Dual graphics card port to use 2 monitors on my HP a6614f

Similar Questions

• Reviews for dual graphics card system with Pavilion a6130n monitor?

  I am keen to implement a system of double screen with Pavilion a6130n running Windows XP.  I tried to use edge nVidia GeForce with nVidia 2nd card in the expansion slot.  Apparently embedded is not usable with another card in place.  My next thought is to connect two monitors on a nVidia graphics card (using the VGA and DVI ports (with adaptor if necessary)).  Will this work?  Can anyone suggest a suitable video card to accomplish?  Thank you very much!

  No problemo.  Don't forget to remove the video driver on board.  You are looking for a large heat sink if you go with a passively cooled GPU.  The 7200GS runs HOT (80 c) with heat sink base (no fan).  Practically all dual DVI out 7xxx, 8xxx and 9xxx will support two monitors.

  http://support.Microsoft.com/kb/307873

• How to get the dual graphics card to work together?

  I have a satellite L series with dual graphics card that works together. Its an AMD Radeon 3400 m apu with a built-in HD 6520 G and a discreet graphics of 6400 m.

  The 6400 m turns on never, I used the amd system monitor to see if it is already in use, but it's never.
  Even if the 6520g is at full load it lights.

  Any suggestions would be helpful.
  Thank you.

  Hello

  As far as I know, this topic has already been discussed here in the forum and the switch between internal and external ATI GPU is not supported.
  Just designed by nVidia Optimus technology is supported
  So you can switch between the GPU from Intel and nVidia (if both would support Optimus technology)

• ordered a pavilion with graphics card upgrade, upgrade used only 16-bit location

  ordered a pavilion with graphics card upgrade, upgrade used only 16-bit location. I want to connect a second monitor, can I use the parent connections card currently have coverage through them that say "do not remove"?

  Hello

  If you use an adapter, then you have the choice on the end to use the adapter based on the adapter that you use. Buy cable HDMI to DVI and save frustration adapter problems and possible.

• HPE h9-1001de: HPE h9-1001de - broken graphics card can I use the integrated graphics card Intel?

  I bought this PC four years ago (just the version, not CS as in the link):

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c03106002

  The integrated graphics went broken today. Research on the spec Web site I noticed that the Intel's integrated graphics. I won't buy another video card, if there is a graphics processor integrated into the processor.

  Indeed, there are two additional DVI ports; However, they are sealed with a sign "DO NOT REMOVE", and each port is sealed with two screws with a strange format (star with six faces?).

  Why these DVI ports are sealed? Why with this format live strange? I hope that's not for licensing reasons, and that I'm still able to use them as DVI ports...

  Thank you.

  Hello:

  I don't think it is sealed for any other reason than from your PC with a video of the add-on card, they would not people plugging in these ports DVI cables and by calling HP support complaining that the video does not work (because an add on card disables the integrated graphics card).

  Remove your discrete PCIe x 16 graphics card, so the built-in graphics card is enabled, put your hand on the good size torx screwdriver and remove the cover, so you can use the integrated graphics card adapter.

• T510 - Dual graphics card

  I bought a T510 with Intel HD graphics and an NVIDIA NVS 3100 M Optimus graphics card running Windows 7 64 bit.

  How to switch between the two graphics cards use?  I only just found out that the Intel HD Graphics card, which seems a waste when I have NVIDIA card.

  Thank you

  dazdaz wrote:

  I guess that the NVIDIA card has a higher discount rate.  The Intel HD gfx card hurt my eyes at 1920 x 1080 at 60 Hz.

  Y at - it an application installed to manage NVIDIA Optimus, Optimus technology more as an API.

  How can I force the operating system to use the card NVIDIA, my eyes is more important than the life of the battery.

  And you would be a mistake, the maximum refresh rate is detected off the coast of the LCD itself. If you attach an external monitor that has a higher refresh rate, you would be able to select it. 60 Hz is the standard for TN slabs.

• dual graphics cards?

  y at - it no gain in the use of twins sli graphics cards? see if you have two cards gtx 260 how would win you? It would be double the memory cards or you get a percentage of the second card. hope it's a no-brainer. Matt remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  On average, according to a test TomsHardware.com, I read but can't find yet once you get an 80% increase in performance with a second graphics card.

• Zbook Studio G3 HP: How to disable the integrated graphics card Intel and use the dedicated Nvidea graphics all the time?

