Drivers for a Deskjet 3050 J610a will be dependent not on a HP PC with Windows 7 (64 MB).

Drivers for a Deskjet 3050 J610a will be dependent not on a HP PC with Windows 7 (64 MB).  Went through all the steps of self-help without result; any suggestions?  Thank you.

OK, I wanted to just make sure the correct standard troubleshooting had been done. Because it does not sound like a system problem (this is why a system restore has been previously recommended), I recommend that you try a tool launched by Microsoft called Fixit. See the link below for more details:

http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

Tags: HP Printers

Similar Questions

  • DeskJet 3050 J610a: We could not retrieve the list of drivers for your product (3050 J610a)

    I have the HP Deskjet 3050 J610a. Printer worked fine on my machine Win 8.1. Just got reimagee to the same machine (Win 8.1) and had to reload my drivers for the printer. Site displays the following message when I select 3050 J610a with Windows OS. I can't add the printer to the computer as pilot given result is not available... was here last year.

    Anyone has a suggestion. My other computer on Win 10 works and driver is available.

    We were able to retrieve the list of drivers for your product.  Please select the desired operating system and select "Update" for a new attempt

    Hello

    It is still there:

    http://ftp.HP.com/pub/softlib/software12/COL34584/al-109394-3/DJ3050_J610_1315-1.exe

    A quick victory is first install it on your computer. Please download and install on your machine.

    Kind regards.

  • Drivers for HP Deskjet 3050 J610

    I bought a Sony VAIO in November last, installed the drivers for my HP Deskjet 3050 J610 and it worked perfectly until February. The operating system is Windows 8, 64-bit. Since then, I have reinstalled the drivers about 5 times. Usually, I can print as soon as the drivers have been installed, but I get a message telling me that the drivers are not installed the next time I turn on the laptop and try to print. Sometimes, after what appears to be a successful installation, I still get the same message.

    Hello

    As OEM HP is responsible for the good operation of the printer and their
    drivers provided. Check with HP support, their documentation online and
    drivers and ask in their forums.

    Try printing HP and Scan Doctor for Windows
    http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146

    Good luck, you need to update or reinstall the latest driver.

    HP - printers taken in charge for Windows 8 (8.1)
    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c03168175&cc=us&DLC=en&LC=en&product=3794625

    HP - how to get your printer works with Windows 8 (8.1)
    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c03494007&cc=us&DLC=en&LC=en

    Drivers and software HP Deskjet 3050 All-- One Printer - J610a in -.
    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=4066452&LC=en&cc=us&DLC=en&lang=en&cc=us

    HP Deskjet 3050 All - in - One Printer - J610a - support and troubleshooting
    http://h10025.www1.HP.com/ewfrf/wc/product?product=4066452&LC=en&cc=us&DLC=en&lang=en&cc=us
    HP support/troubleshooting & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    ================================================

    The main issue is probably the drivers, but these can help:

    Windows 8/8.1 - Fix printer problems
    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Windows 8/8.1 - How to solve printing problems in Windows
    http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problems

    Windows 8/8.1 - install a printer
    http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

    Windows 8/8.1 - find and install printer drivers
    http://Windows.Microsoft.com/en-us/Windows-8/find-and-install-printer-drivers

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • series Deskjet 3050 J610a: looking for drivers

    I recently put 10 Windows (in Windows 7) to my laptop and I lost my printer. It is more compatible and I wonder if I can find a new version of the drivers, an update of Windows 10. I searched on the HP site for updates, but I found nothing. Thank you.

    A web search gives your answer...

    https://www.Google.com/search?q=DeskJet+3050&ie=UTF-8&OE=UTF-8

    And the website of HP with Windows 10...

    http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-3050-all-in-one-printer-series---J6/4066450/model/4066451

  • DeskJet 3050 all-in-in-one J610a: Deskjet 3050 J610a cannot install scanner

    1. I tried to install the printer software for the Deskjet 3050 all-in-in-one J610a on a Dell E6530 with Microsoft Windows 7 Professional computer.

    2. but everything he tried guard fails with the message "installation Failed - the software for your printer cannot be installed."

    3. When you click on the ' details button it shows
    "Setup error. Install the Windows service could not be accessed. This can occur if you are running Windows in safe mode or if Windows install is not properly installed. Contact your support team.

