Drivers XP VGC-RT150Y

Similar Questions

• Vista Ultimate x 64 Media Center hang during and after the recording program

  I recently bought a Sony VGC-RT150Y.  More information can be obtained here:

  http://www.SonyStyle.com/webapp/WCS/stores/servlet/ProductDisplay?catalogId=10551&StoreID=10151&langid=-1&ProductID=8198552921665507557

  Highlights of material are:

  NVIDIA® GeForce® 9600M GT GPU

  AVerMedia 313 has (analog TV tuner card)

  AVerMedia A317D (digital TV tuner card)

  The unit works Vistax64, Ultimate Edition.  I installed all the updates that are available through Microsoft Update.  And there is no download with Sony indicating that they could help solve the problem I have.

  The problem is that the computer hangs sporadically after that it registers a program.  After a night of record unattended, the unit is on and does not respond to the keyboard.  The display is blank or frozen.  The computer is connected via a wired network.  I try clicking of the camera and it does not.

  Sometimes programs are saved in their entirety.   Sometimes programs are truncated.

  When I try to get more information via the monitor of performance & reliability, all I get is "stop disruptive."  When I go into the control panel "Report Problems", there is no reported problems.  History of recording program in Media Center lists only one generic error indicating power has been disrupted or the system was not available.  I know that there is no power failure, because I have a NAS connected to an inverter and there is no paper power failure.

  I reported the problem to Sony.  They sent a technician to replace the power supply and the motherboard.  Still no change.

  Defective equipment could only be a TV tuner or the RAM.  All other material was traded through the exchange of motherboard.

  I'm now back to thinking it's a software problem.  Any ideas on how to start this chasing?

  After having poking around on the forums and a little thought, here's what I'll try:

  1. play with the power settings to ensure that the unit never sleeps.  I want to see if the problem is with MCE or power management.

  2. try 'analog' instead of digital recording.  I'm mainly recording clear QAM channels.

  I'd be open to other suggestions that you (all) may have to try to understand this.

  Hi Claude,.
   
  Thank you for writing to Microsoft answers Community Forums.
   
  Re-run the installation of Windows Media Center and check if it crashes while recording. To do this, follow these steps:
   
  1 start Windows Media Center.
  2. click tasks, and then click settings.
  3. click TV, and then click Set Up TV Signal.
  4. When you are notified that changing TV signal settings will interrupt recording, click Yes.
  5. on the Set Up Your TV Signal screen, click Next.
  6. check that the correct area is selected, click Yes, this region to configure TV services and then click Next.
  7. click on configure my TV signal automatically and then click Next.
  8. check that the TV signal configuration settings are correct, click Yes, and then click Next.
  9. click on lists Guide Setup and then click Next twice.
  10. in the privacy of the Guide screen, click Yes, and then click Next.
  11. If you agree to the terms of use of the Guide, click on I agree, and then click Next.
  Note to continue, you must click on I agree to accept the terms of use of the Guide.
  12. click on manual download and then click Next twice.
  13. When you are prompted, type your ZIP Code or the Postal Code, and then click Next.
  14. If you are prompted, verify your signal provider, and then click Next.
  Note After Windows Media Center Download the Guide, the Internet connection is no longer necessary.
  15. follow the remaining steps to complete the installation. You may have to restart Windows Media Center.

  If the problem persists, reply came back with the following details:
  1. Since when are you facing this problem?
  2. is it works much earlier?
  3. have you made changes recently, until this problem occurred?
  4 display error messages that are recorded in the event log and let us know if you find errors.
  To view the event viewer:
  -Click Start, in the start search box tpe eventvwr.msc, and then on enter.
  -Select the Application's entry in the left pane
  -In the right pane, locate the entry for preceded a red X error
   
  It will be useful.
   
  Kind regards

  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• VGC-LT38CE windows 7 drivers

  I have upgraded to Windows 7 from Vista:
  I need to re - install the driver from the monitor on the VGC-LT38CE.
  I downloaded the new version of Nvidia but was not able to install.
  Help, please.

  Thank you for your post and welcome to the forum.

  Windows 7 drivers are not available for this model, but you can have success installing the Vista driver in compatibility mode:

  http://eSupport.Sony.com/CA/Perl/SWU-do... roup_id = 10

• Windows on hardware drivers from Bootcamp

  Hello

  When Windows 7 is finally installed, it seems as it lacks the network drivers and therefore it is impossible to get online. Is there something I can do to get the drivers advancing him?

  Thank you

  Download your year/model Mac-specific drivers to install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support and run setup.exe from the folder of side Windows boot camp.

• Big problem in the finder then the copy of the file trought different drivers

  For my work, I download and archive about 100 GB of photos every time.

