Dubble side Officejet X476dw print

Ladies and gentlemen,

Topic: Mac OS X10.9.1 and MS WORD:

I'm trying to do double side printed with my new HP Officejet Pro X 476 MFP DW . I can't find this button or menus.

Please help me.

Thanks for your response!

Jack

Double-sided printing is normally defined in the software, but you can also set this slot
Duplex/configuration/device Setup/Print Settings. This set to "Mar" and you have double-sided.

Good luck. I would like to know how it works.

Tags: HP Printers

Similar Questions

  • OfficeJet Pro x476dw: How can I add fonts to OfficeJet x476dw printer?

    I just installed a new Officejet Pro x476dw all-in-one.  It's a great printer.  The question I have is we use fonts Oswald as the standard of our company and when I try to print this it does not display properly.  I ran reports and as you can see that Oswald is not on the lists of fonts so I think that we must add to the printer.

    My goal is to get fonts Oswald print correctly.  Please let me know what I have to do to get there.

    Robert

    The printer driver may include an Advanced Preferences option to "Send TrueType as Bitmap".

    If selected, this will cause several (rather than one or two scalable) bitmap soft fonts to download, one for each size of font required.

    If there is a firmware issue interpreting fonts downloads soft, maybe it's that this only affects the scalable fonts, not only bitmap fonts, so it is perhaps interesting to try?

  • HP Officejet 6000 only print left side of controls. prints everything well.

    HP Officejet 6000 printer, system is Windows7. We use an insurance agency software and I am trying to print checks and the printer only prints the left side of the check and heel.  The software is ok because I can print checks very well of our generalization printer that uses the entire office.  I can print emails, documents, etc. of the Officejet and they print the entire page.  It's just the checks that print weird.  This has even puzzled IT society.  I tried the HP print and Scan Doctor thing, and he said that everything is fine.

    Any suggestions?

    Thank you!!

    I'm back in business now! Print controls very well. We all remote on a server and I got the printer installed on my desktop, but not inside the server, and I don't even think it.

    Thanks for your help!

  • HP Officejet j6480: printer has no connection wireless, ran again in settings page network & wireless test report

    It all started when I got a message that my cartridge on the left was not aligning... it was a charge... I'm gone online, read should I unplug the printer & pressed the button for 1 min... who sets the cartridge message... now its not to communicate with the laptop. Spend 2 hours with Costco concierge thinking it could be the Acer Aspire V... we crossed the Powercycle, changed the cartridges, clean the print head, wired the laptop to the printer & removed & added drivers/software... He said he has never seen this before & he couldn't understand... I went to configure wireless settings printed with the cable, then he used to always recognize laptop mobile phone acts as its no printing, no jobs in the QC... will also not print with usb cable... 1/2 worn with AT & T they are useless... Help! It's exhausting. Thank you.

    Hey @extremelyP,

    The 'Send Fax' screen was to appear, it doesn't appear that you have added the driver for Deskjet replacing portion of your printer Fax. Normally, under devices and printers, you will have two copies of your printer. The first example would be the real printer driver. The second copy would be the Fax from your computer's fax driver part. In saying this, I will just cancel you it that we just finished and test print. If the printing problem persists, we will add the driver replacing again and things must be a lot smoother.

    Step 1: Remove the driver:

    1. Open the display Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key on the bottom right of your keyboard to the left of the Ctrl key
    2. On the start screen, type programs and features
    3. Click on programs and features to launch the tool.
    4. Under programs and features scroll to the bottom of the list and are looking for your HP Officejet. If you see your printer click on it and choose Uninstall.
    5. Please follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete please close programs and features
    6. Then, please reopen the Start screen. This time type devices and printers. Click on devices and printers to the start
    7. In the file devices and printers, if you see your HP Officejet still listed, please, right click top and select "remove device' or 'Remove'.
    8. Once the device HP Officejet was deleted please click left once on any device used to indicate the heading Printers and fax machines . You just want to highlight the device
    9. Then click on the print server properties at the top
    10. Under the print server properties, click the drivers tab
    11. If you see your HP Officejet driver showing under the list please click on it. Then, click Remove. Click remove the pilot from the box pop up
    12. Click OK
    13. On the print server properties window, click apply and OK
    14. Close Devices and printers

    Step 2: Install the Driver:

    Please click here to download and install the driver package for your printer. Once your HP Officejet is reinstalled successfully please test printing. If the printing problem persists, we will still add the other pilot.

