Drops of WiFi after exactly 10 minutes

Similar Questions

• Laptop freezes after exactly 2 minutes

  My laptop freezes after exactly 2 minutes. I don't get the problem when booting in safe mode. I've disabled all services & then allowed them one at a time and the problem seems to be with BITS & Windows update. My laptop will not freeze if I let only these two services turned off. I ran the Scanner to complete MS who managed nothing found. I also ran sfc/scannow & cleaning. I have a HP G7000 Notebook running Vista Home Basic 32-bit with SP2.

  Thank you.

  What follows is a generic response.
  Among the measures that you have already done.

  There are many reasons why a PC "behaves" in this way.

  These boring "desynchronization" can be caused by an overloaded hard drive, CPU overworked, Malware, 2 AV, useless data, browser addons, or you can have unnecessary programs running in the background, etc...

  What follows is a series of steps that you want to try troubleshooting...

  * Make sure that all the intake/exhaust vents are clean as well as fans.
  Download some software temp monitoring for cpu, gpu.

  * This could be a hard drive that goes wrong or corrupt.
  To check a hard training see Check Disk...
  Run the disk check.

  * In a Directors account type cmd in search.
  Type sfc/scannow in cmd.
  This report and solve minor problems.
  Take note of what is said at the end.
  Your computer should freeze, try to do the tests in safe mode.

  * Go to search, type Manager devices and look for the yellow warning markers.

  * If overclocking, restore to the original.

  * Try in safe mode; report back if it works properly.

  * Minimum. You to find out what is causing your problem.

  http://support.Microsoft.com/kb/929135

  * Run a scan with Malwarebytes.
  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

  List of all security software that you had already installed & currently now have on your computer please.

  * Browser addons can create problems.
  Check how much you have on your browsers.
  Each & every one is really necessary?

• Drops of WiFi after unlocking

  Just recently my phone has started to abandon the wifi connection after unlocking.

  It seems to stay connected after that screen, I wake up, drops of bu as soon as I unlock wifi connection. Considering that it is used to work properly, do not drop the connection either. The only thing that has changed is the last update for the Z3C OTA, but it was weeks ago.

  I tried the following things:

  -Reset the router

  -Removed and reconnected to the Wifi

  -Thinkered autour with other Wifi settings

  -Stamina enabled and disabled mode

  -Other networks tried to no result, the problem persists

  -Assigned static IP

  Any suggestions?

  You meet him even then on safe mode?

  http://talk.sonymobile.com/T5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008

• Major Frame Drops after 5-10 minutes

  Hello world

  I'm really frustrated here, I'm a game developer, and I use the GPU in almost all cases, from Photoshop to unity still play games myself. Since the last update 10.11.4 I have this huge problem , and everything I do will not disappear.

  Whenever I run an application / game that rotates with GPU I get spikes massive lag and thus Frame Drops, they last about 1 seconds but they occur every 30 seconds - 1 minute, this is a huge deal for me and I can't really work like that. Of course, I put photoshop to the CPU usage for now and no problems. But I really need to work efficiently and without Frame Drops.

  I run at El Capitan with a Macbook Pro LATE 2013 10.11.4 @.

  2 GHz Intel Core i7 (CPU)

  8 GB 1600 MHz DDR3 (RAM)

  Intel Pro Iris 1536 MB (GPU)

  Before someone says I should have got the Nvidia gpu, I should mention that I tried on 2 games to 1 which I played with ease previously:

  Hand of fate

  The Witcher: Enhanced Edition

  Please if someone else has the same problem, make sure that post you here. It bothers me that I have not found anything about the case.

  I also ran an EtreCheck if anyone is interested:

  EtreCheck version: 2.9.11 (264)
  Report generated 2016-04-16 15:29:41
  Download EtreCheck https://etrecheck.com TIME 01:31
  Performance: Excellent

  Click the [Support] links to help with non-Apple products. Click the [details] links for more information on this line.

  : Another problem
  Description:
  Whenever I use an application that uses GPU or if I play a game, I get large Frame drops after 5-10 minutes in application t.

