drivers for Intel Pentium 4 cpu 2.40 ghz

Hay Iam looking for all drivers for Intel pentium cpu 2.40 ghz

Hi Rohit, there is no drivers for the processor, the operating system will automatically find the processor. I guess you mean drivers for chipsets and devices of Council on and for this you will need the brand and model of the main map, if you look at the motherboard, you should see that he stamped somewhere. Once you have that go to the manufactures website and download the drivers.

If you try to install your CPU on a motherboard, you will first need to know it is supported, same answer, go to the web site of decision-makers.

Tags: Windows

Similar Questions

  • Drivers for Intel Centrino Wireless N2230

    Cleaning not installed 8.1 and Windows on the page my laptop no drivers for Intel Centrino Wireless N 2230 wifi and Bluetooth.
    Help to find the drivers?
    My laptop is HP dv7 7355er ENVY.

    Hello:

    You can get them directly from Intel on the link below.

    Wireless: only (64-bit) driver is the second file on the list.

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=23726&lang=eng&OSVersion=Windows%208.1%2c%2064-bit * & DownloadType = software % 20Applications

    BT: Second listed file is 64-bit.

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=23999&lang=eng&OSVersion=Windows%208.1 * & DownloadType = software % 20Applications

  • Help drivers for Intel Centrino Wireless N2230

    Cleaning not installed 8.1 and Windows on the page my laptop no drivers for Intel Centrino Wireless N 2230.
    Laptop HP dv7 7355er ENVY.

    Please see my response to your other post on the link below...

    http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/drivers-for-Intel-Centrino-wireless-N2230/m-p/4138378#M71527

  • Equium M40X: Can I put the CPU for Intel Pentium M750

    Hello

    I have laptop Toshiba Satellite M40X-149.
    He has a * Intel Celeron M 370 * processor. Can I mount a * Intel Pentium M 750 * CPU on this motherboard?
    The processor is to another laptop Toshiba Satellite M40X-250.

    Can someone help me with this problem?

    Thank you very much.

    Ergu

    Hmmm usually replacement of CPU upgrade is not possible.
    In most cases, the don t match with the new CPU proprieties BIOS settings.
    I think that computers portable satellite M40X-149 and 250 SatelliteM40X were equipped with the same motherboard and possibly it's the new Intel Pentium M 750 processor could be supported.

    However, this is only a theory and my own experience there s always another story to put in practice.

    I wonder not if your laptop would not boot after upgrading CPU or would be overheating due to a higher internal temperature.

    So all you make are at your own risk.

    Good bye

  • Dell Inspiron 15R (5521) drivers for Intel Centrino Wireless - N 2230 10/64-bit Windows

    Hey there!
    Please suggest me drivers for my Intel Centrino Wireless-N 2230 wireless network card.

    PC:
    DELL Inspiron 15R (5521)
    Intel Core i7-3517U CPU @ 1.90 GHz 2.40 GHz and 8 GB of RAM
    10 pro/64-bit Windows

    I should add that, first of all, I have improved my previous windows (W8.1 to W10 pro and everything worked perfectly (including the wireless network card) until I did a clean install of W10 pro... everything works fine except the adapter.)

    Also tried the drivers from the website of the manufacturer (DELL)... but no driver is listed for my card. I tried even to those who are listed IE wireless Dell 1703/1705/1901 & Dell Wireless 1704, but none of them worked. Also given a test for the drivers supplied by Intel... but has not worked.

    Well... seems that driver is not yet or I'm just missing.
    However when I search the drivers for another OS (like W8.1)... my driver for the card is registered, so South I return to W8.1 for now or just wait for the new drivers...!

    Please answer ASAP

    (: :) CHEERS)

    Hey mate!

    I understand your problem... but no one bothers even respond! ***!

    Well... I've set things on mine!

    What have I done?

    Yet once, I did a clean install of W10... updated my drivers except the ones adapter!

