Dumping Vista to XP in Pavilion s3600v (office slim) - how to install

Similar Questions

• Pavilion series 17z - F2: how to install memory in laptops series 17z - F2 flag?

  How do we install the memory in laptops 17z - F series (17z-F200, product L2H13AV) Pavilion?

  HP seems to have no guide available for this series of model maintenance. What is happening with this?

  Please, do not offer the generic (and obsolete) Pavilion 17 Notebook PC Maintenance and Service of Guide. It seems not to apply to 17z - F series. This guide indicates to remove the low service panel which I could have understood that mine. However, 17z - F series does not appear to have removable panels at all. I took a shot near the Pavilion 17z-F100. And it is not any removable panels on the underside, with the exception of the battery. So, I guess that 17z-F200 are the same.

  I am a computer technician. And this is the first laptop I've seen without signs of service. I'll probably have to remove the outer shell together to install the memory (or replace the hard drive when the time comes). But, any laptop I've worked on in the past had its own special table hidden screws or special tricks for disassembly. So having an interview guide is a necessity to prevent the pests from plastic, clips, guides, mounts etc..

  What about this one:

  Pavilion manual 17z

  Don't get started me on that. It is one of my hobbies, too. HP is not the only one to do that. Acer and Toshiba, etc. also sell 'closed' systems now. I hate it. I will absolutely never knowingly buy one, but I spend a lot of time here answering questions like this. Good luck and let us know how you do. Looks like you'll be fine.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• I need help, find how to install Windows Vista on a HP Pavilion 6475z disk.

  I need help, find how to install Windows Vista on a HP Pavilion 6475z disk.   I had to replace the hard drive, so he has nothing about it and I added more ram, but I replace the cd player so it is not yet installed on the HP.   So I was wondering if I could put the installation disc in my laptop cd/dvd and connect computers by usb ports and install it this way and if not how can I?
  
  Thank you

  Hello

  You are welcome

  If the CD/DVD drive in the works of PC Gateway, you can (at least temporarily) remove it and install it in the HP, you can run your recovery disc and reinstall Vista.  Once everything is running on the HP, you can always remove the CD/DVD drive and reinstall it in the gateway PC if you wish.

  Kind regards

  DP - K

• Vista Home Premium: Startup time and office flaws often requiring the log off / log on to Correct

  At all to being able to help solve these problems successfully:

  When I bought my office, it came preloaded with Win XP (a FANATASTIC/s o!) with an installation disc free for Vista Home Premium. I have installed Vista until recently due to support XP being more available.

  Problems currently on a regular basis (every reboot) are:

  (1) long startup (sometimes nearly 10 minutes)

  (2) the "Blacktop" (AERO) Vista appears generally "gray" (like Win Classic) but with VERY little
  Services (icons missing, unable to run diagnostic programs, etc.).

  In this situation, I usually 'Log Off' and 'Connect' again and it fixes the problem-"bitumen".
  is back with the functions of the al. Despite this, I'll restart desktop using Services.msc. for all the functions

  are available.

  System information:

  (A) AMD 64 Athlon 3500 + (2.20 GHz)
  (B) 3.00 GB RAM
  (C) Vista 32 Bit (SP1 and SP2 installed (all updates current)
  (D) ATI Radeon XPress 200 Series (current driver)
  (E) all drivers are current (no changes required)
  (F) update BIOS (not not required)

  Note:

  (1) I am the user ONLY if the 'Default' options are regularly 'Log In' (as admin) - no guest accounts, etc.

  (2) I reduced some Desktop effects, which are not necessary (Menu Fade in and out, etc.) according to

  instructions of MSFT community on how to do this and what is safe to disable. This helped a little
  and I don't miss these features.

  (2) I deleted the "Windows.old" folder (as there was nothing to add to the Vista o/s).

  (3) I have NOT deleted the Partition which was part of the Win XP System Restore feature as)
  "I don't know if I should as well as to think that I should keep this system offline and running XP).

