due to virus infcetion I reinstall Windows xp since then I could not see my folder and the files that was in my area of connection. could you help with this thank you

Similar Questions

• Installed Windows 7 on my HP Compaq nw8440 but unable to find the drivers that only Vista drivers are ther

  I just install Window 7 Home Basic Edition as final Version was my HP Compaq nw8440 too slow. After installation, I am unable to find the drivers and all drivers available for Windows Vista. No driver VGA, No Finger Print etc. And the Internet is also working slowly well my connection giving the same speed. Please help me

  You are the very welcome.

  I do not take up that simple...

  Try the driver windows 7 for her at the link below and you will need the W7 software protect tools because I do not think the Vista software works.  Ditto for the quick launch buttons.

  These drivers have been extracted from the 6910p who was the first series HP business notebook, support for windows 7 and the one that follows in the line after the nc6400 (the 14.1 "model of your screen).

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-66699-1&prodTypeId=321957&prodSeriesId=1839152

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3357377&prodNameId=3357378&swEnvOID=4053&swLang=13&taskId=135&swItem=ob-78740-1&mode=3

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3357377&prodNameId=3357378&swEnvOID=4053&swLang=13&mode=2&taskId=135&swItem=ob-77198-1

  Paul

• I've updated my pc from windows xp to windows 7 since then I can not get my headset & mic to work. I know very little about computers and I need someone to help me, please.

  I've updated my pc from windows xp to windows 7. Since that time my headset & mic do not work. I know very little about computers, so I need some help, please.

  Not all Windows XP PCs, or their hardware is compatible win7.

  Usually if the PC manufacturer, or the manufacturer of the motherboard so a generic desktop computer provides no specific drivers for win7, its does not work

• is it possible to see EVERY folder and file that exists on the drive hard on one screen and in one place just as you could do in much older versions.

  OK... so I had an accident and there was good and bad news... the good news is that I was able to get it started and running "Save", but the bad news is that instead of giving a new image system clean (as I expected), I had a bunch of random pictures and other unimportant things and many important things seems lost but I think that its still all somewhere.

  now... to the front sometimes there was a windows program called "windows explorer" that would put all folders and all files that was on the hard drive on a single screen, and you can search through them.    When I shoot to the top of the Explorer windows on win 7, I get a page with a bunch of files minor that some things in them, but not what I see already...

  so... my question is simply "is it possible to see EACH file and a file that exists on the drive hard on one screen and in one place just as you do in earlier versions.    I did some research and went thru records that he will show me but I explicitly want is to see EACH file and folder that exists on one screen...

  is it possible in win 7?   and if so, how, please

  Steven

  Steve,

  Are you talking about the Windows Search function?

  In Windows Explorer, open the top-level folder that you want to watch in [C:\Users\yourusername\Documents or whatever it is you want] then look in the upper right area - there is a white box to the right of the address bar.  This is the search box.  Type * and then pause and it lists all the files in this top-level folder down through its subfolders.

  You can find more information about using Windows Search in

  A Guide to using Windows Search; Two Alternatives to Windows - Wiki

• How do you rename the files that make up the VM

  Hi guys

  I need to know how to rename a virtual computer in Vsphere Client.  If I right click on the VM in Vsphere client and rename, which is not rename the folder and the files in the data store for this virtual machine.  I have rename the VM to what I want, but the folder and files inside still have the old name.  Is it possible to rename that I don't know?

  under the direction...

  Hello.

  A cold migration or a Storage VMotion will make files and directories match what you have re-named the VMS in vCenter.

  Good luck!

• I just reinstalled windows xp. later, when I re-installed office 2000 I wasn't able to make updates. o2ksr1a.exe failed during download. all other updates do the same thing or require that I have sr1/1 has. What is happening with this?

  Office 2000
  Cannot install updates

  Mac_the_Nike wrote: [I just reinstalled windows xp] Office 2000
  Cannot install updates

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  NB: Computers running under that WinXP SP2 will NOT be offered additional updates of security reviews, automatic updates will stop working, and Windows Update Web site will be unavailable after July 13, 2010, until that SP3 is installed.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When you try to install Microsoft Pinball Arcade in Windows 7 Home, I try to run setup.exe and the message that is missing a dll.

  original title: pinball arcade problem

  When you try to install Microsoft Pinball Arcade in Windows 7 Home, I try to run setup.exe and the message that is missing a dll.  Help, please. Thank you.

