Driver Realtek audio has stopped working on my Satellite A100
The Realtek audio driver I downloaded from this site for WinXp (V R 1.54) stopped working after an intervention apparently of another driver. The failure of any attempt to uninstall. This is a very stubborn driver and can t be eliminated completely from the computer. WinXp pro doesn't have a sound for this computer (Sat 100-787) driver and I can't reinstall the same driver. Yellow (i) continues to show in the Device Manager.
What can we do about this and is there a better driver for my computer?
As already mentioned in your thread at the beginning, you need to install the Microsoft service pack 2!
After installing SP2, you must upgrade the XP to the last State! Use the MS Update site! Very important are the fixes KB888111 and KB835221!
After the updated operating system you must install the latest audio driver from the Web to Realtek site, or from the Toshiba site!
Please note that you must also update the BIOS to the XP version if you use XP on this laptop Vista.
A note: the A100-787 belongs to the series PSAANE; Choose the right drivers!
I bought my dell studio with webcam 2010. Not long after that I bought the audio has stopped working. What is so frustrating, is that there is no troubleshooting feature...
Why dell webcam is not a feature of troubleshooting? Is is just a piece of garbage that is thrown in to make believe that you get something of value? the audio has stopped working shortly after I bought it and there is nothing that I found to try to recover
1. are you able to hear the system sounds?
2 are you facing any problem with Dell webcam?
3. What is the number of the model of the computer?
Run the hardware and devices Troubleshooter and check if that helps:
Hardware devices do not work or are not detected in Windows
To resolve the problem with the sound, I suggest to refer to article and follow these steps:
If the problem is not resolved, please respond with more details.
HelloI have a WD external drive. I bought it 2-3 years ago and it works perfectly until a few months ago. My computer is using Windows Vista. The problem is that, although the external drive is detected when I open a pop up window appears indicating that Windows Explorer has stopped working. Then the window closes. I tried to update the software, I have uninstalled and installed back but the same problem still exists.Anyone know what I can do?Thanks in advance
Check the drive on another computer, if the problem is the same, try using another cable or hard drive case. If this is not the case, see the link below, if it helps:
The Explorer has stopped working Vista error
Can someone help me with this and also tell me about.
Everytime I turn on my laptop I get notification message "Configfree has stopped working"... "try to get the solution on the internet... "and I don't know what is the problem and how to fix it.
I have Toshiba Satellite L850-13R, i7, using Windows 7 Starter.
Can someone tell me what is this error and how to fix it? and, also, my laptop is very slow since I got these notifications. I scanned and there are no threats found...
Thank you in advance...
I m not very well why the Utility of Toshiba ConfigFree has stopped working, but I can tell you how you can solve this problem.
I think simple installation ConfigFree could solve this annoying problem.
How the product?
First download easy all the utility driver page ConfigFree Toshiba UE
Please pay attention to the version. There is a ConfigFree utility for 32-bit system and 64-bit.
After the ConfigFree utility has been downloaded, uninstall the previous software installed.
In Control Panel-> programs & features, you should find the ConfigFree
After the tool has been uninstalled, restart the laptop
Then unizip the package downloaded and start the installation.
Reboot once more.
... That's all :)
I have a Satellite P105-S9722 and everything seems fine except the occasional extreme overheating it stops. In any case, my blutooth has stopped working.
Here's what I've done so far:
1 formatted, reinstalled clean (running the toshiba Vista business upgrade)
2 tried to use the most recent bluetooth Vista drivers fron this site & Blutooth monitor 3 w / stack windows
I tried several times without success. Here's what's happening.
When I install toshiba stack, it is all the way to the grip and "install bluetooth driver". I get an error message on a USB device unknown who breaks down and will not be installed. It is under the TouchChip Fingerprint coprocessor. In addition, with the Bluetooth Monitor 3 installed, has no "BLUETOOTH" category in ther CP to set properties
That's all. It hags just here and bogs of the bridge I have to restart the system.
Thanks in advance!
If the laptop is overheated, you must remove the dust from the radiator. You can use a can of compressed air to blow off the dust.
Have you tried to use the battery Microsoft Bluetooth standard instead? To use it, you must uninstall the Toshiba Bluetooth stack, then just install the Bluetooth screen
Full text message * task status bar Menu ConfigFree has stopped working *.
Whenever the modem USB (key Huawei E352 HSPA USB) connects this error. Running Win7 Ultimate 32 bit.
Google search: some believe it is a virus, others believe that it is a matter of hardware/software.
How should I do? Any ideas?
It is not easy to help you because you use external third party material. I put t think ConfigFree is tested as intensely with all sorts of external devices.
Why this may be just speculation. Still is it that ConfigFree is not necessary to run then I recommend to leave ConfigFree before starting to use your modem. How to fix? Good question. What you can do about it? Not much. Perhaps to find new version ConfigFree and reinstall in the hope, it will be OK. In my view, no more than that.
I use ConfigFree constantly with LAN and WLAN networks, and there is no problem at all.
I have a Satellite A200/H01 with Vista Home Premium 32 bit.
A few days ago I started up this message at startup: "TosBtMng has stopped working" I have updated all the BT device drivers in Device Manager, but it did not help. I then installed the battery BlueTooth (v64000T_20090324_x32.exe), and this did not help, either. In fact, the error "TosBtMng has stopped working" message kept coming upward on several occasions, even when I tried to shut it down.
Could someone help me please?
I use BT to sync with my mobile phone (Nokia 6120 Classic) via PC Suite from Nokia 22.214.171.124 worm. I was using the computer BT without problem for 18 months now, until last week.
Thank you very much. Andrew
Try the new Bluetooth stack v6.40.02
My Webcam has stopped working so I uninstalled and reinstalled the app and its still does not.
