DSC error: IAK_SHARED failed to start the service

When I try to deploy a shared variable library, she fails to deploy and gives me the following message: error:-1967362042, IAK_SHARED: (Hex 0x8ABC7006) failed to start the service.  I'm using LabVIEW 8.6 with DSC 8.6.  I tried to run one of the examples (the example of the heat exchanger).  Any ideas?  I have LabVIEW 8.5 installed as well (many of my clients are still using it), and I got 8.5 installed DSC.  Shall 8.5 DSC be uninstalled everything first?

Thank you

Tom

Hi Tom,

This means that your installation is corrupted and some components SQL do not settle down with it. I would advise to uninstall completely and then put it back using the installation CD you have. I hope this helps.

Gregory C.

Tags: NI Software

Similar Questions

  • You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

    Ideas:

    • You have problems with programs
    • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Hi sanjeevkode,

    Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

    VMware communities: http://communities.vmware.com/home.jspa

    In the meantime I suggest you try these options / methods

    IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

    Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

    Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

    Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

    Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

    The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

    Let me know if it worked.
    Hope it will be useful.

    Thank you and best regards,
    Vijay K - Microsoft Support
    Visit our Microsoft answers feedback Forum and let us know what you think.

    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • Windows search Windows failed to start the service on the Local computer

    OK, so it's a big, dirty and convoluted issue, so please bear with me. Any help is greatly appreciated! I start tearing my hair out on this one...

    I'm on Windows 7 Professional 64 bit
    UAC is set to the lowest level 2

    The other day I have problems with the search box in the start bar. It is more was to find excel or other office applications and also he wouldn't orders base as cmd or Notepad. Whenever I run a command it returns an error like this (not exact because I have the exact error message):

    Windows cannot find ': search query = cmd'

    I searched a little and tried to rebuild the index in Control Panel > Indexing Options. It does not work so I uninstalled Windows Search and reinstalled. What I found now, is that the indexing service would not start and if I tried manually start from services.msc I would get the following error:

    Windows search Windows failed to start the service on the Local computer
    Error 161: the specified path is not valid

    The event log showed me this Application error:

    Cannot initialize the Gatherer service.

    Details:

    The Temp folder is on a drive that is full or inaccessible. Free space on the drive or verify that you have permission write to the Temp folder. (HRESULT: 0 X 80070660) (0 x 80070660)

    Help!

    Thanks Samhrutha.
    Your proposed solution of editing the registry is the only solution I found to this day and still work.
    The only drawback that I want to emphasize is that this fix causes completely reset to its default settings of windows search.  Customizations to search what have been done by the user (e.g., windows search indexing user customizations options) will be lost.

    I am running Windows 7 Pro 64-bit and occasionally experienced the same error message ( windows cannot find ': search query = XXX ", where XXX corresponds to my search query) try to search through windows when start menu search box.

    Only recently, however, discovered one other cause possible/fix to this problem.
    Specifically, I discovered that the error of windows search resulting from the ADDITION of a NETWORK LOCATION on the local computer (for example, via the menu option "Add a network location" that appears when you click the file menu in a window of windows Explorer displays the contents of the local computer (corresponding to the "COMPUTER" icon). The CENTER of my computer SYNC settings have been defined to disable the synchronization of network or file 'offline' and I suspect that this setting is also part the cause of the error of research.

    To resolve this problem, simply tell windows search not to include the 'network' location in the search index.  To do this, one needs to access the settings of the windows search INDEX LOCATIONS (via Indexing Options-> change), then uncheck the box next to the network location (which on my computer starts as follows: oneindex: / / {s-1-5-21...)

    After unchecking this box, click on the OK button and then CLOSE the button to exit the Options of Index window.  After that the error message should hopefully not return.  If so, try restarting the computer and research to test again.

    Hope this helps!

    :)

    ~ rx

  • Get the error 'windows' failed to start the spooler service on local computer, error 1075 printing when you try to install a printer.

    Hi, printer "spooler".

