Droid Bionic: screen suddenly stopped auto-turning

Similar Questions

• 2610 suddenly stopped to turn off ink

  Hello

  My 2610 all in one suddenly stopped to turn off ink.  The day before, it was working fine, then when I turned on the next day, he goes through the same motions, but no ink comes out.  I print in black only.

  Thanks for any help

  HI - go ahead and try following the steps described in this document.  It guides you through printing the diagnostic page should help pinpoint the problem.  If you see no black on the diagnostic page, it could be that the cartridge is empty or the nozzles are clogged.  To try to solve the problem with clogged nozzles, try the procedure described in this document.  If this does not resolve the problem, you will probably have to replace the cartridge (this is of course assuming you see no black on the diagnostic page.

  Hope that helps.

• MG6220 with connection Wi - Fi suddenly stopped auto scan.

  MG6220 has suddenly stopped scanning.  It was recently changed to wireless connection, but it has scanned since this change.  It prints very well.

  Hi again Tunia,

  You can try to reinstall the drivers and software of digitization of the printer using the latest drivers from the site Web of Canon USA try and solve the problem.  Please click here to access the page drivers and downloads for the PIXMA MG6220. Once on the page, follow these steps:

  1. check that the operating system detected in the "OPERATING SYSTEM" field is correct, and if this isn't the case, please click on the drop down menu to select your operating system. Please note that you may need to scroll upwards or downwards in the list to select your operating system.

  2 under the red box marked "RECOMMENDED DOWNLOADS", please locate the "MINI MASTER SETUP", then click on the SELECT button to the right of the file name. When you do, a dark gray DOWNLOAD button appears; below, a CheckBox appears asking you to accept the terms of the waiver to continue the download. Please click on this box to accept the terms. When you do, the dark gray DOWNLOAD button lights in red. Please click on the button DOWNLOAD now Red; the file will start downloading. The time for the download process can vary depending on the speed of your Internet connection and the size of the file being downloaded.

  3. Once you have downloaded the INSTALLATION of MINI MASTER file, please download the MP NAVIGATOR software for the printer from the SOFTWARE section of the Web page.

  4. once all items have been downloaded, please temporarily disable any antivirus or firewall software on your computer and then double-click on the downloaded file and follow the prompts to install the printer and software on your computer. Please, start with the INSTALLATION of MINI MASTER file. The reason why we have you temporarily disable the protection software is because it sometimes prevents the printer is detected and installed successfully. Once the printer and the software are installed successfully, the software protection can be reactivated.

  Once the drivers and scanning software have been brought, try again to start a new search.

  I hope this helps!

• Satellite A100-796 screen suddenly flips & occasionally turns black.

  9 months ago, I bought my laptop (Satellite A100-796).
  Since a week ago, the screen flickers from time to time very fast (for like a second). What's worse, the screen came to turn completely black twice suddenly while he was studying. It seems that the computer was still active, but the screen went black still (on the power but in black only). The only solution was to press the power button for like 10 seconds to stop the computer laptop everything.

  I have installed new software, so I don't really know if it of a hardware problem or not? Everyone recognizes these symptoms, or you can give me any advice? I always had a pick-up-and-return-guarantee, do I have to use this right now or is there a quicker and better solution?

  I really hope that someone can guide me through this, given that the laptop is very precious to me.

  Kind regards

  Liem

  We should read about some facts. The fact is that this issue must be linked to a hardware malfunction.
  Kody said the FL inverter could be faulty, but I think that the internal display could also causes this issue

  There is only one real way of this knowledge. The parts must be checked!

  So contact the ASP in your country and ask for verification of the laptop.

  Best regards

• Iconia Tab 8 W1-810 W suddenly stopped the automatic screen rotation

  Hello.

  I m havving problems with my Iconia Tab 8 W W1 - 810. He suddenly stopped the automatic rotation of screen and now I can´t find the box "Enable rotation of the screen. I have only the chance to put in landscape or portrait, but not in automatic rotation.

  How can I enable automatic screen rotation again?

  I would much appreciate your help.

  Thank you, Justin!

  I tried this, but as I no longer had an automatic rotation checkbox, I couldn t solve the problem.

