Dual boot on F20 - 137

Similar Questions

• Question about upgading Qosmio F20-137 to dual-core

  Hi I want to rank up my Qosmio F20-137 to dual-core. I just need some advice on which one to buy.
  Thank you
  Chris

  Hello

  Needless to say that a CPU upgrade in a laptop is totally sensless because you won´t gain true high performance. On the other side, you have to be a technician who should be familiar with these systems, because a mobile system is NOT THE SAME as a desktop system.

  Regarding your question:
  This system is not able to take a dual-core cpu, because you only have an Intel 910 chipset / 915GM which can only take Intel pentium M.

  If you don t believe me just check out this site:

  http://www.Intel.com/products/chipsets/915GM/index.htm

  Welcome them

• Sierra takes in dual boot with Boot Camp? Laminated through 25 pages. Did not direct discussions or responses.

  Installation of Microsoft Windows need to run Microsoft 'Access', which is not available to OX. Until I try to install OX 10.0.2 does anyone know if it supports the dual boot with BootCamp or similar? Thank you!

  Boot Camp creates a Windows partition on the internal disk and allows the computer to be switched between Mac OS X and Windows, but not to have two OS running at the same time. make products such as VirtualBox.

  (144961)

• (SOLVED) Profile of tuberculosis path must be reinstated to Dual boot w/each start

  Having a dual boot (W10 & Ubuntu 14.04). Configure TB on first and migrated W10 W7 all files/folders for TB to it. Worked well. Then configure Ubuntu TB. Set the path for the profiles to the location on the main disc used by W10, I can use the same files. Worked 1st time and recognized of all the folders/files/address/etc. When I re-boot of Ubuntu it says folder Profiles is missing. In the Terminal I follow these steps to fix:

  CD/usr/bin >
  . / thunderbird - profilemanager >
  Remove "default profile" >
  create new "default profile" and sets the path to the folder of old profile even on main drive >

  Again, everything works until the next reboot. So I have to re-enter the foregoing all over again! Any suggestions GREATLY appreciated!

  Congratulations. You can then mark the thread as "Solved" Please?
  Thank you.

• Migrate to El Capitan in a dual boot Situation

  I have a Mac Book Pro 2011 with two internal hard drives.  (I got the optical drive, replaced by the second hard drive).  A reader has installed El Capitan.  The other disc has Snow Leopard.  I want to finish my transition to El Capitan while being able from time to time dual boot from the Snow Leopard disc in order to run some legacy applications.  Meanwhile, I have done work on "both sides of the fence" and do not want to replace or destroy data and applications that currently exist on the drive from El Capitan.

  Can I use the Migration Wizard to move most of the data and compatible applications since the Snow Leopard disc to the drive of El Capitan?  Or who will overwrite what already exists on the disk of El Capitan?  Or can / should I I manually copy data and applications from one disk to the other?  My end goal is Snow Leopard "skeleton" for legacy applications, thanks to the drive of El Capitan being my main boot drive.

  Hope this makes some sense.

  When I had this situation, I did a manual copy, so I would have more control over what was copied and where he went.

• Dual Boot Windows 10 error

  Greetings!

  I have a MacBook Early 2015 Pro 13 "i5 2.7 GHz, 16 GB of RAM and 128 GB SSD.

  I decided to dual boot my mac with Windows 64-bit 10 and I downloaded the file ISO 10 64-bit Windows, and when I tried to use the Bootcamp Assistant to install it, it gave me the following error message:

  

  This is clearly an iso version beyond Windows 8, I'm stumped!

  Thanks in advance for all comments and advice!

  Can validate you your ISO for the size and MD5sum as shown, using OS x Terminal?

  OpenSSL md5 Win10_1511_2_English_x64.iso

  MD5 (Win10_1511_2_English_x64. ISO) = 3ca03a2c59ae5b58ca965a345d4f2ae1

  LS - lgh Win10_1511_2_English_x64.iso

  -rw - r - r-@ 1 staff 4.2 G may 7 08:33 Win10_1511_2_English_x64.iso

• Dual-boot Windows and Linux, but Linux has calendar, TB 31.0

  I'm using Linux Mint and Windows 7 dual-boot. I have TB 31.0 installed on each operating system. TB Linux has a capacity of calendar; in Windows, there is nothing (by nothing, I mean no calendars - I can't see their properties, for example, access somehow).

