Drivers HP Pavilion Dv9000 does not. .

I got a Hp Pavilion dv9000 to my uncle, and now, I tried to make it work, since he came, it doesn't have a hard drive so I bought a 500 GB c-door hard drive and it has a 1 GB of RAM. .  and I plan to upgrade to 2 GB and installed Windows 7 ultimate for her. .  then I downloaded all the drivers which was transferred here in hp and intalled it. .  but after the installation.  . the quick buttons and vollume are still not working. .  even the flashing indicators at the bottom left of my laptop is not shining, also no camera and audio.  .

I wonder what I need to do to actually work. .
Please help me

Hello

Check out the Windows 7 upgrade guide on the following link.

http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/Windows-7-upgrade-guide-for-dv6000-DV9000-models/m-p/179816#M27234

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • Pavilion dv9005us does not illuminate

    My Pavilion dv9005us does not light with or without the battery. I held the power to discharge remaining power, then plugged in the ac adapter shows blue light to the decision-making of the laptop, but none of the front lights light up. The motherboard is burned out? Any advice. I just got windows 7 to put on the laptop and unable to start. Bad luck!

    GDH777 wrote:

    Hello and thank you,

    but I had already done all the things that you suggested and your advice was right on point, but the laptop is a 2005 model and in its release cost a fortune, I guess we got our money wrth although I could buy 4 destops for the price of the HP Pavillion dv9005, just want to I could get it to start , with his age, he is not a value of the repair costs.

    But I so appreciated your answer... Viewied much my post but you were the only one to respond, sad for the HP forums. I went else where to get advice and got a lot of instant answers... If the laptop is still under warranty it would not have been a problem. I don't know that this model had a recal on this HP never does the model owners aware of the recall... What a pity so disappointed in HP. I bought a Lenovo y580 a year ago and I doubt that I'll never have problems with support.

    I hate to complain, but still Ty

    Remember, this is a users forum and questions are answered when you can be sure of the answer. I can say, on the one hand, if your system is an AMD-based system in the failures of graphic chipset Nvidia/AMD feared so your Board is most likely won't want to work more. Dv6000 and DV9000 HP have been candidate of choice for these chipset failures unless they have their video chipset fixed or replaced.

  • I have my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it might

    Can I get help with a problem please? my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it. I tried to delete some files, but it wouldn't let me not make a right click on it to remove

    could you please email me at * address email is removed from the privacy *.

    Thank you very much. I hope hear from you soon. Thank you once again :)

    Can I get help with a problem please? my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it. I tried to delete some files, but it wouldn't let me not make a right click on it to remove

    could you please email me at e-mail removed for privacy

    Thank you very much. I hope hear from you soon. Thank you once again :)

    You have a laptop. So try the right button on your touchpad. It work?
    If so, the only remaining possibilities are:
    1. bad mouse. Get a new one.
    2. defective UBS port. Plug the mouse into a different port. See if the right click of the mouse works this time.

    P.S. We do give advice to users via e-mail. All responses must be published and remained in this forum so that others with the same problem will use the answer.
    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • 2 USB ports on the left side of my HP pavilion g6 does not

    2 USB ports on the left side of my HP pavilion g6 does not after I formatted my system, it detects all the devices plugged in these two ports, before operating system was family premium from Windows 7, but now he have professional window 7, what can I do?

    Windows 7 64-bit, install:

    Intel USB 3.0 Host Controller Driver

  • my computer hp laptop Pavilion dv6800 does not illuminate

    My hp Pavilion dv6800 does not illuminate

    Try a hard reset, works sometimes. Disconnect all external devices first.

    battery and power cord 1 / removal

    2 - Press the power button for 30 seconds

    3 reinstall only the power cord for the first start.

    4. turn on

  • 11-n001tu x 360 PC Pavilion: 11-n001tu x 360 HP Pavilion touchscreen does not work after updating drivers

    Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.

    In addition, the HID-Compliant touch screen driver is missing.

    Please help me solve this problem, thank you.

    Hi there @BryanHech,

    Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .

    How you did update the drivers?

    You use Windows Update?

    Have you checked to see if the driver has been disabled?

    Have you tried to run the Troubleshooter in Windows?