    4. you will then have a solution. He then puts a document "default installation HP - 1601 MSI' on your desktop."
    a. He then opened Windows services to check if the Windows service install is running? Yes it's on my system.
    If I reinstall the same mistakes, as shown in the 2. and 3.

    5. I tried to replace the Windows Installer by running the commands ' msiexec.exe / uninstall ' and "msiexec.exe/regserver" (also tried in safe mode) for both 32-bit and 64-bit versions. Then by restarting. But making the same mistakes as in 2. and 3.

    6. I tried the installation CD and the last Installer downloaded DJ3050_J610_1315 - 1.exe from the Hewlett-Packard Web site. But making the same mistakes as in 2. and 3.

    7. I tried to run Microsoft Fix - it version 50809 who had another option to try. If you run it, it says 'creation creating a restore point, please wait... '. ». After a wait, he says "this Microsoft Fix - it impossible to deal with".

    I tried another more recent version of Microsoft Fix - it (downloaded from the Internet):
    MicrosoftFixit.ProgramInstallUninstall.Run.exe
    Running to check installation problems showed a list of programs to check installation problems.
    But it did not show the installation of HP DJ3050_J610_1315 - 1.exe file or similar in the list it could
    not be fixed.
    If you choose "not listed" then it shows "we have not identified any problems and that's why no fixes have been applied.

    8. If I run the files D3050x64.msi and D3050x32.msi from the CD (using Microsoft Windows install) it also fails with the error, as in 2. and 3.

    9. If I install ' HPSupportSolutionsFramework - 12.3.11.29.exe' it installs, but does nothing. It's probably not running and no instructions on how to do work.
    Update: it is actually a service running in the Microsoft Windows services such as 'HPSupportSolutionsFrameworkService '.
    The executable file is located in C:\Program Files (x 86) \Hewlett-Packard\HP Support Solutions\HPSupportSolutionsFrameworkService.exe
    This service runs, but does not seem to be enabled.
    It adds a controller service background that adjusts automatically to
    run. Delay the start of this service is possible thanks to the function
    Manager. A scheduled task is added to the Windows Task Scheduler in order
    to start the program at various times demand (variable hours of work
    Depending on the version). The software is designed to connect to the
    Internet and adds exceptions to Windows Firewall to do this
    undisturbed.
    Scheduled task
    hpsupportsolutionsframeworkservice.exe is intended as a task with the class '{98FA553D-D703-4E16-9884-F328AC21770F}' (works on registration).
    Service
    hpsupportsolutionsframeworkservice.exe runs as a service named "HP Support Solutions Framework Service" (HPSupportSolutionsFrameworkService) "this service allows the detection of HP products and allows the identification of support solutions for detected products.".
    Boot file (user run once)
    hpdia.exe is loaded only once in the registry of user (HKCU) current as a name of boot file "HP download and install wizard" that charge as "C:\Program Files (x 86) \Hewlett-Packard\HP Support Solutions\Modules\HPDIA.exe" / reboot.
    Windows Firewall enabled program
    hpdevicedetection3.exe is added as a firewall exception for "C:\Program Files (x 86) \Hewlett-Packard\HP.
    Check "Windows Task Manager" for example by running the command line
    Schtasks.exe
    or to run GUI
    Start taskschd.msc
    did not show anything about this service I can say.

    10. by using a troubleshooting earlier, I managed to install * only the printer *. But the * scan * can not be installed.

    See:
    https://community.Spiceworks.com/topic/443342-Windows-7-PC-keeps-trying-to-install-WSD-print-device?...

