DTMF codes

Similar Questions

• Lack of pavement on Skype version 4.0.0.7

  Hello

  I'm trying the new version of Skype for linux comes out (ver 4.0.0.7), and it seems impossible to open a numeric keypad during a call, send digital codes needed for certain automatic services

  Someone knew how to do?

  I noticed the keyboard numric icon will appear in the window of appeal if and only if there is at least a phone number in the call. It is a problem because many companies now use Skype Connect, and it is impossible to dial DTMF codes with them.

  I found a very a hack to do this: Add a dummy number (e.g. + 18001234567) to call and tap the front keyboard than the cal to this number. Ugly, but it works!

• BlackBerry smartphones can not send (DTMF) digit code to open the Holy door - Bold 9790

  I get a call from the door intercomm when a visitor arrives. I'm supposed to then "dial" while the call is open to open the door. It worked well for months, but now DO NOT SEND THE NUMBER SOUND.

  There are some settings that must be changed, or has the spirit of darkness decended on the phone?

  Help will be appreciated

  Paul

  Cold, rebooted and solved the problem. No need to answer more.

  See you soon

• DTMF in SIP Trunk problem

  Hello

  I have a problem in case of detection of the DTMF

  We have a SIP of the ITSP Trunk and everything is ok except DTMF.

  The sip trunk is between ITSP and router 3945

  ITSP <->3945 <->CUCM 10.5

  I have try all method such as rtp - nte, h245 alphanumeric and h245-signal, info-sip, sip-kpml,... in line-peer to ITSPs

  ITSP say that he send with standard RFC2833 dtmf (it equals to rtp-net, I know), but when I am 'debug ccsip message', the results show the dtmf with rfc2833 sends us

  16 August 13:52:28.991: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
  Received:
  INVITE sip: [email protected] / * /: 5060. user = phone SIP/2.0
  Via: SIP/2.0/UDP 10.105.40.34:5060; branch = z9hG4bKejhh8jixkobhnb7ykvi87vuj8
  Call ID: [email protected]/ * /.
  From: sip: [email protected] / * />; tag = c3cx3vcw-CC-40
  To: sip: [email protected] / * /; user = phone >
  CSeq: 1 INVITE
  Allow: INVITE, ACK, OPTIONS, BYE, CANCEL, REGISTRY, PRACK, INFO SUBSCRIBE, NOTIFY, updates, MESSAGE, see
  Max-Forwards: 69
  Supported: 100rel, timer
  User-Agent: Huawei SoftX3000 V300R010
  Session time-out: 300
  Min - SE: 90
  Contact: sip: [email protected] / * /: 5060; user = phone >
  Content-Length: 374
  Content-Type: application/sdp
  v = 0
  o = HuaweiSoftX3000 11042757 11042757 IN IP4 10.105.40.34
  s = call Sip
  c = IN IP4 10.105.40.34
  t = 0 0
  m = audio 27762 RTP / AVP 8 0 18 4 2 98 99 102
  a = rtpmap:8 PCMA/8000
  a = rtpmap:0 PCMU/8000
  a G729/8000 rtpmap:18 =
  a = rtpmap:4 G723/8000
  a = rtpmap:2 G726-32/8000
  a = rtpmap:98 G726-40/8000
  a = rtpmap:99 G726-32/8000
  a = rtpmap:102 G726-24/8000
  a = ptime:20
  a = fmtp:18 annex b = No.
  It is a message to guest (with sdp) of ITSP
  As you can see the line with red color must have a code with number of 101 but rather a code with number of 18
  In my "ccsip media debug' output show that the method of negotiation between me and itsp 'incoming voice. '
  It's my router config:
  voip phone service
  No IP trust to authenticate
  allow connections h323 to SIP
  allow connections sip h323
  allow sip to sip connections
  SIP
  interface FastEthernet0/0/1 source control binding
  bind media source interface FastEthernet0/0/1
  min - to 300 session expires-300
  !