  The solution came through the cat of Acer service. Acer technician Mukesh was very nice and patient, we tried all possible options, but the auto-rotation option was not available, the only way to recover is to install the proposed pilots:

  http://global-download.Acer.com/GDFiles/driver/platform%20Drivers/platform%20Drivers_Intel_10.18.10...

  After installing these drivers, I got automatic rotation check box and could solve the problem.

  I am very happy that I could solve the problem and very happy with the Acer´s customer service.

  Thanks for your suggestion.

  Kind regards

  Maria Ines.

• detected external display suddenly stopped working - displays black screen

  original title: detected external display suddenly stopped working

  Hello

  I have searched in several forums, but have not been able to completely solve this problem.  It has been set provisionally and has not yet.
  This system I have:
  HP TouchSmart tx2 tablet pc with Windows Vista Service Pack 2 x 64-bit (Home Premium)
  AMD Turion (tm) X 2 Ultra Dual-Core Mobile ZM - 82, 2.2 GHz
  ATI Radeon HD 3200 graphics card
  I have been working for more than a year with a monitor flat screen Dell ST2310 external monitor and works very well with the setting "use external display only.  From one minute to the next two screen went black so I forced a restart and again the same problem.  I decided to manually disconnect the external monitor by unplugging the VGA cable from the laptop that turns on automatically to the main display as it would if I am disconnected display.  When I connected the VGA cable again the same question in the two screens were entirely black.  I unplugged once more the VGA cable if I could change the settings in Windows mobility.  I plugged back in the VGA cable after changing the settings of "external display only" to 'mirror' devices and after playing for a bit, with the Windows Mobility Center, I had the external display to work again my regular settings: "external display only.  This solution lasted a day and now works in the main screen and the external screen is completely black.
  I tried in vain to solutions:
  -Change VGA cables continues to experience the same issue.

  -Tested according to the specifications and Dell monitor Monitor works fine if the backlight is not the problem.
  -Records update for ATI Radeon HD 3200 graphics card and driver generic PnP Monitor and Dell ST2310.
  -Uninstalled ATI Catalyst Manager and re install now as AMD Vision Engine Control Center.
  -Checked AMD Vision Engine Control Center recognizes the connected external display.
  -Uninstalled the driver Dell ST2310 and re installed the driver.
  -On the screen settings have tried to extend the desktop on the external screen (second)
  Now, this is what's going on and don't know how to fix it:

  -Windows Mobility Center detects a monitor external, even when the VGA cable is disconnected.

  -When it detects the external display it sometimes detects it as DELL ST2310, sometimes as a generic Non - PnP monitor.

  -Sometimes under "Monitor" in the Device Manager, there are several monitors generic Non - PnP contained also the Dell ST2310 and generic PnP monitor.

  -When the external monitor is connected, the screen is completely black and does not work even after changing the settings Windows Mobility or Fn F4.
  Help!

  Hello
   
  I also suggest you to update the BIOS. Visit the manufacturer for more information.
  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions
   
  WARNING:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
   
  See also: http://h10010.www1.hp.com/ewfrf/wc/document?docname=c01881110&tmp_track_link=ot_recdoc/c00678157/en_us/c01881110/loc:4 & cc = us & dlc = en & lc = en & product = 352607 #N624
   
  Thank you

• HOW IS IT MY MOUSE JUMPS AROUND ON THE SCREEN, OR STOP SUDDENLY

  my mouse jumps all over the screen, and it suddenly stops moving.

  Test your mouse on another PC. If the problem persists, the mouse is defective.

  Test another (known working) mouse on your PC, if the fault persists your PC is faulty somehow.

  It's a mouse laser (light rather than a rolling ball works)? If it is try different a surface or a mouse pad. Some surfaces, e.g. mouse pads and mousepad hologram photo will lead crazy optical mice.

  If it is a bearing ball mouse, clean the rollers inside.

  It is USB, PS/2 or series? Wired or wireless? Check the battery if wireless.

  TRicky

• Windows 7 screen saver has suddenly stopped working

  Recently, the screen saver on my laptop (Sony Vaio Z model VPCZ119GX with 6 GB of ram and a core i7 processor) has stopped working.  He has always worked in the past, but suddenly (as of mid-June 2010) stopped it.  None of the Windows 7 default screensavers work (for example to mystify, ribbons, etc.), nor fact Windows live Gallery screen saver.