  Dear all,

  I have a HP zbook studio G3 laptop. I want to go to the Nvidia graphics card permanently.  I tried to disable graphics integrated in the Device Manager, uninstall the driver and allowing even the nvidea card chart of all profiles in the parameter 3D tap in the Nvidia configuration software. Non of them seems to work as the integrated graph is always in action and simple games could not be executed. I always keep in the option to high-performance mode, and the laptop is still connected. Should I manipulate the bios setup?

  Thanks in advance,

  Bezzi

  I have the version non-studio of Zbook 15 G3 which has removable video card. I added the video card after purchase and found that it worked just right if I went into the BIOS and set it to use only the nVidia card. However, because yours is graphic switchable I don't know that you have this option. Have you looked at even the BIOS? Press ESC you turn on, then F10

• HP pavilion HPE-H8-1212: power upgrade graphics card is it useful?

  I currently have a HP pavilion HPE-H8-1212 with an AMD Radeon HD 7450 card with the standard power supply provided with the computer.  From now run many games on this machine with what graphics settings be better then adverage is a sad screen.  I don't need the best, but I was wondering if I could spend my power supply card and graphics mabye if need be to get the best out of this small computer for gaming?

  Does anyone have suggestions on what chart cards (best I can go) that are compatible with this machine as is?

  And/or what power upgrade level to if necessary to install a better graphics card - and which cards would be these (even better cards that would work on this machine)

  Thanks for any info

  Follow the advice given by Big_Dave Expert HP in the following thread.

  http://h30434.www3.HP.com/T5/desktop-hardware/HP-Pavilion-HPE-H8-1212c-graphic-card-compatibility/TD-p/3820114

• Problems with the graphics card when you use AutoCad

  Hi, I have a dell xps 18.4 - i7 with 8 GB of RAM, when I'm working with Auto CAD I face problem with my graphic card, what can I do to fix this? has any experience with that? the graphics card is Intel(r) HD Graphics 4000

  Hello

  Thanks for the reply.

  I'm sorry for the late reply.

  I appreciate your patience.

  I suggest you to try installing the driver in compatibility mode and tick.
  Reference:
  Make the programs more compatible with this version of Windows
  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Please keep us informed.

  Thank you

• I use an iMac with a wrong as a monitor graphics card?

  The graphics card on my iMac went wrong.  The logic board is OK and works otherwise OK.  Can I use the iMac with the graphics card bad as a second monitor in target disk Mode or use it as a monitor for a mac mini? The bad iMac is a model 2011 (of course!) with HDMI ports and Thunderbolt.

  I think you mean that the Display Mode target and any connection to the screen will have to pass by the graphics card. Whereas if you replace the bad graphics card, don't.

• Can I use an iMac 27 "mid-2011 in target Display Mode broken graphics card?

  I inherited the iMac, and rather than buying a new graphics card, want to use it as a second monitor on my MacBook Pro, with thunderbolt. I tried to connect the iMac and MBP with a thunderbolt cable, but F2 command is not turn on/off the iMac in display mode. I'm doing something wrong?

  I think that you need the graphics card to be able to use the TDM. You must also use a good video cable Thunderbolt such as those used with your other view.

• HP Pavilion p7-1154 does support Dual AMD graphics card?

  I have a Pavilion p7-1154 - serial number {removed privacy} - the motherboard is an AAHD3-HB (stock MB) made by Pegatron. I updated the stock 16 GB of Corsair vengeance 1600 6 GB 1333 RAM and upgraded the processor an AMD A6 3600 to an AMD A8-3850, all according to the guide of HP upgrade for this machine. I've also updated the PSU of 300w for a 500w 80Plus Bronze certified PSU Corsair stock.

  Now that's what I'done this day - what I want to know is the MB (AAHD3-HB) does support Dual AMD graphics card, using the proposed graphics cards, I would use a Radeon 6670 GPU.

  Mike

  Mike, after consultation with the other members, I think that double graphis is unavailable because it is not indicated in the specifications.

  However, here is a Youtube video on the CPU.  If you do not find that you were able to use it by a change in the BIOS, please share this information with the forum.  Thank you!

  If your problem is solved, please click "accept as a Solution.

• S Dual of the HP 4530 graphics card problem

  Hi guys!

