Dual boot Win 7 64 - bit of complications and Win10

At the present time, I have a dual boot system running Windows 7 and the preview to win 10 (on a separate SSD). Everything works OK.

I want to install a new motherboard and load a 64 bit version of Windows 7 (new battery).  And... I want to use the SSD for the final version to win 10.

If I understand correctly, I will have to remove my HD Win7 and win 10 SSD to install the 64-bit versions. I have a DVD 64 bit Windows 7, but I guess I'll have to get a Win 10 ISO.

I would like to reinstall a large part of my Win 7 backup files and programs for the 'new' 64-bit Windows 7. Then I carefully would focus on files and programs to victory 10 64-bit in the car.

What is freaking me out, is the vision of key programs does not work with the 64-bit versions. If all goes well, I read that a large number of 32-bit programs running on a 64-bit system.

With a bit of luck, I have to burn (in TB) storage so I can back up carefully, but that is not good if the stuff saved refusing to work with a different system.

I'd love a lot of comments on my strategy. I'm too much of a big deal, or it's going to be a nightmare?

Thank you!

Kurupa salvation,

I'll be happy to help you with the problem you have with the computer. I understand the frustration when things do not work as it should.

If the program is specifically designed for the 64 bit version of Windows, it will not work on the 32-bit version of Windows. (However, most programs designed for 32-bit version of Windows operate on 64-bit Windows version).

Device drivers designed for the 64 bit version of Windows do not work on computers running a 32-bit version of Windows.

Please follow the link below to learn more about Windows 32-bit and 64-bit.

http://Windows.Microsoft.com/is-is/Windows/32-bit-and-64-bit-Windows#1TC=Windows-7

Hope this information is useful. Just reply in case you have any other questions. I'll be happy to help you.

Thank you.

Tags: Windows

Similar Questions

  • Dual boot Win 7 64 bit and XP Pro 32-bit (win7 installed first)

    How can I set up: dual boot Windows 7 Ultimate 64-bit and Windows XP Pro 32-bit (Windows 7 installed first)? I have Win7 on a 2 terabyte HARD drive, with another 1 terabytle internal HARD disk and two 1 terabyte external hard drives. I have an Intel Core i7 960 @ 3.20 GHz, 20 GB of RAM. I want to keep Win7 on 2 TB drive and add WinXP on the other 1 TB internal drivw in a configuration dual-boot. The other two drives 1 TB external would be used for backups and data. I would like to be able to boot XP because I have many applications running on XP wothout having compatibility problems.  The two Win 7 and XP are complete versoins. Or that I would be better to try a virtual configuration?

    Are you aware that you can install the free XP mode on your Windows 7 system?  Once installed, you can launch in 15 to 30 seconds as a task under Windows 7 and run your XP applications without having to reboot.  It works fine as long as you can live with the graphics.  The graphics of XP Mode are great for business applications.  This would be my first choice.

    You will probably get the positions, which suggests a way to install XP and then download a program or two and patch in some places.  But for me it's much simpler to just create a small partition of 30 GB and make a 30-minute "quick and dirty" installation of a second absolutely minimal copy Windows 7 in there.  This will get all start after installing XP, if you decide to go this route.  It's not like intelectually sophisticated as more involved patchwork approach, but it is faster and easier.  As my professor of chemistry at first year said "anyone can make things complicated; He needs to make things simple.  I think the professor was very clever!

    I hope this helps.  Good luck.

  • Dual boot Windows vista 32 bit with win 7 64 bit

    Is it possible to dual boot

    Windows Vista Business 32-bit
    with
    Windows 7 Professional 64 bit
    I do not want I want to have two operating systems
    Now, I have a 25 GB Partion ready for Windows 7, I only have Vista currently.
    Apparently XP32Bit can dual boot with win7 64-bit but can vista 32 bit?
    There will be problems with a Dual Boot Vista/Win7?

    Hello

    You must ensure that 64-bit Windows 7 drivers are available from the manufacturer of your computer for all the hardware, or it will not work properly.

    And is the same for your printer, etc.

