Dual boot Windows vista 32 bit with win 7 64 bit
Is it possible to dual boot
Hello
You must ensure that 64-bit Windows 7 drivers are available from the manufacturer of your computer for all the hardware, or it will not work properly.
And is the same for your printer, etc.
Read this tutorial on dual boot them, including system requirements:
http://www.SevenForums.com/tutorials/5166-dual-boot-installation-Windows-7-Vista.html
See you soon.
p.s. We need a full license of Windows for two operating systems, as upgrade does not here apply.
Tags: Windows
Similar Questions
-
Dual boot Windows Vista and Windows 8
Hello world
I'm having the following problem: I had Windows 7 as primary OS (C drive) and then installed Windows 8 (on drive D) that is of dual boot. Everything was working fine until I decided to remove Windows 7 from the drive C. I have formatted the drive using Acronis Disk Director 11. After the reboot, the computer was not bootable. I had a reistallation DVD of Vista and installed. Now, I have Windows Vista on C and Windows 8 for D drive that is not bootable. My question is how to get rid of Windows 8 without having my computer starts plu?
Thanks in advance,
Peter
Hello
try to start your computer in safe mode on Vista and remove windows 8 in d ' training of formatting it and check if the problem is resolved.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
If you still have the sam e problem then see below
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
See you soon.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the above does not work, try to make a Bootable ERD to do a Startup Repair:
As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.
As your grave in the category above, download the ISO on the provided link and do a repair of the disc.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
You can make a tool to restart system, System Restore, etc. with it.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista repair disc.
You can do a system restart tool, system, etc it restore.
There is not a disk of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~You can save your data in Mode safe, ifit loads correctly.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
You can only do a upgrade repair facility if the Service Pack on the Vista DVD is not lower than the SP installed, in your case you have installed SP2.
DVD SP level. must be the same or higher to be able to do a repair installation.
Your DVD must be SP2~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Unless you do regular backups, nothng is guaranteed re data.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Data recovery:
1. slave of your hard drive in another computer and read/save your data out there.
2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.
3 Alternatively, use Knoppix Live CD to recover data:
http://www.Knopper.NET/Knoppix/index-en.html
Download/save the file Knoppix Live CD ISO above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://isorecorder.alexfeinman.com/isorecorder.htm
Download the Vista software from the link above.
After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.
Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.
Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.
Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.
When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.
Click on the icons of hard drive to open and to understand which drive is which.
Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).
Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.
-
dual boot Windows 7 64-bit to 32-bit Windows 7 problem
I have a dualboot Windows 7 32-bit and 64-bit. restart from 32-bit to 64-bit of Windows 7 have no problem, but window 7 64-bit to Windows 7 32 bit will be not not charge/hang up after the newspaper. The same problems occur even if systems has been closed to 64-bit Windows 7 and then turn it on and loading in 32-bit Windows 7. It will take at least 2-5 boot in the 32-bit Windows 7, with loagin name and password, suspended and does not pass the log on screen, before 32-bit Windows 7 will load in the window with an error...
can anyone help please.
Thank you
Concerning
Ogata EijiHello
Thank you for providing the information.
1. What is the current state of the question? It works well?
2. What is the full error message about 'Service control manager '?
Provided by the State so that we can help you.
-
THE HP PAVILION P/N F9J18UA HAS A RECOVERY PARTITION ON A 500 GB HARD DRIVE. CAN I STILL INSTALL MY WINDOWS 8.1 THROUGH MY RECOVERY PARTION TO THE 2ND PARTITION ON THE HARD DISK THAT IS SHARED WITH A 216 GB AND GB 206 PARTITIONS, AND WHICH ALREADY HAS VISTA ON PARTITION 1 AND THE RECOVERY PARTITION ON THE 3RD PARTITION EARLIER UNDER SILENCE OF ABOUT 75-80 GB? NOTE: THE HARD DRIVE IS 500 GB W/3 PARTITIONS TOTAL.
Hi @oz0921
I saw your post on the use of the recovery partition to install Windows 8.1 on a partition on the same computer. Unfortunately, this won't work as the recovery would target the entire hard drive and format it. To try this you need an installation CD for Windows 8.1.
-
HP HDX Windows Vista 64 bit laptop with error 1002 of the recovery process
Hello
I have laptop HP HDX which had a sound problem with message of error "Could not play the test tone", tried in several ways by online suggestions and ended to reinstall the new copy with recovery disk. As part of the recovery with a reovery of HP drive, I tried to get it back and it formatted boot partiion and got this error message "error 1002 if the problem persists, please contact HP support. My laptop is out of warranty now. I talked to HP support and they ask me to buy new drives recovery and someone in this forum mentioned that recovery disk will lift the same mistake and we would need to purchase technical support and even that has not worked for soembody after paying $ 200 to support. I am struck with recovery of the laptop now. I also tried the recovery partition revovering and gave rise to no luck. I'm now out of warranty.
