Drivers not less than or equal error when computer starts.
Original title: error.
Hello. Today, after loging on my desktop, rebooted pc. When the computer reboots. same problem again. I tried to reinstall windows xp, but after copying files and restarting. either it gets stuck before loading windows or give me the blue screen with the drivers not less than or equal, and other warnings on blue screen restart when... tried to replace the drive hard but same problem. P4: 2.60 ghz (it was a celeron 2.0 but it changed on 2 months) 512 MB of ram (that's 256) vga added by me.and the drive restarts several times or turn off... help please
Hi marilym,.
Please write us with the following details so that we can better help you.
(1) what is the exact full error message?
(2) what is the brand and model of your computer?
The issue you described could be because corrupt drivers installed on your computer. Follow the steps in the link given below. The link given below is for DRIVER_IRQL_NOT_LESS_OR_EQUAL errors as well.
Stop error message on a Windows XP-based computer: "STOP 0x000000D1".
http://support.Microsoft.com/kb/916595
I suggest you to provide us with the minidump files so that we can understand the root cause of the problem and help you at best. Follow the instructions in the link below.
Use SkyDrive download collected files and post screen shot/image
Follow the steps in the link, find the question and if the problem persists we write with the minidump files. We will help you to come.
Tags: Windows
Similar Questions
-
error driver irql is not less than or equal
When connecting my computer to the internet via mobile it shows this error
Shivamsingh
These related Netwsw00.sys Intel® Wireless WiFi Link Driver of Intel Corporation. I would like to re - install the latest driver available.
-
Blue screen in Windows 8. Driver IRQL keeps restarting the laptop not less than or equal
Separated from this thread.
Hello
I have the same problem and probably, I know the reason. I have a laptop Asus UX21E (win pro 8.1). the Wi - Fi network that I use is far from my workplace. my laptop can receive the signal very well, but my laptop can not. I tried to use my laptop as a router for internet access on my cell phone so I followed an instruction to make a new virtual network on my laptop. the statement was like these steps:
step 1: open cmd as administrator.
step 2: copy this command and press ENTER: netsh wlan set hostednetwork mode = allow ssid =something key =a number
step 3: copy this command and press ENTER: netsh wlan start hostednetwork
step 4: network share physical adapter Internet access to the new virtual network (under the properties and the sharing tab)
It works very well, but after that this error has occurred several times.
Thanks in advance
Hello
Please contact Microsoft Community.
I would like to know some information about this problem so that we can help you further.
- Are what error you referring? You receive the IRQL_NOT_LESS_OR_EQUAL?
I suggest you try the procedure described in the following Microsoft Help article and check if it helps.
http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors
Warning: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
Warning: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.
If the problem persists, try to install latest NIC drivers, then check if the problem persists.
http://Windows.Microsoft.com/en-us/Windows-8/all-drivers
Just reply to the State of the question, so that we can help fix you this far.
-
Blue Screen of Death: IRQL not less than or equal problem
Hi, I've been BSOD quite frequently recently, which seem to happen randomly while playing games, etc.
Here are the details of the problem given by Windows:
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 18441More information about the problem:
BCCode: a
BCP1: FFFFFA801EDC0010
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF80003590CB6
OS version: 6_1_7601
Service Pack: 1_0
Product: 768_1Files helping to describe the problem:
C:\Windows\Minidump\121714-106845-01.dmp
C:\Users\user\AppData\Local\Temp\WER-273734-0.SysData.XMLA system restore would not work as soon as possible restore the date is already when the blue screen issue started to appear since I do not turn on the system restore function earlier. Need help please, any help would be greatly appreciated. Thanks :)
LINK TO the DMP FILES: https://www.dropbox.com/s/03y5ko27pywc6el/Dmp%20files.zip?dl=0
The debugging session: Fri Dec 19 06:55:48.107 2014 (UTC - 05:00)
FAULTING_IP:
NT! : FNODOBFM: 'string' + 29bba
fffff800'0354581 has 4d8b7d00 mov r15, qword ptr [r13]MM_INTERNAL_CODE: 7
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0 X 50
Nom_processus: mbamservice.ex
CURRENT_IRQL: 0
The debugging session: Fri Dec 19 11:05:07.053 2014 (UTC - 05:00)
Reset the default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0X3B
Nom_processus: nav.exe<==>==>
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from 0000000000000000 to fffff800034adfe5
Stand of my previous recommendations. You have too many security related products installed on your system, and that they cause conflicts resulting in the type of problems you are having.
Each of them, including Malwarebytes, uninstall and install Microsoft Security Essentials.
You can reinstall Malwarebytes, free version, later, after the system has been sufficiently stabilized.
