driver Realtek lan problem

Hello Sir

Recently replaced the hard drive in my laptop, forcing me to re-install Windows 7 Ultimate edition. The laptop is a HP pavilion n011tu 15

Installation went well, now trying to download the drivers for the network card on another computer and install it via a USB on the laptop. I get error messages when I try to do, I think I have the right software to install, but I'm not sure. First message that popsup is an error saying "Findfile failed. I press OK - then after a few moments, I get the message "realtek network controller is not found. If hibernation is enabled, please connect the cable. »

I tried to resolve, but can not fix. Please Sir do little help...

.

Hello:

Sometimes it must first install the first Intel chipset driver and restart the computer before the installation of the ethernet driver.

One should always first install the chipset driver and restart the computer before installing any other driver to avoid things like this happen.

http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127793-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

Then try to install the ethernet driver.

http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127816-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

Tags: Notebooks

Similar Questions

  • Satellite Pro L500 - cannot install the Realtek LAN driver

    Hi all

    I got a Satellite Pro L500 Windows 7 pro with disk created from computers, cell phones, but now cannot install a Realtek LAN driver for the laptop.

    The installation of the driver software program doesn't seem to work properly all the time, tried several times to install with only once a realtek 'repair' option becomes available.
    When I managed to install the driver I got an error "the device couldn't start. After restoring I also had problems with a "controller driver simple communication PCL.
    which seems to have been an Intel MEI according to the SAT, DEV info displayed in the information systems.

    If these problems are linked and how to install the driver required in an automated system if the system does not correctly detects hardware?

    Hello

    I m not owner of the Satellite Pro L500 but have you ever tried to install the latest driver Realtek LAN official site of Toshiba?

    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    Check this box!

  • Realtek LAN and synaptics touchpad driver for hp pavilion g6-2237us

    Hi guys

    I tried to install the apps, but I can't. hp support assistant warned me that significant action was required and the opening to check on the action, I discovered that the synaptics touchpad and the network local realtek failed to install. they were on the sections of the failing elements and I their redownloaded then through even hp support assistant. the process went well and then stopped on the installation section. both applications are now displayed in the actions of conpleted and didn't stock boxes. How can I successfully install these programs? Help, please.

    Thank you

    have a guy great day.

    @BALDAGEI,

    Thanks for posting.

    It is possible that there is a problem with the wizard for help where, you may not be able to install the drivers using the program. I would like to troubleshoot the software itself by following the ideas of SuperMario1 in this thread: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/HP-Support-Assistant-Window...

    Also, you can try to install the touchpad and the Realtek driver yourself:

    -To install tuchpad driver, download and run the following: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-118377-1&cc=ca&dlc=en&lc=en&os=4158&product=5318955&sw_lang=

    -To install the Realtek LAN driver, download and run the following: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110514-1&cc=ca&dlc=en&lc=en&os=4158&product=5318955&sw_lang=

  • Realtek Lan driver for Win 7 causes BSOD x120e

    I installed my SSD and 8G of ram and did a fresh install of W7 x 64.

    I am connected to my network via ethernet and installed the thinkvantage system update software.  I selected all packages apply less Power manager.  Installation failed when you try to install the realtek drivers.  I got a BSOD that says Pagefault in nonpaged area.  The fault has stressed the pci.sys driver.  or hal.dll.  He repeated twice.

    I opened thinkvantage again and you have not selected the driver realtek for download and updates installed without problem.  This computer had been running previously without ANY problems what-so-ever.  Any suggestions?

    Or you can follow the suggestion of clique in http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/x120e-bluescreen-when-installing-lan-drivers/td... and install the drivers own Realtek.

  • 15 - r018dx: Wireless card driver (Realtek RTL188EE 802.11 bgn) 'Crash '.

    I had the ongoing problem of losing internet connection randomly. When I fix the problem, it is said:

    • Adapter Wi - Fi adapter Realtek RTL188EE 802.11 bgn knows driver - or hardware problems
    • A network cable is not plugged in correctly or may be broken

    Usually implacable restart possibly help but sometimes I find myself without internet connection for hours. Help, please!

