Driver with ATI Radeon HD 3850 AGP under Windows 7 Pro 32 bit problems

Similar Questions

• using Laserjet-Canon LBP 1120 printer on new HP ProBook 4350 s under Windows 7 Pro (64 bit).

  Hello everyone, I have a printer Canon Laserjet LBP 1120, I try to use via the new HP ProBook 4350 s under Windows 7 Pro (64 bit).  I tried the recommended troubleshooting options, nothing helps... Any suggestions?  Thanks a bunch

  All drivers/software from the Canon site, if they have win7 64 bit software and install according to Canon intstructions

• Impossible to install any program because not supported under Vista, but my PC is Windows 7 Pro 64-bit

  I try to install Rockwell Automation Studio 5000, but I get an error message saying "Studio 5000 is not supported on Windows Visa without Service Pack 1 or higher". However my PC is under Windows 7 Pro (64 bit) and Vista that is covered by the requirements of this program.

  Any ideas?

  What is the version number of Studio 5000 you have?

  You can try to install using the "compatibility mode".

  What is program compatibility?
  Program compatibility is a mode in Windows that allows you to run programs written
  for earlier versions of Windows. Most programs written for Windows Vista are also running Windows 7,
  but some older programs might run poorly or not at all.
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  Compatibility mode - make sure to run older programs in this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Windows 7 Compatibility Center
  See if your software or hardware is listed and what options you have

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Learn how to use the Mode of Windows 7 compatibility with legacy applications

  http://Lifehacker.com/5466628/learn-to-use-Windows-7s-compatibility-mode-with-older-apps

  Using Windows 7 or Vista Compatibility Mode

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  Also: http://www.sevenforums.com/tutorials/1196-internet-explorer-compatibility-view-turn-off.html

  J W Stuart: http://www.pagestart.com

• Linux driver for ATI Radeon HD 8000 M

  I bought a DELL Inspiron 15R (5521) with ATI Radeon HD 8730 M (2 GB).

  It comes preinstalled with Ubuntu 12.04LTS. I changed to Linux Mint Debian Edition 2013.

  I discovered that DELL driver for 5521 page does not offer driver linux. And also AMD does not provide linux driver HD 8000 series M. their beta version 13.4 Linux driver does not support the series 8000 M HD.

  Where can I find linux for the graphics card driver?

  You might not like the answer - there is no driver.  Switchable graphics is a Windows technology.  No doubt someone will come eventually with drivers that work with other systems operating, but nVidia and AMD support ONLY windows Vista, 7 and 8 with the graphics switching technology.

  Dell supports only Ubuntu and ONLY on systems with Intel video (NOT switching) graphics.  You SHOULD be able to use Intel video drivers on your system (check with the Publisher of the distribution), but you will NOT be able to use the AMD GPU on your system with anything other than windows.

• Driver for ATI Radeon HD 2600 XT

  Need driver for ATI Radeon HD 2600 XT
  getting error on driver

  For AMD support search
  http://support.AMD.com/us/psearch/pages/psearch.aspx?type=2.4.1&ContentType=GPU%20Download%20Detail

• Screen resolutions possible for external monitors connected to a T60 with ATI Radeon X 1300

  Hello

  at home, I have my Thinkpad T60 with ATI Radeon X 1300 graphics running in a docking station with an external monitor connected to the DVI. I plan to buy a new screen and I wonder who will take care of screen resolutions of my system. My favorite among the possible new monitors have a native resolution of 1680 x 1050 pixels. The ATI chipset will support this setting?

  A big thank you to anyone who displays some tips

  Georg

  It supports dvi up to 1920 x 1200 resolution.

• Using a HP DC7900 with Windows XP Pro 64 bit, looking for the audio driver.

  Using a HP DC7900 with Windows XP Pro 64 bit, which does not support the HP.  I found all the drivers except the audio driver.  It's a HD audio integrated with AD1884A codec.  Can someone tell me please the driver?

  HP supports evrything but XP 64 bit for this system.  I already tried the mftr chipset. What struck me everything but audio.  So I installed a card SB X - Fi I found laying around.

  Thanks for the information!

• Driver for my HP DeskJet 1280 work with windows 8 pro 64-bit

  I need an updated driver for my HP DeskJet 1280 work with windows 8 pro 64-bit, has issued summer yet?

  No, and it will not be because the 1280 is an abandoned product.

  What you have to do is to go to control panel > devices and printers > add a printer.

  When in the process, you can use Windows Update to search for a driver, take it. The list of compatible printers is growing exponential, and your should now be in the list of printers HP or Hewlett Packard... This may take a few minutes to grow...

• HP DM1-4110SD touchpad freeze and sometimes keyboard under Windows 8 Pro

  Hello

  I have the following problem:

  When I use the netbook with Windows 8 Pro (64-bit) after some time, the keyboard or touchpad will freeze. I have seen under drivers and downloads there is a fix Windows 7 (KB2621491), but this fix is not available for Windows 8.

  I tried to disable the sleep for the USB root hub, but that doesn't seem to work.

  Is the fix is going to be available for Windows 8, or y at - it another way to make this work?

  Hi Speeder.

