Drivers for NETGEAR WG311v3 54 Mbps Wireless PCI Adapter will not work.

Similar Questions

• My Atheros AR5007EG wireless network adapter will not work

  I have an Acer Aspire One AOA150ZG5 that only comes with Windows XP directly from the factory. I recently started having trouble with XP so I switched to Windows Vista Home Premium and now my wireless card doesn't work. I tried to go to the manufacturer's Web site, but they have only taken over XP, so I installed the XP driver and used the Vista Device Manager to update and it still does not work. Please help me I spent all my money on vista so I can't afford a new wireless card.

  If Acer is not taken support Vista for your model, there is nothing that can be done about it.

  Sorry about that.

  You can consult the Web site of the manufacturer of the wireless adapter.

  If they have no drivers Vista, same thing; nothing can be done about it.

  See you soon.

  Mick Murphy - Microsoft partner

• Wireless network adapter does not work on my Satellite A200

  Hello

  My wireless network adapter does not work under Vista. If I press FN + F8 nothing happens. Wireless communication is always offline.

  What can I do?

  Details:
  Typ: Atheros AR5008X Version: 7.2.0.164
  Laptop Satellite 200
  PSAE6E

  Please help me!
  Thanks in advance!

  Phil

  BIOS bug? I don t think so

  First of all, you must make sure that this isn't a hardware problem. In this case, insert the Toshiba Recovery CD and reinstall the operating system of this device. This will outline the laptop to factory settings. Notes; This would format the whole HARD drive.

  After the new installation, you must activate the WLan switch on the side of books, and you can then use the switch button FN + F8 to select the WiFi network.

  I assume that you have already configured your Wlan router. So the same settings such as the SSID, encryption of WLan, etc. must be defined on the laptop too.

• Linksys WMP54G v4.0 Wireless PCI adapter does not not in WIndows 8

  Just upgraded to Windows 8 Pro 64 bit and now my linksys Wireless-G PCI Adapter (WMP54G v4.0 model) no longer works. Worked fine in Vista and Windows 7. Well that under Windows 7, I had to use this http://www.walterglenn.com/2009/10/26/windows-7-64-bit-getting-the-linksys-wireless-pci-card-wmp54g-to-work/

  Any help would be greatly appreciated.

  I managed to make it work for Linksys WMP54G v4.1. Hope it will help.

  1. download the Driver Ralink Wireless LAN RT2500 (PCI/mPCI/CB) version 3.2.0.10/3.2.0.0

  2. run the Setup program on your machine, Windows 8

  3. in Device Manager, right-click Update driver software

  3.1 and select "Browse my computer for driver software".

  3.2 then select "Let Me pick from a list of drivers for devices on my computer.

  3.3 instead of choose any item from the list now, click on 'disk '.

  3.4 then navigate to the folder of installation of the driver package. On my machine, this is:

  C:\Program Files (x 86) \RALINK\RT6x Wireless LAN Card\Driver

  3.5 pick 'rt2500.inf '.

  3.6 then in the new manufacturer list, choose "Ralink Technology, Inc."

  3.7 in the network adapters list, choose "802. "11b / g Wireless PC Card"

  Happy Windows 8 here :)

• Portege M750 Win7 64 bit Wireless Manager (3G) will not work

  I can't TOSHIBA Wireless Manager (3G) to work in a new installation of Win 7 64 bit.

  I did a test installation of Windows 7 64 - bit on and old SATA hard drive and checked TOSHIBA Wireless Manager would work. He did.

  I then did a fresh install of Windows 7 64 - bit on a new Crucial C300 Real SSD 256Go.

  The new facility with the Crucial SSD is not very successful... The operation "stop and restart" does not - the closing not always power off completely and you must push the switch down to.

  Sometimes the SSD does not start - you enter the password of the BIOS but then nothing happens. Sometimes you turn off the power and remove the battery before as the startup disk.

  But the biggest problem is that the (3G) Wireless Manager will not work. The application opens and indicates that "died" - which it is impossible that I use WiFi to post this question.