  (4) I use a security program that securely wipes deleted data, cache password, etc..
  Under Win XP, there was the possibility of "Protect Restore Points" (not required for Vista).
  I do NOT use the option "delete shadow copies".

  My questions are:

  (A) what is the cause of the boot extended both office and how to tackle it successfully?

  (B) what is the problem with the desktop computer? I don't mind the Log in and out a lot but would like to get rid
  me of this disadvantage.  I would like TO have the Vista boot WITHOUT having to Log in and out to

  ensure that the AERO desktop is available and functional.

  (C) should I delete the files and restore Partition in Win XP? Is this the cause may be a conflict with
  Vista? Also, please let know us if you think it would be better to keep these files available if no
  conflicts are possible or probable.

  (D) what is the path, the file name or folder (path if necessary) which governs the entire desktop
  (startup, appearance, services, etc.). so I can enter my security software to exclude it from
  be affected?

  Thank you in advance for any help you can offer.

  Incidentally - for all owners of Scanner Epson 1200U running Vista Service Pack 2:

  YES! Successfully, you CAN install and run this scanner on Vista with the EPSON Twain 5.53 driver without twisting your registry, etc.

  Steps to follow:

  (1) download the file of v5.53 (10245.exe) driver TWAIN Epson

  2) extract to the folder (default location or a location of choice) and open the folder

  (3) right click on the "Setup.exe" file, go to properties and set the compatibility to Win XP SP-2

  (4) run the configuration file and wait for Windows Vista to give up the search on the web, ignore the 'warning' when he

  comes to the top and connect the scanner to complete installation as you did under Win XP (or earlier versions)

  NOTE: You will have to wait a long TIME for the next window appears once complete Vista

  research on the web. It seems that the reason why a lot of Vista with the Epson 1200U Scanner users are

  running out of patience, that it was my problem-so, the Eureka moment happened!

  My camera works great! The only loss is you open TWAIN in the application, is not
  automatically start more. This may be fixable, but I'm glad it works and I don't know enough to make the necessary changes in the registry, etc.

  Thanks again for your help!

  try to use MS-FIXIT

  http://support.Microsoft.com/mats/slow_windows_performance/

  If that didn't help, then maybe you would not survive the installation completely, and you will have to reinstall vista with updates it's still once, don't worry, it happens to all peoples.

• How can I get windows vista? I get a message that PC is not supported by the recovery disks. Windows vista Home premium HP pavilion dv9310us

  How can I get windows vista? I get a message that PC is not supported by the recovery disks.  Windows vista Home premium HP pavilion dv9310us

  Hello

  This recovery software is part of the process of HP.

  Contact HP support

  http://WWW8.HP.com/us/en/support-drivers.html

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• In Vista, I am uable to assign Office Word as default program for .doc files. Microsoft Word is not an option. Any ideas?

  In Vista, I am uable to assign Office Word as default program for .doc files.  Microsoft Word is not an option.  Any ideas?

  Beginning

  Default programs

  Associate a file type or Protocol with a program

  Highlite .doc and select "change agenda."

  The program recommended in does not (Adobe Reader in this case)

  Other programs shown don't include microsoft word

  Have Vista SP2

  Have Microsoft Office Standard 2007

  Hello

  1. are you not able to set Microsoft word as your default program?
  2. don't you make changes to the computer before the show?

  Try the following steps to configure word as the default application.

  (a) with the right button on a .doc file and select open with. If a menu appears, select Choose default program.

  (b) If Word 2010 does not here, click on the Browse button. Navigate to the C:\Program Files\Microsoft Office\Office12 directory.

  (c) search for and select the winword.exe file.

  (d) in both cases, check the always use the selected program to open this type of file.

  (e) click OK.

  Use the links below to set default programs in Windows.

  http://Windows.Microsoft.com/en-us/Windows7/change-the-program-that-opens-a-type-of-file

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

• Error Code 8024002D when you try to install Office XP service pack 3 with vista. Office XP is not installed on this computer.

  The office xp SP3 update fails and gives error code 8024002D. When I went online to try to solve this problem he asks me to insert a disk. Office XP is not installed on the computer. How can I solve this problem?