  I should add that Windows and Linux TB programs share the same profile folder (located on a separate partition), therefore, all of the same modules, passwords, etc.

  The error console records the following:

  Timestamp: 14/08/2014-18:41:33
  Error: Components.classes['@ [cid] is undefined
  Source file: resource://calendar/modules/calUtils.jsm-> file:///P:/PortableApps/ThunderbirdPortable/Data/profile/extensions/%7Be2fda1a4-762b-4020-b5ad-a41df1933103%7D/calendar-js/calUtils.js
  Online: 17

  There are a variety of flow on the errors related to this.

  My apologies for posting this in this way; I intend to submit this via the crashreporter, but I can't get the program crash with this error earlier.

  An answer to my own question: it turns out that, while sharing a profile works quite well for most of the cases, with lightning, he does not, like the extension has different versions of Linux and Windows. The problem is solved very simply: by not using is not the same profile for each version.

  Glad to see that no one takes on this one (except me, of course).

• Can not start my Mac Book Pro Apple on Dual Boot

  Hey guys - need help

  I have a 2015 Mac Book Pro that I have a dual boot with Windows 10 of setting, everything went well, but I found that I had lost the ability to open any program in Windows, installation of 'apps' thedesktop went, Edge Windows, search etc had disappeared off the coast of the taskbar. Restoring Windows installation wouldn't work, so did a repair through the control panel within Windows 10 who worked and everything in Windows was back to normal.

  But now, I find that I can not boot into the side MAC from my laptop, if I go into my PC the "Bootcamp" of my SSD drive partition is there but no side of MAC.

  Any help would be appreciated.

  Try to start by holding down the Option key.

• 24 b017c: 24 - b017c dual boot with Win7 possible?

  The b017c is capable of running WIN7 pro in anyway shape?

  I really need to do a system dual boot with WIN7 If Yes.  WIN10 is not be nice to some specific software Attorney that I need to have to work for a client. Win7 is the latest OS, this software is compatible with before an upgrade of expensive software can't be compatible with Win8 or higher (we're talking $1000-2000 range).

  I tried to install WIN7 on this computer after the partitioning of the disk space, and put out several settings in the bios (I had error btw), but WIN7 keeps hanging in the first screen after loading the drivers (language selection screen). Something happens where ports USB closing killing all connections to the mouse and keyboard. I have tried many changes in the bios settings and a retry of the WIN7 Installer (from an installation disc) but no dice.

  Is there a certain combination of settings that must be disabled in the bios to get the win7 Installer right or I'm screwed?

  Thanks for any help

  What an adventure!

  As you discovered, you must completely format the drive as one or the other (GPT or MBR).  You cannot format a GPT partition and the other in the MBR.

  I wonder if you had back and disabled the legacy mode, if W7 would let you install on the GPT - or partition if the disabling legacy mode would also have permitted secure boot.

  In any case, it's water under the bridge.

  Drivers... Here are some that may work...

  First install the driver from the Intel chipset and restart the PC.  A 2nd on the left is the automatic installation file.

  https://Downloadcenter.Intel.com/download/20775/Intel-chipset-device-software-INF-Update-utility-?product=1145

  See if this graphics driver works... 3rd one down on the left is the automatic installation file.

  https://Downloadcenter.Intel.com/download/26228/Intel-graphics-driver-for-Windows-10-and-Windows-7-8-1-15-40-?v=t

  Audio: Accept the agreement.  Download and install the 2nd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 24 & PFid = 24 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  Ethernet: Download, unzip and install the 2nd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 13 & PFid = 5 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  Card reader: download, unzip and install the driver from the 1st on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  Wireless: 2nd pilot down on the left.

  https://Downloadcenter.Intel.com/download/26242/Intel-PROSet-Wireless-software-and-drivers-for-Windows-7-?product=89450

  Bluetooth: 2nd one down on the left.

  https://Downloadcenter.Intel.com/download/26311/Intel-wireless-Bluetooth-software-for-Windows-7-?product=89450

• Re: Problem of dual boot Win7 and WXP

  I read the complete step by step how to Setup dual boot windows 7 and xp. I have all my partitions has prepared in advance and them labeled accordingly so there is no confusion.