    Step 3: Adding a driver replacing:

    1. Open the display Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key on the bottom right of your keyboard to the left of the Ctrl key
    2. On the start screen, type devices and printers. Click on devices and printers to the start.
    3. In the devices and printers folder right click on your HP Officejet J6480 (not the Fax version)

  • Left click on printer properties
  • Left click on the Advanced tab
  • Left-click on new driver
  • When the new driver window just press 'Next' until you see a list of manufacturers on the left and a list of Printers on the right.
  • Select HP as the manufacturer on the left
  • DeskJet 6980 select the printer on the right. Choose HP . If Deskjet 6980 does appear to only select "Windows Update" at the bottom left and once the update is completed, you will be able to select Deskjet 6980.
  • After selecting Deskjet 6980 hit Next to complete the wizard driver new
  • Under the printer properties window, select "Apply", but don't hit not OK
  • Select the general tab
  • Rename your HP Officejet J6480 printer
  • Click OK
  • Then, right click on your HP Officejet again and select printer properties
  • Click the device settings tab
  • Under Installation Options click on the drop down menu "unit duplex (for printing on 2 sides)" and replace the "installed".
  • Once the settings have been adjusted click apply and OK
  • Once the other pilot has been added successfully, please test print to see if the problem is now resolved.

    Please let me know if this procedure works for you. Good luck!

  • HP officejet 6978 all in a single p: hp officejet 6978 printer all in one, appearing to create its own wifi signal

    After I had my printer connected and working properly, I looked in my wireless options to connect to the internet. I have hooked the fine, but in these choices, was a connection option in/with? a hp officejet 6978 printer all-in-one. Before you buy and hanging upwards, connect this option was not there. Now, this is the case and showing a stronger than my router signal. This printer is able to be a wifi connection? Any ideas?

    That's great. I see nothing in the instructions, and the seller does not mention either. It seems to me that this feature would be another selling point. I do not necessarily want to disable it. I like the idea of having him as a backup, if my current one falls down, would only be an option? If so, I tried to connect using pw of my router, but cannot connect. This would have a default PW? is so, how do I find it. So thanks for your help. As I said nothing even alluded to this function...

  • HP Officejet 5740: The Officejet 5740 printer is sending a document feeder of error message cannot read original documents

    HP Officejet 5740 printer sends an error message indicating that the document feeder could not recover the original document.

    Hi @angelahouser042,.

    Welcome to the Forums of HP Support!

    I see that you have problems in your ADF on your HP Officejet 5740 e-all-in-one printer. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I recommend that you follow the steps in this guide:

    Please follow: step 3: clean the ADF rollers and separator (optional) buffer.

    Hope that answers your question. Please reply to this message with the results. Thank you for posting!

  • Install HP Officejet 6310, printer all in one

    I loaded and began to run the instalation of the complete software for the HP Officejet 6310 printer all-in-one on my new Dell Inspiron N7110 Notebooks. It runs Windows 7-64 bit. After the end of the excerpt, it stops just running. It should go in the installation process, but it doesn't. Can someone help me?

    See if you can find the folder of extraction of HP that he created, then run the installer in there.

  • HP Officejet 4355 printer suddenly start very slow printing! HP technician advice needed!

