Dual Boot windows Linux 8.1 on Pavilion 17-e157eo

Similar Questions

• How much better the partition of the HARD drive for dual boot: Windows 8 and Linux

  Hello

  I am a newbie in Windows 8, linux, Partition...

  I want to use my new laptop with windows 8 pre-installed on the following:

  Create a Dual Boot Windows 8 / Ubuntu
  Create on my drive C (single disk on my laptop):

  * a partition for the system
  * one for Windows 8
  * one for data and
  least for Ubuntu OS

  My goal is:

  -to install VmWare on Windows 8 and run Splat Checkpoint with virtual machines to make the FCTC laboratories.

  to install GNS3 on Ubuntu for CCNP Labs but with GNS3 to access the files in the data partition

  I have a Toshiba Satellite with 750 GB and 8 GB of RAM.

  According to you, what is the best size for my scores?
  Is there a better way to partition my C drive on my goal?

  Best regards

  I don't know if this is the right section, sorry for that. Feel free to move this thread in the appropriate section *.

  I think the size of partitions depends of the you want to use and install other software.
  So if you have a lot of software which runs under the Windows System I recommend to choose a larger size to win 8 partition.

  However, given that you have a 750 GB HARD drive, you could take 200GB for Win 8, 100 GB to Linux and the rest of the HARD drive size, that you can use for data.

  By the way: I found Nice YouTube video how to create a dual boot using 8 Win and Linux http://www.youtube.com/watch?v=E_Yd2jK-7Jg

  Welcome them

• Just reinstalled Windows 7 as a dual boot with linux ubuntu 11.04, however, used windows recognize my wireless network card.

  just reinstalled windows 7 as a dual boot with linux ubuntu 11.04, however, used windows recognizes my wlan card and does not allow me to scan for networks, absolutely no networks are displayed under networks. Help, please?

  original title: no wireless network

  That's your problem.  You will need to determine which makes your wireless card, go to their website and download the latest driver for 64-bit Windows 7 32 0r according to your material.  If its inbult to your computer, visit vender of your computer (HP, Toshiba, etc) for the correct driver.

  Jerry

• Dual-boot windows 7 on Windows 8 Hp Pavilion Desktop

  Hello
  I need help Dual-boot Windows 7 on my desktop Windows 8. I know it's 'public' to format the hard drive and install windows 7 on windows 8; So I decided to dual-boot. I have found no guides on the internet about how to do this. My computer model: PC p7-1414. I already have a DVD of windows 7 to install Windows 7 with. If you can help me it would be greatly appreciated dual-boot.

  If there is something similar to the line "UEFI" (something like "hp DVD...) in the image below? If so, boot from this line item UEFI.

  

  Please send Bravo

• Satellite C850 - 19(d) - I want to do a dual boot with Linux and Win 8

  Last week I had a Satellite C85O - PSCBWE-03200WGR 19(d)

  Yesterday, I try to make a dual boot with Ubuntu.

  I do not have a start to boot from USB, or iso CD (same choices as for the Toshiba application), and I did one on the bios:
  -Disable secure boot
  -Change UEFI CSM support
  -Save

  On reboot, I get not Toshiba logo, but a black screen with:

  «This product is covered by one or more of the following patents:...» (list of patents...)

  Realtek...

  PXE - E61: Media test faliure check cable
  PXE - MOF: Exit PXE ROM
  "No boot device - insert boot and press a key.

  I can't open the Bios again at F2.

  Which I recover the system?

  Hello

  The unit has been pre-installed with Win 8 64 bit right?

  Change BIOS setting of UEFI to CSM and disabling secure boot prevent Notepad to start 8 to win!

  That's why the device cannot find the boot device and passes to the last option: LAN.
  But given that the laptop can not find bootable system via LAN, the error PXE - E61: Media test faliure check cable appears.

  If you want to use a dual boot, you will need to boot into Win 8
  Win 8 you must create a partition for installing Linux. This can be down in Win 8 disk management. It must reduce a last partition and have to create new free space available.

  Now to start installing Linux you need support... you can burn the iso on DVD or a USB bootable Linux. There are a lot of details on the internet how to create these media.
  Once you have created the bootable USB key, restart your PC with USB connected.
  Press F12 for the boot menu. Now you should see the key USB (if it is bootable!) choose USB and you should be able to install Linux (Ubuntu is great!)

  Here's a nice page that would provide the statement all step by step!
  http://www.intowindows.com/dual-boot-Windows-8-and-Ubuntu/

• Satellite L305-S5939 - Dual boot with Linux

  I recently bought the notebook title mentioned for my studies in computer programming that will require me to dual boot with Linux.
  I decided to use Ubuntu and their instructions for upward the dual boot parameters are simple.

  However, I heard from people having problems with the settings of the BIOS on other brands when said is finished.
  Before I embark on this journey, I want to just make sure that everything is set to avoid problems.