    Read this tutorial on dual boot them, including system requirements:

    http://www.SevenForums.com/tutorials/5166-dual-boot-installation-Windows-7-Vista.html

    See you soon.

    p.s. We need a full license of Windows for two operating systems, as upgrade does not here apply.

  • Dual Boot win 8.1 have 8.1 on both systems, possible? How?

    Hello

    I run a Dual boot.

    1 system Win8.1 and seams OK. This system worked Win 7 and upgrade to win 8 was done with the upgrade ISO available without problem.

    The upgrade to win 8.1 were made without problem.

    2 system was created from scratch and win 8 has been installed using the ISO available. Now I want to upgrade the system 2 win 8.1 but I can't access the STORE. The shop window displays 15 items, but I can't open the STORE I tried the MSreset.exe, but it generates an error pop up. How to fix and upgrade of system 2 Win8.1

    Hello

    Solved

    I have reinstalled Win 7, on a new partition, upgraded to Win 8 using my ISO and upgraded to Win 8.1.

    Thank you for me

  • Dilemma of dual boot Win XP SP3 Pro and Windows 8 Pro

    At this time, April 2013, I expect to build a desktop system dual boot with Windows 8 Pro for the current and future capabilities and Win XP Pro for continued use of legacy aps favorite who will not run on Win8. It turns out that the disc formats are a problem. The Win8 64 bit needs a partition format GPT to install 32-bit XP or XP Pro needs a format MBR partition to install. No OS will share the same format and a main drive cannot be formatted and partitioned in a type of format or the other. What to do? !! Two computers are not an acceptable answer; I want a 'box '. In addition, not interested in XP Mode embeded in Win8 or 'virtual machine '. One suggestion has been to run the operating system on separate disks. For me, this means that 2 SSD is to get performance on the two operating systems. Also, to move from one OS to another, you must restart; catch the key bios entry; change the boot sequence; Save/quit; and reboot. (Awkward!). So what to do with the data and documents - one NAS file storage (for example, disk WD Live 'cloud')? There's good news to have? Are there recent usability solutions to help solve the dilemma of the dual boot? A boot manager will really help and there a good "gift" there Boot Manager? Thoughts, anyone?

    I have a custom system DIY mb Gigabyte Z77, processor i7-3770, running a fresh XP Pro SP3 Edition Builder.

    The drive letter is not critical since XP, Windows 8 will still start as C: (even if the partition is Z: in Windows XP).

    I pre-formatted Windows 8 partition before installing Windows 8 (named volume: Windows 8).

    Then, when you reach the screen "Where install" during the installation of 8, choose the partition of Windows 8.

    You can view other things is the BIOS, look for compatibility / legacy mode option.

    J W Stuart: http://www.pagestart.com

  • Dual boot Win 7 and Linux using factory restore DVD

    I have a HP Folio 13-2000, I like a lot

    However, I've been a user of linux (Ubuntu or Mint) for many years.

    I liked the installation of Win 7 64 bit, but he's been hogging my 128 GB SSD.

    To cut a long story short, I screwed up the dual boot installation, (first time!), but at least I have created a series of 3 restore DVD beforehand.

    So, I've been using Mint13 cinnamon and everything is dory hunk, but now I work at the Nepal and the only internet connection I have is a dongle USB CDMA of China Telecom, which works best with Windows.

    So, I installed a 40 GB for Win 7 partition alongside my Linux Mint 15 in a 15 GB partition and tried to do the minimum installation from the DVD, in the hope of having a chance to install in the 40 GB partition.

    I know how to get the boot of Linux back using Rescatux.

    But I could see that he had no other choice, and Win 7 was going to wipe the entire disk.

    Fortunately, I removed the external cable of DVD and has managed to reconstruct my Mint boot 13 again.

    I don't want to delete and reinstall my Linux Mint13 as it works very well and is perfectly up to date, and there are a lot of files in the host partition is.

    So, how can I do a restore factory, without this reformatting all partitions?

    Hi Slackbladder,

    I strongly recommend that you copy the recovery on an external disk partition before you try that. I'm not aware of what specifically happens when you try it. An interesting thing is that in the HP BIOS, there is no option to turn on or turn off EFI mode.  If the partition is big enough it can work.

