DRS/HA when the guests have access to the different storage

Hello

I wonder what will happen in a scenario where all guests are in a group, but not all guests have access to the same storage (see attachment).

Is smart enough to only migrate (or start) DRS/HA a virtual machine for guests who have access to the storage, it is located on?

I understand this is probably not a supported configuration, but this is a temporary measure

Thanks for any help.

In a HA/DRS configuration, it is recommended to have shared storage. But even if you have no shared storage, you can always enable HA/DRS, but your virtual machines will not be protected HA.

Yes, the DRS is smart enough to move only those virtual machines that are located on a shared storage, in case of lack of resources. HA, too, smart enough to restart these virtual machines, on the other hosts that are on shared failure of host storage only.

Tags: VMware

Similar Questions

  • Registration of diagrams for the different storage types

    Hello

    the problem here is this:

    -There are two schemas X and Y, which, for objective reasons, need to be registered for different storage types

    -schema refers internally to the schema X

    X is saved as binary storage successfully model

    There is saved as structured storage and here, the system complains with the message:

    Error starting line: 1 at the controls.

    BEGIN

    () DBMS_XMLSCHEMA.registerSchema

    SCHEMAURL = > SYS. URIFACTORY.getURI('/rdm/rdmElement2.xsd').getURL (),

    SCHEMADOC = > SYS. URIFACTORY.getURI('/public/tech/xsd/rdm/rdmElement.xsd').getXML (),

    GENTYPES = > TRUE,

    ENABLEHIERARCHY = > DBMS_XMLSCHEMA. ENABLE_HIERARCHY_CONTENTS

    );

    END;

    Error report-

    ORA-31091: empty string specified as the name of SQL

    ORA-06512: at "XDB". DBMS_XMLSCHEMA_INT', line 55

    ORA-06512: at "XDB". DBMS_XMLSCHEMA", line 159

    ORA-06512: at line 2

    1. 31091 00000 - "string specified as a SQL name empty.

    * Cause: The XML schema document contains a SQL null name. For

    for example, the SQLName, SQLType, defaultTable attribute values.

    * Action: Make sure all objects specified SQL schema names in the

    XML schema document are valid SQL names. Otherwise, delete

    These attributes of the schema and try again.

    Is it really true that the types of storage should not be mixed? According to the docs, it shouldn't be a problem.

    Everything is fine when the two schemas are registered as the same type of storage.

    Any suggestions that might cause the problem?

    Thank you very much in advance for your help.

    To explain with a simple example, why mixed storage may not work...

    When we record a relational storage schema object, Oracle creates backstage of a set of object types and SQL collection that map XML to SQL data model structure.

    If you understand that it is also easy to understand why your scenario is not supported.

    For example, let's say that this is "schema X":

    Start

    () dbms_xmlschema.registerSchema

    schemaURL-online 'schema - X.xsd'

    schemaDoc =>

    "'http://www.w3.org/2001/XMLSchema" >

    '

    local-online true

    genTypes-online true

    );

    end;

    /

    Without annotations of schema, Oracle will create an object SQL like this (generated by the system name) type:

    CREATE OR REPLACE TYPE "DEV". ("' CommonType5101_T" AS OBJECT)

    "SYS_XDBPD$" "XDB". "' XDB$ RAW_LIST_T."

    VARCHAR2 (4000 TANK) "item1",.

    'item2' VARCHAR2 (4000 TANK)

    )

    NO FINAL CANNOT BE INSTANTIATED

    /

    Now, let's say this scheme registers Y, which uses the schema X Atapez:

    Start

    () dbms_xmlschema.registerSchema

    schemaURL-online 'schema - Y.xsd'

    schemaDoc =>

    "'http://www.w3.org/2001/XMLSchema" >

    '

    local-online true

    genTypes-online true

    );

    end;

    /

    Similarly, Oracle will create another type of SQL object:

    CREATE OR REPLACE TYPE 'Root5106_T' AS OBJECT)

    "SYS_XDBPD$" "XDB". "' XDB$ RAW_LIST_T."

    'Content' 'CommonType5101_T '.

    )

    FINAL CANNOT BE INSTANTIATED

    /

    As you can see, the type of 'root' reference the previously created type 'CommonType5101_T' when registering the schema X.