  Unfortunately, I have not found much information about Dual boot with Linux and Toshiba L305s.
  Other than the basic principles of what I need to do before installing?

  I think that a dual boot on the Satellite L305 should not be a problem because you can do it on every laptop or PC.

  If you want Ubuntu you should take a look on Wubi
  http://wubi-Installer.org/
  It of pretty easy to use and in my opinion the best way to install Ubuntu on a system dual boot.

• Re: Tecra S11 - Dual boot Windows 7 and XP

  I installed Windows 7 (from the hidden to the hardrive recovery section) on my new Tecra S11. I would like to know if I can use the Windows XP
  recovery media provided by Toshiba to create a dual boot Windows 7/Windows XP rather than go back to XP?

  Hi dualboot.

  As far as I know it of not possible to create a dual boot with XP and Windows 7 Toshiba Recovery disk. The problem is that the recovery disk erases the entire HARD disk, so there is no option to create a dual boot with another operating system.

  If you want XP too you need to a normal XP installation disk Microsoft or you use virtualization of Windows 7 XP mode, if some n t applications run on Windows 7. ;)

• CMT Compaq dc7100 Dual Boot, Windows 7 Pro and XP Pro

  Tile: CMT Compaq dc7100 Dual Boot, Windows 7 Pro and XP Pro

  Hello everyone.  My computer is adjustable having the dual boot with Windows 7 Pro on disk 0 (320 GB SATA Seagate Barracuda 7200.11) and XP Pro disk 1 (40 GB SATA Samsung SP0411C). As the two systems are available at the start but most all the time Windows 7 Pro would use. The computer is Compaq 7100, WCL PP255US, 3.2 GHZ Intel Pentium 4, 3 GB of ram, Council ch h 0968, bios HP 78 1 v01.05 16/06/2004, chip Intel 915 G Express.  According to the website of Seagate Barracuda 320 GB with (quote), ' he not there no master/slave because every player relationship is considered to be a master in a relationship from point to point.» If two drives are connected to a Serial ATA host adapter, the host operating system considers that the two devices as if they were the two "masters" on two ports separated. Both drives behave as if they were device 0 (master) devices.  On the drive Samsung (SP0411C) I put a jumper for master, it is connected to the motherboard instead of disk 1. Used rider illustrated for Samsung SP0411N since I did not see the SP0411C listed. When selecting information for Samsung Seagate site sometimes showed data for their readers. This is perhaps due to the recent acquisition of Samsung or maybe my mistake.  Tried swapping around wiring of each drive but that didn't work of course. Looked at the settings in the BIOS but did not see a way to create the dual boot.  Please let me know if you need more information. If you know how this can be done or have some suggestions, please let me hear it. As always, thank you very much for your comments.

  Oscar

  Hello oscarmint, I checked the specifications of your system and it does not show the system supports two types of hard drives.

  The system supports only Serial ATA (Sata) synchronous Maximum 150 MB/s transfer rate

  You would need to make the jumper on the Seagate 320 GB Sata Drive pin, set at 150 MB/s.

  You are right that the Seagate would not Cable Select or slave settings and it would be the master and only on cable.

  If the 40 GB hard drive is a type of ATA (IDE), you'd better put as selection of cables (CS).

• windows upgrade xp to vista in dual boot windows xp home and windows 7 ultimate

  Hello, I was wondering if it was possible to upgrade from windows xp home edition to windows vista in dual boot windows xp home edition and windows 7 ultimate.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Here is some information on my computer
  Dell dimension 2400
  Intel celeron 2.40 ghz
  80 GB ide hard drive
  DVD player and cd player
  pre installed windows xp 36 GB 8 GB free
  Make a new partition for windows 7 34 gb free 18
  integrated graphics (60.5 MB)
  Thank you

  Yes you can.

• Remove dual-boot windows partitions 8

  Hi, I have a Hp probook 4530 s with windows 7 64 bit and I want to dual-boot windows 8 but I have the authorized maximum of partitions and I bought the recovery disc for windows 7 so I don't no if I should remove the recovery partition or the tools of hp, hp is pretty much empty is only using 1 mb to 5 GB , but I've heard that there a few updates to the BIOS, so safely remove one of these parties (recovery, tools, or both) to dual-boot windows 8?

  

  What I do is get a 3 TB external hard drive, or a size larger than your 500 GB. Create a widnows system repair disc 7. Use Macrium reflect free, all partitions (snapshot of the disk) backup, delete the ones that aren't needed. Tools and recovery are not necessary (but you should keep a copy so that you can go back to where you are now). The first partition contains startup information so don't get ride of that one. But even if you did and only restored the great OS partition, you could always use the system repair disc, do a startup repair and replace the boot on this single partition files and you're on your way again (it's just an extra step).