    Instead of using the latest drivers, I downloaded the drivers for Bluetooth and Wi - Fi for an OS as W8 diffenent... even if I was not convinced that they r going to work... but anyway... thought to give it a try!
    AND THIS FIXED EVERYTHING!

    The drivers installed without hassle!
    AND EVERYTHING WORKS FINE NOW!

    Hope this helps u.

    PS - Don't forget to say thanks!

    (: :) CHEERS)

  • Windows 7 can run on CPU Intel pentium 4 with 2.93 ghz speed?

    The configuration of the system is:

    Intel pentium 4 2.93 GHz, 1.2 GB of RAM.

    Yes, it can, but if you can move it, I double the amount of RAM of 2 GB.

    The 32-bit version of Windows 7 would be also sufficient for such a configuration.

    System requirements:

    * 1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor

    * 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)

    * 16 GB of disk space available (32-bit) or 20 GB (64-bit)

    * Peripheral figure DirectX 9 with WDDM 1.0 or higher driver

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    The upgrade to Windows XP?

    Please read these instructions carefully and completely before you begin installing Windows 7: there are important steps that you must follow to upgrade your PC from Windows XP to Windows 7 in order to preserve your files and settings.

    Before you begin, you'll need to backup all your data to an external storage device, and you will need all the installation discs for the programs that you want to keep. Please make sure that you have an external hard drive (see details below).

     

    More detailed instructions are available at windows.microsoft.com/upgrade-windows-xp. Here are the basic steps.

    1. start Windows Upgrade Advisor (windows.microsoft.com/upgradeadvisor) to see if there are known issues that may affect the installation and the question of whether you should install the version of 32 or 64 bit Windows 7.

    2 back up your files and settings on an external hard drive using Windows Easy Transfer (windows.microsoft.com/windows-easy-transfer). If you do not have an external hard drive, you will not be able to use Windows Easy Transfer. Alternatively, you can copy the files you want to keep on a USB stick, CD or DVD.

    3. you will need to manually reinstall your programs, such as Microsoft Office, after I installed Windows 7. Gather the installation for your programs and all partner/license product key discs. You may be able to download programs from the Internet. For example, Windows Live Messenger can be installed from the download.live.com/messenger.

    4. Insert the Windows 7 DVD in your PC. When asked "which type of installation you want. Click on "Custom (advanced)."

    5. when Windows 7 is installed, use Windows Easy Transfer to restore your files and settings.

    If you are not comfortable Windows 7 installation, check with a local retail or the services of the PC company store to see if they offer upgrade services.

    http://www.notebooks.com/2009/10/13/WinXP-to-Win7/

  • How to set up an alert for cpu use > 90% on a processor Intel Pentium 4 cpu solaris box

    I would like to set up an alert to warn me if the CPU usage is greater than 90%. The problem is there are 4 processors. I can create an alert for each of them to the cpu separately, but I would like to
    usr auto-regroupement CPU and have the fire alert if all 4 processors reach a level of 90%. Is it
    what I would do for the cpu monitoring.  I know that in the past our mysql service would get in a loop and use 90% or more of all processors.

    You must use the "CPU usage" metric platform rather every CPU indicator.

    German Laullon
    Web: http://www.laullon.com/
    PhotBlog: http://photoblog.laullon.com/

    On Monday, July 7, 2008 at 17:08, mike monczynski [email protected]> wrote:

    I would like to set up an alert to warn me if the CPU usage is greater than 90%. The problem is there are 4 processors. I can create an alert for each of them to the cpu separately, but I would like to

    usr auto-regroupement CPU and have the fire alert if all 4 processors reach a level of 90%. Is it

    what I would do for the cpu monitoring.  I know that in the past our mysql service would get in a loop and use 90% or more of all processors.

  • Satellite L50-A-1CU - can I use non-Toshiba drivers for Intel & Nvidia?