    Best regards

    ERICO

  • Dual boot win xp and win vista

    I use a computer with 2 partitions on my hard drive.  The first one has vista 64 bit on it... I would install xp 32 bit on my 2nd partition to create a system dual boot, but everything I find says to install the oldest operating system first.  When I tried to install win xp to Windows vista, it wouldn't let me.  Then when I tried to boot from the xp disk, the installation blue screen came, but after loading drivers, he jumped a blue screen (the one which means that your computer has crashed) whenever I tried.  How to install xp now?

    Vista is the 1 MS OS where you do not have to install the OS (XP) more older 1st in a dual-boot.
    But, in a dual boot XP remove Points of Vista all the restoration.

    http://apcmag.com/how_to_dual_boot_vista_and_xp_with_vista_installed_first__the_stepbystep_guide.htm

    Read the Guide.

    Come on first, site of the manufacturer of your computer, check to see if your model computer has XP drivers available for it...

    If the XP drivers are not available for your model, forget the idea.

    See you soon. Mick Murphy - Microsoft partner

  • Dual Boot Win XP and Win 98 / Me

    I have an Equium A60-692, I want to dual boot it with the existing Win XP and Win 98 (pref) or Winme. I succumbed to the Win 98 or Win Me loading on the hard drive. Even during startup with a completely blank disc. (formatted). The installation fails at some point when I think it's either looking at PNP or pieces PCMCIA devices. Someone at - it win 98 on a laptop toshiba modern. What I missed. Someone help please!

    Hello

    The first important difference is that partitions are most recent an old FAT32 and NTFS HARD disk. Please check this page of http://www.ntfs.com/ for more information.

    Good bye

  • T410: How Dual boot Win 7 with Ubuntu?

    I like to keep my config to origin win 7, but to add the option to dual boot into ubuntu 10.10 as my main OS. Anyone has any experience on how to do this?

    To be sure, I would create a set of recovery discs if you have not already,

  • HP ProBook 4520 s - dual boot between Win7 64 bit and Ubuntu 10

    Hello

    I just got my new HP ProBook 4520 s a few days ago and:

    (1) there were 32 bit Windows7 professional pre-installed / pre-loaded

    (2) it comes with the TWO 32-bit and 64-bit Windows7 professional DVD HP (I guess versions OEM HP)

    (3) the HD have 4 partitions in the following order

    score A 3 a) named SYSTEM

    3 (b) the parition where Win7 is installed

    (3 c) HP_RECOVERY partition

    partition HP_TOOLS 3D)

    I did a lot of dual-boot in the past years, but my question is really related to maintain the HP diagnostic tools that arise before even that any operating system is loaded... and diagnostic tools are those of the HP_TOOLS partition. For example, when I ran some diagnostic tests, after completing the tests and the boot of Win7, I see in the HP_TOOLS partition, in one of its directories, a .log file recently updated with the results of diagnostic tests. I want to assure you that I can still run powered on the laptop even after dual-boot diagnostic tools.

    Now, since I have the DVD 32 - bit and 64 - bit, I decided I want to dual-boot between Linux and 64 bit Windows7 professional. So here's what I've done so far:

    (A) has reduced the volume of Win7 Windows computer management disk management

    (B) install Win7 64 bit on top of the existing 32-bit Win7 partition, format this partition during the installation. So no more HP utility and on the installation of 64-bit programs.

    So now I have Win7 64 bit installed and professional pre-activated since it's the same notebook. Then, I realized that I really need to delete the HP_RECOVERY partition since you can have up to 4 primary partitions. So by deleting the HP_RECOVERY partition, I will be left with 3 primary partition, then I can create an extended partition to contain other partitions for Ubuntu, etc...

    But before I delete the HP_RECOVERY partition, I want to know:

    *) When starting, before even that any operating system is loaded, HP you shows options like "Diagnostics" and "recovery". How is the computer HP laptop knows that diagnoses are in the HP_TOOLS partition? How the laptop HP ProBook 4520 s knows that recovery is in the HP_RECOVERY partition?