  Hardware information:
  MacBook Pro (retina, 15 inches, end of 2013)
  [Technical details] - [User Guide] - [warranty & Service] MacBook Pro - model: MacBookPro11, 2
  1 2 GHz Intel Core i7 CPU: 4 strands
  8 GB RAM not extensible

  BANK 0/DIMM0
  OK 4 GB DDR3 1600 MHz

  BANK 1/DIMM0
  OK 4 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge Wireless: en0: 802.11 a/b/g/n/ac
  Battery: Health = battery check - Cycle count = 460

  Information about this video: Intel Iris Pro

  Color LCD 2880 x 1800

  System software:
  OS X El Capitan 10.11.4 (15E65) - since the starting time: 4 hours

  Disc information:
  SM0256F SSD APPLE disk0: (251 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (disk 1) /: 249.79 (GB free 65.99) encrypted AES XTS unlocked
  Storage of carrots: disk0s2 250.14 GB Online

  USB information:
  Apple Inc. Apple keyboard / Trackpad

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy text from a particular web page (not this one) to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

  In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

  11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• I have a mac with an SSD, it freezes after almost exactly 60 minutes

  I have a Mac with an SSD. It freezes after almost exactly 60 minutes and made for quite awhile - new version of iOS makes no difference

  What specific model Mac?

  Install a speed temperature and fan monitoring app like the following to see if overheating is the cause of the problem

  http://www.CrystalIDEA.com/Macs-fan-control

  • Note the time of the next frost. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of freezing. Suspicious message here.

  Search before the journal entry that begins with BOOT_TIME since it is the first line of ahttp://www.crystalidea.com/macs-fan-control start

• My internet connection is lost at home after a few minutes. I re - turn on the wifi disabled, ten and it works again for a few minutes and then repeats. It works fine everywhere else?

  Relatively new MacBook OSX El Cap 11.4

  My internet connection is lost at home after a few minutes. I stop the wifi, then turn it back on and it works again for a few minutes and then repeats. It works fine everywhere else?

  Please see recommended settings of WiFi routers and access Apple points.

  Despite these recommendations, some routers will work better with the latest Mac models if you turn the radio 2.4 GHz mode in settings and only use the 5 GHz. Note, however, that very old devices Apple and some third-party devices can then not connect at all.

  Some third party routers have advanced that you may need to change the settings:

  The encryption algorithm must be AES.

  The group key interval must be 3200.

  I can't give you specific instructions on how to change these settings, because all routers are different. Refer to the documentation for the provider.

• After about 10 minutes connected my connection drops and I have to keep resetting my hub [BT Hub]

  After about 10 minutes connected my connection drops and has you keep resetting my hub [BT Hub]

  Hello

  What operating system is installed on the computer?

  Method 1: I suggest that you follow the instructions from the link and check if that helps:

  http://BT.custhelp.com/app/answers/detail/A_ID/7609/~/my-broadband-connection-keeps-dropping

  Method 2: Follow the steps in the link and check if it makes a difference:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• VPN users drops after every 5 minutes

  Hello world

  We have users whose remote VPN drops after every 5 minutes.

  I need to know what things can check to solve the problem?

  The user connects by RSA Token.

  ISP connection is ok is not question.

  Something I can verify in SAA?

  Thank you

  Mahesh

  Client side, have you tested wired vs wireless to see if the problem exists in both?  If it's the only one, but not the other, try to update the drivers.  Also, if it's windows 7, take a look at the power settings in the control panel.  I saw where the aggressive powers will be stop standby network port.  Not that big of a deal in a LAN environment but it wreaks havoc on the VPN.

• Satellite L450 - 13G - No WLAN signal after a few minutes

  Hello. I just bought a L450 13 G with Windows 7 pre loaded.

  I noticed that a lot of times drops wifi connection. It starts as an excellent signal and then suddenly fades to no signal after a few minutes. I can't get it remains connected, if I'm in the same room or the next day. I have also a few years L or U 200 (I think) and it remains connected wherever I am at home.