  This file is missing?

  Since it is an old game, it is possible that it will simply not work.

  Try to use the compatibility options to run the installation - the game is designed for Windows 98, but try different options and if that does not work:
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

• I have instaled my creative suite the other day because I had to reinstall windows 7, I had problems while I had to do a system retore that wiped out the installation. I try to reinstall it and that is to say that the Setup program will not initialize, it

  I installed my creative suite the other day because I had to reinstall windows 7, I had problems while I had to do a system retore that wiped out the installation. I try to reinstall it and that is to say that the Setup program will not initialize, it's because I'm trying to reinstall it in a short period of time

  See link below and check:

  https://forums.Adobe.com/thread/1848277

• I had to update my windows computer and you can no longer open Photoshop cs2.  trying to find help with this new system is not easy to use to put it kindly.  I downloaded the program and don't have the available key.  I tried to sign in but where.

  I had to update my windows computer and you can no longer open Photoshop cs2.  trying to find help with this new system is not easy to use to put it kindly.  I downloaded the program and don't have the available key.  I tried to sign in but where.

  For Photoshop CS2 activation has been reprocessed, so your original drive and the serial number does not work.

  As an owner of CS2, Adobe has a copy without activation and serial number, to which you are entitled.

  The serial number is to the right of the download link for Windows. You'll need this one, not your old number.

  Get them here: download Acrobat 7 and CS2 products

• Video error: the files needed to display video are not installed or not working not properly. Please restart Windows Media Center...

  Please help - it's driving me crazy! I got this to work!

  I am using Vista Ultimate and a connection (cat-5) ethernet to an xbox 360 as a Media Extender (via a Linksys router). I get the error of the video:
  "The files needed to display video are not installed or not working not properly." Please restart Windows Media Center or restart the computer "."

  I have a Happauge PVR 150 TV capture card installed, and you want to watch TV and my video files Via the Xbox 360. I can see the guide for lists of TV programs, but not to look at them without getting the message above.  I can also put in place a program to record, display the video thumbnail, but not play. Video files only will play are videos very select few years recorded only where there is.

  My graphics card is an ATI 2900XT - 512 MB of ram, with the latest drivers.

  I've seen a number of discussions on the web that describes the same (or similar) problem, but none of them seem to have no solution.

  I had Norton Internet Security installed and it has since withdrawn because of the firewall. I had thought, it could be a firewall issue, but it is not. I'm now using the Windows Firewall for now.

  I deleted and reinstalled the Xbox as an Extender media several times... no help. I have re-installed the complete drivers for the video capture card, it has not helped either. I checked and double-checked the settings on my router as well.

  The xbox is set for the share on my multimedia computer. The correct files can also be programmed for sharing.

  On the PC in Windows Media Center, I can view the TV programs, record programs etc etc etc all work.

  Any help would be really appreciated!

  Hello Lowwatts,

  Microsoft Xbox 360 community

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to

  Microsoft Xbox360 community and would be better suited to the Microsoft's Xbox 360 community. Please visit the link below to find a community that will provide the support you want.

  Community Microsoft Xbox360

  Try following the steps in this article:

  Enjoy Windows Media Center on your Xbox 360 with your music, photos, recorded Live TV * and online media

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My wife tried to update firefox and since then it will not open. When I click it a window appears and says that I have to finish the upgrade a previous version by restarting. When I reboot nothing changes.

  My wife tried to update firefox and since then it will not open. When I click it a window appears and says that I have to finish the upgrade a previous version by restarting. When I reboot nothing changes.

  If the files have already been downloaded, then delete the files in the folder updates\0 and updates.
  
  You can also remove active - update.xml, or even updates.xml (stores the history of update).

  • http://KB.mozillazine.org/Software_Update (Update works not properly)

  C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
  (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)
  

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox if possible.

  • Do NOT remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• When I opened the window "save the Page under", the drop-down box file name indicates the files that have been saved a long time ago. It is not cleared by a function 'clear history' that I can find. How can I erase this?

  1. Question

  When I opened the window "save the Page under", the drop-down box file name indicates the files that have been saved a long time ago. It is not cleared by a function 'clear history' that I can find. How can I erase this?

  Hello.

