DSC - event trigger for single shared process Variables

Hello

I understand how to set up a Notification of change of value for published network Variables shared so that an event fires when this particular shared Variable changes. However, I can't understand how to do the same for the single shared process Variables. Is it still possible? Can someone shed light on this point, please?

Thanks in advance.

-James Pham

VRspace4,

Hello! It is not possible to activate alarming for unique shared process Variables. A workaround to set up a Notification of change of value would be to create a network shared variable that reads in your Variable single process, but at this point in time, it could be useful that replace your variable with a variable that is shared on a network.

Tags: NI Software

Similar Questions

  • How can I create an event listener for the change of variable shared or similar?

    Hello

    I have a 'big' 6 devices communicating measurement system via the TCP protocol. The system is designed to use REST (the representative State transfer) with JSON (JavaScript object notation).

    Now, I need to add labview program to this environment. I've implemented a solution to 'work' with the help of this forum. Thank you for this! Now, I need to do better (currently no timestamps, large delays, etc.).

    I currently have a web service deployed using http-get as input. My web service .vi is just passing the web entrance to shared variables that are then questioned in real measurement program. Reason is that when I put the measurement program directly to the web service, it does not (something about rights and dependencies). Measurement program includes one third of the owners (Instron) drivers. Also I would not direct access via the network to our mechanical testing device potentially dangerous.

    Now, I want to change the message from the web services .vi commensurate .vi. Currently I have a loop of 10ms to query for changes in the shared variable. Is there a better way to do this? I thought create a listener to the shared variable change events.

    In addition, if you have any ideas (preferably, working code example) how to make the interface between labview and TCP-JSON I would really appreciate it.

    BR,

    Juha

    Currently in LabVIEW, the only way to create an event listener or event NSV is to use the DSC toolkit.  Most of the time the DSC is a very expensive tool that simply encapsulates the functionality that is built into the motor of the PSP and OAS and which is accessible to anyone who can program in LabWindows/CVI.

    http://zone.NI.com/reference/en-XX/help/370051P-01/CVI/libref/cvicnvcreatesubscriber/

    If you want to collaborate, I would like to create a small library of LV that would create a base SV events using a vi LV reminder or possibly passing return user LV event which is how works the DSC toolkit.  I asked OR several times to explain how do this and they're very tight discreet about it.  I guess that they do not want to give users LV less reason to buy the DSC.

  • Programmatic process single shared Variable access

    Hello

    I was wondering: is there a way to access the shared process Variables Single using the API similar to the shared network SV programmatically? It would be a handy feature and this post suggests there are:

    https://forums.NI.com/T5/LabVIEW/programmatically-select-global-variable-object/m-p/1855565#M631304

    But I couldn't find any example or to be used as 'link to Variable.

    Thank you!

    Ehrlich wrote:

    Thanks for testing! It is a pity that this feature only works for shared network variables (which, in my case, are too slow to be used), would be really useful also for the process unique ones.

    If you do not look for published network, then you should really take a look at the table of the current value (CVT).  It is a way of defining and excessing variable by name.  Developed by systems engineers NOR and available for FREE on the LabVIEW tools network.

  • Global variables or shared unique process variables?

    Normal
    0
    21

    fake
    fake
    fake

    MicrosoftInternetExplorer4

    / * Style definitions * /.
    table. MsoNormalTable
    {mso-style-name: "Table Normal";}
    MSO-knew-rowband-size: 0;
    MSO-knew-colband-size: 0;
    MSO-style - noshow:yes;
    "mso-style-parent:" ";" "
    MSO-padding-alt: 0 cm 0 cm 5.4pt 5.4pt;
    MSO-para-margin: 0 cm;
    MSO-para-margin-bottom: .0001pt;
    MSO-pagination: widow-orphan;
    do-size: 10.0pt;
    do-family: "Times New Roman";
    MSO-ansi-language: #0400;
    mso-fareast-language: #0400;
    mso-bidi-language: #0400 ;}

    Given that the
    introduction of shared variables, whenever I needed a global variable, I have
    use shared unique process variables. But I started now return to
    using the old global variable because I think that there are some significant drawbacks
    to the single shared variable. Here is the ability to search for
    case of variables and also the ability to view or change the value of
    the variable (OK, we have the variable Manager, but I found slow and)
    unstable). My question is, are there reasons to use the new single
    process variable actions on old global variables?