  After you remove the 2 partitions have not yet enough space to install windows 8. Go to disk management in windows 7 and shrink the partition and create a new partition in the remaining space.

• Dual boot windows 7 and windows 8

  I would like to know how I would do a dual boot Windows 7 Ultimate for Windows download e-8 for 32 bit?

  How dual boot Windows 7 and Windows 8
  http://www.PAGESTART.com/win8cpdb02171201.html

  The goal here is to create a Windows 7 and Windows 8 Dual Boot computer while protecting your investment in Windows 7 (if problems arise) or do you simply not not to continue to use Windows 8.

  J W Stuart: http://www.pagestart.com

• Dual Boot Windows?

  I have a dual boot Windows 7 and Windows 8. I was wondering if I could increase the size of the space of hard disk for Windows 8?

  There are 333 GB of space available for Windows 7 and 20.8 GB available for Windows 8.
  I would like to know if its possible to increase space for Windows 8?

  You must use a third-party tool such as Easeus Partition Master Home Edition - http://download.cnet.com/Easeus-Partition-Manager-Home-Edition/3000-2248_4-10863346.html

  This will allow you to resize the boot partition by dragging the button to allocate the extra space for Windows 7 or Windows 8.

  Attention, create a recovery for Windows 7 and Windows 8 disk before doing this:

  Windows 8:

  http://winsupersite.com/article/Windows8/Windows-8-tip-create-recovery-media-144098

  Windows 7:

  http://notebooks.com/2011/02/09/how-to-create-a-system-repair-disc-in-Windows-7/

• Can I dual-boot windows 7 with windows 8?

  Hello

  Currently I'm with Windows 8 enterprise edition and now I want to dual boot into windows 7 to be part of my software work. For example my TV tuner software.

  Don't forget that now I'm on windows 8. So, what I can dual boot Windows 7? If so, how?

  And, I can access all the drives and folders with two BONES? will I have to install the software in the two BONES? Can I access photos and videos of these two BONES?

  Hi Laxmi,

  Thanks for posting your query in Microsoft Community.

  I regret the inconvenience caused to you.

  I suggest you to check with our TechNet forum to improve assistance to the question.

  Click on, https://social.technet.microsoft.com/Forums/en-US/home

  If you have additional questions about Windows operating systems, please do not hesitate to contact us again. We will be happy to assist you accordingly.

  Thank you.

• Dual-boot Windows and Linux, but Linux has calendar, TB 31.0

  I'm using Linux Mint and Windows 7 dual-boot. I have TB 31.0 installed on each operating system. TB Linux has a capacity of calendar; in Windows, there is nothing (by nothing, I mean no calendars - I can't see their properties, for example, access somehow).

  I should add that Windows and Linux TB programs share the same profile folder (located on a separate partition), therefore, all of the same modules, passwords, etc.

  The error console records the following:

  Timestamp: 14/08/2014-18:41:33
  Error: Components.classes['@ [cid] is undefined
  Source file: resource://calendar/modules/calUtils.jsm-> file:///P:/PortableApps/ThunderbirdPortable/Data/profile/extensions/%7Be2fda1a4-762b-4020-b5ad-a41df1933103%7D/calendar-js/calUtils.js
  Online: 17

  There are a variety of flow on the errors related to this.

  My apologies for posting this in this way; I intend to submit this via the crashreporter, but I can't get the program crash with this error earlier.

  An answer to my own question: it turns out that, while sharing a profile works quite well for most of the cases, with lightning, he does not, like the extension has different versions of Linux and Windows. The problem is solved very simply: by not using is not the same profile for each version.

  Glad to see that no one takes on this one (except me, of course).

• Pavilion dv6t-7000 failed to create a virtual hard drive for a dual boot Windows 7 / windows 8

  Hi, I just bought this system, a Hp Pavilion dv6t-7000, Enterntainment CTO notebook PC.  I want to take the amount of space between the C drive and create a virtual hard disk.

  Disk 0 is severed as follows:

  System:

  199 MB NTFS; Primary partition, Active system

  C: 678.60 GB NTFS; Boot, page file, crash dump, primary Partition

  D recovery: 21,53 Go NTFS; Healthy primary partition

  HP_tools 108 MB Fat 32; Healthy primary partition

  I would take 50 GB on C: and create a virtual hard disk to install windows 8 to have a dual boot system.  Can someone point me to a credible link that describes how do this or share the solution?  I tried a process described in TechRepublic where you create a virtual hard disk, and then start on Windows 8, shift f10 in an admin window and try to use diskpart select vdisk file that does not exist, that is to say, I'm not.

  Is there anything else I need to do?  I can do this via disk management?

  Thanks much for any info.

  I found this process is here.

  It seems similar to the process of the technology of the Republic, but it has a few key differences. Give the TechNet process a try it may work because of the extra steps, he has.