Driver selection

Similar Questions

• There is no driver selected for the item or a set of device information

  There is no driver selected for the item or a set of device information

  Error message when I try to update the mouse driver or video driver. Windows 7

  Hello

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you can not update the driver. Please let me know if this isn't the problem that you are experiencing.

  I understand the inconvenience caused to you. I will help you solve the problem.

  Before troubleshooting, I have little information about the issue.

  1. When exactly do you get this error?
  2. Did you of recent changes to the computer before this problem?

  Try installing the driver in compatibility mode. Here are the steps how to install drivers in compatibility mode.

  (a) place the driver on the OfficeSetup file.

  (b) make a right click the driver installation file and select Properties or compatibility tab select the appropriate options in entries to the displayed image.

  (c) click apply, and then click OK.

  (d) right click on the file and select run as administrator to install.

  I also recommend that you contact the manufacturer of the hardware device, and you learn about the support of future drivers for Windows 7.

  If the problem persists, post your reply with results and questions above. We are happy to help you further in the advanced troubleshooting steps!

  It will be useful.

• Long boot time and the gel boot drive selection window

  Hello. I have a problem with my MacBook Pro 13 retina "(2015 at the beginning).

  My mac is about 4 minutes of cranking up about a quarter of the time and it is not related to the problem of the "boot disk select parameters. The computer just hangs before it's anything related to the start-up procedure. It's just a black screen with no interaction with the mouse, no noise and no keyboard input. It does not recognize the 'option key ' (used to get into the disk boot selector) until I pressed it for several minutes, and then the boot drive selector freezes as well.

  I don't have any external drives connected, and already tried SMC reset, reset the PRAM and reinstalling the operating system (normal wipe and wipe any partition).

  I always have Apple Care left. Help, please. Thank you.

  Hi Herojeff02:

  It seems that you have some SSD problems.

  Have you tried to boot safe mode. Try safe mode if your Mac does not commissioning - Apple Support

  You can start in recovery mode by pressing command + R and then using disk utility to check your SSD.

  See the following links: OS X: on OS X Recovery - Apple Support

  Resolve startup issues and perform maintenance on disk with disk utility and fsck - Apple Support

  If you have Apple Care, I'd do an appointment at the Genius Bar. It could also be a hardware problem.

• Configurator error 'the hard size in the first string of RAID must be smaller than the drive selected in the second Raid channel'

  Hello, I hope this is the forum for this question rigth.

  I am trying to set up a new T330 for one of our customers, and I want to use a Raid 1 + Raid 1 configuration. First raid for the operating system and daily backups, second raid for a database.

  I tried the C15c configuration, but I always get the error "the size of the hard drive in the first RAID channel must be smaller than the selected hard drive in the second Raid channel".

  Is it really necessary to buy an SSD that is bigger than the HD used in the first Raid? The DSS may be relatively low, but I need more space for the backup.

  Is there an alternative solution to this?

  Thanks in advance,

  Stefan

  Yes. In fact, you can mix drive types on the SAME channel... they just cannot be mixed in the same virtual disk (table).

• There is no driver selected for the device or element.___E0000203__ information set

  BEHRINGER BCD2000 B-CONTROL DEEJAY EROR 28

  Hello

  ·         When you receive the error code 28?

  The websites of the manufacturers of these devices, explains that they are not supported with Windows 7.

  http://www.BEHRINGER.com/en/products/BCD2000.aspx

  http://www.BEHRINGER.com/en/products/BCD3000.aspx

  However, try to install the drivers in compatibility mode. Here are the steps how to install drivers in compatibility mode.

  a. place the driver on the desktop installation file.

  b. right click on the driver installation file and select Properties/Compatibility tab select the appropriate options in entries to the next image.

  c. click apply/OK.

  d. right click on the file and select run as administrator to install.

  I also recommend that you contact the manufacturer of the hardware device, and you learn about the support of future drivers for Windows 7.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Clone of the drive selected only--ignore the independent record

  I have a virtual machine with two drives.  the first disk contains the operating system and is a standard virtual disk.  The second disc is independent - persistent.  I want hot Clone ONLY the OS disk and ignore the independent drive.  I have a Powershell script that will clone a virtual machine, but I need to know how to jump the independent drive.

  It seems that it is possible to copy a vmdk selected a virtual computer on the ground, but I need to be able to make a clone of hot.  Is this possible via Powershell?