    Dear Terje,

    As you use only the variables on a single system. There is no advantage to the use of unique process shared on Globals variables.

    Infact a global variable uses a little less processing power that a global variable as the implementation of a shared variable single-pocess effect is a global variable with the timestamp feature.
    If you use a shared variable single process, if you don't need the timestamp feature, then disable it to use less processing power.

  • Shared a Variable trigger

    Hello all, I have two projects (one is 64 bit LV, the other is in 32 bit LV) I run by-side on the same machine. The 64-bit project control a camera, and the 32-bit calls code to perform processing. I would like to send a trigger to make the 64-bit program wait until some of the raw data buffers are processed before sending more data for the 32-bit project. Unfortuantely cannot recomplie the code for 64-bit processing.

    Is there a good examplse to do? I was thinking about using some kind of shared variable configuration, but I don't really like shared variables.

    Thank you

    You can send commands via tcp/ip for different processes, e.g.

    Shared variable network is probably a little easier, but not much.

    /Y

  • Cannot start Windows Virtual PC host process. Check the log of the events system for more details

    Hello

    I am running Win 7 Home Premium 64 and seek to install Windows XP Mode Virtual PC.

    I followed the instructions at: http://www.microsoft.com/windows/virtual-pc/download.aspx and receive the following:

    "Windows Virtual PC. Cannot start Windows Virtual PC host process. Check the log of the events system for more details".

    He does not point me to the "system event log", but he leaves me here. Any advice?

    Thank you

    Hello

    Ideally, this error message indicates that your processor does not support the against hepatitis a (hardware support for virtualization)function.

    Cause:

    Windows Virtual PC and Windows XP Mode are supported only on computers whose CPUs are the HAV feature is enabled. Therefore, if your processor does not support the functionality of HAV or if this feature is disabled, you cannot start the virtual machines in Windows Virtual PC.

    To resolve this problem, follow the steps mentioned in the link below

    Error message about Virtualization-aided material for Windows XP Mode in Windows Virtual PC on a computer that is running Windows 7

    http://support.Microsoft.com/kb/977206

  • Get an instance of a single process to another process variable

    Hi Dan,.
    I read some time there is a thread where you said that you have code samples to get an instance of a process to another process variable.
    I tried to do, but I'm not able to do.
    I tried with Instance.getVar, which returns an object, but I can't get to my Bpmobject.
    Can send you the code to achieve this?
    Thank you very much in advance
    Kind regards

    Hi Ruben,.

    Sorry - Notification with the Iterrupt is the only way I know too.

    Dan

  • Regulator PID very slow to reach the value Point and zeros process Variable when it should not

    Hello

    I am using a PID controller to regulate the emission of a filament current in an ion gauge, but I'm running into several problems.

    The first and less important, are the controller of PID VI takes at least 5 minutes to get the current where it needs to be.  Is it possible to speed this up?

    The second and more important, are that the PID controller tends to zero the process variable before you start the process of getting the close process of the target value variable.  This can be seen in the attached VI: I write 5.8 volts voltage filament - something I did at the beginning to try to get the controller PID for the process close to the target faster - value variable but when the PID controller starts to do his thing, he kills the tension before anything, rather than rise of 5.8 V.

