DSC - h3, and memory stick duo

my daughter gave me his camera which was almost never used... so it is almost brand new, but it's obsolete. It is not a memory stick duo with her, and they are not available in the store. is the memory stick duo pro compatible? If this is not the case, I can use? No matter what?

Yes, you can use a Memory Stick Pro Duo with capacity of up to 32 GB. More information on compatible Memory Sticks for the camera can be found in this link.

If my post answered your question, please mark it as "accept as a Solution.

Tags: Sony Products

Similar Questions

  • Satellite Pro P100-327: memory card reader does not read the Memory Stick Duo

    I just received a P100-327
    aShop http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=UK&PRODUCT_ID=121991&Toshib = true)
    According to this page, is supposed to have "1 x 5-in-1 Bridge Media slot (supports SD Card, Memory Stick®, Memory Stick Pro, MultiMedia Card, xD-Picture Card)", but the pdf manual that comes with it says that it supports not the Memory Stick Duo, Memory Stick Pro Duo or mini-SD.

    However, I have a Memory Stick Pro, and a Memory Stick Pro Duo in a Memory Stick Pro adapter, and the reader can't read one of them (they both count as Memory Stick Pro, which should be readable, right?)

    Would I be able to read my Memory Stick Pro cards? Why I can't because it says that I should be able to? Should I install something first?

    Hello

    To my knowledge and according to the manual of bridge housing media supports media type
    -SD memory card
    -MultiMediaCard, xD-Picture Card
    -Memory Stick
    -Memory Stick Pro

    Please note that the Memory Stick and Memory Stick Pro are not the same in the Memory stick Duo and Memory Stick Pro Duo.
    Don t mix.

  • A Qosmio F10 read Memory Stick Duo Pro card does

    I have a memory stick duo pro 512 MB in an extension of memory card stick (case making it a full size memory stick)
    I can read the card on an external memory card adapter, but not as part of the internal drive?

    I think I have the latest drivers, but can be difficult to install in the right place, I can read the cards not pro using the same set up. How to read what the Pro cards on the internal card slot which driver should I I downloaded from the forum?

    Clues please!

    Hello

    I think that it of not possible to use the Memory Stick Duo Pro card in the internal drive.
    As far as I know, you can't use every SD card with the Toshiba unit.
    You should check the manual for this laptop. You will find information what SD cards are compatible and supported on this laptop.

    Good bye

  • Qosmio F30 - 141 Memory Stick DUO / card reader problem

    I have a problem with the Memory Stick Duo Adapter/Memory stick PRO DUO card.
    Computer does not recognize volume. Unit Memory Stick appear in the system, but when I click on it in the Solution Explorer, computer say "insert the disk in drive E". I have the original card Memory Stick PRO DUO 2 gb and MS Duo adapter. 30 sec computer try plug this card.

    Computer properly operate with the Memory Stick Pro 1 GB card and Memory Stick M2 card 1 Gb with adapter M2.
    all this work cards in my Photo and on another computer.
    I am trying to connect this card to Sandisk 6 in 1 adapter PCMCIA, but in this case, no one card works.
    This device appear in IDE ATA/ATAPI controllers like '___Memory_Card_Adapter_II', but the driver for this device is not installed (KODe 28).

    Thanks for the wonderful world of the internet for this info:
    F30-141 does not support memory stick pro duo and adapters has not been tested.
    I'm afraid that also use adapters of doesn't help.

    I bought an external card reader. It s a small device and was very cheap and the best is that this external card reader takes in charge most of the maps ;)

  • Multi-card reader don't like to give back the cards Memory Stick Duo Pro 23 Pavilion all-in-one

    I want to just make sure I don't do something wrong.

    When I plug it into a SD card seats when inserted about 2/3 of the way into the slot and I can easily put my fingers on it to remove it when it's time to take it out.  When I plug the Memory Stick Duo Pro that is not recognized until it is at least inserted 9/10 and I can push completely rinse with a case and am not sure that it has bottomed out or not.  It works fine, but now it is not removable without the use of pliers tweezers.

    Is this normal behavior and waited for the mult card reader integrated into 23 all-in-one Pavilion?