    Hello
    My all-in-one HP Officejet 4355 printer start suddenly feel very very slow! I've had it for 4 years, and God never gave me any problems (maybe minor once, but never really made me mad), as I used it very often at home and at the office. I always buy the HP original ink cartridge (only once, when I wanted to see how works the charging - it's not) and now the last cartridge has been in the printer for a month or two, nothing unusual, and suddenly my printer starts to print very very slow, if normally it took 10-15 sec for a black and white page now it will take 10 to 15 minutes. Could someone suggest help?
    Please don't talk about the computer/Windows/USB settings, they all work very well. I unplugged the printer from the PC and don't "align the print cartridge. First step, the printed area, took 10 minutes, second step, part of scanning, does not pass. It says printer cannot allocate the alignment page...
    Moreover, I did look around for answers and found that some people say it's a fault of the ink cartridge. But I used this cartridge for a few months now, it's almost, but not yet finished, it was perfectly up to printing. Impressions during this issue come out OK, 7 out of 10.
    Anyone have any ideas? If I could attract professional assistance of technicians of HP, it would be perfect.

    Thank you.

    © RedStarLimitless ©

    Although they still ink cartridge may fail and give the results you see, where the printer made a bandage and wait 10-15 seconds for the next Strip. This is caused by the failure of one of your cartridges.  Remove each cartridge and clean the contacts on the cartridge and printer can solve the problem.

    I don't remember if the Officejet 4355 reserve mode supports, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

  • OfficeJet 4622 prints not Windows 8, but will print from Linux

    Hello world

    I have an OfficeJet-4622 printer set up on my network (wireless) and two computers. The first is a portable computer running Windows 8, and the second is a desktop running Ubuntu Linux. Both have HP (and HP Setup) drivers installed. When I try to print something from the Windows 8, it will start printing and then say that year error has occurred. The print will be print part of a page, nothing or half of employment and a white sheet.

    However, if 'copy' of the printer, or print from the Linux computer, everything works fine. One thing to note is that I'm using remanufactured cartridges, but they should not cause a problem on a single computer only.

    I am at a loss here, so any suggestions on what to do to solve this problem are greatly appreciated.

    Thank you and have a nice day.
    Patrick.

    I think I solved the problem eventually. On one of the posts of post-its, it linked to a page where you can use the automatic installation wizard. I did, and it reinstalled my driver (s). He had said the previous installation was not completed successfully. So I'll try again to print. The print came out fine. If the previous installation must have been the problem.

  • Why print head hits the sides of the printer?

    I have a "Hp Photosmart c5380 All in one ' and I don't know what to do with it. It can be fixed with a new headprint or should I throw?

    I tried all the things people were saying on the internet: a full reset on a menu hidden in the printer; cleaned the strip of celluloid at the back of the printhead and... nothing... headprint hit the sides of the printer.      I had to get out of the print head (without print head and cartridges inside) so I can try without it, but the printer does the same thing. What can I do?

    At this point given that the error message cannot be allowed to access the menu, and we did the resets mentioned in the posts above on this thread, sought to replace the product. You can always take part in the program of upgrading HP. This is where you can find to get a camera reconditioned with a warranty of complete plant at a reduced price. The number for U.S. and Canada customers is 800-474-6836. Other clients can find the contact information for HP at this link here. I hope this helps.

  • HP officejet 6500: HP officejet 6500 printer

    My HP officejet 6500 printer do not print one color... .we just put new ones in... He took command of printing and the paper comes out of the Virgin.

    I went to the HP support team and they had a video to help with "Troubleshooting", they showed me how to reset my printer.  There were several options which I had already tried... so I did the reset partial... .or you unplug and wait 20 min... then hold it at the same time # and number 3 and reconnect the power chord at the same time... It took 7 minutes for the printer run the test of the colours that mine passed... and my printer works now!   Thank you very much.   HP team

    Ma-donna

  • OfficeJet 4620: printer keeps going offline

    OfficeJet 4620 - printer keeps going offline.  If I turn it on and turn it on, it's online for a while, but it disconnects again.  My IPad can't print on it. My Windows laptop, 10 shows as offline.  I can open his web page by entering the IP address in a browser and can ping it, but it also shows offline.  It is very annoying to have to reset the printer whenever I want to print to it wireless.  Is this to say that the wireless antenna is going wrong?  Should I buy a new printer?