    The attached VI is a single which has these problems.  VI actual ion gauge controller I've written has the same problems, but in a form even more frustrating.  I have a while loop set up for the filament voltage to where it should be (using a PID controller) first and foremost, then a loop of data acquisition, which also includes a feedback loop in the form of a PID regulator to maintain the filament voltage.  When the second PID controller starts to run, it concentrates the tension that the earlier had set, taking another 5 + minutes to reach the point where we can take data and giving us 5 minutes of false data in the process!

    Does anyone know why PID controllers are behaving like this, and what can I do to fix/work with this behavior?

    Hello

    It seems that PID VI will always be 0 for the first iteration. You can, however, use the advanced PID VI and set up the first iteration in manual mode. After subsequent iterations, you could then define this automatic mode and there will be a transition smoothly. I think this will give you the desired behavior.

    -Zach

  • Sharing of Variable crashing LabVIEW

    It's just one of those projects that has a wall of brick in each round so far. Two computers running LV2009. Computer A hosted data write sharing Variable. Computer B shared reading Variable data hosts. Reading data is linked to write data. Everything worked fine, and then yesterday afternoon, I don't think I changed anything on the shared variable, I start my VI on the computer B and LV crashes. The VI begins to run before the first performance for reading data, and then poof, everything open in LV disappears. Since then the problem is reproducible 100 percent.

    Here's what I know:

    1. an error indicator hooked to reading data watch-1950679034 (shared Variable has no value) for about a second before the accident. Everything stops execution as soon as the warning.

    2. writing of data is a single editor, but it is also sometimes read in VI it is written in. It is not read when the accident occurred. I can however perform playback on computer A without incident.

    3. don't know if this is related, but if I open the VI on computer B and then open the project, I am not able to drag data reading of the project on the block diagram. I also cannot perform operations on the shared Variable (as right-clicking, ignore the timestamp). I have to close the VI and reopen the project. In retrospect, this problem might have started when I opened the VI without opening the project.

    I'm torn between abandoning the shared Variables and try to understand it. I would definetely prefer to use the Variable shared, mainly because I need a buffering. I guess I can put other things buffer. Don't know if I can remote access to a queue, or...?

    I was able to reproduce the crash that you see with extreme simplicity VI in LabVIEW 2009.  This looks like a bug in LabVIEW, so I'll check if there is any of this behavior already.

  • reconnect the stall network of shared network variables

    I have a cRIO unit communicates with a laptop using shared network Variables, one of them being a table of 21 index which is buffered.

    The system connects and communicates very well, but sometimes the wireless laptop card is to lose the signal from the WAP, attached to the cRIO.

    In this case the network never shared Variables "reconnect" and start to receive values still once the wireless link is restored.  Is this expected behavior?

    When I tried to use other WAP industry instead of the card laptop wireless, I get no abandonment.

    Hello Ryan,

    Please contact National Instruments!  I looked into the problem you are having and I wanted to ask you a few questions more.  First of all, you have a period of time which allows the reconnection?  I believe that the Shared Variables should find the connection after a short period, but it may not be a very quick process.  It may take a few minutes to the Variables shared to reconnect.

    The other thing that could happen is if you have error son being passed by shared Variables, it is possible that the error is not be deleted, and so he will always see the error and not a so never reconnect.  In this case, you will need to filter this error and then clear the error in order to use again shared variables.

    If you have more specific information about your program that can help us to determine the reason for this behavior.  As a screenshot of your code would be useful.  Please let me know if you have any other questions and I'll be happy to help you.  I hope this helps!

  • Failed to initialize for the logon process

    My phone displays the following message when I turn it on (the screen is black, but this message shows): failed to initialize for the logon process
    The interactive logon process initialization has failed.
    For more details, please see the event log.

    Clicking OK doesn't do nothing, the message just keeps reappearing.  I tried stopping and starting Windows up in Mode without failure.  The message appears in Safe Mode, as well.

    Hello berniesun,

    You can give the Startup Repair to try to clear this error. I've included the steps located in the help section on all versions of Windows Vista. If you want to print these instructions for yourself, you can go to help & Support in the Start Menu and type the Startup Repair in the top search box.