  What could be the problem?

  Hey Buddy,

  I assume you are using the preinstalled version of Windows 7. Is this good?
  If so try to update the WLAN driver. If you are looking for your laptop model, you will find the latest version on the Toshiba site.

  In addition, check the configuration of the router. If you use a MAC address filter, try to disable it. Try another encryption and password encryption.
  Also check the firmware if you use the most recent one.

• Problems with WiFi after put 10.11.2 up-to-date.

  Mid 2011 iMac.  Problems with WiFi after put 10.11.2 up-to-date.  No associated network.  Everything was fine before the update. All the pre 10.11.2 device works fine.  Anyone else having issues?  I have to disconnect and reconnect manually.  WiFi drops every 5 to 10 minutes.  Nothing has changed on the machine something of the update.

  Please do not comment on the age of the system.  Achieve a Mid 2011 arrived at a possible replacement point.  I have many other new Mac at home.  The Mid 2011 is spec'd with 16 GB of RAM, i7 and SSD.  It's always very fast.

  Thank you in advance for the answer...

  Hi Captainsniz

  There are a few things to try. Keep doing this until the problem disappears.

  First of all, if you have not already, shut down the computer completely, wait about 1 minute, then restart.

  Disconnect the wifi network either via system preferences, either by pressing the "Option" key and clicking on the wifi menu bar icon.

  Reset the DHCP lease by going to system preferences > network and show Advanced Options, and then click the button to "Renew the DHCP lease" TCP/IP tab.

  You can delete the wifi network of system preferences > network > network name... then close system preferences. Then reopen and add the network in.

  You can also restart your wifi router, it erases the old connections. Most of the routers you just turn off and wait a few minutes, then restart. You can also reset your ISP modem if you have a.

  Finally, you can try to reset the PRAM and SMC on your Mac. I'll get this info here on Apple Support KBs for your particular Mac.

  Be sure to back up your computer.

  Hope this helps, Greg

• Drops of WiFi at the horizon stream

  Hi guys,.

  Since I discovered that I could watch tv on my laptop via horizon tv (my internet service provider, Ziggo tv streaming service), I use it. I listen to in safari via a Web page. Safari is updated.

  But, when streaming and working on something else (another Web page, look at a picture with preview, or work with adobe [illustrator or photoshop are the worst]) guard down my WiFI. The symbol of wifi in the right corner just "cast" (so no connection to WiFi networks, not whether bars). It takes a few seconds and then it reconnects again, only to fail again after half a minute or so.

  As you can imagine, it's very, very, very frustrating.

  I have swapped the switches and wireless access points, changed the WiFi preferences (channel and others, checked with the diagnosis of wifi to find the best channel etc.) and I tried other networks within my main network at home (we have a total of 2 wireless access points on the top of our main router because it cannot reach the whole House). Nothing seems to work. The cisco wireless access points, switches are ubee modem and netgear. The main router is looking for a (rather daunting) Netgear.

  My wifi access point is connected to a 100mbit switch that is directly connected to the main router, which is connected directly to the modem.

  But, since the rest of my devices seem works fine when I hear something, I think it has something to do with my laptop.

  Which is frustrating, because it is relatively new and a major update since my last macbook.

  I have a new macbook pro retina 13 "(bought last December) with the following specifications:"

  2.9 GHz processor
  512 GB hard drive

  • 2.9 GHz dual-core Intel Core i5
  • Tot Turbo Boost 3.3 GHz
  • 16 GB 1866 MHz LPDDR3-geheugen
  • 512 GB PCIe - flashopslag¹
  • Intel Iris 6100 graphics card

  In addition, I use an external monitor via VGA and displayport.

  So I really hope that someone can help me, maybe it's some file processing streaming on my mac which interferes with the WiFi when I do more than a simple internet browsing? Because the question does not pop up when I'm streaming something AND work on something at the same time (often reloaded webpage, a program "heavy" like that of the suite adobe)...

  Thanks in advance.