I am really fedup with bearing on my this laptop windows vista 64 bit HP HDX laptop problems. What is your best suggestion for me to recover my windows vista now?
Thank you.
GK
I ordered the drive to restore HP for $ 16 and I have no problem in my OS with this disk recovery. Recovery partition that came with my laptop had this error 1002 and he really tortured than me. It is recovered successfully with this new disc of recovery with on all issues.
I would have saved a lot of time, would not have had any stress and restore ($16) if HP disks price had built the free bug recovery partition.
I'll be very careful in buying HP products in the future.
Peace out.
-
Windows recovery disc 32-bit error code meaning version question
Hello
I hope someone can help me. I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means (thanks in advance)?You don't give any info on what was the original problem with the computer.
You have set the Bios Setup to boot from the CD/DVD drive?
At startup, it will say press F2 or delete key to go into Bios/Setup, or maybe F12 to go to the Start Menu.
And have you tried also to tap F8 at startup and choose Safe Mode from the list of Boot Options?
Use up arrow key to do this, press on enter.
Browse your Hard Drive manufacturer's website, download software from here and test your hard drive for errors.
See you soon.
Mick Murphy - Microsoft partner
-
I have win 98se, win xp sp3 and Windows vista 64 bit, I want to share printer files
I have win 98se, win xp sp3 and Windows vista 64-bit PCs, and I want to share files & printer... printer is connect in xp or 98se, well, what is possible... currently, I've got these between vista and xp, which is available when win 98se involved?
Two ways are participatory computers in a windows environment, a working group and a _. You can fill in the blank?
Virtual private networks have little to do with the domains or working groups.
I don't think that WIndows 98 can join to a domain. All versions of WIndows, you mention should be able to participate in a working group, however.
In my opinion, the best way to share a printer is to use a printer connected to the network
-
dual boot windows xp and windows Vista Edition family premium does NOT
I try to install the dual boot of windows vista Home premium with windows xp. And no matter if I try to upgrade to windows xp or windows vista, they want to run scan disk on the opposite partition. Windows xp is on C: and E: is Windows Vista
XP you can skip scan disk and it will work. Vista requires you go back and run the disc scan
That's happened?
http://apcmag.com/how_to_dual_boot_vista_and_xp_with_vista_installed_first__the_stepbystep_guide.htm
http://apcmag.com/how_to_dualboot_vista_with_xp__stepbystep_guide_with_screenshots.htm
http://www.syschat.com/dual-boot-Vista-XP-Vista-already-1946.html
Read and follow the links above for dual boot.
See you soon.
Mick Murphy - Microsoft partner
-
Hello
I have the Asus N70SV B1.Specifications: (http://www.asus.com/Notebooks/Multimedia_Entertainment/N70Sv/#specifications)
No problems with Windows Vista 64 bit, recognizing the 4 GB of RAM. After the upgrade to Windows 7 64-bit 4 GB installed / usable RAM problem / 3 gb. I also checked the following.
1. I am running windows 7 64 bit, NOT 32 bit, I wouldn't be able to run Adobe After Effects® CS5.5 and Adobe first® Pro CS5.5 elsewise.
2. the unusable 1 GB of RAM is not used by the operating system, it's hardware reserved
3. the video card Nvidia GT 130 m 1 GB, shouldn't need that RAM - it certainly didn't on the factory installed Windows he dedicated RAM.
4. I tried disabling and enabling msconfig - boot - Max memory settings, no option solves the problem.
5. He has no option of memory in the BIOS settings to disable the cache in memory / memory the occultation.* I had to use the 64-bit of Windows Vista sound drivers work correctly with Windows 7 64 bit. So I thought that the version of bios or Vista 64 bit can thus solve the problem usable 4 / 3 gb.
* Yes, I have flashed the bios to Windows Vista 64-bit and that still does not solve the problem. Although the system seems faster, it still shows only 3 GB usable.
There should not be a problem with this bios version seen only with the 64 bit Vista OS recognized all 4 GB. I am confused and have no idea where to go from here.
Please help.
Hello
I suggest you to contact the manufacturer of the computer for help.Thank you! -
Hello forum HP, I can use the Laserjet P1102w with USB connection on 3 different devices including a portable Apple and PC Windows Vista and Windows 7 laptop computer, but can not perform a wireless installation with the broadband internet connected wireless PC running Windows Vista 32 bit. The main message is that the computer does not find the printer even when using the USB connection. Any help would be appreciated.
Hi @Kaiser3107,
Welcome to the HP Support forum.
I understand that you have a HP LaserJet Pro P1102w printer that connects three thin devices via the USB port, but you can not perform a wireless installation on a fourth device, equipped of Windows Vista 32-bit, because the PC does not detect the printer via the USB port. I would like to help with that.
Here is a support document which includes 'USB device is not detected by Windows' which can help the issue of detection - Troubleshooting (Windows Vista) USB connections.
