Drop down the list in the grid depends on the drop-down list at level 0

Similar Questions

• I have some pretty high resolution still panoramas I want to move from left to right, but when I resize the image to fit the image, the resolution drops to an unacceptable level. Is this possible? John

  I have some pretty high resolution still panoramas I want to move from left to right, but when I resize the image to fit the image, the resolution drops to an unacceptable level. Is this possible? John

  Make sure that before you add this photo to your project, you go to the preferences (under the Edit on a PC) and uncheck the default scale to the size of the image.

  Scaling of artificially reduced image size your photo - no matter how large - the size of your video image, make detailed pans and zooms like your impossible. When it is not checked, your photo will be in full resolution and you will only see a small part of it in the preview window.

  That said, don't forget that you work at video resolution, so some details will be lost. (Less so, if you change video high-def). And, of course, don't forget to make your timeline after you have added your pans and zooms to see a better representation of what your final video will look like.

• Satellite M40 does not seem to charge the battery beyond a certain level

  Just a brief explanation of my work.

  I make repairs pc and laptop, replacement of jack, BGA/brazing repairs etc.;
  However computer have always baffled me. I have a Toshiba M40, although I know that this problem is not specific to this model.

  The laptop does not charge the battery beyond a certain level at the moment its impasse on 41%, it says loading in windows but do not go anywhere.
  I saw other portable that stick onto the other percentages 99%, 70% etc.

  I tried to completely discharge the battery (on windows) and reload (for Windows), and also tried to unload and reload not in o/s, if anything they seem to have made things worse as initially the issue of charge level was approximately 50% and more.

  By mistake the laptop wasn't for awhile so the battery flat, which probably did not help as I understand its best to store 40% battery when not in use.

  Any ideas what the problem is and if theres any way to revive this battery?

  Hello

  In my opinion, the problem is related to the breakdown of battery.
  I'm don't know how old your battery is but eventually should be replaced.
  After a long period of use, the battery loses the own performance and must be replaced.
  This is nothing unusual and often to used batteries.

  Welcome them

• What is the replacement for "configure Reference Levels.vi niScope.

  I just put my driver OR-Scope of 3.4 to 3.6 and now the VI, "set up reference Levels.vi niScope" is missing in the instr.lib\niScope\Configure\ directory. I found an old version under niScopeObsolete.llb but this version uses DLL calls where the 3.4 version used nodes of property. What became of this VI and where can I find a covering memo telling me that this feature has been removed?

  Thank you

  Charles

  Hi Charles,

  I looked back through the files on the disk and the oldest version I found this VI was about seven (can't find the files before this date) years ago. It was located under the folder \Measurements\Obsolete even at this time, and it seems to be the same VI (he calls in the DLL). The following year he then changed locations to the niScopeObsolete.llb directory. I was unable to find a version that contained simply property nodes, but you are right that the features are essentially the same. Actually, this is the most likely reason that it is not a top-level function that exists in one of pallets of NOR-SCOPE function, since it is only used in some measures specific and exact functionality can be achieved through the use of knots of property.

  You are able to make use of the current version you found in niScopeObsolete.llb or maybe just nodes of property without any problems? I'm interested in knowing what else was different with the 'new' version that you had with the nodes property. Is that what the icon and/or documents of the VI is different? Do you still have this VI you can join? I want to assure you that this change did not affect your application beyond the confusion to have the situation has changed.

  Kind regards

• Cannot display the properties of Amplitude and level controls

  I'm new to LabVIEW and just installed ver 8.6 on my machine. When I open the TutorialGenAnalyzeDisp1.vi, the run button is disabled. When I double click on the Amplitude and measures of level, I get a dialog box says "cannot display properties. If I click on the run button, I get an error message: "errors of block diagram / Subvi 'Amplitude and level measurements': Subvi is not executable."

  I have the LabVIEW base development system. Is it possible that I don't have that element in my library or an installation problem? I look forward to re - install LabVIEW. It took over 3 hours to install.

  Hi jdai

  The Amplitude and the level of the Express VI measures is included in LabVIEW complete edition and professional development systems, not in the database. So, as you think, you do not have some of the elements necessary for the execution of this VI.