    *) Since I have the DVD of Win7 HP (32-bit and 64-bit), I don't really have the HP_RECOVERY partition. If I delete the partition, what will happen to this start screen which gives you the possibility of "recovery"? Of course the recovery option won "t work and I don't like, but will remove the partition HP_RECOVERY won't let me boot into Win7, or any OS besides? for example it does not validate there HP_RECOVERY partition to a place before loading Win7?

    *) Then, I want to install Ubuntu, and preferably Ubuntu (or Grub also) overwrites the MBR. I prefer Grub on EasyBCD. I can easily change the configuration of grub so I can dual-boot with Windows7... But again, my question is, where does HP maintains information about diagnostic tools that they are in the HP_TOOLS partition, like the option of the diagnostic tool loading via BIOS before even any OS is loaded. Is that information in the MBR, or is it in the partition named SYSTEM?

    Summary of the questions are therefore:

    (1) where HP keeps its information that diagnostic tools are in the HP_TOOLS partition? It is in the MBR, or the SYSTEM partition, or is it stored in the BIOS hard coded to load more precisely from the location of the partition? I want to keep the ability to run Diagnostics even after you have a dual-boot installation with grub in the MBR.

    (2) deleting the HP_RECOVERY partition will prevent the workbook from loading correctly before moving to Win7, Ubuntu or any other OS?

    Just find the answer to my original question:

    http://h20000.www2.HP.com/BC/docs/support/SupportManual/c01564727/c01564727.PDF?JumpID=reg_R1002_USEN

    He uses the EFI interface and seeks a partition named HP_TOOLS, which means overwrite the MBR will not affect the operation of the HP diagnostic tools.

  • Dual-booting Win XP Pro SP3 - best practices of size Partition

    Hello. I want to create a dual-boot installation, both using Win XP Pro SP3 on a large hard drive while having an extended partition available for data. I expect in the next two years, going to upgrade to Windows 7 Pro. Put the two primary partitions to 20 GB enough or should I go ahead and do 40-50GB each in preparation for a future upgrade. Thank you!

    20 GB is too small to install and run Windows 7 well.  I'd go with 40 to 50 GB. Boulder computer Maven
    Most Microsoft Valuable Professional

  • Dual Boot Win 7 and Linux and using Win 7 in a VM

    I just bought a new laptop with Win 7 Home Premium installed. I want to dual boot Windows 7 and Linux and use Win 7 in a VM. What license I need upgrade who will allow me to do?

    Ivan.

    Well, you can use your current license and install a program from the virtual machine and install your Linux distribution you want in the program of the virtual machine with Windows 7.

    You will however need to a Windows 7 full version license.

    Buy and download Windows 7 Professional, home sharing files...

    Regarding the supported Virtual Machine programs, you can use the following text:

    https://www.VirtualBox.org/wiki/downloads

    VMware Player;

    http://downloads.VMware.com/d/details/player_401/dGpkYnRwd3didGRwQA==

    Dual-Boot Windows 7 and Ubuntu in perfect harmony

  • Problems with the installation of Win 7 on a dual boot Win 8 computer

    I recently bought a new all-in-one computer with an operating system of Windows 8.  However, I have a program that should be used on a daily basis for which a version of Win 8 is not yet available.  I bought a copy of WIn7 and partitioned the terabyte of hard drive with the intention of installing Win 7 in the new partition and the dual boot of the computer.  However, when I try to install Win 7 from the installation disc, it error with an error message that says in order to restart the installation.  No matter how many times I reboot, the error message occurs at the same point - a few seconds after the message appears saying that the temporary files are copied.  What is the problem?

    Of new computer models that are preloaded with Windows 8 have no support for Windows 7 and there is no native driver Windows 7.

    In addition, when you install older versions in a dual-boot configuration, you must install the older version of Windows (Windows 7), then first 8 windows.

    I recommend to install your Windows 7 in a virtual machine program and use the program here:

    You can use alternatives such as Oracle VirtualBox or VMWare Player.

    https://www.VirtualBox.org/wiki/downloads

    VMware Player;

    http://downloads.VMware.com/d/details/player_401/dGpkYnRwd3didGRwQA==

    Or you can upgrade to Windows 8 Pro and turn on the built in Hyper-V that you can use to run Windows 7.