  I installed windows 7 on my new SATA drive. Everything went OK, except that I've never had a start this menu - at 7, it's like Windows XP Home edition was not there.
  I downloaded and installed and ran, easybcd and tried to add the menu WXP manually entry. He asks the drive and the drive with xp on it is now Windows 7, drive D (when E is I boot xp).

  All the necessary files (ntldr, boot.ini, ntdetect.com) are all on this disc. But when I try that menu entry, every computer is restart. It will start again than windows 7, unless I go into the BIOS settings and change the HDD boot order (in this list, if I do that with nr of partition Win7 1, I can boot windows 7 and only this, if I do that with nr of partition XP 1, I get my old regular boot.ini boot menu (what makes me also in my ubuntu wubi installation).)

  I would like to be able to boot in Windows XP Home edition from the Windows 7 start menu, or, Alternatively, to want to boot Windows 7 Startup menu Windows XP Home (what would be even better).

  Are there directions for me?

  Thanks in advance.

  I have more Satellite A300 with two hard drives and I've install WXP and Win7.
  What you need is the Boot Manager. When you start your laptop, you can choose which OS should start, and one of them can be set as default OS so if you n t choose anything after 30 seconds, one of them will start automatically.

  I'm using Win7 OS default.
  > I would like to be able to boot in Windows XP Home edition from the Windows 7 start menu, or, Alternatively, would like > to start Windows 7 from the start menu of Windows XP Home (what would be even better).
  I put t know if something like this is possible. If you want to change your OS, you must restart your laptop and start the second OS.

• Try to have a dual-boot with Windows 10 & FEDORA

  Hello
  I have 10 Windows installed. I want to have a dual-boot installation of Fedora 23.
  I created a partition. I installed Fdora. Everything seemed fine, but my system keeps on startup on Windows 10. I never get a dual-boot menu.
  No idea where this can be configured?

  I did or tried things:
  -updated my bios to the latest version
  -looked for installation of UEFI, I can't find where I can add the grub Fedora (something) any idea?
  -changed the quick boot setting in the Windows registry to 0
  -tried many things in the BIOS but no luck

  Thank you
  Damien

  Hello

  Please tell me a little background here.
  -C' was a unit of 10 Windows factory installed? Means to come with factory Win10? If not, this operating system has been installed on the factory unit? 7, 8, 8.1?
  -I guess that the aircraft had Win10 and you then added 23 Fedora. How did you go about to achieve this? Did you use the installer to resize a partition first? Which partition?
  -Don't you let Installer automatically configured partitions or did you do it manually?

  I tried it myself and was only partially successful, but got a quite different result that you did.
  Win10 has been installed at the factory.
  I resized the partition system (c) allow about 100 GB for Fedora 23.
  Let the installer automatically created the partition in that space.
  Once installed, the unit can restart in GRUB2 (Please note: NO of Win10) and let me choose boot Fedora or Win10.
  The boot of Win10 was however broken and I had to take a few steps of dignostic before Win10 has finally started ok (as did 23 Fedora of course).

  Then when everything was done, the device starts in GRUB2 and let me choose between Fedora and Win10.

  Tom BR

• Satellite Pro A200: How to create Dual boot; Vista & XP using the recovery CD

  I just bought a laptop Satellite Pro A200, which was supplied with the product for Vista and XP Recovery discs.
  The license specifically Vista also XP licenses.
  Can I set up a dual boot so that I can boot to Vista or XP? If so, how?

  I would also like a third boot, Red Hat Linux 9.
  Any comments?

  Hmmm. Usually it s possible to use two or more operating systems on the computer, but as far as I know the Toshiba Vista recovery CD formats whole disk when installing Vista and this will lead to the loss of the OS installed.
  I m not 100% sure on the recovery of the newest XP CD called RECON doesn t CD include an expert mode which allows to choose between the different partitions.

  So I guess that each use the recovery CD will format the HARD drive and erase the installed data. But of course, you can try to install the two BONES and to check if the restore XP CD allows to choose the second part of the installation of the OS.

  If it does not, it seems that you will need to an original XP from Microsoft CD or the original CD of Vista to use the two BONES.