    IM using widows vista, I had a problem installing my printer, can not install because that the problem with 'spooler service', followed the advice of microsoft and went to services, a window apears, "windows could not start the spooler service on local computer, error 1075 printing;"the dependency service does not exist or has been marked for deletion"can help you please?

    Hello pedro,

    We will remove and reinstall the printer:

    1. remove the printer from the PC.

    2 uninstall the printer from the PC driver.

    3 reinstall the printer driver.

    4 reinstall the printer.

    Also, here are some links about printing reference:

    Open the printer Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    Why can I not print?

    http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

    Find and install printer drivers

    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  • DRM - failed to start the Service Local DRM error "access denied."

    Hello, I am a newbie of base to the use of DRM. On my pc WIN personal 8.1, I updated to version 11.1.2.3 DRM. The DRM 11.1.2.2 version has been downloaded yesterday and the Local Service of the DRM has been able to start without problem. However, after update today, I am unable to start the Local DRM Service due to an "access denied" error. Any pointers/tips on how to fix? I'm sure it's an easy resolution but I have searched the internet / this blog/documentation without success. Thank you for your time and please let me know if you need additional information.

    Kind regards.

    Understand my own question. When I ran the installer, logged as an administrator does not cause the installer must be run with administrator privileges. I must explicitly run it as an administrator. Rookie and DRM error error disappears once the installation has been completed.

  • "Windows failed to start the service on Local computer print spooler. Error 1068: the dependency service or group could start. »

    I fiddle with my startup programs and now I have this error message: "Windows could not start service on Local computer print spooler.  Error 1068: the dependency service or group could start. "There is no printer listed everywhere and nothing works.

    Hi Jkoryzna,

    Thank you for choosing the Microsoft Answers forum.

    To solve the problem, fix the dependency for the spooler service information.

    Click Start, run and type the following text:

    CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

    Alternatively, to achieve this by using the Registry Editor:

    Click Start, run and type Regedit.exe

    Navigate to the following branch

    HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Services-spooler

    In the right pane, double-click the DependOnService value

    Delete existing data and then type RPCSS

    Close Regedit.exe.


    REGISTRY WARNING

    Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

    Navigate through the steps mentioned in the article below.
    Solve printing problems by resetting the print spooler.

    http://support.Microsoft.com/kb/2000007

    Let us know if this helps

    Concerning
    Anthony.

  • Failed to start the service of bluetooth - BTTRAY ERROR stack

    BTTRAY ERROR: since I bought microsoft bluetooth notebook mouse 5000 I get this error whenever I start up my computer - anyone able to help - I'm on win 7 64 bit pro - very frustrating - I don't know yet if there is a microsoft driver problem!

    I suffered from the same problem. Yesterday, I found this site. I downloaded the software. I think it works. Try it and let me know!

    http://www.Broadcom.com/support/Bluetooth/update.php

    GL

  • I got code 80070426 when I try to update my windows vista professional. I tried to start the sistem but I couldn t. An error pops up: "error 0xc004e002, Woindows cannot start the service. What can I do about it?

    Please your help!

    Hello

    It's the usual correction:

    Windows Vista 0 × 80070426 Activation Service not started or Validation not genuine error
    http://www.tipandtrick.NET/2008/Windows-Vista-0x80070426-activation-service-not-started-or-validation-not-genuine-error/

    ---------------------------------------

    You can try to run these to see if they help.

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058
    Description of the update for Windows Vista and Windows Server 2008 system preparation tool
    http://support.Microsoft.com/kb/947821

    --------------------------------------

    If necessary to start a free incident report:

    Click-> Windows Update fails while searching, downloading or installation of updates
    http://support.Microsoft.com/GP/wusupport#tab3

    and follow the instructions.

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • DCOM got error "% 1084" try to start the service EventSystem with arguments "" to start the server: {1BE1F766-5536-11 D 1 - B 726-00C04FB926AF}

    How can I fix this error and what it means?

    Hi GabrieleHohn,

    1. when exactly you receive this error message?

