Dual HDMI display does not work with Toshiba still WT8

Similar Questions

• BD Playstation Bluetooth remote control does not work with Toshiba BT stack

  Hello!

  I've matched Playstation Bluetooth Sony BD remote control (model: CECHZR1E) with Windows XP SP3 (Spanish) PC last Toshiba Bluetooth Stack v.7.10.12 running.
  But if I press the buttons on the remote does not respond any personal computer.

  I have configured the battery Bluetooth to run the AV and AV service must send commands to Windows Media Player. In Windows Media Player, I have configured to use command AV Toshiba.

  If I press a button on a remote control, with he can link to PC, the icon changes color and Configuration Bluetooth appears the link has been established, but it is the interaction I get this remote control.

  Please, advice that tests should I use or do I have to install any additional software.

  Thanks in advance for your kind attention!

  Ensure that the AV remote control Service is running:
  Right mouse click on Bluetooth-> Options... system tray icon-> [general] tab: 'AV remote control Service' (must be verified)

• Satellite A660 - 11 M: the display does not work with nVidia drivers

  Hello world.

  First of all:

  I use the default pre installed SB (w7-64) and nothing more is installed on it, except the toshiba software.

  The problem is that, while I use the default driver installed that everything works well, if I update the nvidia drivers, I can't change the brightness more.

  It cannot be changed by fn + f6/f7
  cannot change it in windows through "brightness".
  no change in the power management profile.

  (I can put different brightness levels, but nothing is happening!) (I hope you understand what I mean)

  the only way to do it is using nvidia Control Panel.

  even if use windows utility to update windows drivers download the same drivers and there is the problem.

  the only way to fix it is to reinstall the default driver.

  but I don't want to use the prehistoric driver!

  How can I do to fix this? is this a known issue?

  Thank you very much for your help!

  Hello

  Since the nVidia page nVidia drivers are not pre-tested and not certified by Toshiba, it s not recommended to use these drivers.
  You must use graphics drivers of Toshiba because the drivers are modified and created for the use of the laptop. These drivers support own device of thermal protection that protects the graphics chip.

  I think that the issue has nothing to do with the Toshiba FN button software because brightness can be affected, even using Windows 7 power management

  I recommend to go back to the original drivers Toshiba!

• Pavilion G6 1006sh: HP Pavilion G6 1006sh external display does not work with Windows 8.1

  Hi all

  After you perform a clean installation of Windows Professional 8.1 on my Pavilion G6 1006sh I can't use my external Samsung monitor connected to the HDMI port.

  The windows installation is well unrolled without all the problems of the operating system had builtin readers for all devices. So there is no unknown hardware in Device Manager there is no sound, wifi, LAN, etc. In regards to the video card, I see two different devices. There is a generic VGA in Windows and there is an AMD Radeon HD 7400 installed M. The AMD Catalyst software has been installed successfully. In the graphic properties of windows that I can choose from two different outputs video, one is the general Windows VGA is the Radeon. However, windows detects monitor connected only on VGA General (i.e. integrated laptop display) and nothing on the Radeon so I can't use my external monitor.

  Of course, I tried to restart the laptop / monitor repeatedly, unplug / plug the HDMI cable but without success. When I plug the HDMI cable into the laptop the screen displays a message that it is connected, but there is no input signal. The HDMI port on monitor and works in the laptop I used the same setup with Windows 7 x 64 Professional without any problem. It is only the operating system that has changed.

  I tried to remove the General VGA device to force using Radeon, but after restarting it that nothing posted on the screen, I saw nothing on built-in or external monitor so I had to restore a previously saved system configuration.

  I tired to install the latest version of the graphics driver Radeon downloaded from the website of AMD, but crashed and restarted during the installation process of Windows.

  Please help me with this question or make a statement that this version of Windows is not supported on this machine and I must therefore go back to the old system.

  Configuration:

  model: HP Pavilion G6 1006 SH

  RAM: 2 x 4 GB

  OS: Windows 8.1 Professional x 64 (HUN)

  Drivers: installed and automatically updated by windows

  Antivirus: Symantec Endpoint Protection 12.1

  Thank you

  Zoltan

  Hi there @nzole

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you have installed Windows 8.1 on your system, but now you can not detect an external HDMI monitor. I'm happy to help you with this.

  First of all, in response to your question, this model is not supported for windows 8.1. It was sold only in the versions that have been configured for Windows 7.  That would mean there is no drivers especially customized by HP for this model for Windows 8.1.  It is possible that you could find a suitable drive for a model that Windows 8.1 which can be strong support enough in terms of hardware, that his driver might work, but there is no guarantee.

