Driver VGA geforce 310M for Win 7 ultimate 32 bit (VPCCW21FX)
I just install windows 7 Ultimate 32 bit on my laptop (Sony Vaio VPCCW-21FX). But I can't find driver VGA (geforce 310M).
Can you help me?
Try the driver from the Nvidia website. It could work because you are not using the custom Sony OS. Otherwise, you will need to find a driver for a Sony notebook which has this GPU and Windows 7 32 - bit that's not likely. Because the laptop is equipped with a 64 bit OS, it's what you should have gotten, that Sony does not have 32-bit Windows 7 drivers for this model because it is not shipped with Windows 7 32 bit.
Tags: Sony Computers
Similar Questions
-
15 - ay050nm: two drivers for WIN 7 Ultimate, 64-bit
Hi, I need two drivers for HP 15 - ay050nm, WIN 7 Ultimate, 64-bit:
(1) PCI encryption/decryption controller
PCI\VEN_8086 & DEV_2298 & SUBSYS_81F1103C & REV_35
PCI\VEN_8086 & DEV_2298 & SUBSYS_81F1103C
PCI\VEN_8086 & DEV_2298 & CC_108000
PCI\VEN_8086 & DEV_2298 & CC_1080
(2) unknown device
ACPI\MSFT0101
* MSFT0101
Thanks in advance,
Ivan
Hello
Please make sure that you create a system on the laptop restore point and backup all data.
http://support.HP.com/us-en/document/c03327545
Please download the below link drivers
http://support.HP.com/SI-en/drivers/selfservice/HP-15-notebook-PC-series/10862300/model/12319391
Kind regards
-
Not to install the drivers for HP PSC 1410 on computer running Win 7 Ultimate (64 bit)
Hi all!
I have been with my HP PSC 1410 with my old computer for a while now, without any problems. However, since the time I upgraded my computer and the operating system (Win 7 Ultimate (64 bit) recently, I find that, although the printer prints my documents and scan them in a certain measure, there is always an exclamation point icon that appears on the device, indicating that it does not work as it is supposed to. I tried to download driver from the HP site files, but the problem won't go away. Any suggestions, anyone?
Have you installed the printer according to the instructions from HP, which is to install using the cd of HP, or the full software from HP support features and only connect the printer when prompted, or just connect?
-
HP Pavilion P7 missing SM Bus Controller Driver WIN 7 Ultimate 64 Bit
I just replaced a HARD death drive in my Pavilion P7 (1246, c) and after the installation of Win 7 Ultimate 64-bit and the drivers, Device Manager indicates that the SM Bus controller has no driver installed. There is also no sound. I think that this desktop pc Chipset Intel H61. Help please!
I found the driver chipset... Intel has moved the to a different category chipset drivers. SOLVED
-
HP Laserjet 1160: Driver HP LaserJet 1160 for Win 7 Pro (x 64)
I need driver HP Laser Jet 1160 for Win 7 Pro 64-bit. This is urgent. Pls help me!
Hello
Pritner pilots are delivered through Windows Update, you do not need to install all drivers HP on your PC to install the HP Laserjet 1160.
Follow these steps to install and use your printer on Windows 7:
http://h20564.www2.HP.com/hpsc/doc/public/display?docLocale=en_US&docid=emr_na-c03470332#N10084
Shlomi
-
What is the BEST Registry Cleaner for Win 7 Ultimate or Pro 64 Bit OS version?
What is the BEST Registry Cleaner for Win 7 Ultimate or Pro 64 Bit OS version?
When I search on the internet with the same Question, I get hundreds of links and each company says it has the BEST Software Registry Cleaner to 100% and I bet that 99% are liars!
Microsoft really needs to TEST all registry cleaners & make a list of the Top 5 BEST software for many different uses and post this list for your clients may know what is the best to use to fix their PC problems.
Please, I beg you! Nice and help your customers who have purchased and use your Microsoft software... Ok??
Microsoft really needs to TEST all registry cleaners & make a list of the Top 5 BEST software for many different uses and post this list for your clients may know what is the best to use to fix their PC problems.
Microsoft does not recommend to use a registry cleaner.
Slow PC? Optimize your computer for optimal performance:
«Note: this article does not meet or recommend tinkering with the registry files.» These activities can harm your computer and should only be attempted by trained professionals. »
-
How can I access my hardrive second in windows Explorer after I have updated to Vista Home Premium (32 bit) for Windows 7 Ultimate (64 bit)?
Go to disk management and assign a drive letter to the drive.
-
Problem reinstalling Win 7 Ultimate 64 bit
I've recently updated to Win 7 Ultimate to win 10 Pro. I don't like like Win 10 and want to return to Win 7 Ultimate. However, the rollback feature Win 10 says that the files for Win7 is not found. I have inserted my official Win 7 Ultimate 64 bit OS dvd to reinstall manually, selected my C drive and started the reappattage. It stops and a message that "the/a driver required is not found." The installation cannot continue. »
I tried to install it on a secondary drive but got the same message.