    Have you tried to do a hard reset?

    Have you tried a update the BIOS and graphics driver?

    Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?

    Have you tried to Configure the display key?

    Have you tried to activate the driver in touch screen device manager?

    Please follow these steps to see if you can activate the touch screen:

    • Open the Device Manager
    • Find "Human Interface Devices"
    • Expand "Human Interface Devices"
    • Right-click on "touch screen HD compliant."
    • Click 'Activate' (if available)
    • Restart your laptop.

    If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.

    To use the system restore in Windows:

    • Go to the Search
    • Type of Control Panel
    • Click on Control Panel
    • Click System
    • Click on the System Protection
    • Click the System Protection tab
    • Click on System Restore
    • Click Next
    • Choose a restore point
    • Click Next
    • A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
    • Click Yes to confirm

    When the system restore is complete, you'll be up a pop that says that it has been completed.

    Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

    Thank you!

  • HP Pavilion dv6 Notebook PC: Wireless Device on HP Pavilion Dv6 does not!

    Hello! I'll start with my mobile information system (and please excuse my spelling and language because I am very frustrated at the moment and typing this on a cell phone)

    It's a HP Pavilion dv6 Notebook PC with product number - B3K21PA #ABG. Serial number is 2CE2201C96. I have a Broadcom 4313GN 1 x 1 adapter Wi - Fi 802.11b/g/n according to my device manager. I recently chanhed my ISP and the wireless router, they provided is the Linksys E1200 model.

    Now, on the problem - after the use of an extended internet (Skype call or internet games) my laptop just stops giving me access to the internet. And I say it like that because the internet connection icon shows that I have access to the network and internet connection, but none of my software or browsers are able to connect to the internet. This is the first time, she does. I tried updating the driver (both by checking the driver updates and downloading the drivers manually). I also tried system restore and everything I could think off trying to do a factory reset on the whole thing. And I should mention also - although this problem has happened several times now since I changed ISP (and Yes, I called them on this subject too), this currently seems to be permanent, because it has been hours and it still does not.

    Any advice on what may be the problem or that the methods to try to resolve this would be greatly appreciated. I agree to be only moderately enough when it comes to operating a computer that I am not tech savvy kind, but have been using computers for a while now. For now, my current solution is a fall from my window on the 16th floor and see if that fixes anything. I'm not in my own country and the laptop is old a few years for technical support is hard to find.

    I might be sounding a little passive aggressuve and I apologize for that (I have, however, do not deny these circumstances).

    Thank you for reading through my wall of text of nonsense and condescend to help a poor fellow in his time of need.

    Yours sincerely.

    Hello:

    See if this help... driver installation is much more recent than on taking in charge of your computer laptop and driver page.

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_126926_1#tab1

  • Pavilion G6 does not connect to the cellular device

    I have a Pavilion G6 with Windows 7 OS, which is used as a mobile data terminal. I am trying to use my iPhone Verizon 5 c to connect to a hotspot. All my other HP laptops connect to this phone without problem, but the G6 does not connect to the internet via the phone with cable, wifi or bluetooth. The G6 recognizes the phone and shows it in "unspecified devices." I tried everything to get it to connect without success.

    Hey RC800,.

    Thanks for the info.

    I forgot to ask before, can you tell me the exact model specifications what do you use? For more information on the search for your model and product numbers, click here: How can I find my model number or product number?

    If the laptop connects to other devices, we can say that the material is very good. If he does not see the iPhone theres only a few things you can try. The adapter in your laptop is probably 802.11 g capable which is the minimum requirement for the hotspot iPhone, so we can exclude.

    Please, try the following:

    Turn off the power to the adapter:
    1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
    2. expand the network adapters.
    3. right click on the Ethernet adapter / wireless, and then click Properties.
    4. click on the power management tab.
    5 remove the check mark next to allow the computer to turn off this device to save power.
    6. click on OK.
    7 test cycle.

    Reset the TCP/IP settings on your PC:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
    4 restart your PC and test.

    It can also help to reset the winsock catalog:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
    4 restart your PC and test.