  HI Tiny01

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted relates to Office XP and would be better suited to the XP community. Please visit the link below to find a community that will provide the support you want.
  http://www.Microsoft.com/windowsxp/expertzone/newsgroups.mspx

  Engineer Support Justin M. Microsoft Answers visit our Microsoft answers feedback Forumand let us know what you think.

• Computer laptop 32 bit Vista will not shareprint with XP Office officejet v40 printer. Help, please

  I have read forums and tried everything for 4 days without luck.

  I'm trying to print from my 32-bit vista laptop to my printer of office xp... an old officejet v40 printer.

  The office prints well on this printer from xp desktop attached and I named shared printer.  All security and firewall disabled. I started at least 20 times and have tried to install unsuccessfully

  It seems that the HP driver Web page has a driver for vista, BUT the instructions are only if you hang the printer directly with the USB... No shared networking. I always thought that you could just download the dirver to the computer and it turns when you go to install it. I made for the devil to the hook to the top of my computer vista laptop directly to the printer and it installs and works fine... BUT I want it in a network or shared... no USB.

  Also, if I go to "Add a network printer" and select the printer in office shared in the list, it will be in my control panel as a printer on my laptop, but when I hit print, I get the pop box, which allows you to set the preferences, print etc, and when I hit print again, the small pop-up box flashes on for a second that it's printing paper... but no printing. Instead of this, when go to see what happened to the list of document status, I see the State of the document listed as error - printing"

  I don't know if I have vista for this printer driver in my laptop or what? I'm totally confused by the present. I read somewhere that there is no way for a computer vista laptop to print over the network to this HP printer while the printer is connected directly to a computer running XP? Is this true?

  I rarely if ever gave to be beaten by computer problems... but this one had me done bankruptcy for the third time and about to give up. Any help would be appreciated.

  THIS TIME IT WORKED! After several months of not being able to print from my computer vista laptop for my v40 OfficeJet (which is connected to my desktop XP) I decided that I would give it one more try. I used once more Bob of the 2nd ad above, as well as suggesion Eddy's instructions to select "New Port" when you arrive at the end close to Bob's instructions. THIS TIME IT WORKED! I think I'm out track somewhere when I tried to do this several months ago. In any case, I thought that I have would expand a bit on what Bob wrote just in case there's someone that who needs a little more in detail. (For a beginner, even the smallest thing can be stumbling blocks if you have never done this kind of thing before)

  On your computer vista laptop, go to printers and Control Panel. When you click the Printers icon you can click on add printer and select Add local printer (it even if it is not a local printer, but a printer that is connected to your desktop computer in another room) Ok... Then select "Use the existing Port" LP1. Then you select your printer from the list and click on it to install the driver. I think that you then click FINISH. (No you are not really over, so don't bother is not clicking on this Test Page again). Once you click FINISH, you will automatically be on the screen that shows the printers you have installed on your laptop. for help. You will then see the the OfficeJet v40 as the printer that you just installed. Highlight and right click. Then select "Run as Administrator". That will open a submenu where you and then click Properties. Then click on Ports, Add Port. Select "Local Port" and click "New Port" (as Eddy proposed). A small screen will appear where you enter now the \\NameOfPrinterYouArePrintingTo\ShareNameOfThatPrinter once you do this and click on apply and OK, you will be brought to a final screen where you will notice that the box LP1 is more verified. Place a check mark was automatically placed in the new port that you just created above IE name\sharename.  YOUR DONE!

• How to install XP on HP Pavilion DV2710US... Please help me

  Hi all!

  I tried to install Windows XP on my laptop HP Pavilion DV2710US but no success.

  Please help me, how to install XP on HP Pavilion DV2710US.