I've never had this message when I have already installed and reinstalled Win 7 from this disk.
Help, please! Thank you!
I'm going to wipe my drive and try again. What is the url for Digital River, in case I need to download a copy? I have my MSoft product identification number for the disk.
I have also several external drives connected to my PC via the USB port. Would possibly be the cause of the problem?
Disconnect non-essential devices can improve the success of the installation program.
Use of Digital River to be an option available for download of real reinstall media. It no longer exists, you must use the Microsoft software download page.
-
Several crashes on Win 7 Ultimate 64 bit
I have a problem... win 7 ultimate 64-bit hangs unexpectedly and at random. at the start, normal operations, start repair, safemode etc... None of the codes of error, bsod, event logs (except the one that says windows has not been closed properly).
Win 7 Ultimate 64 bit
2 hard drives internal 1 TB
8 GB RAM (DDR3-1600)
Norton 360
MSI card mother E765
Chipset ATI
AMD Phenom II Quad core 965
On board sound driver
Impossible to run Norton Utilities to clean up, can't run Malwarebytes to scan system crashes to half or less per process. I have re-sitting all the fleas memory, cleaned and replaced CPU and CPU fan, cleaned and replaced video card. system file check-no problems. When malware and utility could not be run, no problem found. It makes me crazy. can not run the debugger - the system crashes. is there a way to slick the HARD drive and start over? It is shouting software or could virus/malwware...haven't or format HARD drive any help appreciated
Hello
You may need to try to boot an alternative operating system to perform a complete audit of malware:
Configuration/settings (BIOS/CMOS) often F2 as you start to look at the screen - the boot
for CD/DVD first and start with these to run audits of malware and the removals. Be
Be sure to set the order started back when finished.Create a Bootable CD with the Trinity Rescue Kit - free - which comes with 5 antivirus programs
Integrable Hirem is another choice - more can be found using Google.Trinity Rescue Kit - download on top right of the page
http://trinityhome.org/home/index.php?wpid=1&front_id=12CD of Hirem boot is another good choice
http://www.hirensbootcd.NET/Download.html
http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.htmlSystem Rescue CD
http://SysRescCd.org/Main_PageScan a Windows PC for viruses from a Ubuntu Live CD
http://www.howtogeek.com/HOWTO/14434/scan-a-Windows-PC-for-viruses-from-a-Ubuntu-Live-CD/Use Ubuntu Live CD to backup files from your Windows computer dead
http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer========================================================
Windows Defender in offline mode
What is Windows Defender in offline mode?
http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offlineWindows Defender Offline: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows/Windows-Defender-offline-FAQSystem requirements Windows Defender in offline mode
http://Windows.Microsoft.com/en-us/Windows/Windows-Defender-offline-system-requirementsMicrosoft support - Virus and Security Solution Center
http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Creative Sound Blaster Audigy 2 not recognized ZS running Win 7 Ultimate - 64-bit
Friends,
I have a situation where I ask for a help. It's as follows:
1. the old desktop that PC is equipped with a device for Creative Sound Blaster USB based - Audigy 2 ZS attached, it was purchased in August 2008 and since then, initially worked with Win XP (32-bit) - August 2008 to Oct 2012, then Oct. 2012 (when I upgraded the operating system to Win 7 Ultimate 64 bit) until last week when I upgraded the PC hardware.
2. However, after the upgrade, the PC does not recognize this device shows at all - a yellow exclamation mark with a label "unknown device" in Device Manager, when I connect the device to the USB port.
3. the last time (in 2012) when I upgraded the OS on the old XP PC to Win 7 hardware, the operating system recognizes the device even without installing the drivers (i.e. for Audigy 2 ZS of Creative) and he has been active (usable), as soon as I plugged the same. However, later I applied Win 7 64 bit drivers from the Creative support site. Now, even though I applied the drivers for Win 7 64 bit for the device, it is not recognized under Windows.
At the config of my old PC: Intel Core 2 Duo CPU E6540, card mother Intel graphics card Nvidia GT 220, some hard drives SATA 2 x 250 GB, 8 GB of RAM.
At the config of my new PC: Intel Core i3 (3rd generation), card mother Gigabyte, graphics card Nvidia GTX 650, SATA 1 x 1 TB hard drives & 1 x 250 GB, 8 GB of RAM.
I understand that this question, referring to the Creative device, should not fall directly under the responsibility of Microsoft, however, I looking for entries from anyone who may have any suggestions or is faced with identical situations / similar. Thanks for the patience to read this long query.
-Milind
BossDweebe,
Thanks for the suggestions. The origin of difficulties - the PC also has graphics card Nvidia GTX 650 and as part of the package of drivers for this graphics card, HD Audio driver (Nvidia) also was installing. This HD audio driver not allow Creative Audigy 2 ZS on USB to be recognized as an audio device. So I had to remove the HD from Nvidia audio driver and then install (an update) Creative driver for the device. It worked.