    I found what caused my problem when troubleshooting the installation of a new printer. I have 2 range Extenders. They had the same ssid as my router. One of the reports of tests of the new printer had a warning about it. I changed the range extenders in order to have all 3 different SSID. Now when the ipad & printer are that both connected using the ssid for the range extender in the room with the printer, there is no problem of ipad impression. My old printer is fine.

  • HP Officejet 6500 e710n-z principal: impossible to completely remove the software after the replacement of the HP Officejet 6500 printer

    I replaced my Officejet 6500 printer and removed the software using the 10 software removal tool windows.  The software has been removed, but a message appears everytime I start the computer saying that the software cannot find the 2 support files.  I can turn off the message and continue the start up, but it's still a nusiance that I would rather not deal with every time I start my computer.

    Hello

    Open Windows Explorer and type the following in the address bar:

    %AppData%\Microsoft\Windows\Start Menu\Programs\Startup

    Remove the shortcut to "Monitor alerts ink" and restart your PC in order to ensure that the error no longer appears.

    Kind regards

    Shlomi

  • HP 8600 officejet pro printing issues

    Hello

    I have an officejet pro printer hp8600.  I have connected to a network. I had to reinstall Windows 7 64 bit on my computer following an accident.  This meant also to reinstall the printer drivers as well.  I am able to print from Word, however I can't print from internet.  I get this message: "there was an internal error and Internet Explorer is unable to print this document." (Internet Explore 11) I downloaded pint and Scan Doctor 4.2 and made 'issues of difficulty printing' and all checks very well.  In my view, that the problem is that I can't solve my printer because it has a warning sign in my area "devices and printers".  When I run the troubleshooter, it is said that it cannot identify the problem.

    Thank you

    Deflace

    Thanks for your response, Deflace.

    Understand that you have reinstalled the software.

    For troubleshooting further, could remove you & reinstall the driver software according to the Guide to ensure that the software is installed correctly.

    Please help make sure that you get the latest Firrmware and update by the link as well.

  • Since the end of the Windows 7 upgrade my HP Officejet J4500 printer will not print. Error Msg said "did not supported operating system"? Do I have to buy a new printer?

    My HP Officejet J4500 printer prints are no longer the documents since the installation of Windows 7?  Msg error starting of installation has the operating system not supported?

    Your problem does not have Windows Update features (compared to the upgrade of Windows).

    Contact HP support.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Maybe you are looking for

  • Automatic connection does not work after re - install

    Visited bad link in Facebook! Subsequently, forced to re - install Firefox - from scratch! Saved some files profile as Favorites, passwords, but no extension tricks. Re-installed FireFox after removal of ALL titles I could find in Program Files, Prog

  • Satellite A200 - password disk HARD 'frozen' in the BIOS

    Satellite A200 computer laptop does not recognize the HARD drive.Reconstruction of the disk with Vista or XP - Pro (on another machine) have proved to be unsuccessful. Originally, continually blue machine armored and quicky restarted, Machine was inf

  • Compaq Presario CQ61-313US: laptop fan

    Hi, my laptop fan is not working properly, everything first, he constantly made a lot of noise, but could be reduced to silence with a soft bump, then, he kept just make noise at all, then, all of a sudden, it didn't work at all and kept the laptop o

  • I lost my cd foo HPdeskset 1050 J410 series

    How to get a copy or how dowlow?

  • is deframenting the hard disk and the registry of the same thing?

    I want to know about defragmentation. I see one of my apps, there is a key to defragment the registry database. So, I see; Defragment the hard drive. While I see; disk defrafmenter. What is the difference between all of them?  Thank you to answer. An