    Reinstall the NIC drivers:
    1. download the drivers from here , but do not run them again.
    2. go to your Start menu/screen and type Device Manager.
    3. expand network adapters.
    4. right click on the wireless adapter and choose uninstall.
    5 install the drivers downloaded in step 1.
    6. restart your PC and test.

    Test another iPhone connection:
    Explicit. This will tell us if it's only an incompatibility with a phone or any iPhone hotspot. Try a hotspot Android will help narrow things down as well.

    Let me know if this helps.

  • Windows 7 drivers for Pavilion dv9000

    Hello

    I have a Pavilion dv9076eu laptop, which came with XP was preinstalled. I worked with XP (Pro x 86) for a while, and HP stopped then update its driver, then I moved to Vista (Ultimate x 86).

    Now, I want to upgrade to Windows 7 (x 86, Pro or Ultimate).

    Are there opportunities that Windows 7 drivers released on my machine at any time in the future?

    If this isn't the case, other o/s drivers can be used with 7?

    Thank you

    The specifications may be compatible with Windows 7, but still not supported by HP.  HP does not recommend, but if you decide to upgrade there may be ways to find the drivers you need.  On the one hand, Microsoft has included many more drivers in Windows 7 than in previous versions of operating system. Windows Update may be able to provide what you are looking for.   If it is possible to 'upgrade' and do not do a custom or clean install then you will find that many Vista drivers will work on Windows 7.  And if all else fails, this forum is available.  Making a record of recovery if you have not already.

    Wes

  • Pavilion 15 n096sa: Hp Pavilion Wireless does not work after Windows 10 critical update

    HP laptop Pavilion 15 PC - product number: F4T58EA #ABU - 10 family 64-bit Windows

    Hi all

    I have recently upgraded to windows 10 and had not had any problems until one evening internet dropped out. After a while I realized the wifi adapter did not work. I tried to update the driver, nothing helps. The unit displays under working properly in Device Manager but does not appear in the network connection settings.

    I tried a system restore point that solved the problem but then Windows 10 updates (updated critical around 23 September 15) and wifi no longer works again. I noticed there was recently a couple of new updates of the driver (sp72517), but these have not solved the problem.

    I can still connect to the Internet using a LAN cable, but need help need help I can't easily use a LAN due to the location of routers. I've updated the Hp Wizard and I tried troubleshooting etc but still no joy.

    The elbow of any help would be appreciated gratefully.

    Thanks TT

    Hi all

    I managed to find a solution to this problem online, don't know how or why it worked, but it solved my problem and I hope that it might help others.

    I uninstalled and deleted the files from the wireless driver, then uninstalled Kaperskey and restarted my laptop. Then I went into Device Manager and manually updated the network drivers (think I might have restarted again here) and sucsess hey presto, all that remained to do was to reinstall kaperskey.

    Hope this helps someone else with a problem with wifi Realtek Pavilion.

  • Desktop Pavilion a6750f does not recognize Realtek NIC card in Vista 64

    I have a Pavilion a6750f desktop that had a hard drive failure. I bought a new drive and installed Vista 64, but I can't get internet connection! It does not recognize Realtek RTL 8111 (I think, memory - I'm at work) NETWORK adapter in Device Manager driver, and I can't find the right one!  HP is sending me software on a replacement drive, but I can't wait 5 more days to get. Help, please.

    Your Vista drivers are displayed. First Chipset ATI installation and then the LAN driver_though he says Nvidia which I believe is wrong driver:

    http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2100&LC=en&DLC=en&cc=us&lang=en&product=3872428

    Try > Realtek LAN Driver:

    FTP://ftp.HP.com/pub/softlib/software10/COL27192/PV-67752-1/sp40945.exe

    If no joy remove the 8111C Ethernet driver Realtek:

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  • Hall 13: HP pavilion laptop does not connect to the printer HP envy range 7640

    My laptop does not connect to my HP envy printer. It keeps saying the driver is not available or is it ready, but does not connect. I know the printer is working because I can print from my phone. Anyone know the driver I need to download or what to do?

    Ruizgeraldine

    Hello;

    Let me welcome you on the HP forums!

    I read your post about the problems with your Envy 7640 in Win10 printer and wanted to help.

    The problem is that by default HP print drivers installed by the upgrade of Win10 often do not work.  I have two HP printers and neither one worked after the Win10 upgrade.  We also receive a lot of messages of other people with the same problems.