    I have some problems in Adobe Lightroom and Photoshop using the Toshiba drivers; can I use those of Intel and Nvidia, or there is something exclusive to Toshiba?

    Thank you very much
    Marco

    Hello

    In general, yes you can use them. Problem is that these drivers are not supported and tested by Toshiba for you to use their own risk.
    To be honest in the past years I've heard different stories about this. Some people are happy with the best graphics performance.

    Some people are complaining on very strong and permanent machine running to cold air. Even after that initial installation of image recovery the situation is the same. I ve heard say that the values in the GPU BIOS will be changed and it is not possible to recover their origin and default settings.

    There are also reports on the switch OFF as a result overheating.

    I put t know what to say on this subject. I use my machine with the original drivers. I don t want to risk anything. Of course, with your machine, you can do what you want, then that's your decision.

    If you install them please be so kind and send us comments. It can be very useful for other owners of laptops.

  • Drivers for Intel Corporation-Display-Intel(r) G965 Express Chipset Family could not install, error Code 80070103 details.

    Impossible to install, Code 80070103 error details

    Hello

    1. How do you try to install the drivers? Update Windows or from the manufacturer's website?
    2 did you change your computer, after which the issue started?
    3. you install the correct driver for your device?

    I would suggest you reinstall the device on the manufacturer's Web site and check if the problem persists.

    Uninstall or reinstall a device

    (Not valid also for Windows Vista)

  • Workstation 7 64-bit - support for Intel mode (i7 CPU)?

    Hi all

    do we know if Workstation 7 (latest version 64 bit) supports the technology Intel mode available in the Intel i7 (720, 820, 920 QM)?

    I have the i7-720QM which, by default, takes place in 1, 6 GHz and mode it should up the CPU at about 2.8 ghz but VMWare Workstation doesn't seem to be able to use/demand this... so still clocked at 1.6 ghz - very slow!

    Someone can confirm this, or plans to support the architecture of the Intel i7 in the near future?

    Thank you very much

    COS

    You use the 'balanced' in the host operating system power mode?

  • Intel Pentium 4 CPU: my problem is in my Start menu when I go to open a program, he said that "the parameter is incorrect."

    He said: "The problem with the shortcut" do not know how this happen or why and do not know how to fix it.    Help, please.

    SclafaniK

    Hello;

    Let me welcome you on the HP forums!

    I read your post on Start menu problems launching apps and wanted to help.

    As test, open one of the shortcuts on the desktop by right-clicking on it and choosing Properties.

    There is a box of the target, and there you will see the full path to the program file.  The file name must end with ".exe" write the full path to the bottom.

    Then open Windows Explorer, and using the information that you noted, navigate to the folder that contains this file.

    When you find the file, double click it and see if it starts.

    If so, the shortcut is "broken" and you need to replace it.  To do this, a right-click on the same file again and you should be the ability to create a shortcut.  Once created, drag that shortcut to your desktop.

    If the file does not launch, it probably means that it is corrupt.

    Try this with several other files.  If all fail, it means that you have file system corruption.

    And I think at this point there would be that your hard drive has failed - due to age and wear.

    Because it is almost impossible to find even XP these days, you will have to seriously consider replacing this PC with something more recent.

    Sorry, but the PC does not last forever.

    Good luck

    I'm a volunteer and I do not work for, or represent, HP.
    ========================================================================
    If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

    If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

  • Satellite A500-1F4 - update for Intel Core i7 CPU?

    Hey all

    Can I switch the processor of my Toshiba Satellite A500-1F4 (i5 - 430 m) to i7 - 720 q with no problems?

    Thank you.