  Here is the code for the loop. Replace # DO comment on the line and everything up to the # clean comment by the following

  ## DO IT -- NOTE that CopyVirtualDisk_Task is 'experimental' as of vSphere 4.0 GA        $taskMoRef = $vdiskMgr.CopyVirtualDisk_Task($sourceDS, $sourceDC, $destDS, $destDC, $destSpec, $force)
          $task = Get-View $taskMoRef        $info = get-task | where {$_.id -like "*-"+$task.info.key}
          while ($task.Info.State -eq "running" -or $task.Info.State -eq "queued") {
              sleep 10            $info = get-task | where {$_.id -like "*-"+$task.info.key}
              $task = Get-View $taskMoRef            Write-Host "Task" $task.info.state "," $info.percentcomplete "% complete."        }
      }
  }
  

• 14-r017tx HP: HP 14-r017tx Wireless LAN Driver Selection

  Dear all,

  There are several drivers for Wireless LAN Driver for HP 14-r017tx, i.e. Broadcom, Intel, Mediatek.

  How can I know the equipment of wireless LAN in my laptop?

  So I can choose the right driver fot, example: if I know the material of WLAN in my laptop is Broadcomm, then I will install the Broadcom driver.

  Thank you.

  Kind Regads,

  Damaspra

  @Damaspra

  This should help.

  http://www.WikiHow.com/find-hardware-ID

  REO

• Spin down drives selectively

  I have three drives on my machine Windows 8 Pro. How can I turn down only those who are inactive. I used to be able to do this in Windows XP, but now it doesn't seem to be a way to turn one down while others are still active.

  Are you sure? Antivirus programs also do from time to time...

  But if she still doesn't not idling, you can use resource monitor to check the access files and player...

• Some of the windows home CD files are necessary .___Please home edition insert windows CD-ROM into the drive selected below, and press okay.___E:\i386

  I need the file i386 install languages for Japanese and other oriental languages on my computer. I do not have the disk and I don't know where to download them from the site. It says browse and I know that there is a file i386 on my computer but I don't know which one to choose.

  I want to only download the East Asain languages for Japanese and etc. Thank you for your time

  Hi Alpha_Q,

  You are able to install? I386 files are also saved in your pc under C:\WINDOWS\ServicePackFiles\ServicePackCache

• The poor Internet behavior Device Manager error "' there is no selected for the item or a set of device driver information."

  Original title: poor Internet behavior.

  I bought a laptop Lenovo X100e used with Windows 7 Professional. It was a great computer, but when I go on the internet, it behaves as if the connection is slow or wobbly, even if the connection is fast. This is especially true of the streaming video, who stutters so much, it is virtually impossible to watch Netflix or YouTube or any other video streaming service. It is also a great computer so I really want to solve this problem, rather than buying another computer.

  I used this laptop on my network domestic WiFi so much and a direct connection with the same behavior. I diagnosed my network speed and its good, usually around 20Mps, again I tried this laptop in public places like Whole Foods, and it has the same: wobbly connection. I have an old Dell Latitude that works and it works great on the same network internet and I used my phone on my wifi at home and it works fine, so it's clearly the Lenovo.

  The network cards are 11 b/g/n Wireless LAN Mini-PCI Express Adapter II and Realtek GBE Family Controller christophepaille. I checked the drivers for the two (using Device Manager), and they are both currently. I used the function "diagnose problems" and found nothing. I googled for problems with them and have not found much.

  There is also a Qualcom Gobi 2000 listed (it's a WAN wireless driver for Windows 7) under other devices and he says "there is no driver selected for the item or a set of device information. I tried updating the driver, but got an error message saying "Cannot find Windows driver." software for your device I have no idea if this is relevant.

  In addition, the laptop plays the video without any problem if it is a file on the local drive, such as mp4, so I don't think that the video problem is in itself. It is the general communication with a network. Again, I don't think it's a problem of wifi because I get the same behavior, even if I plug a cable network directly to my router.

  Also, I tried several browsers updated, including Chrome, Firefox and IE. In addition, I ran several antivirus scans, and nothing is found.

  Any help would be greatly appreciated.

  (1) run chkdsk as follows:

  A prompt by right clicking and select "Run as Administrator"
  and then at the command prompt, type: chkdsk /f r, then press the Enter key.

