Driver software HP Photosmart c4780 installed on windows 7

Similar Questions

• Driver software Deskjet f4180 not install on windows 8.1

  Hello! I bought a computer hp laptop spectrum x 2 and tried to connect my old deskjet f4180 all-in-one printer. The computer recognizes the printer, but says that the drivers are not installed. I tried to install the drivers of hp:

  Hello Tmontonen

  You can download on this site https://www.sendspace.com/and just copy and paste the link to the file to your message.

  If you don't want the message to be seen by anyone, you can just PM me the link, and I'll look into it.

• We get an error "Device driver software has not been installed successfully" when installing Microsoft LifeCam HD-3000

  * Original title: does not always

  There is a windows 8 there, but I'm trying to download it right now and a red Tin can that appear when it comes to the end and when I click on continue anyway, it restarts just install it?

  Just at the moment where I thought that he had finally worked as he said completing the installation to have fun and enjoy, when I click on finish, that's what I get on my screen "device driver software was not properly installed" the with next to "Microsoft LifeCam HD-3000", he says has failed. ". The LifeCam shortcut on my desktop now will not open.

  Hi Rachel,

  Thank you for your response.

  I suggest you to contact the Microsoft Hardware support for assistance on this issue.

  http://www.Microsoft.com/hardware/en-CA/support/contact-us

  It will be useful.

• How can I recover my data from my hard drive? or continue to install my windows 8 with no loss of data?

  I have deleted (formatted) my windows 8.1:

  Disk 0 Partition 1: Recovery, and

  Disk 0 Partition 2

  A single disk rest "Drive.
  I tried to install my windows 8 8.1, now I'm stuck with a Dell Inspiron that cannot load it is current windows and I can't afford to format because it locates all my data.

  Please help with possible recovery options, that I may have? The last thing I tried was buy an enclosure and place my 500 GB HD inside, how ever I saw the first two aforementioned HD

  Help, please

  Hi, I found the solution, I had to plug my hard drive in a case then:

  1. restart the machine with Windows 8.1
  2. determine the parition of "EFI system" with the disk management utility
  3. Run as administrator command prompt
  4. typediskpart
  5. type select disk 0 then select partition 2 thenassign
  6. He will appear in my computer that he did as a player

• External drives, USB, USB Flash Drives, "driver software device is not installed. Problem Acer and Windows 7

  Not sure one I'm more frustrated with.  Acer or Microsoft

  Try to get decent customer service out either seems so difficult.

  OK, it's a pretty common problem.  I've seen this around other forums and each finger to Microsoft points.

  Flash USB, Jump Drives thumb drives, Memory Sticks, players, whatever they are called, they do not work on my Acer laptop.  Everything works still perfectly on my Vista PC and my work XP.  So they are not damaged.  Also an external Freecom USB 1 TB drive.  Does not work on Windows 7.

  I have an Acer 5338 (less than one year) which unfortunately as as a manufacturer OEM for Microsoft Windows are not interested in help to say that there is problem Acer.  ACERS site does not even recognize the existence of the cell phone model I which makes contact them for a solution physically impossible (everyone has a phone number or e-mail address >).  In any case, they had a free upgrade to Win 7.  (Oh you can't imagine how much I care that I didn't...).

  So I've updated.  And all USB memory devices do not work all of a sudden.

  All of them try to load drivers then give up with the error message.

  Just to get the usual answers to the road!

  • I tested the USB ports.  All work.
  • I uninstalled all the USB ports and let the Win 7 to reinstall. No problem
  • I deleted the file that records discs.
  • I made a new clean install.  Nothing has changed.
  • Cannot switch the chipset drivers.  Won't let me, says I don't need them
  • Each drive is displayed during the startup screen.
  • Each drive appears in Device Manager but the poster as a fault.
  • Updated installed, removed, re-installed all the drivers on the planet.
  • Tried the solution of "regedit" suggested elsewhere, temptation of power my laptop, lucky I system restored to the top.
  • Does not appear in disk management, so cannot deal with any drive letter conflict.
  • Have no viruses.
  • Have one firewall installed.
  • Prayed
  • Touched the thing of reversal
  • Pleaded
  • Pretended to cry.  Not interested.

  So, I'm hoping against hope that someone has a solution to this problem.  I have a vague idea that it might be something to do with the "ports" and the port settings.  I'm afraid is a closed book to me, so please, geniuses everywhere, please help!  Give me something new to try!

  Or a way to talk to a human being at Acer!

  Hi davec07510,
   
  We use Windows 7 and have not encountered this problem on computers. This issue is occurring on your computer may be due to the driver or hardware that does not support Windows 7.
   