    I linked the page drivers and software for the Win10 drivers for your printer: http://support.hp.com/us-en/drivers/selfservice/hp-envy-7640-e-all-in-one-printer-series/6617267/model/6617268#Z7_3054ICK0K8UDA0AQC11TA930C7

    You must download and install the full feature software and drivers for the printer.

    Then unplug the printer and install the software.

    Do reconnect the printer until the installation program invited to do so.

    Once the installation is complete, restart.

    You should then be able to use your printer in Win10.

    Good luck

    ========================================================================
    I'm a volunteer and I do not work for, or represent, HP.
    ---------------------------------------------------------------
    Please click on 'Accept as Solution' on the post that solves your problem to help others to find the solution.
    Please click on the symbol of the thumbs-up to the left of the answer key to say thanks fopr my help.
    ========================================================================

  • Pavilion 23tm: 23tm Pavilion touchscreen does not work after upgrade Windows 10

    After the upgrade to Windows 10, my monitor touchscreen Pavilion 23tm lost touch.  I looked for a driver on the HP site and it required me to download the HP Support Assistant application.  In other words, the site would not just download an update to the driver.  After you download HP Support Assistant and running this application, he did not find the Pavilion 23tm monitor, then I hit a dead-end.  I think I just need to be able to download the latest driver, but the HP site will not allow it.

    Hi there @jazzquilt,

    Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are having problems with your touchscreen after that upgrade to Windows 10 and that you have installed the HP Support Assistant for help, but the problem remains. I'm happy to help you.

    The research of the model of the screen, I found a driver Windows 10, below the link. Give it a try, if you have not already.

    HP 23tm LCD Monitor - driver Windows 10

    Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

  • HP Pavilion TouchPad does not?

    Hello, I have the HP Pavilion dm4 2015-dx and this morning when I started my computer the touchpad does not work. I use a mouse and it works fine however. I tried the download Synaptics and followed the instructions but it didn't work. Help!

    Mastiucha,

    Take a look at this document - file mentions the methods used to enable / disable the TouchPad.

    You could jump repeat the reset method.

    Enable / disable the TouchPad

    Click on the star of congratulations !

    It's a big 'thanks' for the author's efforts.

  • Laptop HP Pavilion 2320DX g4: computer hp laptop pavilion g4 does not start successfully after update and return to windows 8.1

    Hi, I have recently updated my laptop to Windows 10. He had so many problems and I didn't like it at all, so I just returned my laptop to Windows 8.1.  Since then, my laptop does not correctly every time, and the fan immediately starts to work as well. I can start my pc and connect to my home screen each time.  If the tile is moving or light up when I move my cursor, then I know that I can use my laptop for a little while. It can freeze after getting out a good program. Other times when I start my laptop, everything is dead except for logging on my screen. My Windows key on the keyboard does not work most of the time.  If the screen does not respond the first time I turn, as described above, I can't absolutely nothing on my pc. I can't access the search bar by moving the cursor to top right, I can't open the tiles, I can't spend in desktop mode, etc.  Front I upgraded to Windows 10 and downgraded to 8.1 all worked perfectly, because I've updated from 8.0 to 8.1 Windows almost 2 years.  I have a defective battery. in fact I can only use my laptop if it is plugged. My fan is constantly going, but I don't know if it's my loss of battery or what's wrong with my pc now.  I have described my problem in the Microsoft community forum but have had little response that was not helpful. I was told to go to the command prompt and put in DISM: scan now (which also contained letters more than that, but I do not remember all). I followed the instructions and for 2 days, my pc seems to do better. Then he returned to this problem again. I hope you can help me.  If you have additional questions, post here or please email me at [removed personal information]. Thank you!

    DEB

    @DWESTDEWITT,

    Hello and thanks for the display on the HP support forum.  What you can do at this point that there are several updates released by microsoft and hardware vendors is running the Windows Update Troubleshooter.

    If this fails to solve the problem.  The only option will be to restore the operating system to the previous, until HP gets the drivers so that they can release them on the support page for your laptop for Windows 10.

    Thanks again for posting and have a great day.

Maybe you are looking for