  Hold down the option key while you click on the wireless icon in the menu bar. You can screen geta that looks like this:

  

  What values do you want to show to the PHY mode and channel?

  What are the RSSI / signal strength?

  What emission rates?

  very important and how many other networks do you see?

  .

• ProBook 470: ProBook 470 poor WiFi after upgrade to Windows 10

  Hi all

  There are so many issues report on WiFi on Windows 10 problems, but I'm not really mine.

  I'm running the ProBook HP 470 with WiFi Atheros 9000 series card. It worked fine with Windows 7 Professional 64 bit.

  A couple of weeks, I decided to upgrade to Windows 10. Everything works fine, except the WiFi. I can connect to the WLAN and network speed and the signal strength is perfect, but after a while (minutes or even hours), he falls abruptly to the bottom and my router WLAN even States disconnected, but he'll fix itself after a while. I can force the "self-repair-speed" of disabling and enabling WiFi again.

  But, this is no good solution, WiFi has to work reliable all the time when not moving and it work perfectly with Windows 7. I was hoping that Microsoft and hardware vendors manage drivers after one year of version 10 of Windows, but seems not to be the case.

  I have already installed the latest driver for HP download site, but it is already a year old, and it was the same thing as Windows / Microsoft has done while Windows Upgrade. Therefore no change to be expected.

  Before that I go down again to Windows 7, what can I do? There are a few other pilots who could interfere with WLAN and might not be updated? (More of the WLAN driver I don't have other day manually because I count for the Windows upgrade process.)

  Volker

  The laptop is to date, according to the release of Windows 10.

  Anyway, it doesn't work well, that's why I decided to downgrade to Windows 7. Now it works again as it is supposed to.

• HP 250 G2, stop down after a few minutes when idle

  Dear all,

  It's my first time to post on the forum; I hope you take slightly if I can't follow the requirements in the process.
  
  I recently acquired a laptop HP 250 G2 that came with Windows 8. I noticed it was a little insensitive, especialy when you type something or double-click to launch or open a file/folder/app/program. So, I decided to change to Windows 7 Ultimate 32 bit - this operating system has proved to be untenable since I couldn't find the drivers especially for graphics. On the HP site, I found graphics drivers for windows 7 Professional 64-bit, so I changed that.

  The challenge with the Windows 7 professional 64 bit was that the USB 2.0 drivers, adapter WiFi, Bluettooth and PCI are really difficult to find, literally, I spent two nights at their research. Finally, I found them.

  (1) I however noticed that my laptop voluntarily stops completely after 7-10 minutes of inactivity and when that happens, the light on the switch of the WiFi button stays on, and when you press the caps lock shift key, the light comes on and runs constantly - until when you restart. It also takes time to power when it does this, sometimes invites me to remove the battery and reinstall it before he can answer.

  (2) as I mentioned, it was difficult to find some crucial drivers for the PC. I made a number of errors of judgment and managers of different sites and I think that I installed several drivers unnecessary, risky and out of place, I was wondering if anyone here knows of a driver or a program I can use to identify individuals 'undesirables' drivers and help uninstall them.

  Thank you -: 0

  Hi @Herdsboy,

  To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.

  Here is a link for your laptopto help you get started.
  Thank you.

• When I shutdown computer after a few minutes his restarts automatically

  When I shutdown computer after a few minutes his restarts automatically

  Try this... you can first unplug your cable ethernet and if it does not restart... here may be the problem. The following has worked for me, but I tried not to disconnect the cable first.

  Open network and sharing Center

  In select it left panel > change map settings

  Right click on Local area connection > properties > configure

  Advanced tab

  The title of the property (listbox):

  Select > Shutdown Wake-On-Lan

  In the value (drop down list): (change) turn off

  I hope that helps!

  Jason

• Screen saver goes to black screen after a few minutes

  My screensaver goes to a black screen after a few minutes

  Hello

  It is supposed to do that by default

  normally a screensaver lights after 10 minutes then after another 10 minutes, the screen will become black according to the parameters of exact time for her

  It is a function of energy saving

  If your problem is different from the above, please explain in more detail