What should I do?
Any help would be great! Thanks :) x
Occur when you
What model of laptop do you have?
What operating system do you use?
Webcam application will start automatically with Windows OS?
What happens when you click on the Photo/Video button?
I've had the laptop for jusy 7 weeks and the fan has stopped working. It always seemed that he ran too to what looks like at full speed almost constantly, but now its stopped.
I just tried to call the helpline and ended up leaving a message to be recalled. They work on Sunday?
How long they tend to take to fix these things?
I put t know 100% if they work on Sunday, but I presume that they don t
However, can you please tell what camera do you use?
I can t believe that if fans stopped working then the laptop should automatically stops or the CPU overheats! It is very dangerous because the laptop and the motherboard may cause damage.
So if the fans don't turn you should not turn on the laptop.
But maybe the cooling modules run only with the lower speed?
This is not unusual. The BIOS and the energy-saving control the speed of the CPU and cooling modes. Fans should not run with maximum efficiency if the temperature does not increase.
What is a remote desktop device redirector bus? First of all, I have a laptop. Second, after you turn off the equipment my audio stopped working in services. This hardware driver is Microsoft. My concern is why my audio hardware requires remote redirection as that on behalf of disabled bus? On further investigation, Dell has a bus Director. Not a bus "redirector".
Thanks for posting your question in the Microsoft Community. We are happy to help you.
To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:
1. why you have disabled hardware?
2 do you have remote sessions enabled on the computer, or you are using Remote Desktop Services for any purpose?
3. when exactly you receive the error message?
Please respond to this answer we will be happy to help you.
I cut and pasted and then a few important files from my laptop on an external hard drive. Since the external hard drive stopped working. Is it possible to find the files that have been moved?
(More info: I tried to recover the files from external hard disk but it requires a physical recovery and would cost over $ 1000, which I did not; also unfortunately I don't think I created backup via the "backup and Restore Center" files in the control panel).
It depends on how long you have moved the files, and how the computer has been used since.
If you have Vista Business, Ultimate or enterprise, you can use the previous versions.
Try these programs:
- Free: http://www.filehippo.com/download_recuva/
- $99, but the free trial version to see if it works before paying: http://services.seagate.com/eStore/Seagate-File-Recovery-for-Windows-P32C1.aspx
My computer (vostro 1510) began to revolt recently and I wonder if you could help me with this.
Basically, last week I was talking to my friend on Skype when suddenly my computer restarted due to the update of Windows (I have Windows Vista Business 32-bit). After he turned his back, I realized that there is no audio from the speakers. I tried using headphones but still - no sound.
Immediately, I went to the 'Sounds' menu and checked if my speakers were still 'active '. They have been.
Next thing I decided to do was to reinstall the Realtek audio driver, however, did not help or the other. Since then, I tried to reinstall several times but, unfortunately, everything remained the same.
Then, I thought that maybe something was wrong with my hardware, however, audio spent ALL Dell diagnostics audio tests (so my hardware is very good, yes?). I also tried "System Restore" option and returned to the point before the update... Nothing has changed!
In addition, as far as I know, all the audio settings in Windows (checked in Registry Editor) are OK.
What should I do now? My last hope is to completely reinstall the system, however, I decided to contact you first.
Thanks in advance!
Solved the problem by reinstalling the operating system.
I recently installed Cativate 7. My Audio was very well originally, but has suddenly stopped working in new and old projects. The speaker in the time line is active. Any suggestions?
Check your publication settings in preferences > project > publication settings. There is a check box there that determines whether or not the audio is included when published. It could be set to OFF.
Earlier today the DVD player worked but stopped suddenly, on my Satellite L755D.
Looks like he is reading the disc, but can't find anything. It is not the real disk as it works on another computer.
Have you tested the feature with drives different (original CD, DVD)?
the microphone of my Satellite Pro T130 15F stopped working a couple of days at a time.
It captures the white noise.
But he responds only to knock on the place where it is located next to the built-in webcam. It does not pick up normal voice or cry out to him...
Can't bring any changes to the software that could influence.
What I've done so far: deleted drivers, installed new, updated all Toshiba Software and downloaded and run all the stuff suggested to this problem.
And of course, it is not set to mute or upgraded to the bottom.
Still no cure.
Thanks much adavance.
Hmmm, it makes a static noise? Kinda sounds like hardware related issue
But check the microphone settings in the control panel-> sound-> recording tab
Here, you should see two entries; internal microphone and external microphone port.
The internal microphone must be turned on!
In addition, the internal mic belongs to the webcam. In the assistant webcam-> settings-> audio tab, you can increase the maximum microphone volume.
Check this box
Maybe you are looking for
Sorry for my poor English, but here is my problem.When I open a new tab, I want to see a WHITE page. Yes, just empty with nothing on it. But even if I put a topic: default blank page - new tab opens with the overview pages nine as in opera. So here's
The search widget Twitter suddenly stopped working on a site I maintain. It appears correctly in IE8 +, Chrome, and Safari. In addition, the preview box that normally appears on the right side of this page is not displayed: https://twitter.com/about/
Since my upgrade to OSX (OSX v 10.10) Yosemite RIM Album Art Deamon chrashes. When I start first it takes about 2-3 minutes before the first crash, then when I dismiss the crash report, it is only a few seconds until the following appears. BBDM has b
Original title: icon of Windows Task Manager I have a corrupt "windows task manager" icon in my taskbar, I mean when I run the Task Manager, I get a corrupted, icon I tried to delete the icon cache and it did not work... screenshot
Hi allI just install 12 c on my Oracle Linux box and I am able to connect locally to the database, as intended. Now, what would be the first step to connect to my external database from another computer on the network. By example, if the database ser