    1 - run
    rundll32 printui.dll/s/T2
    (this from the cmd.exe command line)
    2 - I couldn't find the 3050 in the list of default constructors (for example, "HP")
    3. - click on the button ' Add... »
    4 - click on the button "next".
    5 - automatically activated for example is 'x 64' '.
    6 - click the button "next".
    7 - click on the 'Have Disk' button... »
    8 - fill the printer Hewlett-Packard CD-ROM drive letter that
    should be in your computer
    For example
    D:
    9 - who will install the printer driver 3050 J610 and display it in the list
    10. - click on the 'Start' button of Microsoft Windows
    11. - Select from the list of "devices and printers".
    12 - if the printer 3050 J610 appears, right-click on it and select
    "Troubleshoot", if not right click, "Add a printer", make sure that
    your printer is on, and then select the printer 3050 and let
    It installs.
    13 - run the first fix to get the printer driver
    14 - run the second fix to make the printer the default printer
    15. - successful on Microsoft Windows 7 Professional execution

    (11 for example if I run the program "HP print and scan doctor program" to troubelshoot (= HPPSdr.exe) it is said that the ' HP445411 (HP Deskjet 3050 J610 series - network 192.168.1.49) - installed). It is said that the full product is not installed, then begins to download. But the executable that it downloads the same DJ3050_610_1315 - 1.exe as downloaded on HP website. So to make the same mistakes as in 2. and 3.

    12 Note: I basically never have no problem with installation on this computer. Only this printer HP 3050 J610a software does not always install.

    13 - tried to run pnutil.exe

    Because I managed to install the * printer driver (but not the * scanner driver) using the command
    rundll32 printui.dll/s/T2
    I was looking for a similar solution method for the scanner.
    So tried for example
    RUNDLL32. EXE, SETUPAPI. DLL, InstallHinfSection DefaultInstall 132 HPScanMiniDrv_DJ3050_J610. INF
    but which failed with the error "failed to install".
    Also tried to navigate this HPScanMiniDrv_DJ3050_J610 file in Windows Explorer. INF
    then right click on the file name and select 'install' in the list, but that showed a dialog box
    "Install error - the INF file selected does not support this method of installation".
    Then I found this link:
    https://social.msdn.Microsoft.com/forums/Windowsdesktop/en-us/60f4b917-93c9-400A-B91A-15375a8793bf/i...
    who suggested using the Microsoft «pnputil.exe» program
    After inserting the installation CD original HP located in D:
    and it points to the file ' HPScanMiniDrv_DJ3050_J610. INF'
    which is present by default on this HP CD,
    and by running this command:
    --- cut here: begin --------------------------------------------------
    d:\ Tuesday, May 30, 16 16:32:33 > pnputil
    Microsoft PnP utility
    Use:
    ------
    PnPUtil.exe [f |-i] [-? |-| d |-e]
    Examples:
    PnPUtil.exe - an a:\usbcam\USBCAM. INF-> Add package specified by INF USBCAM.INF.
    PnPUtil.exe - a:\drivers\*.inf-> c add all packages in c:\drivers\
    PnPUtil.exe-i - one a:\usbcam\USBCAM. INF-> Add and install the driver package
    PnPUtil.exe EI-> list all packages 3rd party
    PnPUtil.exe d oem0.inf-> delete package oem0.inf
    PnPUtil.exe f d oem0.inf-> Force delete package oem0.inf
    PnPUtil.exe -? -> This form to use

    So I ran this command:

    d:\ Tuesday, May 30, 16 16:33:39 > pnputil-i - one HPScanMiniDrv_DJ3050_J610. INF
    Microsoft PnP utility
    Processing inf: HPScanMiniDrv_DJ3050_J610. INF
    The driver installed on a device on the system.
    Successfully added driver package.
    Published name: oem115.inf
    Total attempted: 1
    Number was imported successfully: 1
    --- cut here: end ----------------------------------------------------

    The disk check showed the file "oem115.inf" was indeed installed in the directory "c:\windows\inf\".

    During troubleshooting earlier, I already copied the file
    HPScanMiniDrv_DJ3050_J610.dll
    Located on the HP installation CD
    in the folder
    c:\Windows\System32\
    and also to
    C:\Windows\SysWOW64\

    I then run the steps here:
    http://Windows.Microsoft.com/en-us/Windows/working-with-Scanner-Camera-Installation-Wizard#1TC=Windo...
    Before using the wizard, connect your scanner or camera and turn it on.
    If Windows detects the device and installs the correct driver, you're all set. There is no need to run the wizard.
    To start the scanner and Camera Installation Wizard
    Open the wizard scanners and cameras by clicking on the
    Start button, then click Control Panel.
    In the search box, type scanners and cameras and then click Scanners and cameras.
    Leave administrator needed if you are prompted for an administrator password or a confirmation,
    type the password or provide confirmation.
    I can't find that on Microsoft Windows 7, but clicked on the button 'add a device '.
    This shows the scanners currently present on the system.
    If it is present, double-click it.
    Microsoft Windows will be found the driver for you.