  The compatible chipset driver installation Windows 7 can help.
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• MDR-ZX750BN - device driver software was not successfully installed

  Here my problem, I go to my bluetooth to add a device I turn my headset on "MDR-ZX750BN" it detects and so I add it starts to install the device drivers but then and I encounter the message "device driver software was installed correctly. Now, I tried to man to try and fix this problem, so I hope someone here can help know me fix the. I think it has something to do with the drivers not being do not or are not planned to install the good. I just need to know how to fix it. I'll be very grateful to anyone who can help me with this problem. Thank you.

  Hello Eric,

  Thanks for posting your query on Microsoft Community forum.

  When you connect a new device to your computer, Windows tries to install it for you automatically, and will notify you if a driver for the device is not found. There are several things you can try if this happens:

  I suggest you try the steps in the following article.

  What to do when a device is not installed correctly

  Get back to us with the result of the steps so that we can help you further.

  Kind regards.

• Driver HP PSC 1317 wont install on windows 7 - please help

  Hi, I really hope that someone will be able to help me solve this problem. I tried for more than a week to try to install the drivers for this printer and nothing has worked!

  I am running windows 7 (64-bit).  I downloaded the driver from the HP website, I tried to install, uninstall, reinstall, I tried all the troubleshooting options (disable the start up programs, firewall, remove temporary files, etc.).  I tried to use windows update, which fails to install updates for the driver as well.  I tried windows update troubleshooting, HP print and scan doctor and everything else that I found online.  but nothing has worked.

  I tried to install the driver from the hp website and it installs everything other than the driver, if I try to install just the driver fails, I get the error message 'Fatal error' no code error with it and there is a check mark next to any other than the driver, which has a red x next to it.

  When windows update tries to install the printer when I connect the usb port of the printer to the computer it finds the driver, try installing and then only comes up with "unable to install the driver"

  another message, that I had on the numerous attempts to install is 'error 0x000003eb', but none of these options of troubleshooting the problem.

  Please someone is able to help me solve this problem?  its driving me crazy!  I just want to be able to print documents, im not bothered about scanning or something else

  Thank you

  Jodie

  Unplug the printer, run Disk Cleanup, uninstall any software of HP printer via programs & features, restart the PC

  Download/save the full software features of HP, then run the Setup and follow the instructions

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=374584#n187

  If you see then the error msg 'error 0x000003eb.

  Then refer to this http://social.technet.microsoft.com/Forums/windows/en-US/86cc6755-e245-46d7-9fb9-5f7d8f1b74a1/cannot-install-printers

• No driver available for Photosmart c4780

  I try to use my old Photosmart C4780 with my MacbookPro, and when I try to add the printer it says "the software for this printer is currently unavailable. Please contact the printer manufacturer for the latest version of the software. »

  Can anyone help?

  lcp11,

  I'm sorry that you have a problem with the software. I would like to go to the site below, the software for your printer.  I would be totally uninstall and reinstall the software downloaded from the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & dlc = in & lc = in & product = 3794615 & task = &

  I hope this helps

• K015dx m6 ENVY: envy m6 k015dx - no hard drive detected on a clean install of windows 10

  Hello, after upgrading fromwindows 8 to 10, windows starts not more and I can 't repair.

  the only option is to reinstall windows 10 (new installation).

  The problem now is that windows 10 does not see the hard drive, I'm trying to install the driver of intel rst but not at all, the hard drive and partition are not seen. I have successfully test the hard disk with bios diagnostic.

  No idea on how to solve this problem is welcome?

  Thank you in advance

  I have me there final put another hard drive and it is detected by all the different operating system installer.
  It seems that Windows corrupted 10 hd, I use a usb adapter TO connect the old one on another computer, hard drive was visible, but not initialized. I m not the only one having this problem, I received a call from someone Salinger for help.
  Thank you for your support

• Photosmart C4580 installed on Windows 7 Ultimate and it won't work!

  Software installed on Windows 7 Ultimate and I can do everything except printing! When I ask for an example, I see a blank page and the printer does not print. All downloaded from the HP site and I'm tired of installing the update (CPE_SLP_NETWORKMSI_hpcom_000_006) because I don't think it's the solution because I tried several times and now I installed a version of Windows for the fourth time and I won't do it again. Can someone please help?

  With the help of HP customer care, I solved the problem! Problem is that the new installation of Microsoft was not correct. I never formatted the disk before the installation of new, and that was the problem. Thanks for the support!

• Need driver for HP Photosmart 100 work with Windows 7 64 bit

  Anyone know where you can get a printer driver for the HP Photosmart 100 printer? II'm under 64-bit Windows 7 and can't find a driver anywhere. I have the original disc, but it shows be good only as far as Windows XP (Service Pack 3). Any help would be appreciated.