  After upgrading to Mac OS sierra I meet big difficult.

  1 copy a lot of files require a lot of time more instead of last osx (about 4-5 times more)

  2 - from multiple instances of copy beginning with a lot of delay (approximately 5-6 minutes after the control drag & drop or copy/paste)

  3 - once the completed instance disappear and always with "0 file to the end" for a long time (about half the time of the copy) and in any case until all istances have been terminated

  4 - after all: not all the files are copied (the last time about 300 files are lost in a total of 4000)

  before all the reactions:

  -all my system works perfectly before the sierra of macos

  -all my drivers are fully working (tested in ather Mac without sierra)

  -a speedtest with the blackmagik tool say that the system can still run at full speed

  -If a script third spear the copy no problem

  that: in my experience, the question is on sierra finder.

  clearly, I can't work with this type of system, that:

  When apple will fix problem of che?

  How can I return to osx than el capitan without lost my documents and applications?

  Thank you

  > How can I return to osx el capitan without lost my documents and applications?

  This link is for El Capitan, but it also applies to the Sierra:

  OS X El Capitan: revert to a previous version of OS X

• Intel graphics drivers

  Then I looked around my graphic driver updates and I don't really know where to go.

  The Intel Web site has NONE of the Mac (proof https://downloadcenter.intel.com/product/80939/Graphics-Drivers) compatible graphics drivers, and is the Intel Windows drivers update utility only.

  First question; If the Mac comes with so many Intel drivers, why does it seem like Intel does not give a shit about us?
  Second question; How to upgrade my drivers?

  Are equipped with all the necessary drivers for the graphics units Intel Mac Minis running OSX / integral with the OSX provided by Apple. No additional drivers/updates are available except an OSX update or update OSX

• anniversary 10 Windows update breaks the bootcamp drivers

  I bought the home edition of windows 10 must be installed with bootcamp on my Mac Pro (latest version).

  After a few seconds the bootcamp drivers installation, I get a blue screen saying "kernel Security Check Failure. I tried to re-parititon and re - install windows with bootcamp 10 several times and the results are the same. I found an earlier version of windows 10 online and when I tried to install it, the problem goes away. but then when I update this old windows 10 with the update of the anniversary, the problem appears again. so I guess that the problem is related to that! in safe mode I get no blue screens. today I intend to try to uninstall the driver of each training camp in a tower, until I tell me what is the cause of blue screen. so far, I removed the graphics drivers, but the results are the same.

  If anyone can provide all the information on how to study this issue further away, or maybe even solve it, I'll appreciate it more! Thank you

  My Sepcs are:

  Graphics card: Dual AMD over-pants D300

  Processor: Intel Xeon E5 1620 v2

  Memory: 12GB DDR3

  I suggest you that stay with the working version. Please see Re: Windows 10 anniversary + Boot Camp = Assembly is more Mac partition for more details.

• Willl it be bootcamp drivers to work with macos sierra today?

  Hi, can I switch to sierra os today without losing the bootcamp? Are there drivers available today or do I have to reinstall windows 10? Thanks in advance, eldormilon

  Usually when Apple updates of OS X, it includes updates of Boot Camp, which is part of the OS X. Make sure have a good backup or clone of your partition OS X and your Boot Camp partition. Of course, nothing is perfect, so problems can occur.

• Problem drivers 5.0 HP printers Officejet 4500 G510n-z

  Hello

  updated drivers HP 5.0 from August 30. 2016

  Since then attempt to use the results of scan in "waiting for scanner ' for the ages or error of-9923. (This Officejet 4500 is a wifi printer)

  Generally, I use an extract and import from a scanner in the menu file, in which the printer is visible.

  Removal and reinstallation of the HP printer has not solved the problem.

  Did you notice similar behavior?

  Greetings to all.

  Same here :-( I had to buy a cable USB A to B USB to connect the printer/scanner directly on the Macbook, at least that, it works... always looking for a way to bring my analysis via WLAN...

• Last updated: El Capitan made Nvidia drivers not compatible

  I have the 346.03.15f02 latest drivers Nvidia Web installed and everything was going along great last El Capitan 10.11.6 running.

  Last updated 09/01/2016 security has been applied with success and after seeing a few graphical anomalies during the boot sequence made me know something was wrong, I saw a message saying that OS X uses OS X default drivers.

  I went into the preferences of the Manager of Nvidia drivers and Nvidia is now incompatible.

  Is it possible to do this backward? I just created this model, so I did not set up, still time Machine...

  Sorry, but do not treat us non-Apple drivers. Ask Nvidia or look for a pilot updated on their website. OS X contains all the relevant drivers for all GPU compatible, Apple supports.