-
Defragmentation stops and cut not less than 52%
In one of my PC, one disc is not defragment. When I do using windows defragmentation option the fragmentation reduced not less than 52%. I tried so many times and face same problem. Then I checked the disc for errors using chkdsk, but found no errors. In this disc, I have 4 disks. But one of the disks is having this problem. Also access the data in this record is now slow. So, how can I defrag and solve the problem?
This is the report of the defrgmentation analyze for the readerIt's the report after defrgmentationHello
Given that the problem is related to Windows server 2003 r2, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:
Let us know if you need help with Windows related issues. We will be happy to help you. -
I get the "invalid personalization information" error when I start my photoshop cs8. I can't find my disc of origin of re - install, but do not have the serial number. Can I download a trial version and then enter my serial number?
If this is the first version of CS, then you will need to check the following. In my view, that it applies to CS also even if it specifies CS2...
Error: Unavailable activation server | CS2, Acrobat 7, hearing 3 - l http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm
-
End date must CLEARLY not less than the start date, else it
Hello
I put DATE of BEGINNING of THE CONTRACT and END of CONTRACT fields on the form. These 2 objects (DateTime objjects), I pulled game tab of the palette and fell on my layout, fine design.
Now, I try to put a validation than the end dat eshould not lower than the beginning, so I had a thread as below from Niall.
and I've done my coding FormCalc to the OUTPUT of the END DATE field as event title below,
Please note that FormCalc
End date must not less than the start date, else CLEAR-Beginvar ACE
var endDateAs = xfa.resolveNode ("CUSTOMER..") RawValue Page31_Contracts.Con_Whole_Page.CON_Basic_Info.CON_START_DATE")
endDate = xfa.resolveNode ("CUSTOMER. Page31_Contracts.Con_Whole_Page.CON_Basic_Info.CON_END_DATE") GLR awValueIf (ACE > endDate) then
xfa.host.messageBox ("end date is less than the departure date! End date is allowed")
xfa.resolveNode (the "CUSTOMER". Page31_Contracts.Con_Whole_Page.CON_Basic_Info.CON_END_DATE") GLR awValue = null
endifEnd date must not less than the start date, else CLEAR-end
I tried to VALIDATE, calculate, change events of END DATE, but nothing works!
Can pls. Let me Kow how I optimize my requirement? I'm anewbie,
Thank you
If you use the exit event, you will likely have the same code on the date fields beginning and end, because they have an addiction to each other. Maybe better try the validate end date event, so that if a field is changed the event is fired. You can try the following to validate the event
// Pls. note this FormCalc // End date should not less than Start date, else CLEAR it - Begin var stDate var endDate stDate = CON_START_DATE.rawValue endDate = $.rawValue if ( HasValue(endDate) ) then if (stDate > endDate) then xfa.host.messageBox("End date is lower than Start date! End date is cleared") $.rawValue = null endif endif 1 // End date should not less than Start date, else CLEAR it - End
-
I get a RunDLL error when I start my computer
Original title: performance DLL
I get a RunDLL error when I start my computer. It happened for 5 days now. The error that says:
There was a problem starting
C:\Users\Nathan\AppData\Local\Temp\AxIndmin.dll
The specified module could not be found
It's a malware. It has been removed from your AntiVirus Scanner and registry entries are always present to start the malicious program at startup.
Start regedit.exe and search (F3 or CTRL + F) for AxIndmin.dll and remove all the entries that you find.
André "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
Error when I start my desktop computer
Dear Sir.
I get this error when I start my desktop PC, please help me solve this. Thank you, Francis Santos
You have a CD/DVD inserted in your computer? The system tries to boot from that.
In addition, you may need to change the boot options to change the order of boot to HARD disk first.
Did you ever open BIOS options.
-
Hi, I have 0xc0000142 error when I start the first pro after the last update, before that I had no problem playing first pro...!
Hello Gene,
You may need to check this: Re: Premiere Pro 2015 won't open after the recent update
Kind regards
Navdeep Pandey
-
Series of strange errors when AE starts
Hello
I get a series of errors when I start AE CC.
I have attached the errors in question below.
No idea what it is related to anyone?
Thank you very much.
Jason
See this:
-
When I start my computer, the first message when I see my desktop is a pop up that says "TVAgent.exe - entry not found.» The procedure entry point not found PowerReadACValues in the dynamic library POWRPROF.dll. "I try to close it and it appears in the same as spot 10 times and then finally I can close it and it will not reappear. I tried a full sweep of the computer with Norton and it did not come with anything. All my programs and all seem to work fine right after, but I fear that there is something wrong. I am running Windows Vista.
Hi Csiew42,
Thank you for visiting Microsoft Answers.
· Which version of Windows Vista is installed on your computer?