    Hello

    Please, read here:

    http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

  • Windows 7 drivers for old bridge

    Hey guys, I recently got an old computer Gateway 510 SE. I had Windows XP on the machine for a while and wanted to install Windows 7 on it. I ran the "Windows 7 Upgrade Advisor" and everything was consistent. The only problem was that the Aero feature is not supported, but this isn't a big deal and didn't effect me that much. I then installed windows 7 on the computer and I easily installed the audio driver in Device Manager. However, I wasn't able to do it with the graphics driver or Modem PCI driver. I did some research and I very hard to find compatible drivers. Bare in mind that I did the following:

    -J' tried install not found drivers in "compatibility" Mode

    -J' tried install not found drivers as administrator

    I installed Windows 7 on an old Dell Dimension 2400 and works very well. However, I can't understand it. I'm very confused, and help would be very appreciated.

    Here are some features:

    Gateway 510 SE

    Intel (r) Pentium (r) CPU 2.60 GHz

    1.50 GB RAM

    Windows 7 32 bit

    Thank you

    Mark

    To start 1.5 G of ram will hardly and drivers will even official support site offers no more card reader and AHCI SATA for W7 drivers.

    Official support site

    Time to upgrade the computer if you really want to move to W7.

    If this isn't the case, I would stick with XP (half of the computer world is still using it) that he would perform the pants off of W7 on this computer, even if you could get the W7 drivers for it which do not exist.

  • Hello! I want to replace Intel Pentium T4300 processor Intel processor QX9300. Is it possible?

    This processor Intel Core 2 Extreme QX9300 (AW80581ZH061003) SLB5J CPU 1066/2.53 GHz
    compatible with Intel® Pentium® processor T4300 (2.10 GHz, 800 MHz FSB, 1 MB Cache) and Intel GM 45 Chipset Motherboard? My current CPU is Intel® Pentium® processor T4300 (2.10 GHz, 800 MHz FSB, 1 MB Cache)

    Specification of the motherboard:

    Manufacturer: Acer

    Model: JV50

    GM45/GM47 game

    Southbridge: Intel 82801IM (ICH9-M)

    Back on my laptop:

    Aspire 5738ZG-434G32Mn

    S/N; [private under the leadership of life]

    SNID; [private under the leadership of life]

    Best regards
    Catalin

    Acer does not show on the T4300 CPU upgrade. I don't think that the QX9300 will work just because I saw others trying to upgrade a T a q and it never worked.

    If you can find a seller that it will have to come back if it doesn't work, give it a try.

    I would probably try the T9500 or 9600 T if I was going to upgrade this laptop. T4400 to T9600 worked for me on a Dell computer.

  • I need the video/display drivers for my Dell Inspiron 6000 with Windows 8.

    I need the video/display drivers for my Dell Inspiron 6000 with Windows 8.  Laptop is the Intel Pentium M processor 2.00 GHz RAM, operating system, 32-bit on x 86.  My resolution is not at the right level and videos have hard play.

    I went to the ATI site and when I try to download their drivers, they will not be installed because they do not recognize the Windows 8 operating system.  The site of Dell's Windows XP operating system.
    Thanks for any help.
     
    [Moved from comments]

    Resolved - finally

    2 essential steps
    1 https://support.dell.com/support/topics/global.aspx/support/kcs/document?c=us&l=en&s=gen&docid=DSN_179256&isLegacy=true#Issue5
    Reconstructions of Dell should be loaded in a particular order until the drivers are installed, that is to say the controllers then the drivers for the chipset and resolution etc. They are specific to this.
    then;
    2 CharlesGrimes comment '... ". searching on my computer for the Dell under the old windows files and the old drivers were loaded. "I had tried this but not good. So went into a ghost of Dell image when the resolution was good on Win7, recovered files in windows/System32, which has old drivers. Does the update in graphic cards [Device Manager] driver and manually looked through above the files recovered from previous instal win7 and YES they charge this time.
    Oh what a relief to have a higher resolution. Experience had taught me how snappy Win8 is, I picked up a shortened bunch of ways to circumvent the operating system, and it is growing on me. WIN8 Pro works best on this old machine than its original Home XP and Win7.
    Thank you Carlos and others for your info that led to my positive resolution.

Maybe you are looking for