  I tried to install the software Vodafone 3 G portal. It detects the presence of the 'mobile device' (SIM in housing) but then can not turn it on.

  I downloaded and installed all the latest drivers for the chip, the pilot 3G, 3G software, LAN driver, LAN software and all updates of Windows 7.

  I have the latest version of the BIOS (3.0) but this has not been updated by Toshiba since 11/04/09.

  I would point out that Diagnostic PC Toshiba tool does not recognize the installed 8 GB memory (but ccleaner):

  Model name PORTEGE M750
  Part number PPM75E-00N017EN
  Version of the OS Microsoft Windows 7 Home Premium 6.1.7600
  Version of the BIOS Version 3.00
  Processor Intel (r) Core (TM) 2 Duo CPU P8400 2.26 GHz
  Physical memory 4096 MB RAM
  Disk capacity hard 256,052,899,840 [bytes] 238.468 [GB]
  Network Intel(r) 82567LM Gigabit Network Connection = 10.0.2.2 version = MAC address
  TOSHIBA F3507g Mobile Broadband Network Adapter version 1.3.0.9 = MAC = address
  Version of Intel(r) WiFi Link 5100 AGN = 13.4.0.9 = MAC address
  F3507g Mobile Broadband Modem Modem TOSHIBA version = 5.24.3.0
  Internet Explorer 8.0.7600.16385

  This indicates a BIOS problem?

  -don't

  points to a problem of firmware on the SSD drive (is it sandforce) torque to the incompatibility of BIOS of the SSD.

  I assume that all drivers installed etc were identical on the installation of the trial of HARD drive? so if this is the case it must be the SSD does not not with the BIOS correctly, so the other issues as well

• WMP600n wireless PCi adapter do not reconnect after sleep

  I have a Linksys WMP600n PCi adapter installed in my desktop PC wireless and after recovering from the night before, he doesn't do not automatically reconnect.  I have you right click on the wireless icon in the system tray, then select "repair".  I would say this, it is 9 times out of 10 (1 times in 10 seems to me good luck and it restores the connection).

  I have a motherboard Asus M4A88TD-M with 1 GB of DDR3 RAM and I'm under Windows XP Home Edition (SP3).  There is only one PCi slot on the motherboard.  In addition, I do not use the software provided with the product, but rather the native wireless networks wireless network software application supplied with Windows XP.  I had this problem with the original driver that comes with the product CD and the problem persists with the latest version of the driver.  I have no active set into hibernation and there is no power active modes of economy on the PC.

  I have considered all options in the properties/Advanced tab Wireless 600n and the awake mode the continuously and disabled the power saving Mode, but the problem persists.

  I have two other PCs with older PCi Linksys WMP300n cards and they don't exhibit this behavior after recovering from the previous day - they reconnect with reliability.

  Anyone else have this problem with WMP600n PCi cards?  All solutions?

  Thanks in advance.

  I found the problem.  There was a program called "Hot Spot Shield' on the PC that installed a virtual connection of the Miniport network ("Anchorfree HSS adapter") along the side of the hardware (PCI) wireless network connection.  The operating system seemed unable to load any network connection during the restoration of the day before due to the presence of these two active connections.  The solution was simply uninstall and remove the Hot Spot Shield software.

• Pavilion dv6 LY090UA #ABC: I reinstalled Windows 7 and my wireless network adapter does not work

  I just reinstalled windows 7 and I can not get my work a wireless adapter. I went in all directions looking for drivers to use and everyone I try does not work.

  I tried:

  Atheros Wireless LAN Driver 2011

  I saw someone talking about DriveTheLife in another forum and decided to try it.

  IT WORKS LIKE MAGIC, I don't know how he did it but he found and installed all the drivers I needed!

• Wireless network adapter does not work anymore and will not be repeated work without stopping the computer and then back on.

  Sometimes I leave my computer on at night.  Sometimes I notice that when I get back to him the next day that he has limited connection to the network I use.  When I try to disconnect it from the network, then reconnect, it says that it cannot connect.  Then, when I try to restart my computer it is sitting at a screen saying "stop down". "."  My wireless network software also is unaccessable in which she does not open and if I close the Task Manager and reopen it flashes for a second then closes.