Please let me know if that solves the problem, or if you need assistance.
In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.
Thank you!
-
I lost the original games in windows vista that came with windows vista, I installed explore 9 a month ago and it has worked fine until recently, Vista 32-bit. Home Basic
Hi mast cocoa,.
1. what happens when you try to play the game? You receive an error message?
2. did you of recent changes on the computer?
3. you are unable to find the Windows installed games on the computer?
Check if you can find Windows games to the following location.
1. open the Games folder by clicking on the button Start , allprograms, clicking games, and then clicking Games Explorer
Solve game problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-game-problems
If you find the windows games to the place mentioned above can ensure that games for Windows is activated in Windows features by using the link below.
Where are my games?
http://Windows.Microsoft.com/en-us/Windows-Vista/where-are-my-games
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
windows upgrade xp to vista in dual boot windows xp home and windows 7 ultimate
Hello, I was wondering if it was possible to upgrade from windows xp home edition to windows vista in dual boot windows xp home edition and windows 7 ultimate.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Here is some information on my computerDell dimension 2400Intel celeron 2.40 ghz80 GB ide hard driveDVD player and cd playerpre installed windows xp 36 GB 8 GB freeMake a new partition for windows 7 34 gb free 18integrated graphics (60.5 MB)Thank youYes you can.
-
The test equipment is a Site Master S820D used for the test of microwave signals. It is not compatible with Windows Vista 64-bit, but is with Windows Vista 32 - bit. Want to know if there is a way to get back to Windows Vista 32-bit, without having to buy a new operating system. The program is called "Site Master Handheld Software Tools".
Hello
If you want to move from a 32-bit version of Windows to a 64 bit version of Windows Vista, or vice versa, you will need to back up your files, then select custom during installation of Windows Vista. Next, you need to restore your files and reinstall your programs
Use the links below.
Installation and reinstallation of Windows Vista
http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista
32-bit and 64-bit Windows: frequently asked questions
-
PowerPrep application is not compatible with Windows Vista 64-bit
I am currently studying for the GRE and the website includes a study great tool/application called PowerPrep or something like that. I downloaded it and it says it is compatible with Windows Vista 32-bit, I have a Toshiba Satellite running Vista 64-bit and when I go to start a program I get the error message "the version of this file is not compatible with the version of windows you are running check system information from your computer to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program" is anyway to run the program with my computer. I thought that 64-bit is technically compatible with 32 - bit, but I don't know much about computers. Any help would be greatly appreciated.
Hello
"Most programs designed for 32-bit version of Windows works on the 64 bit version of Windows. The notable exceptions are many antivirus programs.
Device drivers designed for 32-bit versions of Windows do not work on computers running a 64-bit version of Windows. »
always check the compatibility of vista programs on the link below
http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx
If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator
It is not compatible with vista, you can try running it in a previous operating system mode
This does not work for all programs
read the information below
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
____________________________________________________________
and read this information MS, too
http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard
-
I have windows vista 32 bit(x86) ie 8 and 4 dates they fail with code 8007371 b
I continue to receive updates that are installed automatically and they don't install, failed code 8007371 b. The four dates at present are Ko 21179717, kb2505189,.
kb2508272, Ko 968930 all with the same error code. I have Windows Update agent and it says: an error has occurred when trying to use it. I have windows vista 32-bit (x 86), IE 8.
Can anyone help, thanks
0X8007371B-ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE
Description of the update of the system for Windows Vista tool
http://support.Microsoft.com/kb/947821If the tool does not help, check the logs for more clues...
Logging
The system update tool creates a log file that captures any issues that the tool found or fixed. The log file is located in the following location:
- %SystemRoot%\Logs\CBS\CheckSUR.log
- %SystemRoot%\Logs\CBS\CheckSUR.persist.log
Maybe you are looking for
-
How can I change my security password if I forgot the answers to security questions?
-
How do I downgrade to iTunes 12.4
My computer is automatically upgraded to the latest version of iTunes which is a horror to try to understand. He mixed my series, movies and music together I am unable to get a full view of my library of over. The view only I get recently played and
-
Satellite C660D-153 of reconstruction after failure or bad HD Windows 7 is installed
Having bought a new hard drive, installing Windows 7 Professional and all Toshiba drivers, relevant (which it turns out that you don't need a recovery disk for - fantastic) I went and sewed to the top myself because I have the product key is for home
-
How to fix the error "Adobe Photoshop CS5 has stopped working"?
I click it and it loads the page with credit, but an error pops up right after that gets done. How should I do?
-
hpslpsvc64.dll access denied
I get a message that reads as follows: There was a problem starting C:\users\USERNAME\local\temp\7zs01c7\hpslpsvc64.dll Access is denied. The associated user account in USER name in the path is no longer exists. I tried to reinstall the HP drivers an