  JDRomine

  Hi @JDRomine,

  By your post, I see that you need drivers for your Photosmart 100 printer. I can help you.

  I checked online, and unfortunately there is no driver available for Windows 7.

  But you could install a generic driver that should work.

  On the computer, go to start, devices and printers, select Add a printer.

  Follow the steps, select HP and Deskjet 9800, Deskjet 450 or the Deskjet 990, from the list. (even if you have a photosmart)

  Have a great day!
  Thank you.

• Try to install USB hub, error: device driver software was not successfully installed. Please consult the manufacturer of your device to help get this device installed.

  Software device driver has not been installed successfully. Please consult the manufacturer of your device to help get this device installed.

  Failed. Generic USB hub.  I went to the Device Manager and clicked on update, but it did not work. Can you help me.

  original title: DEVICE DRIVER has NOT been INSTALLED successfully.

  Go to your computer manufacturer's support web site and search for the Windows Vista drivers for your specific model number.

  If there are drivers Windows Vista, then to download to a folder on your hard drive and install all of them, in starting with the card mother/chipset drivers SATA, LAN, Audio, USB, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 / Vista drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• Software LifeCam does not install on windows 7

  I used the same webcam for some time without problem.  It's a lifecam Vx-5000.  I used windows 7 ultimate and everything on the camera worked fine.  I've updated to windows 10 and of course it wouldn't work until I updated the drivers.  What I did.  I discovered that my network card is not a windows 10 driver and it crashed my computer with a DPC_Watchdog_violation time to time.   So, after trying and not figure out how to stop the BSOD I returned to windows 7 as Windows 10 allows you to do.  Once I have with retroactive effect to the windows 7 however.  I find that my camera is not working.  The microphone records as a device for audio input and functions normally.  However if I try to turn on the camera Skype answers over almost immediately.  Whenever I try to install the Lifecam software, I get the error of KB953691.  I tried all methods of fixing the issue is offered when the error code is sought without success.  I even tried to uninstall Lifecam, but I gives me the error that the installation package is not valid for the product, when I try to look for the MSI file, I can't find it anywhere.

  Hello

  Please keep us updated.

  Please see article and advice in it.

  Troubleshoot failures to find the new LifeCam hardware

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

  I hope this helps.

• HP EliteBook 2760p: security for the Client software HP will not install on Windows 10 Version 1511

  I got the HP Client Security software installed and running under microsoft Windows 10. It will install is no longer under Windows Version 1511 10.

  - Or nearby - 17 November Microsoft has released an update to Windows 10 Version 1511.
  The Windows Update process necessary to uninstall the security software for the HP customer as it has been marked as incompatible.

  Before you uninstall, I've upgraded to version VERSION: 8.3.16.2035 (SP72998.exe). The installation under this version of Windows 10 properly filled.

  I have re-directed the Windows Update process and it beating Pavilion HP Client Security Software as incompatible and need it be uninstalled before the update of Windows 10 Version 1511.

  I uninstalled the HP Client Security software, upgrade to Windows 10 Version 1511. When reinstalling SP72998.exe, after you open a powershell window, the installation fails with the message "error 1722" There is a problem with this Windows Installer Package... Action PinShortcut.9EA0... "Location: c:\users\"username removed"\AppData\local\...\DPClientCOnsole.exe.

  A quick capture of window powershell before she disappears reveals a similar error: 'verb Pin to taskbar not found. "

  It seems that something in the Setup program tries to pin to the taskbar is a failure. A quick google search seems to indicate that the interface script to pin has been removed in Windows 10.

  I tried to install the update with Windows 8 compatibility, run as administrator, clean boot Windows. The same error each time.

  An installer updated that works with Windows 10 Version 1511 or a workaround would be greatly appreciated so I can regain the use of software security tools for the HP customer as a login by fingerprint reader.

  Workaround in this post worked perfectly with Windows Version 1511 10 and HP Client Security Software VERSION: 8.3.16.2035 (SP72998.exe).

• Device driver software was not successfully installed

  When I connect my Ipad 'News' I got this error message... Apple Mobile Device USB Driver & not properly installed CD-ROM drive.  What will I do?

  Hello

  1. what operating system is installed on your system?

  2. have there been recent changes to the system before the show?

  Method 1:

  Follow the link below, run the hardware and peripheral troubleshooting tool and then try to install the drivers.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Follow the link below and install the drivers in clean boot mode. Check if it helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the boot, follow step 7 in the link to your computer in normal mode.

  Method 3:

  Follow the link and install the latest drivers. Check if it helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Let us know if it helps.