  However when I turn it on manually and then turn it on again, which apparently is not good for the computer, I am once again able to connect to the network with full access.

  Can someone please tell me why this keeps happening and how to fix it?

  original title: unable to connect to a network.

  Hello

  Are you aware of any changes made to the computer, before the show?

  Method 1:

  Step 1: Safe Mode with networking

  Start your computer in safe mode with network and verify that the question.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode with network, then put your computer in a clean boot and search for the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

  Method 2:

  Update the NIC drivers and check the issue.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Method 3:

  Run a virus scan and make sure.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
   
  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  I hope this helps.

• Satellite L50-B-1DZ - wireless network adapter does not work

  So, my network wireless adapter completely stopped working. 2 days ago I couldn't connect to networks wirelessly without problem (although I've disconnected and will need to run the troubleshooter every few hours to reset it...), but yesterday I started to get the message "not connected - no connection is available. In broadcom 802.11n network adapter in Device Manager, the icon has a yellow warning symbol and the error message "this device cannot start. Code 10 ".

  I tried to update the drivers, but it gives just the same error message. I also tried to do a restore of the system since a week ago, but it has not fixed either.

  I found a youtube video that said that the problem can be caused by a software conflict and change value from registry, but that no longer works, and now I'm full of ideas.

  How have you tried to update the driver WLan?
  Have you tried to uninstall the driver first, and then after reboot again to install the new driver downloaded from Toshiba UE driver page?

  Try it!

  You said you reset the system in the past?
  How? Have you used the Toshiba recovery procedure and have you installed already preinstalled system once more?

• WIRELESS ADAPTER WILL NOT WORK UNLESS THE WIRED CONNECTION IS PRESENT

  PROBLEM: RECENTLY SPEND YOUR DESKTOP OF WIN - XP TO WIN 7 32 BIT AND MY HP LAP TOP VISTA 32, WINDOWS 7, 64 BIT.

  WIRELESS LAPTOP ADAPTER, NOT REARRANGE ITSELF TO USE A WIRELESS NETWORK

  CONNECTION. THE ROUTER AND WIRELESS ADAPTER HAVE THE CORRECT INFORMATION CONFIGURATION AND WORK WELL USING THE WIRED NETWORK. WHEN I MOVE THE NIC WIRELESS WI - FI FAILS.

  INFO WIRELESS ROUTER:

  LINKSYS BRAND: WRT300N V1.1
  BASIC WIRELESS SETTINGS: NETWORK RADIO BAND = AUTO, CHANNEL = MIXED MODE = AUTO, SSID = ACTIVE.
  WIRELESS SECURITY = WPA PERSONAL WITH TKIP ENCRYPTION

  WIRELESS ADAPTER, INTEL (R) WIRELESS WIFI LINK 4965AGN

  HP Pavilion DV 9700, WIN 7 64 bit update for Win Vista 32, NVidia Ge Force 8600 m GS graphic card, Win 7 64 bit.

  WHEN I CLICK ON THE ICON TO ACCESS INTERNET AND CLICK ON THE NETWORK TO CONNECT, THE WINDOWS NETWORK DIAGNOSTIC DIALOGUE BOX SHOWS CONNECTED, BUT FAILS TO COMPLETELY MAKE THE CONNECTION. WATCH THEN RESOLVE THE PROBLEMS, WHICH FAILS AND FINALLY TO INVESTIGATE THE PROBLEMS OF ROUTER OR ACCESS POINT...

  OTHER PEOPLE HAVE THIS PROBLEM, WHEN THEY SWITCH TO WIN 7. BUT THERE WAS NO MIRACLE DOCUMENTED THAT I CAN FIND ON THE WEB. IN THE OTHER FORUMS DISCUSS ISSUES RELATED TO THIS PROBLEM CONGREGATE, THEY PROVIDE NO BUGS. I NEED HELP TO SET UP MY WIRELESS NETWORK ADAPTER TO THE RECONFIGURATION OF THE WIRELESS NETWORK.