  I think this is a related issue of Windows, because it is the Manager to save the windows file that we are talking about here (right?). You should contact Microsoft for help with this one, I think. You expect to be able to delete entries simply by touching delete on your keyboard when they are concentrated (that is how it goes for the removal of the form entries specific autocomplete in Firefox), but I have not tried.

  I'm sorry I can't be more helpful.

• [Error number: 0x8024400A] Need help with this error... I reinstalled XP SP1 and I can't get an auto update that's simple to install, just get this error every time

  [Error number: 0x8024400A] Need help with this error... I reinstalled XP SP1 and I can't get an automatic update that's simple to install, just get this error at each time HHHHEEEELLLPPPPP! Thank you

  I had the same problem.  But finally found a solution.  If your listing is similar to mine, then keep.  XP Media Center Edition 2005 (sp2).  AMD Athlon 64 x 2 Dual-Core, HP a1630n desktop computer.

  Go to the HP website, search for sp37394-XP sp3 Upgrade utility Microsoft for systems equipped with AMD processors.

  I had the same 0 x 80240036, 0x8024400a error, but realize my problem was really get manually downloaded sp3 and installed without continue loop crashing and not error messages.

• Windows XP Service Pack 3 is not installed because of a missing file beetov9

  Windows XP Service Pack 3 is not installed because of a missing file beetov9... What can we do?

  See if aid that I pasted here from previous messages and noted the reference material.

  KrisT2 has a solution and gbhall was also a solution that can help you.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/thread/351ca845-3df8-4C9F-B456-fbedf0abfa8a

  "When the 'beethov9.wma error' rises (about 1 1 / 4 h. in the update),
  Open Windows Explorer and navigate to C:\Documents and Settings\All
  Users\Documents, then right-click on Documents and make appear the properties, then
  the sharing tab check the box "allow network users to change my files '.
  You don't have to be logged on as administrator. Retry the copy. That's it - I
  don't know why either of you, technology experts could not have said it simply. »

  / KrisT2

  Other-

  This is a known bug 'Dumb MS' and very simple to fix. It is simply that the installer wants to put a bit of a music (the standard windows sound) file in a particular place, and the directory does not exist on some copies of OEM Windows XP home.

  You just need to create the folder he wants before rerunning the SP3 update. Not at the moment, I can't find a link to the exact thing, but if these directories do not exist, create them. You must be logged on as administrator user to do this.

  The file beethoven.wma wants to be in the folder "C:\Documents and Settings\All Users\Shared Documents\Shared Music".
  OR maybe "C:\Documents and Settings\All Users\Documents\My Music\Sample sounds\" on XP-Home Edition

  However, the "All Users" directory down may be missing or not have NO defined permissions.
  To fix it, right-click on "All Users" and click the option 'security '.

  Click on the security"" tab.

  Click on "Add..." »

  Click on 'Advanced... '. »

  Click on "search".

  In the list below, to select multiple click (Ctrl-click) to select:

  Administrator
  Directors
  "Your username".
  Click ok all the way out and try again.

  Last edited by gbhall; http://www.TechSpot.com/VB/topic127254.html 09/05/2009

• I am using Windows XP Pro SP3. IE8 or FF8 can open all the links that appear in my subscription newsletters.

  original title: links in e-mail newsletters don't work

  I am using Windows XP Pro SP3. IE8 or FF8 can open all the links that appear in my subscription newsletters. The message I get is:

  Firefox can't establish a connection to the server...

  Because this happens with both browsers, I suspect that some settings in Windows is the origin of the problem - maybe an update. Everyone knows about this type of behavior? Someone at - it suggestions for me?

  Hello

  This information should be useful.

  1. the HOSTS file would have an impact on all browsers. If you do not deliberately use the HOSTS file to block some websites, run the FixIt in this article to reset (clear on) the HOSTS file.
  How can I reset the default Hosts file? :
  http://support.Microsoft.com/kb/972034

  2 key is only, but go to Internet Options > privacy and try a cookie of low value or accept all.

  3. from security on the IE command bar > InPrivate filtering settings, disable filtering.
  Always safe > Filter SmartScreen > disable the SmartScreen filter.

  4 disable third-party security programs (antivirus, antispyware, firewall, etc.) * just long enough * to test some links.

  5. similar to the #3, but more in depth...
  The clean boot troubleshooting, try.
  331769-how to perform a procedure to clean boot (XP & Vista)
  http://support.Microsoft.com/kb/331796

  Don