Driver Windows 8 for the satellite Pro L650 - 17 p

Hello

I would like to know if there will be Windows 8 drivers in the foreseeable future.

Greetings
Zwulf

I don't think anyone here would be able to answer this question...
I read that this community is a user forum.

But I guess that the new series of portable computers should get a drivers Win 8...

Tags: Toshiba

Similar Questions

  • 2nd hard drive for the Satellite Pro A200

    Hello

    I have the Satellite pro A200 (PSAE4E-03401FDU). The LT has an option for a 2nd hard drive, but it is not included a cable.
    Someone knows the reference to the 2nd hard drive cable?
    Thank you!

    Stand by.
    When you remove the HARD drive to the second HDD can see HDD SATA conector?

  • Questions on the Satellite Pro L650-167

    Hello

    I have a few questions on the Toshiba Satellite Pro L650-167 I'm about to buy. It is the model with an i5 430 m, 4 GB drr3 and ati 5650.

    (1) will be the laptop computer motherboard supports upgrading to a processor i7m as the 620 m for example? I find these on ebay for good prices. Also can you truly open mobile phones L series to replace the processor? You can for example of dell. I know that my warranty will be cancelled. Finally all the i series cpu is all 35w so do not supply problems?

    (2) can easily exchange you the hard disk of the L series, or is it not available?

    Thank you very much!

    Here is my review for you:

    1
    Update CPU is not supported and I don t think that everyone here will be able to provide some specific information on this subject. Any laptop can be opened and removed so it shouldn't be a problem, but if it's reasonable the decision is another matter. If you need laptop with more power than pay a little more money and buy cell phone more powerful, but don t change anything and have it with full warranty time.
    http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

    2
    Generally the design on most Toshiba laptops is the same and access the HARD disk is not complicated. All you have to do is to remove the HARD drive cover placed at the bottom. Then you can remove the original HARD drive and possibly improve with a new.

  • Drivers Windows XP for the Satellite A350-110

    Hello

    I'm looking for drivers Windows XP for Toshiba Satellite A350-110. Where can I find them?

    Thank you

    If they are not on the site of Toshiba, you will then enter other similar models XP drivers.

  • Video driver for the satellite Pro A40

    I've been on the Support from Toshiba site for drivers/downloads. The graphics card is the Intel 82852/82855 GM/GME graphics card.
    Currently, the Device Manager read: version 6.14.10.4656 as of 08/01/2006 by Microsoft Corporation XDDM.

    Although I think I did the research properly, I'm not sure that this is the most recent update of the driver.
    On a note related... It would be much more effective that the Toshiba server have been set up for users to connect and get appropriate lists of updates.

    Thanks for the tips

    May I ask what you have problems?
    Are there strange problems with your laptop that are related to the graphics driver?
    Isn't it? So why a graphics driver is so important?

    In any case it s always a good idea to use the drivers provided by the site driver of Toshiba.
    If you want to use a page Intel driver then you can do this at your own risk.

    See you soon

  • No driver LAN detected on the Satellite Pro U400 and Tecra A10 Win Server 2008

    Hello

    We use in our coupany a Windows Server deployment with Windows Server 2008 boot.wim to the installation of our computers.

    I have ad driver marvell netwok our Boot.wim, but after starting the network, I have an error message because the network adapter does not work.

    We install workstations HP, VMware servers with it without problem, but we can't to install computers of latest toshia!

    We have 10 to 15 computers to install a week and we need to use this tool.

    I try to ad Intelshipset utility drivers without success.

    We have this problem with all models of just sitting Pro U400 PSU45E 10 years!

    Is there any other driver to install?
    ANYTHINK to set up?

    Best regards

    Hello

    As far as I know, Toshiba offers a few drivers are included in the recovery image and it is unclear to me that there are different drivers LAN for the specific model of laptop.
    All these drivers are available if someone wants to install a clean version of the operating system and do not want to use the factory settings.

    Have you created your own ghost image to SP U400 with all the necessary applications for the company's employees?

  • "Cooler" for the Satellite Pro L100 plate

    I recently bought a Satellite Pro L100 and would like to buy a plate cooler to go with it. After reviewing, the "Antec Notebook Cooler' looks good; but one of the comments mentions that this plate is useless for laptops with contributions on the basis (like mine).
    Can someone tell me if this is the case, or recommend an alternative?