    I have a more than adequate solution.  I plugged in the little USB card reader that accepts MS Pro Duo in their own homes. This post is therefore more closely to ensure that I'm not missing something obvious.

    My guess is that the drive or the motherboard was designed for the case to be a little closer it is.

    Hello @MarksPavilion,

    I understand that you have problems, remove the Memory Stick Duo Pro card reader that he will not jump out far enough to catch. The problem you describe seems to be a physical problem. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.

    I want to thank you for display on the HP Forums. Have a great day!

  • Satellite A200 - adapter memory stick duo work?

    Should this combination work?
    Portable satellite A200 - 14 d and on memory card reader memory stick duo 1 gb with memory stick duo adapter.

    Say the user manual?
    Have you checked it?

  • Satellite Pro A100-622 can not read the card SD and Memory Stick with Windows Explorer

    I have a Satellite Pro A100-622 running MS Vista Home Basic Edition. I tried to use the card reader integrated with SD and Memory Stick card but cannot view the contents using Windows Explorer.

    In both cases, the laptop recognizes the card and try to install new hardware. Unable to do so, he asks the drive of the software provided with the cards. Any software not provided with a card and I cannot find drivers to make the drive work.

    The only application that I can find on the laptop that is associated with the player is a module of SD formatting, but I don't want to format the card (s) I want to just read the current content of them and add files.

    Any ideas?

    Hello

    You can download the drivers (and especially in your case for the sd-card-reader) here:

    http://PC-support.Toshiba-Europe.com/Vista/

    and here

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    So the other point is the service of the SD card must be enabled in the start menu-> Control Panel (change to Classic view)-> Administration-> Services-> Chip card (at this point, you must activate the service and configure it to start at windows startup).

    If you have any other questions, just ask. ;)

    Good bye

  • Use of adapter Memory Stick Duo in Satellite A200 (PSAE6)

    I have a Satellite A200 (PSAE6).
    My camera have a Memory Stick Pro Duo and I have an adapter.

    But when I try to put the card into the memory, the same adapter card reader it go so deep that I can't remove it without assistance tools.

    So I don't know if my work drive card?

    What I've done wrong?

    Please help me

    Have you checked the manual for types of compatible card?

    Perhaps the Memory Stick is supported, but not the series Duo.

  • Satellite P100: Memory Stick Duo Pro with MSD adapter is not recognized

    When I insert the CSDP in my Satellite P100-473-multi card reader - Vista preinstalled - (using an adapter MSD), the removable media is listed in the Solution Explorer, but the card cannot be read.
    With a 32 MB card, he pointed out that the card needs to be formatted first... but correct data are inside and must be visible.
    With 1 GB card, it reports that card is first inserted...

    Did anyone experienced this problem?

    Hello

    Have you checked the user manual you?
    Take a look at Chapter 8!
    There is information that the card reader is supported only SD; MMC; MS; Cards MS Pro and xD.

    As you can see that it supports the Memory Stick Pro, but not the Memory Stick Pro DUO!

  • Re: Error in reading Memory Stick Pro Duo

    Hello
    I have Toshiba A200 - 1 M 4
    When I insert the Memory Stick Duo Pro (with the help of the Memory Stick Duo adapter), I get this error message from Windows Vista:
    {color: #ff0000} * you must format the disk into G: drive before you can use it.*
    * You want to format? * {color}

    I put the same card in an another (NOT of Toshiba laptop) and it could read as well.
    And I do not have problems in playback of SD, but just Memory Stick Pro Duo memory cards.
    So what's the problem?
    Please help me
    Thank you

    Hello

    I think that it always useful to take a look in the user manual for additional information on the laptop. :)

    The said Memory Stick user manual * PRO Duo * and Memory Stick * Duo cards or adapters are not compatible with the Satellite A200 series multiple digital media card slot!

    So you will not be able to use this card.
    You'll need to switch to a card that is picked up and compatible with the multiple digital media card slot.