  Here is the support page for your model: HP Pavilion g6-1006sh Notebook PC

  Products HP - what happens if I do not see my operating system?

  Do you still have the recovery partitions, or you did a set of recovery discs, before installing Windows 8.1?

• HDMI display does not work

  I want to connect my laptop to my new external display.

  I have connected my laptop to the external monitor using a HDMI/DVI

  cable. I have had no output to the screen.

  I tried the same cable and the screen with another laptop and it works fine.

  I tried my laptop with an HDTV using an HDMI cable to HDMI and it works beautifully.

  I get an output using a VGA cable, but I want to use a digital connection.

  My machine:

  Lenovo thinkpad 15 301

  Windown 7 64-bit

  Screen:

  Samsung BX2335

  Thank you!!

  It's weird but I tried connecting to a hdmi cable to hdmi and use a converter dvi-hdmi and it worked...

• 200 M from Toshiba does not work with 10W connected/Vista Home Basic 32-bit

  Dear Sir

  I m having a problem with my Toshiba M200 laptop, it shows no text display or clear blue/green screen or different models with the connected 10W. But it does not work with the battery. Afer complete the system startup and normal screen if I connect the power 10W then works perfctly ok. The same procedure should be followed evertime I use my laptop.

  Can someone guide me weather it is a hardware problem or software related problem?

  Dipak Chowdhury

  Hello

  Have you checked with a different AC adapter?

  This seems to be a hardware problem.  You will need to contact the manufacturer of your computer to be able to find a solution to this problem.

  http://forums.Toshiba.com/

• U2412M does not work with DVI

  Previously worked perfectly with the following:

  Computer (Windows 7) supplied with monitor connected to monitor with original DVI cable

  Laptop Dell Inspiron 5547 (Windows 8.1) with a HDMI output connected to monitor via an HDMI to DVI I bought from Dell.

  Two computers worked with the VGA cable supplied with the monitor.  Now the VGA is intermittent.  I tested the cable with another computer and there is no problem.

  NOTE: I've never had the monitor connected to 2 computers, while they were on or while the monitor is turned on.

  Now, the monitor doesn't not with DVI - video display. The laptop cannot detect the monitor under control panel > display > screen resolution. It only detects the built-in monitor.  I can't check this on the desktop because there is no video display.

  I also bought a display port > HDMI adapter but read messages explaining the need for a converter, so I'll ignore for now it does not work with DP since I may have the wrong card.

  I followed the instructions to reset and diagnostics to the screen, which makes no difference. The problem is not at all, not only a bad display.

  Is still of Dell do not repair out of warranty monitors? I bought the monitor directly from Dell and I find it rather hard to believe that there is no way to repair $ 300 monitor that is only 3 years old.

  Any suggestions would be welcome. Or am I out of luck, and to buy a new monitor?

  You run properly bid. He says on page 31, 'you can run diagnostics integrated only when the video cable is unplugged and that the monitor is in self-test mode'

  So no DVI or VGA connected monitor.

• iCloud 5.2.1.69 does not work with Outlook 2016 (16.0.6965.2053)

  I installed the new iCloud (v5.2.1.69) and found that it does not work with Outlook 2016 (16.0.6965.2053). There is no button "Options"... "to"Mail, Contacts, calendars and tasks"(see photo). In addition, the iCloud Outlook add-in does not display in Outlook. I tried to reinstall the Office 365 and iCloud, but nothing has changed.

  

  I have exactly the same problem with the latest version of iCloud.  I have Outlook 2016 and 10 Windows and when I try to install iCloud there saying "set up" next "Mail, Contacts, calendars and tasks.  I left it for hours and it does not go beyond this point.  Outlook displays the listed add-in but it is not doing anything.  I tried to remove all of the Apple software, and then reinstall iCloud without result. I've deleted and reinstalled MS Office and then tried to reinstall iCloud - once again no luck.

• Why this scriipt does not work with Firefox? < embed src = "News2008Fall.pdf" width = '615' height = '3200' > < / embed > "

  Please tell me why this script does not work with Firefox. It works with Safari. Here is the page that includes the script: www.lionsgatehoa.org/newslettertest.html. Thank you. Tom Engleman

  Here's the script in my html document:

  < embed src = "News2008Fall.pdf" width = '615' height = '3200' > < / embed > "

  Edit: removed # phone

  Works for me on Linux.
  
  Your system details list does not display the Adobe Reader plugin, so you'll have to (re) install this program.