    If the schema X is registered for binary XML, no extra SQL type is created.

    Therefore, when we try to save the scheme there for the object-relational storage, Oracle will try to retrieve the name of the type that 'Content' attribute of the root must be based on, but since this type does not exist, an error is raised.

  • guest computer must have access to the printer host cannot use

    I have a new Mac, an old Mac, an old Windows machine and printer of Xante AW1200.

    Almost all of my work is done on the new Mac.  I get the old machine Mac or Windows of the drawer on rare occasions, or when I need to print something, because the new Mac cannot use the printer.  (Xante never taken the trouble to develop an OS X 10.6.4 driver for this printer.)

    I would like to get rid of the Windows machine.  I have it successfully migrated to a machine of comments on the new Mac, using vmware Fusion 3.1.3 but I have not found a way to get the computer to see the printer.

    This isn't a complete surprise, as Xante does not provide a driver for their (former) printer and (my new host) operating system OS X 10.6.4 - but they were planning a WIndows XP driver that has always worked well on the Windows machine, connected by the RS232 port.

    The printer also works very well on my old Mac, connected via ethernet.

    Can I connect the printer to the new Mac's ethernet port.  Of course, the Mac cannot work with it.  But could the guest computer use Windows sound driver to manage the printer?

    None of the four standard ways of printing seem applicable: ThinPrint because the host cannot use the printer.  USB because the printer is not a USB connector.  network / wireless because I do not have my old Mac running all the time.  Hello because I think that it requires that the host can see the printer.

    It certainly isn't a frequently asked Question.  Sorry, my situation is so unusual.  But the printer is special enough for the work that I do.  Any tips?

    Thank you.

    If you have a router on your site then you should be able to connect the printer to the router, configure it as needed, and then accessing it in the comments as a network printer.  Note: The guest network should be configured as connected by a bridge to access in this way.

    Another option of network which is doable, but a little more difficult to set up, is to fix the printer directly on the Mac with a standard CAT5 Ethernet cable, not a Crossover as suggested in the Ethernet Port of Mac being automatic detection User Guide.  You would then manually configure the IP address, etc. on the printer and network bridged on the comments and even if Bridged his only access to the printer on this network adapter.  Then use a second network in the guest configured as NAT, if you do not also use Bridged on that, to enable the client to have access to other resources on the physical LAN to the host, such as Internet access, etc..

  • I had two apple ID, but only now have access to one of the e-mails. When I try to login, it differs on the account that I no longer have access to. How can I change my information to my * account?

    I had two apple ID, but only now have access to one of the e-mails. When I try to login, it differs on the account that I no longer have access to. How can I change my information to my * account?

    < email published by host >

    As you know that these are user forums, it is not a good idea to post your e-mail address on a public forum - I asked the host to remove it.

    What "information" do you want to go? You can transfer iTunes downloads to another account, or to merge accounts - all downloads are permanently associated with the account that has downloaded (if only this account can potentially re-download purchases, downloads of updates of its applications, authorize such purchases on iTunes from the computer, and make in-app purchases in them).

  • Just recently, I receive the following error message when you try to access the web sites. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. There is a problem with some plugin?

    Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?

    It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 3.4.1.195. Go to http://siteadvisor.com and click on download. This will fix the problem.

    Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.

  • I have the latest Firefox installed on an older Dell and the CA security suite through my ISP, that takes up all my CPU and causes everything to freeze when I try to access its features. I need a free internet security software that my so tax system

    Have old Dell Dimension 32/bit with Win XP Prof 2002. I installed the security suite CA from my ISP, which is a huge program and uses 100% CPU on starting and stopping, slowing everthing at a snails pace. I deleted evrything I need not using 30 days free Revo Unistaller Pro, but when I try to access the CA firewall to add programs to the exemption, it opens, then freezes tabbed Firefox and nothing else. Can not even stop from the start menu. I want to get rid of all (even if it's a good program, it's too big) and return to my Win Firewall(or another better free firewall that's good for more than 30 days trial) and some other internet security free program that is easy, runs in background and does not all my resources and is not just a 30 day free trial until you purchase the program. I also try to install a wireless adapter, so I can drop my ISP and use the free city/county signal as no work for 20 months!