  Most of the W7 drivers will work W8. I'm not sure that an individual. More than likely HP won't to material support for W8 on any system purchased before October 1, 2011.

  Take a look at this document http://goo.gl/CO6uV , which provides information on the upgrade of Windows 7 to 8, driver compatibility and much more.

  Please let me know if it helps.

• Intermittent USB mouse freeze on Windows 7 Pro 64-bit. Tested with several mice that work fine on other computers.

  I am having a frustrating problem where my Wired Optical mouse appears to 'freeze' for 10 seconds on my machine Windows 7 Pro 64-bit. Meanwhile, everything else on the computer works fine, including the keyboard (connected through PS2). The mouse does not seem to lose power because down the red LED stays on. At the end of the freeze period, I hear the sound of Windows to disconnect USB, but there is no error or windows pop-up ads of any kind on the screen.

  Some more info about the configuration:

  * Core i7 950 processor
  * 12 GB of RAM
  * Radeon HD4950 video card (or almost)
  * The main SSD drive
  * 2 external powered USB drives, 1 powered MIDI keyboard, 1 USB dongle
  * Windows experience score 7.3

  I tried things that did not work:

  • Turn off all the power management, including the management of power supply for USB, USB hubs-> suspend to win power, etc.
  • Permutation of mouse. The problem came with three different mouse from different manufacturers.
  • Try the mouse on different computers of W7 Pro. Confirmed that the mice are not the problem.
  • Disconnected all other USB devices except the mouse. Problem persists.
  • Uninstalled all the drivers for the mouse and use MS default drivers.
  • Installed the software Microsoft mouse & keyboard center.
  • Installed the software from the manufacturer (ie. logitech) specific mouse driver.
  • Tried every USB port, the front and back, on my computer, including USB3 vs USB2.
  • Scanned for malware (using Malwarebytes)
  • Search for viruses (using Nod32)

  I must point out that NO other devices are having problems on this computer. My external hard drives all work perfectly. My printer when I plug it, works great, like my USB dongle. My MIDI keyboard never loses connection. Even when I have my phone connected Android, which normally creates a huge noise if I unplug it, never disconnects even for a second. It is therefore clearly a kind of mouse problem.

  The problem seems to occur regardless of what I do, although it seems MORE common if I use actually the mouse. If I'm just typing (as I am now) it seems not really to happen. On the other hand, sometimes hours go with no problem and other time it happens literally every few seconds.

  Remove the check to "improve the accuracy of the printer" logic. I had two computers windows 7 x 64 that gives me the same problem. When I tried a wireless mouse, the problem disappeared. they do not use the windows controls.

• Maximum memory for Pavilion DV7t special edition running Windows 7 pro 64-bit with Intel i7 Q720

  I have an entertainment 2009 Dv7t Special Edition running on Windows 7 64 bit with intention processor i7 Q720 @1 .60GZ. I have 8 G of ram now but need to go to the top. Can I put two 8 G in the slots. Read some reviews say the software works and Windows 7 pro 64-bit can take up to 132 G RAM, if that was even possible. I run two internal drives. But with the addition of the cloud and running photoshop on cloud too much memory is used, slow down the computer. You want to go to 16. Everybody does and no problem?

  Thank you

  Hello

  As mentioned previously, there are SEVERAL dv7t editions and special editions. We have dv7t-3000, 4000-dv7t... and it is very difficult to find the right plug. Please use the following link to find the product/model number:

  http://support.HP.com/us-en/document/c00033108

  Your machine could be the following:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us & dlc = in & lc = in & product = 5292645 &

  If so, the #4 on the following manual page it support 16 GB max:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us & dlc = in & lc = in & product = 5292645 &

  You can have 2 x 8 GB, no choice. Only a few portable computers that have 4 slots and supports up to 32 GB. No way on this earth at this time, you can find a laptop that supports the 132 Gb of RAM.

  Kind regards.

• HP Pavilion 15 lowered a score of 8.1 for Windows 64-bit for Windows 7 Pro 64 bit driver problem

  I just downgraded a HP Pavilion 15 Notebook, which was just recently bought with Windows 8.1 64-bit installed.

  The owners could not get with Windows 8, so they bought Windows 7 Pro 64 bit.

  After changing the option of Secure Boot UEFI BIOS, I installed windows 7 for them, installed the drivers from the site HP Web for this model of laptop, but there are a few drivers who will not not turn on.

  Product number is F8S59EA #ABU

  SYS ID card is 2163

  Intel processor Core I5-4200U @ 1.60 GHz

  8 GB memory

  BIOS Version F42 has been upgraded to F62

  But there is a PCI device in device without driver manager now, details of the error are:

  PCI DEVICE

  Hardware ID

  PCI\VEN_10EC & DEV_5227 & SUBSYS_2163103C & REV_01

  There is also another error of unknown device listed, the details are:

  The unknown device properties

  Hardware ID

  ACPI\HPQ6007

  I don't know if this is related to the first error message, but I thought I'd list them here anyway.

  In addition, try to install the software Cyberlink listed on page of drivers for this laptop, Cyberlink Director Photo software, the software Cyberlink PowerDVD and PowerDirector Cyberlink software all refuse to install.