    But he could not find a scanner or install the scanner driver.
    So not solved.

    14 - Note: If a successful installation: for example, you should be able to see the
    device scanner in 'Start' > 'Control panel' > 'System' > ' Imaging
    devices

    15 - I then tried to run Windows fax and scan program
    (you need to install first)
    WFS.exe
    But not find scanner.

    16 - I then connected the printer with a USB cable to the computer.
    He began the installation of the driver and reported a successful installation
    and analysis successfully.
    I guess that somewhere in the previous steps, that the pilots were in the right
    place.
    But it works with my attached USB cable.
    If I try to remove the USB cable it says
    "Cannot find the scanner." No scanner or other source TWAIN found on the system'

    17. I also tried to run the Installation Wizard of HP printer
    http://support.HP.com/in-en/document/c03521864
    but that no longer works.
    It has detected now:

    "HP Deskjet 3050 J 610 series" - network
    But for the network one he noted a problem:
    "The wizard has reported a problem with the software driver for the selected printer."

    "HP Deskjet 3050 J 610 series" - USB
    For this version of the USB what he reported:
    "Basic features drivers seem to be installed for the selected printer." We recommend you to install the complete HP software to get all the features of the printer"

    If you click 'next' again it downloads the usual HP software that you
    can not install. With the same mistakes as in step 2. and 3. here.
    So no solution.

    18 - of the current workarounds:

    a. - possibly try some of the steps above which may take for example, the printer and scanner driver to the right place.
    Then connect a USB, Microsoft Windows should detect the printer / scanner
    and install the drivers.

    But printing should work wireless.

    Disadvantage:

    To analyze you will need to connect using a USB cable and the scanning doesn't work so not wireless.

    b. - buy or use Hamrick VueScan. It installs its own drivers to scan.
    But it is not free software. But it works by scanning wireless also.

    Question: If you have the best solution or workaround solutions, for example to activate
    scan wireless too, please let me know.

    Hello @knudvaneeden,

    It is a great place to get help! I read your post and see that you receive an error when trying to install the software to print, but you have finally managed to install the printer by a USB connection. When you use the printer as a wireless connection, you are not able to scan. Please provide all the detailed steps that you have already tried. I want to help you solve this problem.

    Make sure that you disable the Antivirus software and scan in real time if your software Antivirus has this feature. It can affect the entire software installer.

    Follow this document to see if you can install all drivers: HP monofunctional and printers multifunctional - installing software Fatal Error "fatal error 1601' (MSI error 1601) displays for HP. »

    Try the scan of the painting to see if you have the same problem.

    Run the Print and the doctor Scan and let me know the error codes or if everything is checked. You can attach a screenshot.

    Scanning ports is not open on the router to the origin of this problem. You can contact the router company to verify and to open these ports 9220/9500/427 on the router.

    You can click the 'Thumbs Up' to thank me for my efforts! If this helps you resolve the problem you are experiencing, please click the "accept as Solution. Keep me posted. Good luck!

  • DeskJet 3050 J610a - unexpected wireless connection problem.

    Running:

    10.7.4 MacOSX

    HP software: HP_Lion_Ink_SW_v12.13.17

    Printers: Deskjet 3050 J610a worked perfectly via a wireless connection

    MacBook5, 1 Intel Core 2 Duo, while I had been with HP Software HP_Installer_DJF4100_v9.7.1, which has been * no * intended for this printer, but I was able to "ADD" the printer Deskjet 3050 through preferences system, through the HP Socket,

    [Recklessly] looking for a more "functional" configuration, I looked at HP support and found that a specific software was released for computers running "Lion".

    So I uninstalled the previous DJF4100 software, restarted the computer and installed the new software and drivers for Lion as described above.

    Now the printer Deskjet 3050 J610a appears in the network of the computer under "devices" as

    "HPJ610a.047DED", Type: computer network computer. It is also detected with.

    ' Security: no ', while my Wi - Fi throughout the House network is encrypted with WPA/WPA2 Personal.