  I am running Windows 7 Professional x 64.  If I go to preview, I can see the screen saver, but it does not start after a period of inactivity.  I reduced the timeout to 1 minute and I tried both require a password and no password and neither work.  I do not use a wireless mouse (I have read other posts that a mouse without a wire could cause this problem) and I have fixed via the USB port.  I went in the Manager of peripheral and done so that devices that have power management options have been disabled.  I checked my task manager and I don't notice anything out of the norm running in background.

  Here's the interesting part.  If I connect to the hidden administrator account screen saver works perfectly.  If I create a new user account screen saver still does not work.  Something prevents the screen saver works in the created user accounts, but works perfectly under the administrator account.  What could cause this problem?  How to solve this problem?

  Another interesting information.  The same problem exists on a friends Lenovo T400s under Windows 7 Ultimate.  His screen saver has worked a few days ago (week of June 21) but suddenly stopped as well.  A windows update may have caused this problem?

  Finally, I have not tested this, but it seems that hibernate/sleep has also stopped working.  Unfortunately, I sleep/hibernation activate after 4 or 5 hours and I can't say for sure 100% that I let the computer idle for this period of time, but I could have sworn that I have.

  I think screensaver and put into hibernation / sleep are all affected by the activities of intelligence and something is causing the machine to think that this is not idle.  But under the Admin account, it works very well.  I spent hours trying to understand this point, but without success.  I have even restored to the point of thinking older restoration that something could happen, but it does not solve the problem either.

  Help, please!

  Brian

  briboynyc and dougfulcher

  I am so happy that I found this forum.  About 6 weeks ago, I lost my screen saver on our computer brand new with windows 7.  I was on the phone with HP in India twice and finally they decided to take back me to the factory restore thinking that it was because of our backup files in windows XP.  Repeat all. I backed up all my files, and then we started again from the beginning.  It's the same thing.  We packed up the computer and returned to the store, a new computer and started all over for the third time.  Last night is the same thing.  I was really frustrated and thought maybe it was a little problem with windows 7 so decided to get on the microsoft Web site to see if I could communicate with someone from Microsoft.  That's when I discovered this forum and started reading everything.  When I read the answer of dougfulcher, he mentioned magic jack running in the background.  We disconnected magic jack and that solved the problem immediately.  I am really grateful and only wish I had discovered it before that I lived all this computer return and restoration.  Everything seems to work very well.  I hope this helps someone else.

• My Canon MX700 has suddenly stopped printing unless I turn it on and turn it on again each time. I use a new Windows 7

  My Canon MX700 has suddenly stopped printing unless I turn it on and turn it on again each time.  I use a new Windows 7.  Any ideas?

  Thank you, schasof

  Hello

  Maybe you can use "System Restore":

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  and the date when to use your printer worked OK.

  LC

• BlackBerry smartphone Email through Bridge suddenly stopped working - flashing black and white screen only

  Used email Bb bridge successfully for about a month since the purchase of the playbook. Then halfway through sending an e-mail response, the screen suddenly started flashing black and white. All bridge applications work perfectly, that e-mail is on BB Curve 9300.

  Tried all the solutions I can find it is similar on the forums, including delete 9300 battery, bridge etc., making the RST, re-installing but no solution.

  It was the main reason that I bought the playbook, so pretty useless.

  Any ideas how to behave?

  After trying all the options for similar problems listed in the forums without success, I finally found the security reset to factory settings PB sort the problem, at the expense of the loss of various data and downloads.

  Fortunately all relatively easy to recover from other sources, just in time.

  I hope this helps if someone else gets the same question.

• Hello.   Recently my home PC suddenly stopped working. If I was not able to uninstall beforehand. You guys can remove it so that I can install on my new computer.   Turn Cs and adobe aftereffects. And I work for the IGT Australia.   Regards Dave Sp

  Hi.

  Recently my home PC suddenly stopped working. If I was not able to uninstall beforehand. You guys he write off so that I can re install on my new computer.

  Running Cs and adobe aftereffects. And I work for the IGT Australia.