    Check back with us and let us know if this solves your problem.

    If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

    If you have a Windows Vista installation disc:

    1. Insert the installation disc.

    2. Restart your computer.

      Click the button start , click the arrow next to the button lock , then click on restart.

    3. If you are prompted, press any key to start Windows from the installation disc.

      Note

      • If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

    4. Choose your language settings, and then click Next.

    5. Click on repair your computer.

    6. Select the operating system you want to repair, and then click Next.

    7. In the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

    If the Startup Repair tool is an option of recovering preinstalled on your computer:

    1. Remove all floppy disks, CDs and DVDs from your computer and restart your computer.

      Click the button start , click the arrow next to the button lock , then click on restart.

    2. Do one of the following:

      • If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

      • If your computer has more than one operating system, use the arrow keys to select the operating system you want to repair, and then press and hold F8.

    3. In the Advanced Boot Options screen, use the arrow keys to highlight repair your computer and press ENTER. (If repair your computer is not listed as an option, then your computer does not include startup as a preinstalled recovery option repair).

  • Select a keyboard layout, and then click Next.

  • Select a user name and password, and then click OK.

  • In the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem and, if necessary, it may restart your computer, because it makes the repairs.

  • Judd
    Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Return TopCPU process variable rule data

    I try to customize the rule runaway_process and have some difficulty to retrieve the values of the data model. The goal is to have an email sent when this rule fires for some hostnames. The scope was pretty easy, but get the values of process variables to be included in the e-mail message is a challenge.

    The rule is defined in the TopCPU table and below that is Process_TopCPU. Can I return the latest value data there with:

    Server.get("DataService").retrieveLatestValue (Scope, "Process_TopCPU"). GetValue()

    However, this seems to return the rows in the table of 5 albums processes. I want to return the details (order, Pct_CPU) from the top of the page process only and looks like you have to go a little further below and pull data from Process_TopCPU_Entry. I do not understand how to return these individual values but... can anyone help with this?

    The difficulty here is that the Observations are so-called Observation complex (several processes CPU high of perception at any time)

    The following Scriptlet will work (assuming you reach on the host object.)

    It will search all ALBUMS of Cpu processes in the current collection that correspond to a specific filter criteria and create a string that contains name and uses CPU for each of them. I hope this will help you to build your own version for your use case.

    // Define the filter closure. you could do this inline but I like to declare this on it's own section for readabillitydef filter = { processEntry->  return processEntry.cpuUsage > 0.03}
    
    // use teh find Observation entries function which is part of the Foglight core functionallity and filter for Processes that use more then 2% CPU in my casedef entries = findObservationEntries(#topCPUProcesses from $scope.cpus#,filter)
    
    // Header def msg =  "Processes with high CPU Usage :\n"
    
    // create a single line for each process using a GString templatemsg += entries.collect{ "Name: $it.command  cpu: ${it.cpuUsage *100} %"}.join("\n")
    
    // return the message return msg  
    

    I've also attached a screenshot which describes the function used

  • What is the trigger of the IOM process?

    What is trigger in IOM process? Please explain briefly? How to create the trigger custom?


    Thank you

    What is the trigger of the IOM process

    He decided to "what tasks must get triggered on the evolution of the field in the IOM user profile." Logic is already implemented in IOM and this requires a small configuration to add new triggers.

    Just to add a little thing in the commentary of Suren:

    You will find entries as in the research

    USR_LAST_NAME - Name of the task (task any name)

    It means so whenever there is change in the user's last name (USR_LAST_NAME) in the IOM then it will trigger all these tasks that are mapped in the search. You can have more than one task for the same domain.

    USR_LAST_NAME - Task1 (any task name)
    USR_LAST_NAME - Task2 (any task name)

    Suern shared the steps for the creation of new triggers.