    I could of course decline on the previous software and configuration, but before that I would like to understand why this new software, which was released by HP for Mac computers running Lion behaves in such a way, why does the printer as a standalone device (which she has never done it before).

    As I said, before I regress to the previous configuration, using a software program that initially is not required by the printer or by the operating system, I greet all the information and suggestions.

    I need the wireless connection!

    Thanks in advance.

    Okay, well, I think that a different router can only solve this problem dead.  Consider an Apple Airport Terminal.

    If you connect your Mac on the network 'JPJ610a.047DED', this is a direct link between your Mac and printer wireless (not involving only the D-link).  So, naturally, you shouldn't be able to get on the Internet with this arrangement.a

    When you run the HP software (Finder - go to Applications-> HP-> -> printer software installation &) it will allow you to connect your printer directly to your network with the temporary use of a USB cable.  He who does not?

  • HP Deskjet 3050 J610a ePrint questions

    I have a HP Deskjet 3050 J610a printer that is listed as being capable on the list of HP AirPrint compatible printers and ePrint.

    However, I can't a Web Services tab at all when you access either the printer via its IP address or in the printer menu.

    I can't find an update of the firmware on the support of the printer section and have had no response from HP email warranty covered. Can someone help get this job, I can print wireless easily from the main engine, it was installed on, but can't see the printer and any apps ePrint AirPrint apps. When printing the configuration pages any printer ID or e-mail address is printed. As active poster on the section of Microsoft Web services.

    The HP support pages only to see Help information about the ePrint for Photosmart printers and Officejet, Laserjet, Designjet even though they support Deskjet.

    Any help is greatly appreciated as this is starting to annoy me now...

    Hi all

    The matrix management model has been updated! DJ 3050 has been replaced by the 3050 a DJ, plus additional models were added.

    One more thing... If you have the mobile device (iOS, Android, Symbian) and a DJ 3050, you have a printing solution. You can install the free application of HP ePrint home & Biz. This app will allow you to print to ~ 200 models of different HP printers, including the legacy networking and HP printers compatible ePrint.

  • DeskJet 3050 j610a - printing problems

    I have a Deskjet 3050 j610a, who is about to throw in the trash. Print quality has deteriorated so that color printing is catastrophic and I tried everything suggested in the documents on this forum and HP assistance. The ink levels are OK. The paper is OK.

    When you browse the suggested fixes, when I get to the "page" to print and scan alignment, the alignment page is not detected.

    I completely deleted the software and drivers and re-installed the ' software HP Deskjet full feature driver and "of here.

    I am running Windows 7 and now when I go to start > all programs > HP > HP Deskjet 3050 J610 series > HP Deskjet 3050 J610 series, nothing happens.  Same thing when I double-click on the desktop shortcut pointing to 'C:\Program HP HP Deskjet 3050 J610 series\Bin\HP Deskjet 3050 J610 series.exe' - UDCDevicePage begin. Small swirling icon indicating the program trying to start and then nothing.

    I can't reach the 'printer' Actions / areas 'Tasks of Maintenance', etc..

    It takes too long to fix for a printer under $100.

    Should I persist or throw him out?

    Problem solved.

    I threw and bought an Epson.

    My time is worth more that it took to solve these problems.

  • HP Deskjet 3050 J610a: How to install portable computer on a new HP scanning software to win 10?

    My HP Deskjet 3050 J610a connected automatically to my new laptop so I don't have any software of HP in my laptop but I need to install the scan function.

    Hello

    Please download and install the following full feature software and driver and install it on your new computer:

    http://ftp.HP.com/pub/softlib/software12/COL34584/al-109394-3/DJ3050_J610_1315-1.exe

    and the following software will help you print photos:

    http://www.HP.com/global/us/en/consumer/digital_photography/free/software/photo-creations.html

    Kind regards.

  • DeskJet 3050 j610a does not print

    Hi, my Deskjet 3050 j610a has stopped printing in black or color. I use Windows 7 and Surface RT with this all-in-one wireless printer, and I have reinstalled the printer software earlier. HP diagnostic tools say the printer is fine, but it is not printing. It is visible to my computers and even paper and looks like it is printing. Just no images on the documents.

    Any ideas out there? Thanks for the attention.