  Thank you all who responded and have tried to help me. Before posting, I tried most of the mentioned patches, including upgrading my firmware of the router. In addition, I went to Device Manager and scanned for changes and checked the properties under the Advanced tab of the Wifi link adapter. I tried the update driver and deactivation and activation of the device. None of this has worked.

  Finally, I uninstalled and then reinstalled the Wifi card. It worked. I guess the driver software became corrupt and data of the register of the device had probably need re - install, this is what worked. This seems to happen when upgrading Windows operating systems prior to WIN 7 and later people lose their wifi connection. Then this problem develops.

  It worked for me. I hope this works for others with the same problem.

  Once again I thank you all.

• Wireless network adapter will not install on Windows XP Pro-life said a wireless network card is disabled.

  I bought a Skylink® USB 2.0 802.11 g / n Mini adapter with 3dBi antenna wireless network. It will not install on my Windows XP Pro.  Said A WLAN card is disabled.  What?  I don't know what that means.  What can I do?

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

  Also check with Skylink® support site for more information about the issue.

• Wireless network adapter does not work

  I get the error 10 and 31, and it won't let me access the internet

  Hello

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Check the site of the manufacturer of the system for latest driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• My alfa wireless usb adapter does not work and I have no internet connection. How can I solve this problem?

  Dr., Sir, I can't fix my wireless adapter usb [ALFA] Please help me how to fix this, your faithfull, Mr Hameed.

  Hello

  ·        Which is exactly the problem that you are facing with USB adapter?

  ·        You are able to go online?

  ·        Is it detected?

  ·        What operating system is installed on your computer?

  Method 1: Run the network troubleshooter and check if it solves the problem:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2: Follow the suggestions from the link and check if it helps:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 3: Solve Wired and wireless network connection problems in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 4: you can also reset the USB controller and check if it makes a difference:

  a. type devmgmt.msc in the start search box.

  b. expand Bus USB controllers.

  c. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  d. restart the computer and reinstall the USB controllers.

  e. plug the removable USB storage device and perform a test to ensure that the problem is solved.

• S3-391 Acer wireless network adapter does not work after driver update

  Hi, I have an Acer Aspire S3-391 running Windows 7 64 bit and I have recently updated my card (Atheros AR5BMD222) wireless network to the latest version of such 10.0.0.274 as recommended by the Acer site.  After updating the driver, I can no longer connect to my wifi at home.  When I try to connect, I get the message that no wireless connection is available (even if all my other devices can see the wifi network) and when I diagnose the problem, it is said that there might be a problem with the wireless network card and that windows could not automatically bind the ip stack Protocol.  I tried to uninstall the new driver and reinstall one old and running a system restore before installing the new driver, both with no luck.  When I try to manually configure a wireless connection, I get message "an unexpected error has occurred."  I have an automatic DNS and IP address, and when I look at my ipconfig, IP, DNS, DHCP, etc all have addresses.  Any help would be greatly appreciated, thank you.

  And while playing, I managed to fall on a solution.  When I looked at the properties of my wireless network card, I have disabled NetBIOS over TCP/IP and now everything works fine.

• CD\DVD will not work. Vista Home premium, 64-bit. Message says: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  I downloaded the drivers needed from the Dell site and the burner will not work. The computer was again in March 2009. Not sure where the drivers should be located. I downloaded on: win\syswow64\drivers\afc.sys. I've looked everywhere and tried to find a dialog box offering the option "update drivers" for this device. Could not find a way to do except Dell and that doesn't seem to work. The 64-bit system has no 'Device Manager' that I can find. When I look at the properties of the burner, the link to "find a solution" is not highlighted.

  Hello DanHenry,

  Try the miracle solution at this link: http://support.microsoft.com/kb/314060 but before you uninstall all third-party software (example: Nero, Roxio, iTunes). You can reinstall your software after you reboot your system. Please let us know if this helped you. Make it a great day!

  "In the end, the love you take, is equal to the Love You Make"