Thanks for your suggestions.
-Milind
-
My c700 that will may change win 7 ultimate 32 bit to 64-bit
My c700 that will may change win 7 ultimate 32 bit to 64-bit
Hi @gujju1,
Thank you for joining the HP Forums!
I understand you're wondering if your HP c700 computer can be changed to Windows 7 Ultimate 64 - bit. I am pleased to see that for you!
Yes, this computer can support 64-bit. You have to just reinstall the 64-bit version. Be sure first to backup your files .
If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.
Hope that answers your question and have a nice day!
-
Application of Beats Audio HP Envy 4-1150br for Win 7 Professional 64 bit
Hello.
I need the Application of Beats Audio HP Envy 4-1150br for Win 7 Professional 64 bit. I migrated to win 8 to Win7. With win 8 it was working perfectly. However, after migrating to Win7, there is no driver or request for Audio Beats in HP's Support page.
My Info is:
Product name: HP ENVY 4 Notebook PC
Product number: C1C41LA #AC4
Windows 7 Professional 64-bit Service Pack 1
Could you help me?
Thank you in advance.
Jose.
Hello
Please try:
http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56900.exe
and for OSD:
http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55152.exe
Kind regards.
-
We are a government agency, we bought 135 windows 7 and we have several computers 32 and 64-bit.
When we asked at the we have 135 computers mixed between 32-bit and 64-bit, told us we can choose when the product between 32-bit or 64-bit activation after installing windows 7 ultimate.
Briefly (I have a license for win 7 ultimate, can I use it as a 32-bit or 64-bit according to my pc equipment?)
so please can you help me as soon as you can.
Kind regards.We are a government agency, we bought 135 windows 7 and we have several computers 32 and 64-bit.
When we asked at the we have 135 computers mixed between 32-bit and 64-bit, told us we can choose when the product between 32-bit or 64-bit activation after installing windows 7 ultimate.> No, the machine has already architecture (32 or 64 bit) installed or not. Pairs product activation just your license to the machine.
Briefly (I have a license for win 7 ultimate, can I use it as a 32-bit or 64-bit according to my pc equipment?)
> Yes, you can.
so please can you help me as soon as you can.
Kind regards. -
Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs
I get this message when you try to run an old MS-DOS - based program in Win-7 Ultimate 64-bit.
"The version of this file is not compatible with the version of Windows you are using. Check your computer system information to see whether you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »
I understand that I am under a 64 bit OS, but is it possible to get this program to run? I was wondering if anyone has tips :)
Hi Bcopeland,
Thanks for posting your question in the Microsoft Community.
Based on the information, you are trying to install and use an old ms - dos program based in Windows-7 Ultimate 64-bit.
The problem is a software that was created for Windows 95, 98, and Windows XP has no way to work correctly with an operating system that didn't even exist when the software was written. However, the error message you get normally means that you have a 32-bit software that you are trying to install on a 64-bit system.
You can check the compatibility of the program with Windows 7, in the Compatibility Center.
If the program is not compatible, then you try to install and run the program in compatibility mode.
a. click right on the program.
b. click Properties.
c. click on the tab compatibility.
d. Select run this program in compatibility mode and select Windows Vista or whatever to use the system, the program was executed successfully.
Here is an article that gives you more information on this:
Make older programs in this version of Windows
If the problem persists, you can get in touch with the software vendor to see for the latest version of the program to use the same system of 64-bit Windows 7.
Hope the helps of information.
If you need assistance in the future to resolve any issues related to Windows, post your query and we will be happy to help you.
-
BitLocker does not not in win 7 ultimate 32 bit
I used bitlocker to lock my disks on win 7 ultimate 32 bit, it worked very well. However lately, I reinstalled win7 ultimate 32 bit and locked by bitlocker drives do not react
Hello
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/threads
Hope this information helps.
Maybe you are looking for
-
Only half of the icons showing on personal bar
Only half of the icons showing on the bookmarks toolbar, but when I go in the toolbar custom, then click on 'Done' they appeared all over again.
-
How can I make aol my site when I go online?
How can I change to have aol as my site when I go online?
-
Satellite C660 does not start on disc or USB
My Toshiba Satellite C660-DSC0QE app, BIOS version 1.80, will not start Windows more - it just goes to the dreaded black screen with white cursor. I tried a system Win 7 recovery disk, a USB with software from Kaspersky on her recovery and even a ful
-
Do not change StationGlobal.ini at run time
Hi, in my application I use global station not only to set up the Test Station. The user (developer) should have the opportunity to change these variables in edit mode, but I would like to block the file during execution for 2 main reasons: The user
-
Hi allWhen I deploy my application to start spring on weblogic server 12 c (12.1.3.0.0), the following exception is thrown.There is a class cast exception, perhaps jar duplication but in wls-cat I couldn't see my application, so I can't detect the du