  Thank you all

  HP Pavilion DV2710US

  -

  CPU AMD Turion 64 X 2 Dual-Core Mobile Technology TL - 60 2x2.0ghz
  (2 x 512 KB of cache L2, 1600 Mhz FSB)

  -

  RAM 2048 MB - up to 4096 MB

  -

  HARD drive 160 GB SATA 5400 RPM

  -

  LCD display 14.1 "WXGA high definition BrightView Widescreen Display (1280 x 800)

  -

  VGA nVIDIA GeForce 7150 M - up to 799 MB

  -

  Optics: Support of X drive with Double layer LightScribe Super Multi 8

  -
  -

  3 x USB 2.0, VGA, TV, RJ-11, RJ-45, IEEE 1394 firewire (4-pin) out
  Camera + microphone Built in

  -

  "Dimensions: 13,15" (L) x 9.33 "(W) x 1.02" (min H) 1.54 "(maximum H)"

  -

  Weight: 2.0 Kg

  -

  PIN: 6cel Li-ion

  -

  56K modem, NETWORK card

  -

  Intel 802.11abg wireless

  -

  OS Windows Vista Edition Home Premium

  Message edited by hoannh on 06/09/2009 09:16

  Dear Alex!

  It comes from overheating while using Vista. But no self closed.

  How to try to use the cooling package when installing XP.

  Currently I use XP SP2 CD to install. What version of MS for DV2710U? (SP1, SP2, SP3)

  Thank you for your support

• How to install windows 7 on vista 64-bit with USB key or usb hard drive

  I use windows vista 64 bit on HP Pavilion dv9925nr. HL-DT-ST DVDRAM GSA-T40L ATA Devicedisappeared 'my computer' and 'Device Manager' list a few days ago. There is no upper and lower filter. Device is that in the "boot order" Start menu device sometimes comes for everything and disappears again. ROM has the power. Opening of the shutter. Device works beacause I copied a cd when it was clear. I think that this problem is related to the software. When the device appeared I also uninstalled from Device Manager and looked for a device change so she is back, but after some time again say aapeared. I want to try once by complete control of formatting and install the new copy of windows 7 and let see if the appliance becomes stable. I can't install with cd rom then how to install using a drive hard usb (WD 200 GB).
  Please suggest.

  Remember that HP does not list Windows 7 device drivers, that's why your computer is not compatible Windows 7.  HP Driver support: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3740568&lc=en&cc=us&dlc=en&lang=en&cc=us

  ==================================================================

  Windows 7 USB/DVD download tool:
  http://store.Microsoft.com/help/ISO-tool

  Create a bootable USB:
  http://www.victorchen.info/create-a-bootable-USB-memory-stick/

  Install Windows 7 from USB drive/key:
  1) http://www.maximumpc.com/article/howtos/how_to_install_windows_7_beta_a_usb_key:
  ( http://www.windowsvalley.com/blog/install-windows-vista-and-windows-7-using-bootable-usb-storage-device/ 2)
  ( http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/ 3)
  4) http://technet.microsoft.com/en-us/magazine/dd535816.aspx

  How to create and make Bootable in Windows 7 ISO from EXE Plus Setup1.Box and setup2. Box:
  http://www.mydigitallife.info/2009/10/23/how-to-create-and-make-bootable-Windows-7-ISO-from-exe-plus-Setup1-box-and-setup2-box-files/

  Also: A quick way to get your Windows 7 into a bootable DVD:
  (This guide is for people using the upgraded version of the students, composed of)
  Setup1.box, Setup2.box and Win7-P-Retail-en-us-x64)
  http://www.TomsHardware.com/Forum/1392-63-Windows-upgrade-bootable-guide-having-issues

  How to install Windows 7 from a USB stick without DVD ISO of Windows 7:
  http://www.Blogsdna.com/2016/how-to-install-Windows-7-from-USB-drive-without-Windows-7-ISO-DVD.htm

  How to install Windows 7 from a Flash drive with XP or Vista:
  http://www.legitreviews.com/article/1031/2/

  Use a USB key to install Windows 7 - even on a Netbook:
  http://TechNet.Microsoft.com/en-us/magazine/dd535816.aspx

  Cannot install Windows 7 error USB "Setup could not create a new partition system:
  http://social.answers.Microsoft.com/forums/en/w7install/thread/4b3c0430-9E41-47F6-b1cd-aed55fea7dad

  J W Stuart: http://www.pagestart.com

• How to install the Windows Vista equation editor? The program is already installed?