    This has happened

    A few times a week

    == Trying CA security firewall access Suite

    I am the original poster, and I got rid of CA Security Suite & and loaded the Avast! who has some interesting features, even on the freeware. No more crashes or freeze & yes I think there is a problem with CA & Firefox, but don't know what it is. It was a big big time eater. I also got rid of my ISP and installed an Intellinet Wireless G PCI Card & am now entirely wireless on my PC. More quickly by far than what I was paying $50 / month for & I use my Windows Firewall.

  • I run 10 64-bit Windows and I have used iTunes for years. iTunes installs OK, I disable Norton Firewall during installation. iTunes starts OK, but when I try to access the store down ¾ of the page turns black

    I run 10 64-bit Windows and I have used iTunes for years. iTunes installs OK, I disable Norton Firewall during installation. iTunes starts OK, but when I try to access the store down ¾ of the page turns black, the upper band has Taylor Swift and a few small icons to the bottom of the page. If I type Perry Como, in the search box, the page does not change.

    lysdexic01, I know almost exactly what you describe on my screen of iTunes Store recently updated for Windows 7 64-bit. Only difference is that the icons in the black box are invisible until I move the mouse above them, their location by trial and error. Once activated, the icon remains visible. Each found icon flickers at first, but stops flashing if I pass the mouse over it.

    I think that the store is now functional and useless for those of us experiencing this problem. Other users have reported that their iTunes store screen flickers since they updated iTunes to the latest version, but most did not mention the area big black screen that you and I see.

    So far, Apple seems not to believe that there is a problem with the software to update iTunes. It is therefore important that users continue to report these problems to Apple that there are enough complaints for attention even during a week of office party.

  • When I have access to the internet, I get a page advertisement of Windows Explorer that is empty.

    Original title: Windows Explorer announced.

    When I have access to the internet, I get a page advertisement of Windows Explorer that is empty.  How can I stop this coming?

    I think I found a solution.  A very good actually, if it works.  I opened the adversiment. just a line in the upper part of the screen and goes to unsubscribe.  The line mentioned coupons that I'm not interested.

    He said that it takes several days to unsubscribe, so I don't know if it will work.

  • When you reply to a post in a yahoo chat room, I suddenly said... you have been disconnected from the chat because you have accessed YAHOO! MESSENGER from another computer or device? That is what it is?

    When you reply to a post in a salon political discussion of yahoo, I suddenly get the message... you have been disconnected from the chat because you have accessed YAHOO! MESSENGER from another computer or device.  I did not as far as I know?  Thank you, Charles

    Hello

    The message "you have disconnected because you access Yahoo! Messenger from another computer or device." appears when you try to connect twice with the same Yahoo! ID. Someone knows your password and he at the same time connecting with you or you have Yahoo Multi Messenger and accidentally logging in twice. One solution is to change your Yahoo! password or not to use Yahoo Multi Messenger with the same ID.

    Good luck!

  • Error when you try to play audio files: Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer where the file is stored

    Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect.

    I hope someone can help on Win 7 64 bit, music is taken on a disk usb2 external hard... I had no problem until today when the message in the title appeared next to each track, with a little red cross.

    I already deleted database library as suggested by some of the forums, also disabled the media as a feature of Win 7, rebooted and then re-enabled it.  I also disconnected externally and restarted that as well, I'm also the same mistake with a cd in the cd drive as well.

    Can anyone help?

    Hello

    This error may occur for one of the following reasons:
    The file is currently in use. Close the file and then try again.

    You are not allowed to access the location where the file is stored.

    Follow these steps to grant all permissions in the folder where the files are stored:
    1. right click on the folder on the external drive and click Properties.
    2. in the Properties window, click on Security tab.
    3. now, click Edit , and then click Add.
    4. now, type everyone in the box and click OK.
    5. check the full control box.
    6. click on apply and then click OK.

    You can also try the mentioned below as follows:

    1. click on start.
    2. go in Control Panel.
    3. Select "SOUND".
    4. double-click on speakers.
    5. click on the tab advanced and then uncheck the enable audio enhancements.

    Kind regards
    Amal-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • When trying to download Adobe Flash player, error, do not have access to the installation program

    I have a windows 7 64-bit and I am the administrator, but when I try to download flash player, it says that I don't have access to the installation program, now I'm without flash and almost nothing works. Any ideas?

