Droid Turbo could not connect the Cisco access point

Similar Questions

• After running Thinkvantage System Update, unable to connect the wireless access point

  I've recently performed Thinkvantage System update for updating various programs/drivers on my T61p.  I've updated the V5.12 access connections.  In addition to this I was required to update driver V1.52 power management and functionality of the shortcut key for

  V2.10.0002 (two of them were the most recent available).

  After these updates, I can connect is no longer to any access point wireless that worked before this update.  I have tried to reinstall earlier versions of Access Connections, but still couldn't connect to wireless access points.

  ANY help would be appreciated.

  OK, problem solved.  I found that when I ran last weekend system update downloaded and installed an incorrect driver for my wireless hardware.  I installed the correct driver and now the connection to a wireless access point works.

  Certainly, I don't understand how/why not update system would be to download and install an incorrect driver.  VERY FRUSTRANT and TEDIOUS!

• sqldeveloper could not connect the newly created user

  Here is my description of my computer and software
  # OS - > ubuntu 10.04 (32 bit)
  # DB-> 10 g XE
  # Request Express - > version 4.0.2
  # Sqldeveloper-> version 3.0.04
  
  I installed 10g XE in my ubuntu 10.04 (32-bit) with success and you then unblock account HR. After that I upgraded application Express 2 to 4. Then created a new "worksapce' with user name and password.
  
  I can access with success of HR, sys and system account of sqldeveloper. But when I try to access newly created valid workspace with his user name and password I could not do that. You can see more details, [see here | http://www.youtube.com/watch?v=_G_EeBgZ1KY].
  
  But in the past, I can connect newly created Workspace even as human resources account. So what's the problem. Can you guyz guide me to conncet it.
  
  
  Thanks in advance

  >
  I can access with success of HR, sys and system account of sqldeveloper. But when I try to access newly created valid workspace with his user name and password I couldn't do that
  >
  If you have a problem or a question about Apex post in this forum
  Oracle Application Express (APEX)

  In sql developer, you can only connect to users of Oracle (schemas), not workspaces. So unless you have a user called "admin" Oracle, you won't be able to connect. When you created the workspace you may reuse an existing schema or provide a name for the new schema. These patterns are what you would connect to.

  In the nav tree open the tree of the user "sys" and see the list of "other users". This subtree will contain ALL Oracle users. You must log on to one of them.

• Could not open the USB access denied when it detected

  I m using Windows 7 OS when I plug in the usb device, it allows to detect, but it cannot open the shows access denied. When the drive letters shows F: and the FAT format. I also check the security permissions, but it can not open... plse help me

  Asok

  Hey Ashok,

  Why you cannot change user USB access rights?

  Is there an error message that you can post in this thread?

  In addition to Irfans mode of evolution of the property, here is an article with this information:

  http://www.Blogsdna.com/2159/how-to-take-ownership-grant-permissions-to-access-files-folder-in-Windows-7.htm

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Correct configuration of the Cisco Access Point 1242AG

  Hi all

  Here's the situation:

  Recently, we decided to create a small network of WLAN in our company. We choose the Cisco AIR-AP1242AG-E-K9 with 2x2.4GHz 2.2dbi rotating dipole antenna.

  For better management, a new VLAN routable (ID:20) added to our router IP 192.168.55.1 and SNET 255.255.255.0

  Then, I made the following configurations in the autonomous AP through WEB Console:

  • Static IP:192.20.10.35, SNET:255.255.254.0, GWY:192.20.10.200
  • Vlan1 (native) and VLAN20 (Radio0 - 802.11 g) added in Services.
  • I put the encryption against zero for VLAN1 Mode and cipher AES-CCMP for VLAN20
  • In Server Manager, I've defined a new 192.20.10.35 RADIUS server (AP-IP) and a secret shared and left the default ports for authentication and accounting (1645 and 1646). Also, in the default server priorities section I put focused 1 time for authentication EAP and the IP (Radius Server) 192.20.10.35 Access Point MAC.
  • During the General local RADIUS server configuration, I add as a server for access to the network current (AAA client) the same IP address and the shared secret as the ones I use during the configuration of the RADIUS server above. In authentication protocols enable I left checked only the JUMP and the Mac. In addition, in the users individual section 2 new users created with passwords.
  • In the SSID Manager a new hidden SSID created for interface Radio0 - 802.11 g, associated with VLAN20 and in the Client authentication settings section, I left as accepted authentication open with MAC and EAP authentication method. Also, I left the option to use by default for EAP and MAC authentication servers in Server priorities Section and finally I choose mandatory for key management in the section Client authenticated and active the option enable WPA key management.