    2. have you done any hardware changes or software on your computer before this problem?

    Please provide us with more information about the issue so that we can provide you with the necessary assistance.

  • Windows could not start the service on the Local Computer Security Center. Error 1068: The dependency service or group could not start

    I use Windows 7 Home Premium
    My windows Security Center cannot be started. I spent to the Microsoft Management Console and tried to launch security through Services Center, but when I do I get the following message is displayed:
    "Windows failed to start the service on the Local Computer Security Center.
    "Error 1068: the dependency service or group could not start"
    Help, please.
    Thank you.

    Hi Rohit Chettri ,

    (I am not good in English)
    I am trying no operation troubleshooting you mentioned. I have it set for myself.
    I clicked on something related to the denfence in the heart of the action and when I restarted my computer is off almost all services. I couldn't even connect to the internet
    I went to the Configuration System (msconfig)-> services-> active tab all services and restart. After that my computer works normally.
    In any case thanks a lot Rohit Chettri.

  • Error 1068: the dependency service or group failed to start and failed to start the remote access connection manager service.

    Original title: Windows could not start the service of connection manager on the local computer remote access

    amplifier

    Windows could not start the service of connection manager on the local computer remote access

    Error 1068: The dependency Service or group could start.

    Hi sunelchandraoli,

    1. when exactly you receive this error?

    2. you remember to make changes to the computer before this problem?

    Step 1:

    "Make sure that all the services of the dependence of the"Remote Access Connection Manager"" are launched in the list of services...

    a. Click Start, type services.msc in the box start the search.

    b. select Services from the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue

    c. right click on the Remote Access Connection Manager service and then click Properties.

    d. under the general tab, click Manual next to startup type.

    e. under the general tab, click Start under the service status and then click OK.

    f. also check for long-term services.

    The dependency of 'Remote access connection manager' services include:

    i. secure Socket Tunneling Protocol Service

    II. telephone

    III. Plug-and-Play

    IV. Remote Procedure Call (RPC)

    c. of DCOM Server process Launcher

    VI RPC end point mapper.

    Make sure that the above services are started in the services list. If this is not the case, start all services above and check.

    Step 2:

    You can also try a system restore to a prior restore point you have been affected by the issue.

    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    To run the system restore, you can consult the following link:

    System restore

    http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

    System Restore: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

    Hope this information is useful.

  • Failed to start the computer over HTTP: Error 1000

    I'm testing an upgrade from version 2.9 to 2.10 so I can upgrade our 6.0u2 ESXi hosts to solve the problem of multiple appstacks slow attachment.  However, I get this error on half of my offices.  I tried both 2012R2 and for the administration server 2008R2.  It is installed with local SQL.  Desktop computers are Windows 7, floating pool linked clone.  Looks like that in the beginning it shows a "HttpInitializeRequest: status response 200 Manager (2 bytes) ': OK ' but try again"computer startup on HTTP failed: Error 1000 ".  Once virtualization fails is disabled and no appstacks cling.

    I have logs from two desktop computers, a successful failure:

    In case of failure:

    [19:24:58.937 2016-03-25 UTC] [svservice:P828:T856] OnCreateSession called (CF 000000000036, 50, Params 0000000000F6E840, context 0000000000000000 manage the ID from Session 1)

    [19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Computer (Microsoft format) UUID: F6A62A42-87FE-778B-EA05-F56BBADBCD04

    [19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Computer (VMware format) UUID: 422aa6f6-fe87-8b77-ea05-f56bbadbcd04

    [19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Initialize the HTTP session

    [19:25:01.871 2016-03-25 UTC] [svservice:P828:T312] Initialize the HTTP connection

    [19:25:01.871 2016-03-25 UTC] [svservice:P828:T312] Shuffing 1 Manager (s)

    [19:25:01.892 2016-03-25 UTC] [svservice:P828:T312] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