  If you are asked to plan the volume to check the next time that the system/PC reboots,
  Enter: y

  Now, restart the PC.

  If you know the manufacturing of your hard drive you can also download their diagnostic software.

  Another use: SpeedFan has an online health analysis function
  (SMART tab) for hard drives. It will show how your disks
  compared with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php
  Note: Unfortunately now includes a lot of bloat-ware, be very careful when installing remove bloat-ware.

  =====================================================================

  2) run the SFC/scannow command. This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  (or "Safe Mode" open a command prompt)
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  =================================================================

  If SFC Scannow could not repair any or all the corrupt system files
  follow these steps:

  (a) open a command prompt (start / all programs / accessories)
  Right click on the command line option, then select: run as administrator

  (b) at the command prompt, enter: DISM.exe/online/Cleanup-Image /ScanHealth

  Press the ENTER"" key.

  (c) then enter: DISM.exe/online/Cleanup-Image /RestoreHealth

  Press the ENTER"" key.

  (d) now rerun the command SFC/SCANNOW...

  At the command prompt, enter: SFC/scannow

  J W Stuart: http://www.pagestart.com

• How to password protect a flash drive?

  How can I protect a flash drive with a password?

  Make sure that the USB is formatted for Mac OS extended first.  You should be able to right click on the drive, select the option to encrypt it, and then enter your administrator password when prompted for it.

• HP 250 g4: driver Win 7 for: hp 250 g4

  Hello

  I'm trying to downgrade my notebook to win 10 to Win 7 64 bit.

  I was able to manage Wifi & Lan. But I have trouble with:

  -DPTF peripheral frame

  -PCI - Ver-/ Entschlusselungscontroler

  -Unknown device (unbekanntes Gerät)

  I downloaded the driver fom the HP taken website. Whitch driver should I install to fix it.

  Please let me know if you need further information.

  THX

  BR

  Tom

  PIC

  You are the very welcome.

  If you can not get the hotfix to work, I compressed upwards and tied the driver below.

  See if my TPM 2.0 driver works on your model.

  Install you it according to the same manual method, as you did for the dynamic thermal conductor.

  Download and uncompress the file that I attached to his record.  Don't do anything with the files in the folder.

  Click on the unknown device requiring the driver, click on the driver tab, click on put up-to-date driver, select her browse my computer for driver software option, navigate to the driver folder, that you have unzipped, make sure the include subfolders is selected and see if the driver will install.

• P200-rt7 but Win XP Setup cannot find hard drive

  Hi, try to install xp on my Toshiba p200-rt7 and xp says it cannot find my hard drive. If I launch the install of vista dvd he finds it so I think I need to hit F6 during the xp installation and select "third-party drivers? If Yes, where can I get these drivers? If anyone can help?

  Thank you
  B

  Installing a version commercial (street copy) of Windows XP on a Toshiba Vista laptop.
  ----------------------------------------------------------------------------------

  Step 1: Prepare the BIOS
  -Go to section Support/Drivers on the Toshiba site and look for your model of Toshiba
  -If your phone has a separate version of BIOS for XP and Vista, download the BIOS XP and run it in Windows.
  -If you cannot start Windows, you can update the BIOS after installing XP.

  Step 2: Enable SATA Compatibility Mode in the BIOS
  -If installing XP cannot detect SATA drive, enable SATA Compatibility Mode in BIOS if this option is available and install XP.

  Step 3: Install XP using a floppy with the SATA drivers
  -If SATA compatibility mode is not available, you must use the SATA drivers diskette during installation of XP. Follow these steps:

  (1) Download driver Windows XP SATA F6 on the site of Toshiba Support/downloads.
  If a single SATA/AHCI F6 driver is unavailable, download and extract the Intel Matrix Storage Manager driver for XP in a temporary folder.
  The Intel Matrix Storage Manager driver package must contain some files under the folder "F6flpy". For example: C:\temp\Intel Matrix Storage Manager\F6flpy\ICH8M_32bit
  Choose the right folder. For example: ICH8M_32bit for a Chipset of Intel ICH8 during installation of Windows XP 32-bit.

  (2) copy these files (iastor.inf, etc.) on a blank diskette. The files must reside in the root directory of the floppy disk.
  For example: A:\iastor.inf, A:\iaahci.inf, etc...