  PowerDVD and PhotoDirector gave "Software can be installed in the machine allowed" error message and PowerDirector gave the error message "is not a valid HP drive, the installer stops now.

  If someone could please help in telling me that drivers are missing, (I enter all the machine ID in the box HP drivers, pilots said it remained for this machine, installed correctly, just these some problems) I would be most gratefull and the owners of laptops would be too!

  Mushty wrote:
  

  I just downgraded a HP Pavilion 15 Notebook, which was just recently bought with Windows 8.1 64-bit installed.

  The owners could not get with Windows 8, so they bought Windows 7 Pro 64 bit.

  After changing the option of Secure Boot UEFI BIOS, I installed windows 7 for them, installed the drivers from the site HP Web for this model of laptop, but there are a few drivers who will not not turn on.

  Product number is F8S59EA #ABU

  SYS ID card is 2163

  Intel processor Core I5-4200U @ 1.60 GHz

  8 GB memory

  BIOS Version F42 has been upgraded to F62

  But there is a PCI device in device without driver manager now, details of the error are:

  PCI DEVICE

  Hardware ID

  PCI\VEN_10EC & DEV_5227 & SUBSYS_2163103C & REV_01 is a card reader.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63708.exe

  There is also another error of unknown device listed, the details are:

  The unknown device properties

  Hardware ID

  ACPI\HPQ6007 is the software of HP 3D Driveguard

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1&cc=us&DLC=en&LC=en&OS=4063&product=6732717&sw_lang=

  I don't know if this is related to the first error message, but I thought I'd list them here anyway.

  In addition, try to install the software Cyberlink listed on page of drivers for this laptop, Cyberlink Director Photo software, the software Cyberlink PowerDVD and PowerDirector Cyberlink software all refuse to install.

  PowerDVD and PhotoDirector gave "Software can be installed in the machine allowed" error message and PowerDirector gave the error message "is not a valid HP drive, the installer stops now.

  If someone could please help in telling me that drivers are missing, (I enter all the machine ID in the box HP drivers, pilots said it remained for this machine, installed correctly, just these some problems) I would be most gratefull and the owners of laptops would be too!

• Cannot get Windows XP Home Edition for a mapped network drive / share on a computer of Windows 7 Pro 64-bit

  I constantly tried to use the "NET USE" syntax to get a Windows XP Home system to keep & share mapped network drive on a Windows 7 Pro 64-bit of the system and nothing I tried or worked on ANY blog. I can map the current network through made normal drive right click on 'My computer' and then provide a designation of drive letter with the correct path and have had great success using the function "connect using a different user name." However, even with the box checked to re-connect to the opening of the service is WORTHLESS! I made a lot of attempts to use the Net use syntax to create a batch file to overcome this non-functional raw application. I would really appreciate someone who actually had this issue resolved and work. I have looked at all the Windows files on the XP machine, searched the registry about a possible switch, which could make the necessary changes and have made all necessary changes on the Windows 7 system to accept the mapped network share. Help!

  Hello

  Since you have a network with different OS' I hope that Win 7 is configured to run on asnetwork work.

  If evry thing is configured properly it can be a problem of how your router keep information network. With the help of Staic DHCP or IP static on computers could help solve the problem.

  Just in case you need to reconfigure your network.

  ---------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall isactive .

  Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  -----------------------

  Jack MVP-networking. EZLAN.NET

• How can I get Windows 7 Pro 32 bit automatically connect to drives mapped to the startup?

  How can I get Windows 7 Pro 32 bit automatically connect to drives mapped to the startup?

  Hello

  It should connect as much as the other computers with their car are on the account users are properly configured, security passwords are defined and firewall do not block.

  If the system is only yours and there is no need of local network security, enable the guest account on all computers, give them all the permissions and there will be less to worry about connection mapped, but local drive without security.

  PS Ce preceding is based on cable connections. If the connections are wireless, it's another story.

  Due to the maturity of the wireless adapter and their support through the OS, automatic connection could not occur.

  Wireless is great, but most of us try to sneak out of it the uses it was not designed for.

  -------------------------------
  My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.

• Windows 7 Pro 64 bit black screen with the mouse only on startup and nothing else

  Hi there, Windows 7 system recently froze on me when I tried to move a large file on a USB hard drive. I didn't was not able to close the file so I decided to stop my PC with the regular start-> Shut Down.

  Now when I try to turn on my computer, after the "starting Windows" and Microsoft report goes to a pure black screen with just a (mobile) mouse cursor, not keyboard commands or click right work (eg. ctrl + alt + delete does nothing).

  I tried to start in safe mode, safe mode with network, they do the same thing after the "Starting Windows" screen. Tried to boot with my Windows 7 Pro 64-bit installation disk so and entered commissioning repair - no problem. Tried system restore and it went successfully, however after clicking restart is again the same thing!

  It's really making me crazy, could someone please help me? I really want to reinstall Windows and lost my files (since I can't even in a form any Windows Installer interface I'm not able to do a repair).

  Thanks in advance for your suggestions!

  I will proceed to a re - install now, thanks anyway for your efforts