    First of all, try to enable Active Scripting in the areas of Sites Internet Options, security settings, trust.

    You should also add a corrupted on.

    Click Start, type: Internet Options

    Press enter

    Select the "Advanced" tab

    Under reset Internet Explorer settings, click "reset".

    This should restore the Internet Explorer default settings.

    Then reinstall Flash Player

    http://get.Adobe.com/flashplayer/

    ----------

    Flash Player

    Troubleshoot installation of Flash Player for Windows

    http://kb2.Adobe.com/CPS/191/tn_19166.html

    Troubleshooting player stability and performance

    http://blogs.Adobe.com/JD/2010/02/troubleshooting_player_stabili.html

    Uninstaller

    http://kb2.Adobe.com/CPS/141/tn_14157.html

    Flash Player Support Forum

    http://forums.Adobe.com/community/webplayers/flash_player

  • I receive I/O-ERROR in bridge CC when I try to access the outputmodule. I have instaled the wersion more recent module, but it does not solve the problem. What should do?

    I receive I/O-ERROR in bridge CC when I try to access the outputmodule. I have instaled the wersion more recent module, but it does not solve the problem. What should do?

    reset your preferences: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html

  • Running older Acrobat Pro 9 on laptop v.  It crashed.  I do not have access to inactivate.  Have a new laptop and have taken the serial number when he asks the trial version.  He rejects as it is an outdated version.  Called service and they

    Running older Acrobat Pro 9 on laptop v.  It crashed.  I do not have access to inactivate.  Have a new laptop and have taken the serial number when he asks the trial version.  He rejects as it is an outdated version.  Called service and they continue to direct me to the cat «get help»  I only stay 7 days before the crashes of the trial version and would like to help.  Without having to spend $400 for a new product.

    Just before installing the new Acrobat without buying it. Your serial number will only be for 9.0.  And there will be no support, it was long after the end of life. Use your original disks.

  • When I try to install v.6, CD or as copied photoshop folder on the desktop, the installation stops with "Error1310-error to write to the file. Make sure you have access to this directory.

    When I try to install v.6, CD or as copied photoshop folder on the desktop, the installation stops with "Error1310-error to write to the file. Make sure you have access to this directory.

    Please see:

    Error "1310: error writing to the file: C:Config.Msi...» » | CS4 products

    I hope this helps.

    Greetings

    Megha Rawat

  • I have the following error message when you try to access the settings preferences "load library failed with error 1114: (DLL) initialization routine failed. I use Windows OS 10. Can anyone help?

    I have the following error message when you try to access the settings preferences "load library failed with error 1114: (DLL) initialization routine failed. I use Windows OS 10. Can anyone help?

    HI lifeimagecreations

    Greetings!

    Please see this thread in the lightroom preferences entry CC2015 crashes with LoadLibrary failed with error 1114

    If this does not work, reinstall the program with administrative rights.

    Let us know if this helps

    Concerning

    ~ Assani

Maybe you are looking for

  • My seagate drive external drive keeps ejecting properly after installation of OS El Capitan

    My seagate external hard drive keeps ejecting properly after installation of OS El Capitan, it locks also towards the top and turns off, the ext drive when using, I have to restart my IMac 27 inches.  I have two ext hd who does very well for years be

  • Speedy Pc Pro, claimed Microsoft Partner

    I have automatic Microsoft Updates and Security Essentials, most my Verizon email provider DOE is a free automatic security using the McAfee software scan. "" But a quick scan Pro of: software, system problems malware, performance issues, elements of

  • message from the laptop: consider replacing your battery

    I am operating XP, but I get a message from windows 7 "consider replacing your battery". "there's obviously nothing wrong with my battery - ideas?

  • HP photosmart c4599 all-in-one

    I have recently for the 1st time filled my Costco HP ink cartridges and I got the exact same back and put them in my printer. My printer is saying "cartridge incompatible (S). How is this possible and how can I solve this problem?

  • BlackBerry Torch 9800 smartphones, unable to connect to Wi - Fi

    When I created my Torch 9800 to connect to Wi - Fi, the home screen indicates the SSID of the access point, but when I try to use the browser, it displays "unable to connect to the internet, please try again later. The 'Device and status Info' screen