• Windows 10 can not boot after installing the Bootcamp drivers

  I have an iMac late 2013 (21.5 "), and I just got 10 Windows so that I can install it using bootcamp. I spent a good part of two days trying to get Windows to work with installing bootcamp, but no matter what I do, the result is always the same. If I let bootcamp install its driver (as he wants when you start first in 10 Windows after installation), Windows will crash before loading fully at the next startup. He comes to see the windows logo pop up with the loading circle spinning around for a second, until what the circle all the sudden stops. After that, it restarts and I hear the iMac from sounds (this much quieter time for some reason any) and then it does the same thing. The third time that it restarts, it starts the automatic recovery mode and I get caught for the advanced boot menu. After letting Windows reinstall itself, it works fine except that it lacks some of the display driver (I can't adjust the brightness) and I also can not use the function keys on my apple keyboard, or the magic mouse at all.

  I tried to reinstall OS X El Capitan and then repeat the installation for Windows. I tried with the driver OS X Downloads for me in Bootcamp (version 6.0), and I've also tried using those newer that Apple offers for download on their site (Version 5.1.5769). All attempts of the result of facilities Bootcamp in crash of boot even when Windows is restarted.

  Windows is still usable, I just think it would work as it is supposed for a Mac wish. Why the bootcamp drivers break 10 windows? Has anyone else had a similar problem? If so, any suggestions?

  Thank you

  BC 6.x drivers are more recent and recommended for Windows 10 models 2013 and following.

  BC 5.x drivers are older and meant for W7/W8.1. Specifically, in your case, 5.1.5769 are not valid drivers for your model. iMac 21.5 inch 2013 requires such Software in Support of Boot Camp 5.1.5640 indicated in the installation of Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .

  Publication date: February 11, 2014

  File size: 925,6 MB

  The system configuration required

  • MacBook Air (11 inches and 13 inches, beginning 2014)
  • MacBook Pro (retina, 13 inch and 15 inch, mid-2014)
  • MacBook Air (11 inches and 13 inches, mid 2013)
  • MacBook Pro (retina, 13 inch and 15 inch, end of 2013)
  • Mac Pro (end 2013)
  • iMac (21.5 inches and 27 inches, end of 2013)
  • Windows 7, Windows 8 and 8.1 of Windows, 64-bit

  It is not a problem of drivers BC. W10 requires updates that it shouldn't. Please see Windows crashing in 10, but know not why. as reference. I suggest that you follow the steps described in the linked discussion and test.

• Windows restart as soon as try to update drivers in windows on mac pro Book 10

  Hello

  After so much hassle to install windows on my mac 10, some of the features such as graphic and sound card do not work, I try to install the driver using bootcamp, however, they are not compatible with windows 10, and then I try to download driver manufacturers, such as the intel and amd, however, as soon as I try to update the driver windows will restart. does anyone have a solution?

  You have an identical question in windows restart as soon as try to update the drivers in windows 10 mac pro book .

  What is the model of the year of your Mac?

• Are there drivers for HP LaserJet Pro M402dn?

  I just got this printer delivered.  When I installed it on my Mac, I saw that there is only a generic printer driver.  This means that not only the print control is poor but also that I can't update the firmware (according to the user's Guide).  Apparently, there is none on the Apple site.  Does anyone know if there is?    Thank you.  Bill (OS 10.11.6)

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=7458633 & swLangOid = 8 & swEnvOid = 4193

  HP v3.1 for OS X printer drivers

• Intel or Apple in BootCamp graphics drivers?

  Like more of a thing of general interest in all-in game on Windows 10 (BootCamp) on a MacBook Pro late 2013.

  Using chipsets Intel Iris (HD 5100), you would get better game performance using the bundled drivers display certified by Apple or the latest drivers straight from Intel? My little finger would say Intel and I'm currently download the latest drivers, but I'd like to have an outside opinion before I commit.

  Any comments?

  Create a restore point in Windows system with the Apple/BC driver. Update for Intel driver. Restore Intel drivers, if you have problems.

• I just upgraded to logic 10.2.4 and now it does not recognize my controller - Yamaha P-95. Yamaha has no new drivers yet. Any suggestions?

  I just upgraded to logic 10.2.4 (and 10.11.16) and El Capitan now logical does not recognize my controller - Yamaha P-95. Yamaha has no new drivers yet. RELOADED drivers available and tried different USB ports. The audio works fine. Any suggestions?

  you need to ask Yamaha if they have a work-around or they intend to release the pilots, have a beta driver or what is their recommendation.

  If the logic is compatible with the operating system then the problem is with the 3rd party controller, and the developer will have to answer it. Past that if you have a backup time machine an instance where worked together your controller, the software and the operating system you can restore to that point

  Use Time Machine to back up or restore your Mac - Apple Support