  (3) connect a Toshiba USB floppy drive to the Toshiba laptop. (some non - Toshiba USB Floppy Drives may not work correctly during the installation of XP)

  (4) (4) demarrer start from the Windows XP CD, start the installation and make sure that your floppy with the drivers is inserted into the floppy USB drive.

  (5) for the XP installation invites you to press F6 to install a storage driver, immediately press F6.

  (6) for installing XP you invites to select a SATA driver, select the appropriate driver and continue.
  For example: ICH7M Intel(r) 82801GBM SATA AHCI Controller, Intel(r) ICH8M 82801HEM/HBM SATA AHCI Controller

  (7) keep the attached floppy drive and floppy disk inserted XP has not completed its installation.
  Do not partition or format the hard drive during the installation of XP. The diskette SATA drivers are copied and stored on the hard drive during the installation of XP.

• TECRA R850 - not found wireless network controller driver

  Hello

  I reinstalled my computer, since then it does not recognize a wireless or network device
  here - after part of the result of the Toshiba Diagnostics tool
  Device Manager indicates that:
  "The drivers for this device are not installed. (Code 28)
  There is no driver selected for the item or a set of device information.
  To find a driver for this device, click Update driver.
  "

  However I can't find the driver, after update of Windows updates, etc.

  Help, please!

  Thank you
  lavver

  Date of 2013/03/15 22:55:35

  [Information on PC]
  Model name TECRA R850
  Part number PT524E-005014BT
  Serial number 4B021792H
  Version of the OS Microsoft Windows 7 Professional 6.1.7600
  Version of the BIOS Version 3.60
  CPU Intel Core i5 - 2410M 2.30 GHz CPU
  Memory8192MB physical RAM
  Hard drive Capacity304, 562, 036, 736 [bytes] 283.646 [GB]
  Hard drive space free Capacity126, 578, 688, 000 [bytes] 117.886 [GB]
  Video version Intel(r) HD Graphics Family = 8.15.10.2291
  Resolution1366 x 768 Pixels screen
  Color quality, true color (32 bit)
  Audio version of Realtek High Definition Audio = 6.0.1.6271
  Display Audio Intel (r) version = 6.14.0.3074
  Network version Intel Gigabit Network Connection = 12.2.45.0 82579V = E8:9 D MAC address: 87:EA:3 C: 21
  HUAWEI Mobile Connect - 3G version of the network card = 6, 0, 1, 279 MAC address = 00:1E:10:1F:82:A7
  Modem HUAWEI Mobile Connect - 3 G Modem version = 2.0.6.706
  Internet Explorer9.0.8112.16421
  IDE Device Hitachi HTS723232A7A364
  CARPET * A DVD-RAM UJ8A2AS = 1.00 FW version

  [Diagnostics results]
  CPU TEST DOES PASS
  MEMORY TEST DID PASS
  Enhanced Host Controller - 1C2D)
  Enhanced Host Controller - 1 26)

  i.LINK TEST IS NOT FOUND

  Your Tecra a card ATHEROS 802.11 (B/G/N) WB195-HMC w / BT WLAN inside and all the latest drivers you can find on the Toshiba WLAN portal - http://aps2.toshiba-tro.de/wlan/

  Check it out please.

  This is card with BT, then before you install install driver WLAN BT filter. You can find it on the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

• TOSHIBA 500 GB external HARD drive

  Hello

  Please I need help...

  My system is not able to recognize all available on my hard drive capacity.

  What should I do to use the hard drive full?

  500 GB is the ability, now its GB full but only 256 and the rest I can't fill, I get a message 'not enough of free space.

  Thanks in advance for you're help!

  Luka

  That's the problem with the file system of your external hard drive,
  Check your external hard drive file system.
  -Open my computer
  -Right-click on your external hard drive
  -Select Properties
  -written to see if it is the file system FAT32 or below this (FAT or FAT16)
  you will need to format it in NTFS. Why? I'll explain later.
  -to format your external hard drive, right click on the external hard drive.
  -Select format
  -in the file system drop-down menu, select NTFS
  -Choose the quick format
  -Press OK

  After the process is finished, you can now copy the file.

  EXPLANATION:
  This happens because the FAT family of file system have the 4 GB limit only (if I'm not mistaken) in the 1 file size.
  NTFS have much higher than that, but I forgot how big it can manage 1 file. ^. ^
  but it will be far from 8 GB.