    Hello

    Looled like you upgraded your Windows 8.1 machine to Windows 10, but you have not applied again pilot. Please download and install the following RTL8723BE/RTL8188EE of Realtek 802.11b/g/n Wireless LAN Drivers for Windows 10:

    http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72517.exe

    Kind regards.

  • Realtek LAN

    HP Pavilion g6-1163sa

    Windows 7 64-bit SP1

    I have a problem with the Ethernet LAN cable. At startup, it constantly does a dance of connent - not connected - connect - not connected which may be continuous or may result in a connection or a situation to give up!

    Sometimes the network card is displayed in network connections, sometimes not. Similarly in the Device Manager where he alternated between saying:

    The device is not connected to the computer (Code45) or the device is functioning properly.

    I installed the latest driver 7.69.304.2013 Realtek who Windows assures me is the last available.

    I also suffer a BSOD 2 or 3 per day of pci.sys and wonder if the two things are related.

    Any help gratefully received. I'm trying to set up a wireless network, but the router first needs an Ethernet connection... Hum Ho!

    Thank you

    John

    Uninstall the card in the Device Manager. Don't let Windows not install a driver.

    Start the Recovery Manager and install the driver.

    Use the touch pad and put a tickm in the box to the left of the realtek lan driver and then click on install in the lower right corner.

    Best regards

    ERICO

  • Realtek Lan error Code 10, new Bios Update

    Hi guys,.

    so I have this problem, in which case I can't use my LAN on my PC, it started after I installed a new BIOS chip with the last update included.

    I get error Code 10 for the Realtek LAN "the device cannot start", I tried to install almost every Realtek driver that is compatible with the ethernet controller and family controller (Realtek PCIe GBE Family Controller).

    None of the pilots are able to install on my PC, windows keeps saying that they are not successful; is there something I can do?

    Thank you very much

    Luke

    Luke, have you tried this troubleshooting of windows?

    FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

    http://support.Microsoft.com/kb/943104

  • G 430 W Lan problem

    I have Lenovo 3000 G430 laptop, I used Windows 7 32-bit before, but now I upgraded to 64-bit, now the problem is that my Lan & Bluetooth drivers are not getting recognized despite them installed from the support page.

    It says "W Lan Switch located in front is turned off" but it is powered, it still doesn't give any light! It is for sure that it is not a hardware problem with the switch, but a driver s/w problem.

    And every time I have install the bluetooth driver, it says "Device not found"

    What should do? I can connect to the Wi Fi Net now!

    Hi, I got the answer finally. The drivers worked very well. I just downloaded the driver HOTKEY & on the F5 key. Now it works!

  • No output hdmi for hpe 580t Windows 7 64 bit. Audio driver: Realtek 6.0.1.6196; Date: 9/7/2010

    Windows 7 64-bit. Audio driver: Realtek 6.0.1.6196; Date: 9/7/2010

    There is no realtek hdmi output in his choice.

    In its Panel:

    Speakers

    Headset

    Realtek Digital Output

    Pls help

    Hello detroithp, you could try going to this link and see if the information is what you need.

    This seems to be a common problem. The link shows the solution to this problem is for Vista,

    but it should be the same for Windows 7.

  • How can I correct an error of the driver realtek ethernet for windows vista?

    I had my hard drive fail so I went and bought a new and put it in. but when I reset everything I couldn't all internet and I get an error that says something about a fail driver realtek ethernet or something like that. HELP PLZ!

    Hello

    ·         What is the brand and model of your computer?

    ·         What hard drive was causing the problem?

    I would l recommend you follow the steps in troubleshooting section and check if it helps:

    Network adapter problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

    You can also contact technical support for Realtek and check the availability of drivers for Windows Vista.

    http://www.Realtek.com/contact/

  • Need Driver Wireless Lan for Satellite C670D-126 for widows 7-64 bit

    Need Driver Wireless Lan for Satellite C670D-126 for Widows 7-64 bit PSC4AE
    I can't download the file driver Lan Wireless page

    Thank you

    The Satellite C670D-126 laptop supports Atheros AR9285 802.11bgn / Bluetooth combo card.

