive c, I don't see that: ' available shrink space: 79, 917 MB ' and I also see 'total size after shrink in MB = 573891'.  I expect all the free space 494 GB available shrink.  I'm wrong.    Why all the 494GBs are not available to reduce or at least half of it, I guess that instead of only available to shrink 79Gs!
  In addition, currently, I have three partitions.  For vista, office and other programs and data, C D like Factory Image of HP, a 11.3 GB and yesterday I made a partition for windows 7 with 48.83GBs and installed windows 7 Professional there.  Then I realize, I need more space to install office and other programs and data.  This is when I tried to shrink the c drive and encountered this problem.
  Can you please help me
  Thank you

  Hello

  you do not shrink the C: drive and then expand the E: drive back in the space that you did

  You cannot extend a drive backward

  and I gave you a link to read and use on the problems of shrinkage

  If as a result of the information on how vista disk management work does not fit what you want to do, you may need to buy 3rd party partition software