  Dial-peer voice 2 voip---> router CUCM and vice versa
  translation-profile outgoing toos
  destination-model 42584...
  session protocol sipv2
  session target ipv4:10.20.30.70
  Codec g711ulaw
  DTMF-relay rtp - nte
  !
  VoIP voice 10 Dial - peer---> router for ITSP and vice versa
  destination-model. T
  session protocol sipv2
  session target ipv4:10.105.40.34
  incoming called-number. T
  DTMF-relay rtp - nte
  Codec g711ulaw
  I have configured cucm with a sip section to my favorite router with active PSG and RFC2833
  BUT HE DIDN'T THERE WAS NO DETECTION OF DTMF IN INCOMING CALLS AND OUTGOING
  I even test dial-position 10 without any method of dtmf-relay because I want to configure it with the incoming voice method, but it does not work
  I change the codec but does not solve the problem
  There is an interesting point and that is, if use Elastix 3945 of the router and configure dtmf among elastix and itsp as "inbound" method and method dtmf among elastix and cucm as 'rfc2833' everything is OK (ITSP<--Inbound--> Elastix <--rfc2833-->CUCM)
  Please give me a solution to solve the problem between Cisco 3945 and ITSP
  Concerning

  It would be more accurate to say that the problem has been bypassed by using a transcoding resource. The correct resolution here would be to open a ticket to trouble with the ITSP. I agree that the PROMPT message you show doesn't include advertising RFC2833 in the SDP offer. It is a problem that only the carrier can rectify.

• Forums CWMS drop after you have entered the code meeting

  Hi all

  We have webex 2.6.1.45.B - AE, call out of work, but a drop after you have entered the code-meeting... Work of DTMF.

  may be, because: you are using a trial version of the Cisco WebEx meeting server which expires in 32 days. Buy licenses to host for your system to avoid the limitation of access host?

  or someone has an idea?

  Thank you very much!

  Hello

  This problem is caused by a bad configuration of the integration of CUCM with CWMS.

  Make sure you check you SIP Trunks and SIP configuration on CUCM routing model.

  Make sure that your points in routing SIP Trunk SIP of Point Application model.

  Make sure that the Partition configured in routing SIP model belongs to a CSS that is configured in the LoadBalancing SIP trunk under:

  1. change of itinerary calling search space

  2 outside dialogue see calling search space

  Also, refer to this post to understand why the model of routing SIP and Application Point SIP trunks are used: https://supportforums.cisco.com/discussion/12879351/cucm-and-cwms-call-routing

  In addition, this guide to the official reference documentation: http://www.cisco.com/c/en/us/td/docs/collaboration/CWMS/2_6/Planning_Guide/Planning_Guide/Planning_Guide_chapter_0101.html

  I hope this will help.

  -Dejan

• Since iOS 10.0.2 my phone is accessible without the access code

  Since iOS 10.0.2 my phone is accessible without the access code after I pressed the sleep button. Press the home key several times my phone opens. As a first step, it is that he fell asleep in itself not when I used the sleep button but now even after skeep button I can access my phone without the password.

  the rear power and apple support site are not easy to use to report the problem.

  Have you tried to set up your password again in the settings?

• Playgrounds are learning to code 1 download error

  I recently bought an iPad Mini 2 specifically so that I could use the app to playgrounds to learn about Swift.  Whenever I try to download the playing field 'Learn to Code 1 - basics of the swift' I get an error that says: "not taken download error supported URL.  I uninstalled and reinstalled the soft playgrounds several times.  Other playgrounds (as 'learning to Code 2 - beyond the basics') download very well.  How can I bypass or fix this error and get the first playground of lesson?

  

  Finally, the playing field is downloaded successfully!

• Access code is lost as soon as the screen turns off

  When I turn my wrist after that my Apple Watch screen exploded, I need to enter the access code. I turn on the wrist, the screen turns off, I turn back, screen lights up, I need to re-enter the password. And so on and so forth. The watch does not maintain the code.

  I am white white, is not dense hairs on my wrist, no tattoos and I wear the watch very well on my skin.

  The funny thing is: it is a replacement watch, I got today. The other had the same problem, but this is probably because the bottom of the watch with the sensors fell, must have damaged the sensor cable. But this one is brand new.

  Hello

  Make sure the wrist detection is enabled:

  • On your iPhone, in the application of the watch, go to: My Watch (tab) > General > detection of wrist - turn on.