    [19:25:01.921 2016-03-25 UTC] [svservice:P828:T312] Seed URL: / pre-startup? name = svservice & to uuid = 422aa6f6-fe87-8b77-ea05-f56bbadbcd04 & to status = 0 & osver = 6.1.7601 & to sp = 1.0 & suite = 256 & product = 1 & to arch = 9 & proc = 1 & to agentver = 2.10.0.871U & area = SOCIETY & to workstation = AV210TSTPA01 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

    [19:25:01.921 2016-03-25 UTC] [svservice:P828:T312] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

    [19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0

    [19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] HttpInitializeRequest: Response Manager status 200 (2 bytes): OK

    [19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] LogonMount: agent: 0 Manager: 0 or to attach the volumes

    [19:25:02.347 2016-03-25 UTC] [svservice:P828:T312] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

    [19:25:02.358 2016-03-25 UTC] [svservice:P828:T312] Computer start URL: / computer startup? name = svservice & uuid = 422aa6f6-fe87-8b77-ea05-f56bbadbcd04 & status = 0 & osver = 6.1.7601 & sp = 1.0 & suite = 256 & product = 1 & arch = 9 & proc = 1 & agentver = 2.10.0.871U & area = COMPANY & workstation = AV210TSTPA01 & seed = 1 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

    [19:25:02.358 2016-03-25 UTC] [svservice:P828:T312] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

    [19:30:01.666 2016-03-25 UTC] [svservice:312] WinHttpReceiveResponse the timeout of waiting for response

    [19:30:01.666 2016-03-25 UTC] [svservice:P828:T312] Retrying in 5 seconds (expected 300 seconds on 300 max)

    [19:30:06.662 2016-03-25 UTC] [svservice:P828:T312] Abandonment of application HTTP after having exceeded the time limit (300 seconds)

    [19:30:06.662 2016-03-25 UTC] [svservice:312] Failed to start the computer over HTTP: Error 1000

    [19:30:06.662 2016-03-25 UTC] [svservice:P828:T312] HttpComputerStartupThread: failure (starting the computer)

    Successful operation:

    [19:24:58.843 2016-03-25 UTC] [svservice:P820:T852] OnCreateSession called (Session ID 1, 00000000003CFB60, Params 0000000000F4E880 0000000000000000 context handle)

    [19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Computer (Microsoft format) UUID: 72F62A42-0EF6-DBCA-0BE1-DF5682A376C5

    [19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Computer (VMware format) UUID: 422af672-f60e-cadb-0be1-df5682a376c5

    [19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Initialize the HTTP session

    [19:25:01.262 2016-03-25 UTC] [svservice:P820:T560] Initialize the HTTP connection

    [19:25:01.262 2016-03-25 UTC] [svservice:P820:T560] Shuffing 1 Manager (s)

    [19:25:01.265 2016-03-25 UTC] [svservice:P820:T560] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

    [19:25:01.584 2016-03-25 UTC] [svservice:P820:T560] Seed URL: / pre-startup? name = svservice & to uuid = 422af672-f60e-cadb-0be1-df5682a376c5 & to status = 0 & osver = 6.1.7601 & to sp = 1.0 & suite = 256 & product = 1 & to arch = 9 & proc = 1 & to agentver = 2.10.0.871U & area = SOCIETY & to workstation = AV210TSTPA02 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

    [19:25:01.584 2016-03-25 UTC] [svservice:P820:T560] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

    [19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0

    [19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] HttpInitializeRequest: Response Manager status 200 (2 bytes): OK

    [19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] LogonMount: agent: 0 Manager: 0 or to attach the volumes

    [19:25:02.161 2016-03-25 UTC] [svservice:P820:T560] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

    [19:25:02.180 2016-03-25 UTC] [svservice:P820:T560] Computer start URL: / computer startup? name = svservice & uuid = 422af672-f60e-cadb-0be1-df5682a376c5 & status = 0 & osver = 6.1.7601 & sp = 1.0 & suite = 256 & product = 1 & arch = 9 & proc = 1 & agentver = 2.10.0.871U & area = COMPANY & workstation = AV210TSTPA02 & seed = 1 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