    You can download the driver here:
    http://www.MyToshiba.com.au/file/Download/Resource/File/19301/tc00384500f.exe

  • driver realtek RT8139/810 x Fast ethernet for HP CQ58-d57SR adapter

    Take the new HP compaq CQ58-d57SR. Search help driver realtek RT8139/810 x Fast ethernet for Win7 32 adapter?

    After installation position rezult pilot will be negativ. Run Auto search on internet, win7 see adapter ok

  • Error message: CD-ROM DRIVER has a PROBLEM when inserting disk on the new laptop.

    Original title: CD-ROM DRIVE

    tried my new laptop by inserting a disc in the CD-ROM drive and the message... CD-ROM DRIVER has a PROBLEM, I clicked on fix of the problem and still nothing.what can do to solve this problem? This is a brand new laptop

    Hi kempie2011,

    1. What is the number of brand and model of the laptop?

    2. you receive error codes?

    I suggest you try the fix it from the link given below and check if it helps.

    Your CD or DVD drive cannot read or write media

    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    Also read the following article:

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

    http://support.Microsoft.com/kb/929461

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Error "the network card experiences driver or hardware problems" and "To ensure that your Internet protocol bindings are Correct" on Dell Inspiron 530

    Original title: 'make sure that your Internet protocol bindings are Correct (DELL Inspiron 530 Intel 82562V and Desltop)

    I'm doing tech support for the family and I'm stumped. They had a Dell 530 with an Intel 82562V-2 and is no longer connected to the internet.

    ipconfig/all statements

    Hostname...: wayne-PC
    Suffix main DNS...:
    Node... type: hybrid
    Active... IP routing: No.
    Active... proxy WINS: No.

    That's all. Windows gives errors two errors:

    (1) the card network knows of driver or hardware problems

    (2) check that your Internet Protocol connections are Correct

    I installed the latest Intel drivers and TCP IP settings are checked for V4 and V6. I even went as far to install a new Dynex Ethernet card that gets the same mistakes.

    I even tried the netsh reset ip and netsh winsock reset command. I have no idea what to do next. I searched glasses and found similar problems with the same model of Dell and card, but they have been fixed by rebooting.

    Hi MButIer,

    -How long have you had this problem?
    -Was any change in software because the computer before the show?

    Follow the steps mentioned below:

    Step 1:

    Temporarily disable the antivirus software (and any other security software) and the firewall on the computer as a test. Once disabled check if you can connect to the internet without any error.

    If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

    Note: Make sure that you enable the antivirus software, other security and firewall programs.

    Warning

    Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Step 2:

     

    Perform a System Restore to a point before the show and check if this solves the problem.

    See also:

    System Restore: frequently asked questions

    If the steps above do not help, the best would be to get in touch with the Internet Service Provider (ISP) for assistance.

    Hope this information helps.

    Gokul - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • [Solved] HL-DT-ST DVDRAM GT20L periph. CdRom SATA has a driver problem. The driver faces a problem of Plug-and-Play device.

    Recently, I noticed that my CD/DVD stopped working. He turns, but nothing happens; the disc is not read.
    I use Windows 7 Home Premium 64 - bit on an HP Touchsmart tx2z.

    I ran the Microsoft FixIt program through http://support.microsoft.com/kb/982116 and it has identified the following problem: 'HL-DT-ST DVDRAM GT20L periph. CdRom SATA has a driver problem. The driver faces a problem of Plug-and-Play device. »

    However, FixIt said that he was unable to solve the problem and discs are still read.

    I manually uninstalled the driver in Device Manager and then scanned for the hardware changes. The driver was reinstalled, but with the same problems as before.

    Any ideas?

    Thank you!

    Also, try following the steps for Windows Vista, which should also work in Windows 7, in the MS KB article:

    http://support.Microsoft.com/kb/982116

    These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

    Create a System Restore Point beforehand and restart the computer later.

Maybe you are looking for