• I am tryng to buying music on itunes, but it says security code wrong please help

  Hello

  I have problems I want tp purchase music on my itunes bt ts always requires the security code that I don't have it please help

  Check your card information. If they are correct, try to change or remove your Apple ID - Apple Support payment information

• error code - 50

  I was trying to update my I-phone with IOS 10.02 6.  While it was updating the phone, I received an error code-50.  the phone is now stuck and I can't seem to exit the mode "update."  What does this error code mean?

  Error code - 50 on iPhone

• What code to replace Quicktime?

  I have an iWeb constructed Web site. http://www.YourSkiCoach.com

  But the videos are inserted for the most part using Quicktime which is interrupted, it seems.

  They appear like this http://www.yourskicoach.com/glossary/SkiGlossary/Pivoting.html

  What code I would want to do a search and replace in Dreamweaver to replace the Quicktime plugin with a youtube embed code?

  Thank you

  Janis

  The method of QuickTime no longer works in some browsers, especially on Apple computers, like the Quicktime player is not supported by default. The HTML5 player should be used instead. Unfortunately some older browsers do not recognize. The player is simpler and not configurable. The code for audio is:

  < audio controls = "orders" source src = "audio.mp3" type = "audio/mpeg" > "

  Your browser does not support the HTML5 audio element.

  < / audio >

  The video player code is

  < video width = "320" height = "240" controls >

  < src = "source movie.mp4' type =" video/mp4">"

  < src = "source movie.ogg' type =" video/ogg">"

  Your browser does not support the video tag.

  < / video >

  (Of course, you don't have to provide two versions, this is just a demonstration script). The URL to the media file assumes that it is in the same folder as the page, otherwise a more complete URL is obviously necessary. The line "your browser does not support...". ' is for display in the case of older browsers that don't support HTML5 - it will not appear in browsers that do.

  Unfortunately, different browsers display output in different ways. With the drive audio Safari does not provide a progress bar; and unlike the player QT player width cannot be configured - for example if you try to fit exactly under a picture. However it should work in most cases - same Safari in Snow Leopard will manage, although I can't answer for what earlier either. I have not tested the video player, but it should work OK in all modern browsers.

• I had a problem with my iPad 2 Air when I changed my Apple ID password, the problem is, it shows me a Massage says ENTER the PASSWORD, and then said your PASSWORD will be used when the signature with the new device, but when I but the code it shows fail m

  This problem happened to me and it belongs to iCloud and I have used so important, please can someone help me?

  Hello. The access code on your iPad is the code four or six numbers you will need to enter to unlock the device. It has nothing to do with the verification of your Apple ID or two-step. Are you able to unlock your phone? If you are, then please describe the steps that lead to your problem. Since you have changed your Apple ID password, you will need to go to two settings > iCloud and settings > iTunes and app store and sign out of your Apple ID, then connect back with the new PW.

• Woman updated its iPAD Pro 10.0.2 and is now locked screen display "Enter Access Code, contact ID requires your access code when you restart the iPad." She has no idea what is an "access code". Any help is appreciated.

  Woman updated its iPAD Pro 10.0.2 and is now locked screen display "Enter Access Code, contact ID requires your access code when you restart the iPad." She has no idea what is an "access code". Any help is appreciated.

  If she don't remember: If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

• code with the card number when signing in appleid, illustrates that am in a town of 200 miles! How to change location?

  When signing into apple id, code number comes with the map that illustrates this am in a town of 200 miles! Why and how change location? to correct a

  You can not. It does not use location Services. It uses your IP address provided by your ISP (ISP). It corresponds to the IP address to the mailing address of your ISP to "locate" you.

• Why can't I enter the country code of my phone number for the 2-step verification process?

  I just upgrade my iPhone 6 to 10.0.2. In the home screen, you asked me to provide my phone number to register in the system of validation in 2 steps. However, + 82 (South Korea) is not on your scrolling list.

  https://www.YouTube.com/watch?v=aPFbPt3KGqY

  Hey aramkim80,

  I see from your post that you are not able to enter the country code for the South Korea when setting up for your Apple ID security two-step verification of your Apple ID as much as possible is always a good thing, so I understand your concern.

  Take a look at this article: frequently asked questions about two steps checking of Apple ID. This article presents a list of countries is available in two-step verification. I do not see the Korea of the South on the list of countries currently supported, it's why you're not able to do this.

  Hope that answered this question for you.

  See you soon.