  Best regards

  David

  NISW

• Using the entire cache size two level

  I have a few questions on the use of the full size of two-level cache. First of all, I know that using it, it will significantly improve the performance of the computer. But there will be con him. I would like to know what are the disadvantages of the use of the maximum cache and how it will affect the computer. Thank you.

  The maximum cache will already be used by the processor.  The Act of trying to manipulate the registry value is not the default setting of 256 KB are relevant maybe 10-15 years ago, but it is no longer relevant.

• Where are the best sites for high-level and how information to do different things in Oracle?

  
  Hello

  Where are the best sites for high-level and how information about various things in Oracle?

  Some examples of things:

  * spa

  * spm

  * db replay

  * Resource Manager

  I need a place high-level

  and also a place of step by step.

  For example, I look at these sites:

  www.Oracle-base.com

  www.psoug.org

  Thank you Roger

  Part of the problem is not so much finding sites that have articles on Oracle, that is to find reliable websites with this information.  When I search my site of certification for resources, I find a significant number of people who have 'technical' Articles on Oracle. However, many of these blog posts have simply no useful information.  It is not even that they are wrong so far as article does not include anything that is not declared more clearly and in detail in the documentation.

  That said, a site you have not mentioned above is the Oracle Learning Library.  There very often an excellent material that is very closely linked to the themes of the certification:

  https://apexapps.Oracle.com/pls/Apex/f?p=44785:1:0

• LIMIT to THE dimension values to certain level of hierarchy in OLAP_CONDITION

  Hello
  
  I use OLAP 10 g. I try to limit the dimension values to certain level of hierarchy (not only a certain value).
  
  I have only one dimension: CHANNEL and two levels for the dimension: CHANNEL_TOTAL and CHANNEL_NAME.
  
  In order to limit to a certain value, it is an example of code:
  
  OLAP_CONDITION (R2C, ' channel LIMIT to "all channels"', 1).
  
  But what about limiting to set values to the CHANNEL_NAME level?
  
  something like
  
  OLAP_CONDITION (R2C, 'Channel LIMIT to CHANNEL_NAME', 1) does not
  
  Thanks in advance
  Peter

  channel_levelrel is the purpose of relationship metadata containing the relationship of level for each Member.

  You can try:
  OLAP_CONDITION (R2C 'LIMITED channel TO channel_levelrel eq "CHANNEL_NAME" ', 1).

• Question how to display the layer on a document level automatically-javascrip at the level of the document?

  I have a form in which the user selects immediately their favorite in a drop-down list called color FavColor they have the choice between three colors: blue, yellow or green.  Based on the user's selection, custom layers (BlueLayer or YellowLayer or GreenLayer) are immediately displayed with additional specific questions for the user.  Right now I have the Javascript below in the area of validation of the box FavColor.  It works very well.  My problem occurs after the user saves the document and try to reopen it to print it.  The data is all there, but the relevant layer does not appear automatically (I have to re-enter their FavColor so he can run the script again).  Can someone help me find a solution for this? Is it possible to run a script when a document is opened to determine which layer should show?  Or do I have to create the user save the file differently so that the entry is "committed" to the document?  I'm still pretty new to javascript and programming these formulas so thank you in advance for your help!

  var layers = this.getOCGs (0);

  for (var i in layers) {}

  If (layers [i] .name is "BlueLayer")

  .State layers [i] = (event.value == "Blue");

  ElseIf (layers [i] .name == "YellowLayer")

  .State layers [i] = (event.value == "Yellow");

  ElseIf (layers [i] .name == "GreenLayer")

  .State layers [i] = (event.value == "Green");

  }

  I answered this question under your original thread...

• How to extract the signal from the waveform of my power level designated?

  Hi all

  How can I extract the signal of the waveform accroding to the power level? I read the Trigger & Gate .vi, but this vi retrieves the signal duration. I want to extract the signal depending on the power level.

  As shown in the following figures, the signal I want to deal with is between 130000 to 140000, if I Zoom, I can see the useful signal is between 135400 to 138200. The question is how to extract the signal in the area?

  I tried the sub_NoiseEst_And_Chop_Shell.vi in the example of Packet_based_link also, but this Subvi seems to be a bit slow. Can someone give me the best advice? Thanks in advance!

  

  

  I'm working on something similar, but have not had time to fully develop.