    Best regads

  • I can't print from my stick duo memory Sony on my hp envy 5532 what I am doing wrong? Please

    I have a Sony camera that has a memory stick duo sony and it does not in my hp envy5532 what am I hurt? He used to fit into my printer Epsom ok... help

    Hi!, Puppydoog:

    Welcome to Forum!

    If you have a camera Sony, with Tick Pro Duo memory, you can first of all, with the camera software and connector cable, download for PC, or through one of the card reader, PC (Kingston FCR-HS219/1 or similar). After that, you can copy to the PC with the same card reader, SD card, for use, in your printer, HP Envy 5532.

  • Re: Tecra M10 - BSOD with memory stick pro duo

    Hello

    As a first step, I would like to apologize for my English. I'm not so good at this.

    I have a M10 - 11U (PTMB3E) and Windows XP. When I insert a Memory Stick Pro Duo card to the card reader the system just fall into BSOD and reboot my laptop. It says BAD_POOL_HEADER and something else. But when I insert an SD card works properly. And I think that when I had Windows Vista everything worked well. So I invited, it is in the card reader drivers, but I can't find one that would work.

    What should I do?

    Thanks for your advice.

    Hello

    For memory stick duo pro cards that you must use an adapter, you read. Do you use such an adapter?
    You can find this information in the user manual and it seems that you need an adapter for the memory stick cards.
    Check this box!

    In addition, you can download all the drivers on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  • Memory Stick Pro DUO is not in my Satellite A200 - 1 H 2

    Laptop computer most I want to set up my Memory Stick Pro DUO inside the laptop, but not this one, it can t happen so I tried to put the Memory Stick Pro DUO in one of these adapter Memory Stick DUO that accompany it, and although it does not connect, nothing happens...

    What is c? Why can't t my laptop does not recognize it? Doesn't it support?

    Hello

    I don't know what you mean with most laptops, but it is logical that each laptop producer offers very precise specifications where you can read about the compatible memory cards that can be used with multi card reader.

    Have you checked the user's guides document for your Satellite A200? I don't think so.

  • Satellite M40: Accidentally inserted Memory Stick Pro Duo

    As smart as I am I have not read the sentence about the lack of support for Memory Stick Duo / Pro Duo and inserted.

    Is there a way to get the stick of memory in the card reader?

    Thanks in advance!

    Hello

    If the stick is not removable because she is oblique, open remove it any computer laptop card reader and then try to remove the stick!

    But if you open your M40 you will lose your warranty, so you need to contact a Toshiba Service partner! They are able to remove the stick!

    Good bye

  • Sony memory stick pro duo of

    I recently bought the HP dm4-2070us. works on multimedia port with the memory stick sony pro duo? The adapter not blocking or read the card? Thoughts?

    It does not read the Memory Stick card family and the card on the portable reader supports only the following formats of digital maps-

    • MultiMediaCard
    • Secure Digital card   
    • Digital high capacity Secure memory card (standard and large size)

    If you want to read a memory stick duo pro, just buy a USB that are available for very cheap memory card reader that would be would serve your purpose.

Maybe you are looking for

  • Satellite L850 "Bluetooth is not ready."

    Everytime I try to press "Add new connection" in the BT settings, I get the message saying that "Bluetooth is not ready." Not sure if that makes a difference, but the laptop has recently been repaired and I think that the motherboard and processor ha

  • HP 250 G4: I have a problem with some code BCM43142A0

    Hello. I have some problem. Whe a start to update my software, one is unable to download a driver for Bluetooth. In Device Manager, I see some code BCM43142A0 Can you help me please?

  • PXI-6120 digital output frequency

    Hello before that I have to post my question some technical information: LabVIEW: 2011. IO digital 8 PXI-6120. I read the user manual and search the Forum and there is no reference to the frequency of digital output (only for a meter). My question is

  • dependency service problem

    Hi, I have a laptop Dell Inspiron 1525 (1 GB of RAM) under Vista Home Premium. Recently I can't connect to the Internet using a cable to the router or wireless ethernet. I can connect to the router, but cannot go further. The message I get is "depend

  • Impossible to validate using a phone system

    Separated from this thread. Validate the software tells me I have genuine copy, but still impossible to validate using a phone system. Any help thanks