  I can ping VLAN20 IPs from any PC which is a member of the VLAN native both AP

  As wireless clients, I use 2 Motorola MC5574 with Windows Mobile 6.1 professional. Both of them have a WLAN Jedi adapter that is configured with the following:

  IPs:192.168.55.10 and 192.168.55.11

  SNET:255.255.255.0

  GWY:192.168.55.1

  In addition, a unique profile has been created on all of them to use for the authentication of the association AP. Each profile has been configured for WPA2-Enterprise with AES and LEAP and identification information predefined user (those defined in the PA for individual users)

  The problem:

  Association of clients with AP is always successful but, authentication fails, and I can't ping the AP IP, IP VLAN20, nor the other customers.

  What I'm missing here? I'm sure it's quite simple somenthing but although I tried several different configurations (even WPA - PSK, WPA2-PSK with TKIP) I always find myself without an appropriate solution to unable to ping.

  Thanks in advance for any help

  Hello

  Can you please paste the show run out of AP?

  Kind regards

  Madhuri

• cannot get past error - could not connect the user profile service

  My HP desktop computer has windows 7 - I can't get past - error message "user profile service failed to connect ' & 'impossible to load the user profile'!"  By clicking on the ICON that displays windows closes and repeats the error message read... a new user account must be defined the user upwards and copy the previous settings account - but I can't get there.

  Hello

  You can try the following.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the PC.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• How to print to file? When I try to print to file and name the output file, you receive an error "Port Local | Could not open the file: access is denied. »

  I am trying to print a receipt in PDF format from a printer is currently unavailable for me, but I get an error which prevents me from printing to file. Please see attached screenshots in chronological order.

  Given that I can't add images directly to this issue (page is hindering you try to download a 107KO .jpeg), screenshots are listed below in the following links:

  First: http://i.imgur.com/GTz9A1t.jpg
  Second: http://i.imgur.com/KIpTpIV.jpg
  Third: http://i.imgur.com/GTQQaBA.jpg

  Hi m.patterson,.

  A suitable workaround can be circumvent the printer software using some print to pdf add on such as:

  • Print PDF https://addons.mozilla.org/firefox/addon/print-pages-to-pdf pages
    Home http://printpdf.pf-control.de/index.php/en/help.html
  • Alternatives https://addons.mozilla.org/en-US/fire.../?q=print%20to%20pdf

• After effects error: could not find the main entry point for TitlerAfterEffectsHost.plugin

  Hello

  When start after effect CS6, I get this error message.

  Any ideas on how to solve this problem.

  Michael Smith

  As Mylenium says it's a mistake to third party plug-ins, the titration module NewBlueFX plug-ins. I would like to ask for help with their plug-in:

  http://NewBlueFX.com/support

• Application Plugin error - could not find the entry Point (48::72)

  Hi all

  Anyone who bought my plugin has reported these errors when applying:

  invalid filter (25::3)

  could not find the main entry point for myplugin.plugin (48::72)

  They use CS6 on Snow Leopard on a Mac Pro 3.1 10.6.8 so this should work very well (the effect was compiled as a 64-bit using the latest XCode plugin, the Mountain Lion 10.8.5).

  I was wondering if anyone here has had this problem, and how they have solved.

  Thank you!

  Christian

  We managed to repro this on a machine running OS x 10.7.

  It turns out that it was probably due to one of the two parameters of generation in XCode:

  Basis of SDK, that I put OS X 10.9, and (most likely) OS X deployment target, which is the default value for the compiler. By reducing the Base SDKS to 10.8 and setting the target of 10.5 deployment. This fixed the problem on the machine 10.7.