  My idea was to use an envelope detector (low pass filter) and then use a detection of energy VI on the envelope.

  Here is where I left

  

• Check the HP PSC 1210 ink levels

  I have a HP PSC 1210 with a HP Pavilion G6 running Windows 7.  How can I check my ink level? It used to be the HP Toolbox, but that has disappeared. Thank you

  Look at this link here on the frequently asked questions for the upgrade on this printer to the Windows 7 driver installation. Some advanced features are not available. The Toolbox of the printer has a workaround solution to check the estimated ink levels.  There are two listed. Under the frequently asked questions, click the sign of "HP Toolbox workarounds", it's towards the end of the page. There are also some great info in the FAQ for the solution also Center.

• How do the contacts become exclude system level?

  When you create a distribution list, under "Excluded", we exclude system level.  I guess these could be hard bounces or invalid email addresses, but I'm not sure.  Exactly how a contact becomes a level system exclude?

  Matt,

  As Paul noted above, he is more level system type include

  -Opt-out (all your unsubscribe through links subscription, Center of preferecence, etc...)

  -Hard Bounceback (invalid email or invalid e-mails identified by the system)

  -Spam unsubscribe (all contacts that have marked e-mail coming from your IP as spam, Eloqua will automatically report them as you unsubscribe)

  -Master exclude (your system administrator build and maintain this list. Corresponds to the list of your competitors or others, that you do not want to receive your emails)

  I hope this helps.

  Good luck!

  Nadine

• ? Selection of 2/3 the RGB channels to adjust levels

  It's a question of CS4 (and I would like to express my ingratitude to Adobe for dropping a set $ 1800 of apps support).

  In Photoshop CS4, using a G5 (not Intel) in the Billboard of channels (alongside layers, etc.), where the display RGB, red, green and blue, I am able to shift + click, say, the red and blue channels selected as both. The image is always displayed in full RGB. When I run the command-L (levels) I find myself with the area of disalog instead of the default 'RGB' choice and basic levels to adjust, I now have 'RB' and I can adjust red and blue with the sliders, avoiding the Green layer. I can do that, of course, three combinations.

  For some reason any when I try this thing even on Intel Mac a friend with Photoshop CS4 (even!), shift-click on the red and blue in the channels palette selects channels but the display picture shows now without the Green layer that affect the image, making it unusable for the adjustment of the two channels at once then.

  I think that since I'm on the same version of the App on every Mac, maybe there is a setting somewhere that I can't find, or I forget a step on the way to my friend's computer.

  Q: How do choose 2 channels in the palette layers everything with my display in color and also power picture choose these two channels for the adjustment of the levels?

  For those of you who are wondering WHY I would pay 2-way only once, here's an example: an image looks too yellow, lsightly bt ther eis no yellow channel. Yellow is full red and green, so using my method, I can choose those two channels and reduce the yellow by reduing R & G together.

  You should be able to move click on the red and blue channels, then make the visible RGB (the visible ŒIL by clicking this box)

  

• How to check the developer 6i Patch Set Level in 11i

  Hi DBAs,
  
  I need to check my Oracle 11i (11.5.10.2) system has Developer 6i patch set 17 or more. Please help me to determine that the developer 6i Patch upgraded.
  
  Thank you
  -Samar

  PL see ML Doc 232313.1 (information on previous Versions of developer 6i Patchsets) which lists the different version numbers installed by different versions of 6i (Patch15 to Patch 18 ) fix.

  If you call f60desm on Unix, you can see which version is installed.

  You can also run the executable file in ORACLE_HOME/orainst/inspdver $ to get the version number. See ML Doc 148392.1 (how to find what has been installed on a Unix Forum)

  HTH
  Srini

• How to change the default zoom to 150% level?

  I'm not a geek and I think I want something simple: when I run Mozilla Firefox I want to automatically set at 150% zoom. In other words, I want to remind that my preference is 150% zoom level so I don't if it fix whenever I have run Mozilla Firefox or open the new tab in Mozilla Firefox. Is this possible?
  Thank you
  Mike

  This and other add-ons can do the job,

  NoSquint {web link}
  NoSquint allows you to adjust the text-only and the full page
  (text and images) zoom and color settings levels
  both globally (for all sites) and by site.