    Hello

    In my opinion you n t need any plate cooler. If the laptop is placed correctly on the desktop and nothing interfere with good air circulation.

    Sorry, but in my opinion it's futility investment.

  • driver Windows 7 for the kodak 4000 printing station

    Is there a driver for the kodak easyshare printer dock 4000 for OS windows 7

    Hi Chris,

    Thanks for posting your query in Microsoft Community.

    I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

    As I see there is no Windows 7 drivers for Kodak dock 4000 printer. I suggest you to download the Windows Vista drivers from the following link and install in compatibility mode.

    Make older programs in this version of Windows
    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    Driver download link: http://support.en.kodak.com/app/answers/detail/a_id/16694/kw/kodak%20printer%20dock%204000/selected/true

    Thanks for posting the results and let us know if you need help to solve the problem and we will be happy to help you.

  • How to check if the 2nd HARD drive is possible on the Satellite Pro A200 PSAE7?

    Hello

    My A200/PSAE7 has a 200 GB HARD drive. For backup reasons, I would like to know - or learn to know how check - if my A200 already have the hardware support for a 2nd HARD drive, next to the slot for a 2nd HARD drive.
    In the BIOS, I see 'Toshiba MKxxx - hard drive' and 'hard drive - None '. Is the last entry in the BIOS is a sign that a 2nd HARD drive is supported and has to be put in the second location of HARD drive?

    Thanks in advance for any answer!

    Best regards
    Andreas

    You can do the following:

    Open the cover when the 2nd drive HARD so-called must be installed and check for some SATA connectors or cables. If there is an unused SATA connection so you can upgrade, if no, then you will need to backup your data on USB - HDD or whatever.

    If in the BIOS is something now, he won't say that he is physically present.

    Welcome them

  • What HARD drive can I install the Satellite Pro 2100?

    I installed a second hand Toshiba 40 GB HDD in my Pro 2100, but he fails to recognize in the BIOS. Any ideas?

    Yes, I have an idea ;)
    Have you checked if the HARD disk is not corrupted?
    I think it's a first step to find out what's wrong.

    If you are sure that the drive is 100% damage not so in my opinion him BIOS is unable to manage the size of the HARD drive. It s just too big size.
    The BIOS supports multiple disk sizes but if HARD drive it too big the BIOS may not be able to recognize the HARD drive.

  • Windows XP Home on the Satellite Pro L650 - FN keys do not work

    Hello everyone!

    I have a problem with my laptop. I have satellite L650 pro Windows XP and then install drivers and utilities hotkey. But the hotkey buttons do not work. (fn + f5 and others)
    What should you do?

    Hello

    I think that the installation of the Hotkey Utility is not enough
    As you can read in other forum threads you must also install Toshiba common Modules.

    So please check again the Web from Toshiba site and download/install the common Modules. Then retest FN keys.

    I hope it works :)

  • Need 64-bit drivers for Windows 7 for the Satellite X 200 - 21 p

    Hello everyone,

    Hope someone could help me with my query.

    Recently, I did a new install with Windows 7 64 bit and now I have problems with drivers. With the exception of the nvidia driver I downloaded on their site, I couldn't find the other drivers and not even be able to use the drivers that are on the toshiba Web site.

    My laptop is Satellite X 200 - 21 p.

    Any suggestions or direction would be appreciated! Thank you very much!

    Kind regards
    Suraj

    For me makes sense to check support at gunpoint and then decide what operating system must be installed.
    Is that your laptop model is not supported for Win7.

    For me, there are only two options:
    -try to use the stuff of Vista 64-bit
    -check if another model of laptop with similar hardware is supported Win7 and try to use these drivers.

    Sorry, but I don't see any other solution for you.

  • Cannot install windows XP on the Satellite Pro A200-1N2

    Jin

    I have a Toshiba Satellite A200 - 1N2 PSAE3E and I don't want Vista on my laptop. I downgraded the bios to V5.30 but still cannot install windows xp and there is still no optin for SATA in the bios.

    Can someone help me?

    Thank you.

    Hello

    Did you install the SATA drivers first?
    You need this driver to recognize the HARD drive!