  So here's the deal. I bought my laptop HP 4530 s 5 months ago and it was working fine until I started to play games. Since it has dual graphics (Intel HD 3000 and AMD Radeon HD series 7400 M) he only reads integrated graphics card (which is an Intel) and no AMD, I tried to download and install the drivers for the graphics card, AMD and it says 'unknown material', but I know it's there because the pilots were showing that I have dual graphics card , but since I have recently updated from Windows 7 to Windows 8 this problem has happened and I don't know how to solve this problem, Please HELP!

  Please see the HP ProBook 4530 s Notebook PC - Driver and software downloads page of Windows 8 drivers for your computer. If you downloaded the drivers from AMD, these will not work because the drivers are customized by HP to support switchable graphics function. Install the provided HP AMD Video Driver and control panel Windows 8 should solve your problems.

  Please click the White Star of KUDOS to show your appreciation

• Several Bluescreens when you use the graphics card

  I've been making blue screens because of the VIDEO_TDR_FAILURE for some time now, and recently reinstalled windows to see if it would fix it. Unfortunately, it didn't, and I get more accidents all in game. So far, I checked my HDD with Seatools, entered back fine, RAM with memtest which was very good. (but only a couple going so far) The only thing that I have not been able to verify correctly is the graphics card. Right now, game will work if I use my integrated graphics to run, but even then it sometimes freezes.

  What should I do to troubleshoot my graphics card? I use a laptop, so opening the case is out of the question. I cleaned the dust and used several different discs, including my laptop was originally and the newest one. The temperatures are not the issue that the accidents have occurred anywhere between 50 to 70 degrees C. Can I still help out, or should I take the laptop in the computer store and let them look?

  Hans

  The pilot checked dumpster was related to your driver Audio MBfilt64.sys 4 + years of Creative Technology Ltd.  I'd install the most recent driver available.

  You can disable the auditor auditor/reset from an elevated command prompt

  Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Users\Ken\Desktop\070114-15906-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol of validation of the path summary *.
  Location of response time (ms)
  C:\Users\Ken\Desktop OK

  Symbol of validation of the path summary *.
  Location of response time (ms)
  Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is: C:\Users\Ken\Desktop
  Windows 8 Kernel Version 9200 MP (8 procs) free x 64
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 9200.16384.amd64fre.win8_rtm.120725 - 1247
  Computer name:
  Core = 0xfffff801 'b161e000 PsLoadedModuleList = 0xfffff801' b18e8a60
  The debugging session: Wed Jul 2 02:35:24.384 2014 (UTC - 04:00)
  System Uptime: 0 days 0:00:19.201
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ...................
  Loading user symbols
  Loading unloaded module list
  ........
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck A, {0, 2, 0, fffff801b168fb76}

  WARNING: Unable to verify timestamp for MBfilt64.sys
  ERROR: Module load completed but symbols can be loaded for MBfilt64.sys
  Probably caused by: MBfilt64.sys (MBfilt64 + 1817)

  Follow-up: MachineOwner
  ---------

  7: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  IRQL_NOT_LESS_OR_EQUAL (a)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If a kernel debugger is available, download the stack trace.
  Arguments:
  Arg1: 0000000000000000, referenced memory
  Arg2: 0000000000000002, IRQL
  Arg3: 0000000000000000, bit field:
  bit 0: value 0 = read operation, 1 = write operation
  bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
  Arg4: fffff801b168fb76, address memory

  Debugging information:
  ------------------

  READ_ADDRESS: GetPointerFromAddress: unable to read from fffff801b1974168
  GetUlongFromAddress: cannot read fffff801b19741f8
  Paged 0000000000000000

  CURRENT_IRQL: 2

  FAULTING_IP:
  NT! KeSetEvent + 1 c 4
  fffff801'b168fb76 b 488 09 mov rcx, qword ptr [rcx]

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP

  BUGCHECK_STR: AV

  Nom_processus: System

  ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre

  TRAP_FRAME: fffff880031fd960-(.trap 0xfffff880031fd960)
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = 0000000000000000 rbx = 0000000000000000 rcx = 0000000000000000
  RDX = 0000000000000000 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff801b168fb76 rsp = fffff880031fdaf0 rbp = 0000000000000000
  R8 = 0000000000000000 r10 = 000000000000f28e fffff88003041180 = r9
  R11 = fffff880031fdb00 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv in pe of na EI pl nz cy
  NT! KeSetEvent + 0x1c4:
  fffff801'b168fb76 b 488 09 mov rcx, qword ptr [rcx] ds:00000000'00000000 =?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from fffff801b1698369 to fffff801b1699040