  Best regards

• Please help, Dual Boot list disappeared

  Hi, I downloaded Windows in my Mac air, while I made a new partition, the dual boot missing I tried to solve the problem.

  but I was afraid to hurt, I used the terminal to fix MBR and it gives a message of sth, I could decode it:

  Last login: Sun Apr 10 21:28:45 on console

  manhals-Air: ~ manhaldawood$ sudo fdisk/dev/rdisk0

  Password:

  sudo: fdisk/dev/rdisk0: command not found

  manhals-Air: ~ manhaldawood$ sudo fdisk e/dev/disk0

  Password:

  Fdisk: could not open/usr/standalone/i386/boot0 MBR file: no such file or directory

  Type 'help' for more information

  Fdisk: 1 > p

  Disk: geometry / dev/disk0: 14751/255/63 [236978176 sectors]

  Offset: 0 Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-236978175] < unknown ID >

  02:00 0 0 0-0 0 0 [0-0] unused

  03:00 0 0 0-0 0 0 [0-0] unused

  04:00 0 0 0-0 0 0 [0-0] unused

  Fdisk: 1 >

  Can you help me?

  Thank you

  Manhal D George

  Please after the release of

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

• Tecra A10 - dual boot XP and Windows 7

  Can I set up my Tecra A10 Windows 7 from dual boot with XP?

  I created a partition on the HARD drive. When I try to start my load of CIP 2 ser XP I can almost the first Setup screen then bomb out with a message saying to continue would be detrimental to my installation of Windows 7.

  Any ideas. Bobg

  Hello

  Of course, you can do a system dual boot with both operating systems. But before you change anything on the HARD drive partitions you create the Toshiba Recovery disk if you didn t it yet. With this record, you can restore the factory settings every time.

  Generally if you have installed Windows 7 first of all you need to create a new partition for Windows XP. You can install XP on this partition and you need to change the boot sector using EasyBCD or another tool.

  In your case, I would ask Google you'll find hundreds of tutorials how to make a system dual-boot. ;)

• Satellite U940 PSU6VA - Dual boot with Ubuntu based distributions

  _ * My specifications: * _
  * Model: * Toshiba Ultrabook (Satellite PSU6VA - 00S 002 U940)
  * Operating system: * Windows 8.1 x 64 (upgrade of Windows 8 x 64)

  I would like to set up my computer to dual boot with Windows 8.1 (x 64) and Zorin OS 9.1 (64-bit).

  ZORIN OS is a derivative of Ubuntu which maintains a binary compatibility with Ubuntu i.e. Ubuntu and Zorin use the same drivers and can run the same applications. John Damascene is more or less just Ubuntu with a different desktop environment and some additional preinstalled applications.

  So far, I know that I need to disable the QuickStart Windows 8.1. What I have to do something else (for example disable Secure Boot, CSM, etc.)?

  In addition, my Ultrabook comes with 2 hard drives: 500 GB HARD drive and a 30 GB SSD. Windows uses the HARD disk for storage and for implementing SSD caching, through technology Intel Rapid Storage Technology. Is it possible to set up John of Damascus to do so (preferably without disabling caching on Windows)?

  NOTE: I prefer to do things using graphical interfaces, rather than the CLI. I don't mind given CLI instructions; also just showed me the GUI equivalents if possible. I use the CLI if there is no alternative.

  Post edited by: Justinian

  Hello

  See my responses / comments among your questions (I took part of your message and inserted here):

  So far, I know that I need to disable the QuickStart Windows 8.1. What I have to do something else (for example disable Secure Boot, CSM, etc.)?

  Answer: If you want to dual-boot, do NOT select WSC as preventing Windows to start.
  You shouldn't have to disable startup secure either, but I can't promise that. I think that Ubuntu 14 has support for secure boot.

  In addition, my Ultrabook comes with 2 hard drives: 500 GB HARD drive and a 30 GB SSD. Windows uses the HARD disk for storage and for implementing SSD caching, through technology Intel Rapid Storage Technology. Is it possible to set up John of Damascus to do so (preferably without disabling caching on Windows)?

  Answer: No, I don't think that there is a way to use the SSD in Zorin without making it unusable for Windows.
  Suggestion - let it be.

  Tom BR