  Concerning

  Dave Spencer

  
  

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations

  -only Adobe can help with serial number problems, nobody here can access the activation server

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 clouds can help

  -read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

  -or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

  PS - I like IGT games

• I stop using the computer for a few minutes. Then the screen of the computer turns off. Its does not sleep I need to turn off the computer then put into market and re - turn on the computer.

  If I have not used the computer for a few minutes then the screen of the computer turns off. The computer is not sleep. I tried to use the space bar to wake him but he won't answer.  I have to turn off the computer. Then turn on the computer. This has happened for 2 months. I have a Dell DM051, 446 GB HDD with 329 free GB, 2 GB RAM, Intel (r) Pentium (r) CPU 2.80 GHz, ASUS A7 Series 240 and Windows 8 Pro graphics. I replaced the graphics card because I thought that this could be the problem, but it wasn't. I need to replace to fix this? Thanks for your help.

  You have disabled things like Hibernate and hybrid sleep, etc. on the power options screen in Windows?

  Have you checked the USB settings in the Device Manager? Search tab power management for each listed root USB hub and uncheck the box "allow the computer to turn off this device...". »

  And do the same for entries under Human Interface Devices (HID) device as Manager.

  Then restart...

• resolution 2560 x 1440 has suddenly stopped working. 1080 p now the max option available

  I have 2010 macbook pro (el capitan) and ASUS H257HU monitor that supports the resolution 2560 x 1440. Until yesterday, I was able to get the full resolution, but suddenly it has stopped working and the max resolution I could get was 1080 p.

  I tried to reset the smc and NVRAM, but that did not help.

  In safe mode, I followed the suggestion of apple and was able to get resolution of 2560. But it reboots the machine back to 1080 p. Hold down the option key and clicking on the option scale does not display any resolution above 1080 p.

  I've tried searching and following some recommendations, but no permits.

  Restart the computer and enter views sometimes give 2560 option, but clicking on it makes the screen turns blue and then it always comes back to 1080 p, with no options available in the dialog on the scale. The System Preferences dialog box hangs for a few seconds.

  Someone at - he fell on the same issue and found a solution. I don't know why he suddenly stops working, while still being able to work in safe mode but not in normal condition. I tried to remove the profiles as well.

  With bootcamp (win 7), the display works fine with 2560 x 1440.

  The connector I use is screen Mini DisplayPort.

  All proposals/solutions will be very well received.

  Hello there, moths.

  It seems that you are having problems to select the resolution you want on your external display from ASUS. Great job with the troubleshooting, you've done so far. The following Knowledge Base article offers strong information to look over and review, as well as links to some additional troubleshooting content:

  Get help with graphical problems on external displays connected to your Mac.

  Before you start

  You can solve many problems of display by updating the software on your Apple devices, cables and adapters. If you see an image on your screen, look for the software updates using the Mac App Store:

  1. Connect your external display and Apple video cables or cards that you use with it.
  2. In the Apple menu, click App Store.
  3. Click updates in the window of the App Store.
  4. Install OS X updates or firmware are listed.

  If you use a display, hub, extenders or adapter not made by Apple, check with the manufacturer for updates that might be available.

  If you try to connect a screen 4 K or Ultra HD TV with your Mac, make sure that your computer meets the requirements for the use of these external displays.

  If your firmware and software are up to date, or if you don't see the image on your screen, try the steps below for your specific problem.

  {...}

  Check the connections

  Check the connections on your Mac and external screens:

  • If you use an Apple laptop computer, try to connect the AC adapter.
  • Make sure that the power cable from the external display is connected correctly and that your display is enabled.
  • If you are using a Mac Pro (end of 2013), make sure that your screens are plugged into the right ports.
  • If you use a hub of display, Cabinet or "KVM", try to connect the video cable from your screen directly to your Mac instead.
  • Unplug the video cable where it plugs into your Mac, then reconnect to reinsert the connection.
  • If you are using a video card, unplug the video adapter on your Mac, then reconnect to reinsert the connection.
  • If you use multiple video cards to connect your screen (the cards are "chained"), testing connection of the screen by using a single adapter if possible. Some video cards may not be linked together. For example, a mini DisplayPort to DVI adapter may not be connected to an adapter DVI to HDMI.
  • If your screen has more than one video connection, see if you are using another connection on the display works. If possible, check if you use a different view or a different adapter works.
  • Try using another cable that you know to be in working condition. Check with the manufacturer of the screen to make sure that you use the cable they recommend.