  See:

  • https://support.Mozilla.org/KB/using+the+Adobe+Reader+plugin+with+Firefox
  • http://KB.mozillazine.org/Adobe_Reader
  • http://get.Adobe.com/reader/otherversions/

• Satellite Pro M40X does not work with battery

  Hello

  I have toshiba satellite pro m40x laptop. It haves apromaly 11 months.
  In recent weeks, the laptop does not work with the battery.
  With the battery and the power running, if I turn on the laptop, it turns off after 10 seconds. If I only turn the computer batteries, laptop not respons.
  The laptop works without battery.

  I have rma is not the portable and the technical suport fixed the battery because it only 6 months guarantee.

  I'm sure that battery modules were not upset because I used the battery not very often.
  I disassemble and I wached the control circuit. I'm sure that something of them, it was broken, but I can't fix it without the schema.

  Another question is if I can change the graphics card to laptop. Is actually a x600se but I need power more graphic

  I hope you can help me

  gretings

  Hello

  It is not easy to say what the problem is here. Have you noticed something strange with LED power control? It is also possible that the electronic power supply do troubled. Try to talk with authorized Toshiba and explain the situation. If you open only one Notepad, uneducated, it may be simply worse.

  Graphics card cannot be updated as on desktop computers. I put t know how it is on this model laptop but the graphics card is fixed on the motherboard and cannot be traded.

• Portege M200 - pen does not work with the screen

  So I bought a pen for M200 and reinstalled the operating system.
  Now I M200 with Windows XP Tablet PC edition, a utility Screen Rotation and usefulness of the stylus button. Now Pen buttons work fine with my new pen, but the screen itself does not work. I mean, the stylus does not work with the screen.

  I have a mouse, and another menu pointing devices in Device Manager and it includes the following submenus:

  HID compatible mouse (I use the random DELL mouse)
  Mouse PS/2 Cimpatible (?)
  --------

  I think there must be something else...
  Please tell me, forum, what drivers should I download to get the pen to work?

  Stand by. Are you using the original image of recovery Toshiba (operating system) or you have installed your version?

• External Combo CD-RW/DVD-ROM drive does not work with USB 1.1

  Hello world

  I have a problem with the PA3352E - 2 CD 2 CD-RW/DVD COMBO USB 2.0. A colleague is owner of this car and use it on a NB DellC610 with Windows XP on it. The problem is that the drive does not work with this type of nb (with a NB from Fujitsu-Siemens newest there no problems); There is always an error message about "surge." I think it has to do with the USB 1.1 because the player seems to be built for USB2.0. Is it possible to use this drive correctly with usb1.1 (ok, the flow is low, but more important is it works in general)? Unfortunately his nb will not work with USB 2.0...

  Thank you very much in advance.

  Kind regards
  Steffen Rieger

  Hello

  AFAIK this external must have a power adapter. You use it too? I'm not 100% sure, but there are difference how much power Gets the USB slot. Toshiba notebooks is around 500 my and some producers another laptops send between 300 and 500 my. The external device requires approximately 700 my.

• Portege M200: Rotation utility does not work with the new driver

  Hello

  I have a Portege M200 with the Gforce 5200Go. Since the last officially available graphics driver is the 46,44 I changed the 93.71 and installed. But the Rotation Utility does not work with this driver.

  When I use the driver nv for the rotation of the screen the tabletpen's is more synchronized: move the tabletpen left results in movement of the mouse to the top etc.

  Anyone any ideas?

  Hello

  You must use the page of the Toshiba driver graphics driver and not the original on the graphics card manufacturing site

• Satellite A300 - built-in Chicony webcam does not work with Win Live Messenger

  Hello

  I just bought a * Satellite A300-1MC * (works on Vista Home Premium) and downloaded Windows Live Mail and Live Messenger.
  The integrated webcam does not work with Live Messenger; and when you select the tool, Audi + Vieo Setup in Messenger I get thye following message: "we are unable to launch the Audi video installation.
  The webcam works fine with the Camera Assistant Software.

  I tried: 1) killing the AC software and from Messenger. (2) dowanloading one driver webcam Toshiba Web site; (3) update of Windows Vista
  None of the above works.
  Any suggestion received with joy...
  Thomas

  You can try to install the CAM such as ManyCams software - http://www.manycam.com/
  Basically, the program to access your webcam video and redistribute it as a video device ManyCam.

  Richard S.

• Port replicator does not work with Satellite P100-160 & Vista

  I just bought a Toshiba duplicator (part number: PX1173U-1PRP) but it does not work with the o/s Vista pre-installed on my P100-160. Can someone tell me where to find the Vista drivers for this device?

  It seems that the standard driver is not compatible with Vista and so you will need a new from the Toshiba page.
  You must remove the old driver and then install the new version.

  Good luck