  Waiting for the user who reported the problem to confirm the re-compiled version works on his workstation. However, I thought that I would put the solution here, just in case someone else has this problem in the future.

  Christian

• I installed Turbo Tax Delux 2011 tax software and get error 42002: could not connect to the update site to receive the latest updates.

  I installed Turbo Tax Delux 2011 tax software and get error 42002: could not connect to the update site to receive the latest updates. Turbo tax support site says adjust the parameters or the rules on my security software to allow certain programs to install and works as expected. How can I solve this problem to allow updates? Thank you. CraigrH

  What is your operating system and Service Pack?

  What is your anti-malware?

• The user * address email is removed from the privacy * could not connect, could not access the directory.

  For the second time in the last two weeks going through my event logs, I noticed several hundred newspaper failed attempts at the course over a period of twenty minutes.  they are random user accounts that don't exist not user 1, user 2, www., or just names at random, the papers say newspaper caused by a wrong password or account.  "the first of these events several connected has this message:" user * address email is removed from the privacy * could not connect, could not access the directory. ».  What does that mean?  Do you need access and control my computer?  Any info would be a great help.

  Looks like someone trying to log on your computer.  Check your firewall settings to make sure that they can't.

  Visit https://www.grc.com/x/ne.dll?bh0bkyd2 the site "shields up" to perform a check.  Some people to dismiss the guy who runs it, but the test doesn't show you which allows your computer to the world to see.

• I can't access my windows store error we could not connect to the Bank. This could have happened due to a server problem or network connection has expired. »

  Original title: I need help please.

  I cannot access my store of windows and can't update all the windows applications not to mention that movie maker and photo gallery witch don't need to be updated. And because I can't access windows store I can't windows 8.1 update for my laptop. When I click on the app store window at startup it loads for a while and what he said to me, 'we could not connect to the Bank. This could have happened due to a server problem or network connection has expired. Please wait a few minutes and try again. "I check my internet and went into my settings to find something wrong with my connection, but I found nothing. So I did a few virus scans and found some malware on my computer. Then I took all the malware from my computer and still could not get windows store to open. I tried to download the updates to my computer and it wouldn't let me. How can I get my store windows to work and get my computer up to date? Help, please.

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Read the link above and run the Troubleshooter "App."

• "Unable to connect" remote pages ("could not read the chrome manifest file'); local pages OK; proxy server is configured to none - what to do?

  Firefox 5.0.1 claims to be updated (how he knew that if she could not connect to the Web?), Windows XP Home 2002 SP3 Dell DIM3000 Pentium 4, 3 GHz, 1 GB of Ram.

  Internet Explorer (8.0.6001.18702 with 128-bit encryption) and Opera (10.2? can't get it to display its version) both can access all the local and remote (Web) pages - Firefox does very well with all local pages but impossible to connect to what anyone remotely.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found

• I can't access my e-mail account (hotmail) like maintaining ping message could not connect.

  : I hope you can help I can't access my e-mail account (hotmail) like maintaining ping message could not connect.

  When I look for details, he said "p/s server has changed.  Input new password.  As I count years I don't remember the password.  It started a month ago and my Tablet and phone keeps ping this message constantly.   How do I 1. Change the server and 2. The password.

  Thanks Maura

  Hi Maura,

  Welcome to the Microsoft community.

  The community of Outlook.com is a good place to find answers to many of your questions how do and get advice from other users and members of the community.  However, questions about your Microsoft account are not best dealt with in a public forum because of the personal information at issue.   Click here to learn more about how to get help with your Microsoft account: where to get additional support for my account and information questions?

  I hope this helps. Let us know if you need more assistance.

• What should I do when the display shows "at the service of the user could not connect. Unable to load the user profile... ?

  I connect to my profile and I am not able to log in. The display shows "at the service of the user could not connect. User profile cannot be loaded... » » ?

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  -------------------------------------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  -------------------------------------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  -------------------------------------------------------------------------------------------------------------------------------------

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">