    You must download the Intel Matrix Storage Manager. You should find it on the page of the Toshiba driver or the Intel Web site.

    You must perform the installation of an external USB FDD drive using the F6 key during the installation of Win XP.

  • Driver CD/DVD for the Satellite A100-785

    Hello. For our school, we bought 10 laptops. These PCs come with windows vista Home Basic version. We need to install windows xp sp2 on them, but the problem is that we don't have the drivers. The recovery cd theat comes with those pc is windows vista recovery CD. We tried to download the drivers on the Net and they were very good except the cd/dvd drive. With windows vista we wre able to drag and drop files to rewritable cd or dvd and it worked very well. After you install windows xp on them, we can use cd/dvd as the system writer regarded as normal CD where in fact it is a rewritable cd/dvd. We read by cd/dvd cutter, we cannot write. I don't to not install another software like nero... etc. The model of these PCs are the same:

    Toshiba satellite A100-785

    Model number: PSAANE-02M012AR

    Hello

    usually if you have an XP machine and installed a burner then this procedure should give you the ability to burn:

    http://Dallas.tamu.edu/e-learn/WinXP-CD_Burn.html

    If you really cannot burn General perhaps the service is disabled and must be re-activated:

    http://support.Microsoft.com/kb/279157

    I read something, you must check a box to activate this ability in the last lines of this article.

    Welcome them

  • Cannot repair Windows 7 on the Satellite Pro C650 18U

    Since getting my new laptop Toshiba in October, I had endless problems. It's going to be big, but I guess that relevant to the cause of the problem.

    My first problem with him has come to uninstall McAfee. I was able to do a full restore (it was new so had nothing to lose but time) and got a tool to get rid of everything that McAfee.

    All very well for a while, using AVG free antivirus. It was December before when AVG does an update that causes Windows 7 crash, usually when you sign off the coast. I was not using the machine a lot like Christmas and it seemed to work ok if I turned off, went in safe mode, normally closed then loaded windows normally. At this point, I knew not that the problem was of moy. But due to start working again, I needed to make it work properly, so I spent some time searching online (on my PC) and discovered the problem of the AVG. He had a so bad I could do nothing even in safe mode. By clicking on any AVG associated icon or file crashed the entire system. I found a fix to keep AVG running by renaming a couple of exe.bak of exe files. It worked and the computer was working normally, but I had to get removed AVG that proved impossible because I still couldn't get everything what key of AVG to do anything at all.

    I installed a free trial of an uninstall program, RevoUninstaller. It took most of the day, but finally it has deleted everything. One of the steps is to run the uninstall program of the selected program where he stopped for hours and the next step in the list of all the remaining files showed thousands of hundreds of other files and registry files, so I guess that the uninstall program does not work at all and revo removed all.

    The next day, the computer went well. I installed avast and everything was going well with one exception - the product preinstalled toshiba update program.

    The day after BSOD. I tried startup repair, you have 20 minutes to a black screen with a blinking cursor, possibly a pointer of big white mouse and nothing else. Tried safe mode, when it is run through the list of files, just to stop for a while and had no further. Dug my disk to repair windows 7, put that in, start from it, has had the same problem with the Startup Repair tool, empty large needle on a black screen.

    So what do I do next? I have the windows XP restore disk came with the laptop. I try to boot from that? If I have TO I could still do an another factory restore but I have some files on there and I'm pretty p off would be constantly having to bother with this machine.

    It was suggested to me on another forum that the problem could be with the machine, such as Windows 7 should not have these problems with the antivirus. It is still under warranty.

    Many thanks in advance.

    Hello

    Yes, you can use the Windows XP disk to install Windows XP on your laptop, but then Windows 7 is removed and t, you can use it, you can expect you reinstall Windows 7.

    Did you create the Toshiba recovery disc to install Windows 7? Using this disk, you can restore Windows 7 to factory settings. This means disk HARD will be deleted and with all the tools and pre-installed Windows 7 driver will be installed automatically.
    Just check your manual for more information.

    But the problem is if Windows doesn't boot you are not able to create this disc
    You can use the recovery disk as described here:
    http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

    If not and you want to return factory settings you can order a new disc of Windows 7 here:
    https://backupmedia.Toshiba.EU/landing.aspx

Maybe you are looking for