  • PID control with big delay in the process variable

    Hello

    My goal is to control the temperature via a valve and heat exchanger. I proceeded variable (temperature) measured from a hose. This temperature should be raised a few degrees with a heat exchanger. So basically I need to order a valve that allows the water to flow through the heat exchanger to raise the temperature to the desired level.

    My original plan was to use a base PID regulation to operate the dispenser. However, it is about 0.5 to 1 minute of delay time in the temperature probe after I opened the valve, which increases the temperature. This leads to a situation where the PID regulation valve fully open during this period (trying to get the temperature rise). Then once the temperature begins to rise it fires quite quickly. PID begins turning the tap off almost immediately, but because of the time delay in the sensor, the temperature exceeds seriously. This led to severe oscillation and at worst unstable processes. I tried to adjust the PID control to "predict" the timer to close the valve in advance to minimize the excess, but failed.

    I would appreciate if anyone has any ideas how to make this type of control with Labview PID functions. I also wonder if there is a better type of control procedure for this scenario as a PID control?

    -Lars

    This is a very common situation in the heating control, and generally PID can be adjusted to make it work. How do you do the tuning? If you do it by trial and errors, you have little chance to succeed. For a slow process with time delay, I like to use the method Cohen Coons, or similar open Ziegler-Nichols-loop method. The idea is that you temporarily remove or disable the PID. Set the valve in a fixed position and wait for the temperature to stabilize. Then, change the setting of the valve and record temperature at regular intervals data until the temperature is stable again to a new value. Use these data to get the initial values of PID using the equations provided by the tuning method you choose.

  • Sharing of Variable error-1950679023 in LabVIEW 8.6.1

    Hello

    Is anyone else having problems with this error after installing LabVIEW 8.6.1?

    Programs using variables shared that I wrote (and worked), just in older versions don't seem to work.

    Kind regards

    Sarah

    Hi Sarah,.

    Good afternoon and I hope that your well today.

    Sorry for the delay...

    I've did some more research and found that there is a patch for LabVIEW 8.6.1 and variable - could this be the cause of your faceing...

    Link: http://joule.ni.com/nidu/cds/view/p/lang/en/id/1255

    "This is an update to only LabVIEW 8.6.1 solve a problem when the variable path related is incorrect after variable deployment."

    You don't seem to have proved the issue about outside of your code - I go to the update being installed and not the goal of the solution to reproduce your problem.

    Finally, please run - but do not uninstall! the attached MSIBlast tool. It will list all the packages OR (Packages MSI) installed on the machine. Please note that the list should include,

    Client Variable nor to RT + versions Supprt

    Support for versions + OR motor Variable

    Variable Manager OR

    ... to name a few.

    I would be interested to know if they appear in the list,

    Hope this helps,

Maybe you are looking for

  • How to change and maintain power

    HelloI spend in 'true' an indicator using an OK botton. I want that when I press the botton for the first time my indicator is set to 'true' and remain 'true' forever, regardless of the status of OK botton... How can I do? Thanks in advance GM

  • several series connections

    I have a running program that has three serial ports and a GPIB connection. For this reason, I have sons of visa running all over the place. Is it possible to organize it so I don't have tons of these threads that runs through my program and I can do

  • How to upgrade a shift with two independent loops while register?

    Hello everyone, I have a panel with two clusters with indicators control... a left and a right. I have messages from serial port, and I'm currently updating the left and the right within their own while loops. I have a single variable, which must be

  • Problem of broken links

    Can anyone help? Whenever I try to open a link I get the following error message: "error 102 (net: ERR__CONNECTION__REFUSED)": unknown error. "" The Internet site at: _ may be temporarily down or it may have moved permanently to a new web address. "I

  • Slow down the first print Page

    HP Officejet 5610 all-in-One printer;  Win 7 Home Premium 64-bit When I print multiple-page documents in a project framework, the first page of the printer is very slow, 60 sec. +.  The following pages are at a speed I know is a parameter "print proj