    HTG

    Thanks for the suggestion. It turns out that HP tech support was able to understand my printing problem came to have old cartridges. I went to the store and got new ones, and now the printer is once again beautiful documents. Thank you, HP!

  • HP Deskjet 3050 J610: HP Deskjet 3050 J610 will not scan

    My Deskjet 3050 J610 will not scan. On the printer I ask him to sweep and I get "error Scan. Try the Scan of the computer.

    I have no instructions to achieve this. There is no icon for scanning and no sense.

    Thank you for your response. I downloaded and tested the necessary software and it worked perfectly.

    Thank you for helping me with a resolution.

  • DeskJet 3050 j610a all-in-One error code 620060E0?

    We have a Deskjet 3050 j610a (all-in-One printer), which has recently started to display error code 620060E0. This happens when a wireless print job is sent to the DJ3050 by a Windows laptop or a Kindle. The problem seems to disappear briefly whenever I turn off / printer and we send the printjob. Then the print job seems to print Ok, but the 620060E0 error code seems to reappear in the next a few print jobs. What does error code 620060E0 for and how to prevent this DJ3050 of print jobs stop and later have to be resubmitted? Our HP DJ3050 diet bad? I tried searching the Internet and that you can find no reference to this HP error code 620060E0... Thank you, Steve

    It is strange that HP has never answered and did not display of error codes for simple problems like this for the benefit of other users of their products. Turn the printer on/off/as suggested does not solve the problem. This simple problem requires no expensive 3rd computer service. The problem was solved only when I noticed black in the accumulation on the ink cartridge close contacts computer & replace the cartridge. The printer now works fine.

  • 301 cartridge 61 AND compatibility Deskjet 3050 J610A UK version

    Have tried to replace my 301 cartridges with 61 cartridges, purchased in the USA on my Deskjet 3050 J610A...

    rises "Both cartridges are incompatible" and yet HP websit e and the new cartridge says cardboard 61 s are good for my printer.

    Would be grateful for the advice of anyones.

    Am in the United Kingdom

    Thank you very much

    301 s and 61 s are for the different regions. If you live in the United Kingdom you should use 301.

    http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/finding-and-installing-cartridges-after-moving-to-a-new/TD-p/740553

  • drivers for hp deskjet 959c for mac. s/n ES13Q18182

    I need to print with my printer, I coolor. I must hav drivers for hp deskjet 959c. Pleace help me!

    Unfortunately the 959C is not supported to 10.8.

  • HP Deskjet 3050 All-in-oneJ610: impossible to get my drive to load Windows 10 so I can install my scanner

    When I switched to 10 Windows 7 my devices were on but I did a restore and lost the scanner. The disc will not load to Windows 10, only Windows 7. How can I fix this. I always have my printer though.

    Hello

    Thank you for using the HP forum.

    You can download and install the software COMPLETE features of HP printing for your operating system:

    http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-3050-all-in-one-printer-series-J610/4066450/model/4066451#Z7_3054ICK0K8UDA0AQC11TA930C7

    Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

    Hope that helps.

Maybe you are looking for

  • modem restarts when I send an email

    When I send an email updated the and try to send it, my internet modem restarts.This does not happen if I use outlook express by using the same email.This happens on my windows 8.1 and computers windows XP.It starts happening a few days ago and I tho

  • Recovery Disc creator failure after HARD disk failure

    Hello guys,. Need your help... My HARD drive failed and I bought a new one.It has already installed my backup CD OS...My installed recovery disc creator error like this "space no HARD drive recovery!The toshiba Recovery Disc Creator can not be starte

  • How can you save the image to a google map that is contained in a Web site?

    How can you save the image to a google map that is contained in a Web site? I use a macbook at the beginning of 2011 pro and functional on OS X Yosemite 10.10.5. I would like to capture the image of the map and print it with a good quality.

  • MAX does not show my Instrument GPIB

    Hello. I have an instrument which I control through GPIB interface. The instrument is a model of arbritraty 301 Wavetek function generator. I already downloaded and installed the drivers for this mode of the instrument. I want to control this instrum

  • video display on SD via computer problems

    I'm trying to copy a video from my sd card on my computer.  I already copied the pictures more successfully, except that the video does not appear on the sd card on the computer. I can watch the video on the camera, but it does not appear in the fold