· Remember to make changes to the computer recently?
· Who is the manufacturer of your computer?I suggest to perform the clean boot and check if you get the error again. Clean boot will start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135
(1) perform the clean boot (check the link to perform the clean boot).
(2) enable half the services.
(3) determine if the problem comes back.
(4) enable half of the startup items.
(5) determine if the problem comes back.
(6) repeat the steps above until you discover which program or service is causing the problem.
After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.
Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135
Hope the helps of information. Please post back and we do know.
Kind regards
Joel S -
date is not less than the current date.
Hello, I have a form. He has an element called end_date. I want to have the validation of end_date that 'end_date should not less date day'. Advice would be useful.
Thanks in advance.jwellsnh wrote:
Alexander,Dynamic action, execution of JavaScript to do this:
Create a dynamic Action:
Event present before the Page
JavaScript Expression condition
Value$v('P1_END_DATE')<$v('P1_BEGIN_DATE')
In this scenario; P1_BEGIN_DATE will sysdate as default and can be hidden on the page.
Jeff
Published by: jwellsnh on July 19, 2012 09:50
Maybe I'm missing something, but is it just a case of use for a validation? Would be curious to know why you thought of javascript rather than a normal integrated functionality (not designed as a criticism by the way!) - is javascript your first port of call when it comes to APEX?
I would also watch you comparisons to SYSDATE - remember that SYSDATE including right now, so you must consider (perhaps you could make use of the TRUNC function to remove the element of time?). Indeed, javascript did not assess this expression as comparing two dates (I know that Javascript evaluates variables byDuck Typing but it works in practice)?
-
I get the server is running doesn't have error when I tried to open a song or a movie in windows media player... Please advise...
Hello
Method 1
I suggest you to perform the following troubleshooters.Open the troubleshooter in the Windows Media Player library
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-TroubleshooterOpen the troubleshooting Windows Media Player settings Troubleshooter
http://Windows.Microsoft.com/en-pH/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
Method 2
a. Click Start and in the search bar type cmd.exe
b. right-click on cmd.exe and click Run as administrator
(c) in the command prompt, type the following commandnet localgroup "Administrators'"NT Authority\Local Service"/ Add
d. press on enter and restart the computer
Method 3
I suggest you to enable and disable Windows Media Player.Step 1: Disable the Windows Media Player:
a. go to start and in the search type 'Turn Windows has or not'.
b. click on "Turn Windows features on or off".
c. find multimedia and uncheck the brand in the face of Windows Media Player.
d. restart the computer
Step 2: Turn on Windows Media Player:
a. go to start and in the search type 'Turn Windows has or not'.
b. click on "Turn Windows features on or off".
c. find the multimedia functions and place a check mark in front of the Windows Media Player.
d. restart the computer.Turn on or off Windows features
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off -
"DirectX 8.1 do not detected on your system" error when installing a former music software
Original title: "DirectX 8.1 do not detected on your system.
I am trying to install a FORMER music software to use VST plugins on a new Dell XPS 8300 with Windows 7. The "DirectX 8.1 do not detected on your system" error each time. After a thorough research on the internet, a solution of choice has been to change the registry in DirectX parameter to 4.08.01.0810 to "fool" the installation program, but that did not work on the XPS (he is actually worked on a Win 7 Dell laptop that I tried). Any advice? Thanks in advance.
I know this is an old topic, but I thought that if a search engine led * ME * this is probably do to others too.
The right solution is to go to the CAKEWALK site and download the tool, they have created to let people to come out of this problem.
Go here:
Installation of DirectX problems (CAKEWALK.COM)
Or bypass instructions page and download it directly:
Once you unzip the file, run it with the installation disc in your drive.
Maybe you are looking for
-
I want the new watch you
-
HP Stream: Enter the password administrator or power on password
my HP stream (laptop), boots by saying, "Enter password or power on password administrator". \ After failing several times, I get: "System disabled".[85325803]
-
I would like to upgrade my processor i3 in the B520 for an i7 - what model do you recommend?
I have a USA SN XXXXX B520 Check the configuration of my and provide a recommendation for a good i7 processor upgrade. Is that the bios compatible with ivy bridge LGA 1155? Moderator comment: order number removed for the protection of the Member.
-
How to fix the yellow exclaimation mark problem on c-media ac97 audio device?
I installed a new copy of windows XP on my PC. But after the installation of windows, I had the problem of no sound at all. I checked the Device Manager to see what the problem is and found that there is a panel yellow exclaimation on c-media ac97 br
-
X-red on Internet icons indicates that I'm not connected... but of course I am. It started today after "Optimize", "your own records. What happens to cable and wireless. It does not have any problem doing my normal activity (navigation, email, etc.),