  • Dual Boot System Windows7 32 bit & Sp2 (partaially crashed) Vista

    I have a HP xw4600Core2Duo3GHZ desktop computer, model basic 4GBRAM orginal 180 GB Seagate(Windows VISTA) SATA hard drive crashed once.

    So I need to fix a 500 GB Seagate Hardrive with Windows 7 32 bit installed.

    I need to make a system dual-boot. How can I do this?

    See the following topics:

    Please see the following article with useful information about dual-boot:

    http://Windows.Microsoft.com/en-us/Windows7/can-I-have-more-than-one-operating-system-on-my-computer-multiboot

  • Tripple fault: Dual boot - win 7 x 64 host - ubuntu 12,04 LTS x 64 comments on another partition (raw disk)

    Hello

    I'm trying to install my second OS (ubuntu 12.04 LTS x 64), installed on the dual boot with grub on another partition of my Win 7 Pro x 64 boot disk.

    Linux partition are not mapped in the windows and the installation is as follows:

    1-0 (HPSF/NTFS) partition: 100 MB win 7 partition

    2. 1 (HPSF/NTFS) partition: c: boot Win 7 pro x 64 (133,24 GB) partition

    3 2 (Linux) partition: / partition Ubuntu 12.04 LTS x 64 (37,25 GB)

    4. 3 (Linux swap) partition: SWAP of Ubuntu 12.04 LTS x 64 (3.72 Gb)

    5. 4 (Linux) partition: / home partition Ubuntu 12.04 x 64 (105,14 GB)

    This drive in SATA connected drive (WDC WD3000HLFS - 01G6U1 ATA Device, (Channel 0, Target 1, Lun 0)).

    When you configure the virtual machine, I set the Partition 2 to be used with this machine.

    I checked the folloing points:

    • Intel processor supports x 64 (i5 750 @ 2.67 GHz, 4 cores)
    • VT turned on in the BIOS

    When you run the virtualized Ubuntu I am getting following error message:

    error-mess_3-7-2012.jpg

    I've attached the vmware.log file.

    What I am doing wrong?

    Can someone help me get my virtualized Ubuntu?

    Please foregive me my English because it is not my native language, I'm French.

    Thanks in advance for your help and advice,

    Concerning

    Stéphane

    PS: If you need more information let me know (please tel me also how to obtain the necessary information)

    strange that then 0 is not present?

    > Really bad news

    Yep - but not really news - older versions of the workstation all have this problem with Windows 7 guests - which is why I still use 2003
    I would setup just the Ubuntu VM in a regular vmdk ANDS store it on any of your other 3 discs

Maybe you are looking for

  • Satellite 300CDT: where to find the Bios & driver updates

    HelloIve been given an old 300CDT and I'd like to update biosand other drivers.However, the support site does not list this as a model.I can find a few models that may be similar. Should what model number I use to download BIOS and other updates? Rea

  • How to mute Siri?

    Audio for the content that I discovered with ATV seems less than the levels that I get with my cable TV content. So I increased the volume on the audio receiver. But Siri is VERY STRONG (and most of the guides messages are useless - who needs to be t

  • File reading in Matlab, LabVIEW 2012

    Hello I am very new to LabVIEW and this could be a very simple question. I'm reading a simple labview .vi file in Matlab. I use the version of LabVIEW 2012 32 bit. I saved a file .vi and tried to load it into Matlab as mentioned inof LabVIEW in the M

  • I wonder if more shared video memory will make my game to live better.

    allright, I have a Core 2 Duo 2 ghz cpu, 3 GB of RAM DDR2, an Intel GMA 4500MHD (128 MB dedicated video memory) and 1.2 GB of video memory shared (you know, the kind that comes out of your total RAM and is SLOW). I play games (halo 2, call of duty),

  • Site-2-Site VPn problem

    Guys, I'm new in the world of IP VPN. I am setting up a site 2 site between 2 routers Cisco 1841 vpn. I have SDSL connection on both ends and I am able to ping outside intellectual property both ok but with vpn configuration problems. The VPN tunnel