  STACK_TEXT:
  fffff880 '031fd818 fffff801' b1698369: 00000000' 0000000 a 00000000'00000000 00000000'00000002 00000000'00000000: nt! KeBugCheckEx
  fffff880 '031fd820 fffff801' b1696be0: 00000000 00000000' fffff880 '1bdc7178 00000000 00000000' fffff880' 031fd960: nt! KiBugCheckDispatch + 0 x 69
  fffff880 '031fd960 fffff801' b168fb76: ffff93a6 ' f5176c5f fffff801 'b16bed9f fffff980' 0bb2cea0 fffffa80 ' 0d0148b0: nt! KiPageFault + 0 x 260
  "fffff880 '031fdaf0 fffff880' 08f52817: fffff880 00000000' fffffa80 ' 00000008 fffffa80 ' 0c1223d0 00000000'00000080: nt! KeSetEvent + 0x1c4
  fffff880 '031fdb60 00000000 fffff880': fffffa80'00000008 fffffa80 '0c1223d0 00000000 00000080' fffffa80' 0f891ab0: MBfilt64 + 0 x 1817
  fffff880'031fdb68 fffffa80'00000008: fffffa80'0c1223d0 00000000 00000080' fffffa80 '0f891ab0 fffff801' b1c67b64: 0xfffff880'00000000
  "fffff880 '031fdb70 fffffa80' 0c1223d0: 00000000 ' fffffa80 00000080"0f891ab0 fffff801' b1c67b64 fffffa80 ' 0f891ab0: 0xfffffa80'00000008
  fffff880 '031fdb78 00000000' 00000080: fffffa80 ' 0f891ab0 fffff801 'b1c67b64 fffffa80' 0f891ab0 fffffa80 ' 0f891ab0: 0xfffffa80'0c1223d0
  fffff880 '031fdb80 fffffa80' 0f891ab0: fffff801 ' b1c67b64 fffffa80 '0f891ab0 fffffa80' 0f891ab0 fffffa80 ' 0c1223d0: 0x80
  fffff880 '031fdb88 fffff801' b1c67b64: fffffa80 ' 0f891ab0 fffffa80 '0f891ab0 fffffa80' 0c1223d0 fffff801 ' b196e800: 0xfffffa80'0f891ab0
  fffff880 '031fdb90 fffff801' b1c67917: fffff801'b18b3a50 00000000 00000080' fffff801 'b18b3a50 fffff801' b196e880: nt! ViPendingCompleteAfterWait + 0xc4
  fffff880 '031fdbd0 fffff801' b1640521: 00030038'00010001 00000400'000001 c 8 00000000 00000000 ' 0000228 b'00000003: nt! ViPendingWorkerThread + 0x2c
  fffff880 '031fdc10 fffff801' b167edd6: fffff801 ' b1914180 fffffa80 '06b19b00 fffff801' b196e880 fffffa80 ' 06ad6940: nt! PspSystemThreadStartup + 0 x 59
  fffff880'031fdc60 00000000' 00000000: fffff880 '031fe000 fffff880' 031f8000 00000000'00000000 00000000'00000000: nt! KiStartSystemThread + 0x16

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  MBfilt64 + 1817
  fffff880'08f52817?              ???

  SYMBOL_STACK_INDEX: 4

  SYMBOL_NAME: MBfilt64 + 1817

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: MBfilt64

  Nom_image: MBfilt64.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 4a7267b0

  FAILURE_BUCKET_ID: AV_VRF_MBfilt64 + 1817

  BUCKET_ID: AV_VRF_MBfilt64 + 1817

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:av_vrf_mbfilt64 + 1817

  FAILURE_ID_HASH: {984c922a-7f81-464e-cf02-f67be39b2b6a}

  Follow-up: MachineOwner
  ---------

  7: kd > lmvm MBfilt64
  start end module name
  fffff880 '08f51000 fffff880' 08f5f000 MBfilt64 T (no symbol)
  Loaded symbol image file: MBfilt64.sys
  Image path: \SystemRoot\system32\drivers\MBfilt64.sys
  Image name: MBfilt64.sys
  Timestamp: Wed Jul 30 23:40:32 2009 (4A7267B0)
  CheckSum: 0000FF02
  ImageSize: 0000E000
  Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4