  Detect your display

  If you use an external monitor, sleep and wake your Mac to check for connected screens:

  1. Press the power button on your computer to standby, or choose the Apple menu > sleep.
  2. Wait a few moments, and then press a key on your keyboard or click your mouse or trackpad to wake up your Mac.

  If you use more than one screen, and you can see the image on one of the screens, you can also use the preferences monitors to check the connected screens.
  

  Adjust video settings

  If there is no image on the screen, try adjusting the brightness or contrast of the screen. If there is still no picture or image appears torn, or scrambled, try selecting a different video resolution in system preferences. Adjust brightness

  • If you use an Apple Display Monitor, press the key to increase brightness your Apple keyboard. To adjust the brightness of a secondary screen, press Control + F2.
  • If you use a view that is not made by Apple, see the documentation that came with your monitor to see if it includes built-in controls to adjust the brightness or contrast.

  Change your display resolution

  1. In the Apple menu, choose System Preferences.
  2. Click the display icon.
  3. Click default for display. If you see more than one resolution listed, choose a resolution and refresh rate. If the display turns off when you change resolutions, press the ESC key to cancel the change.
     

  If you can not change the resolution of your screen because you see no image, restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  Search for software third display

  If your monitor only works when your Mac is started in safe mode, and related to the software display is installed, check with the developer of the software for updates, or try to uninstall temporarily.

  {...}

  Get more help

  If you have tried these steps and your screen still does not work, contact the Apple support for more help.

  Thank you for being a part of the communities of Apple Support.

  See you soon.

• HP Pavilion dm1-4000au Entertainment Notebook PC_Keyboard and Touchpad suddenly stopped working

  Hello

  I have a HP Pavilion dm1-4000au Entertainment Notebook PC (QG411PA) running Windows 7 ultimate 32-bit for more than two years already. During these periods so far, whenever my laptop is idle for an hour or two, the keyboard and the touchpad suddenly stops working, without worrying if his operation on battery or AC.

  I always ensure that I have an external mouse in order for me to navigate correctly and pull up the screen keyboard to type when this issue arises.

  Everything seems to be updated regarding the Windows updates and I even reformatted, but issue persists.

  What point particular I feel a harware problem? Maybe a software problem? Or maybe a defective model?

  Your prompt response is much appreciated.

  Sincerely,

  Led

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  Looks like you are facing difficulties to solve problems with your laptop Touchpad

  We will surely help you with this

  Steps to drain the static charge and load the BIOS default settings to solve the problem

  Step 01. Turn off the laptop

  Step 02. Disconnect the power/AC adapter and also remove the battery too

  Step 03. Press and hold the power button of the laptop for a minute

  Step 04. Now re - insert the battery back in and plug again the power supply/adapter

  Step 05. Start Notepad and keep pressing the F10 key during startup to access the BIOS

  Step 06. Once you get the BIOS, please press F5 or F9 key to load the default settings for the BIOS

  Step 07. Now press ESC/ESC. Save Changes and Exit - Yes

  Step 08. Now, please wait until the unit load the Windows operating system

  Now please download and reinstall the drivers from the touchpad for your laptop on the Site of HP Support

  Please click on this link to find several troubleshooting steps to solve this problem

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• 6457 - Lenovo T61p has suddenly stopped working!

  My Lenovo T61p 6457 has suddenly stopped working.

  When I turn it on I see the power and drive green lights HARD turns on and since another computer on my network I can access individual files on the hard drive the T61p.

  However when I connect the T61p via a VGA cable for an external monitor to work I don't see Windows or images on the screen!

  Do you think it is just a problem with the screen or is there something else?

  The screen currently installed on the T61p 6457 is WSXGA 1680 x 1050 (Samsung LTN154P2-LO5).

  I found a job WUXGA 1920 x 1200 with inverter and cable in the box of original case Lenovo T61p high - that will work in my T61p?