  How to install the Windows Vista equation editor?  The program is already installed?

  http://en.Wikipedia.org/wiki/Microsoft_Equation_Editor

  'Equation editor was developed by Design Science and is included in all versions of Microsoft Office'

  Read the above info.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Office:

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

   

  Theywill help you with your office questions when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• How to install Office for Mac 2008 on El Capitan 10.11.3?

  I'd love to help on how to install my Office for Mac 2008 software on my new MacBook Pro. When I run the installation I get the error message "Setup could not install the software because there's no software to install" who says a guy from Microsoft's Support could be because I was running the disc via remote disc from my old MacBook. He added that Yosemite is the latest OS to support the 2008 Microsoft software. Does anyone know if there is a way around this?

  You may be able to create an iso from the installation disc, and then move the iso to your MacBook Pro and run it from there. RoaringApps.com said it should work in El Capitan without problem but I still do not believe their results.

• Re: How to install Windows Xp on pre-Vista laptop Satellite A300?

  Hello

  I am now faced with a problem when I try to install windows xp on my pre-operating system Windows Vista laptop...
  A300 when I entered windows xp disk and boot from the cd/dvd... There is an error telling me that: you have viruses on your hard drive or scanner virus, or something like that, but I test the same OS disc in another pc and his work I also Gdata IS 2012, and I think that his restriction from toshiba or I don't know , but it is very important to install windows xp...

  I hope help you how to install windows xp on my laptop.

  Concerning
  John

  Hello John

  It is not easy to understand the whole situation, especially the part with the virus.
  In my opinion, Windows XP Home edition installation should not be problematic.

  What you need is Windows XP Home SP2 or SP3 and driver SATA edition disc. Without SATA driver disk HARD will be not visible to Windows XP Home edition.

  More info on what you can read on http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=38

• HP Pavilion: Bluetooth doesn´t work after installing Windows 10

  Hello

  Doesn´t Bluetooth work after I upgraded my OS to Windows 10.

  Can someone help me please?

  JimWieder

  JimWieder

  Thanks for the reply and the information updated. Check the link to your model and you will keep. Thre is no specific driver for Windows 10 for this computer for now, but there is a Bluetooth for Windows 8.1 driver.

  I could start with the HP Support Assistant, as I mentioned and see if she can find something for you. It is useful to have, as it will seek new pilots as part of its function.  If this does not work for you, then you can try to install the driver Windows 8.1 of the support page.  Broadcom Bluetooth driver

  Try to install such what, first and then Bluetooth test. If after the test, you still have trouble with the Bluetooth does not, try the method of this other link I posted on how to install a driver using compatibility mode, and then see if it will work for you.

  Here are other pages that can be useful for you in troubleshooting and testing, and also that of Microsoft.

  HP computers - using devices (Windows, 10, 8)

  HP computers - understanding and troubleshooting Bluetooth wireless technology (8.1 Windows, 8, 7, Vista, XP)

  Connect to Bluetooth devices - windows.microsoft.com

  I hope this helps.

• Re: How to install any boot on the Satellite A300 Vista Manager

  I want to install second OS on my A300 but can't do any boot manager works with Vista.

  IBM os/2 bootmanager can start Vista, but Vista say he can't run winload and hang up, Acronis bootmanager does not see any OS to Vista's NTFS disk...

  Hello

  Vista supports a clean Vista Boot Manager and there you can add all the installed OS.
  I did after I installed my Win XP as second operating system.

  First, I installed Win XP on the second partition but I couldn't start on Vista because Win XP damaged MBR (master boot record). That's why I started again from disk (NOT the Toshiba Recovery disk) Vista and the Vista disc to repair the MBR.
  Then, I started in Vista and edited the BCD. You can use the freetool like EasyBCD because that would be the best way to add a second operating system for the Vista Boot Manager.

  See you soon