    [19:25:02.180 2016-03-25 UTC] [svservice:P820:T560] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

    [19:25:03.111 2016-03-25 UTC] [svservice:P820:T560] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0

    [19:25:03.111 2016-03-25 UTC] [svservice:P820:T560] HttpInitializeRequest: Response Manager status 200 (34 bytes): START COMPANY\AV210TSTPA02$

    [19:25:03.112 2016-03-25 UTC] [svservice:P820:T560] HttpComputerStartupThread: managed (starting the computer)

    [19:25:03.112 2016-03-25 UTC] [svservice:P820:T560] LogonMount: agent: 0 Manager: 0 or to attach the volumes

    Just curious, it's someone else is seeing this with 2.10 and if you have, how solve you this problem?

    If you are using some kind of power management on the VDI? It seems as if the machine is unable to reach the HTTP Appvolumes service for any reason any newspaper which shows success connects withion a fraction of a second if the server doesn't seem to be to busy.

    Maybe you try to join an appstack that has some sort of firewall inside rule?

  • Receive automatic updates for Windows XP "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer»

    Update CPU which proved later to be bad.  Replaced by original CPU.  Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2.  Integrated Service Pack 3 which I got from the MS. site  Everything works well except for Windows Update.  The setting seem to be correct in Administrative Tools/Services.  The status of the Service is "stopped".  When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found."  Also "error 0 x 80240036: could not start the service automatic updates on local computer»  Used the range of anti-virus and malware and found nothing.  Currently using Avast 7.0.1426.  I also used various tools of Fix - It MS nothing helps.  Any help would be greatly appreciated.  Thank you.

    Hello

    1. what application or antivirus security suite is installed and your current subscription?

    2 Norton (another) or a McAfee application ever installed on this machine?

    3. What are the fix applications that you used so far to try to fix this problem?

    Try the next method and check if that helps you with the question of the 127 error you receive.

    Method 1: Rdding the DLL file by doing the following:

    1. Click Start and click Run, in the search box type CMD and press to enter.
    2. right click on CMD in the list and click "Run as Administrator".
    3. type the following command and press ENTER. Regsvr32 msvcp71.dll
    4. close the command prompt window.

    Method 2: run the file system (CFS) Checker:

    (Note: you need an XP installation disk to start the System File Checker search.)

    The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.

    1. click on start, and in the box to start, search type CMD
    2. right click on CMD in the list and click "Run as Administrator"
    3. type the following command and press ENTER. Sfc/scannow
    4. close the command prompt window.

    For more information on scan SFC (System File Checker), please look in the link mentioned below.

    http://support.Microsoft.com/kb/310747

    I hope this helps.

  • The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    original title: The Audio service is not running windows vista

    Hello

    I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    I saw it in Event Viewer

    The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

    Thank you

    -Majid

    original title: The Audio service is not running windows vista

    Hello

    I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    I saw it in Event Viewer

    The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

    Thank you

    -Majid

    These error messages are a pain in the neck to extract useful information.

    I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

    If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

    Realtek and NVIDIA, for example get stuff good free audio driver.

    If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

  • Error 1079: Windows cannot start the Diagnostic Policy on Local Computer Service

    Windows cannot start the Diagnostic Policy on Local Computer Service?

    Original title: error 1079

    Hi Craig,.

    Thanks for posting your question in the Microsoft Community.

    From your post, it seems you are getting and error 1079.

    The problem may occur if the service is started by the Local System account instead of the Local Service account (NT AUTHORITY\LocalService). The Local System account may have sufficient permissions to start the service.

    What service are you trying to start?

    We will follow the steps in this link and check if this solves the problem.

    Services do not start, and you receive an error 1079 on a computer that is running Windows Server 2008, Windows Vista, Windows 2008 R2 or Windows 7

    Thanks for posting the result and let us know if you need help on Windows.

Maybe you are looking for