Duplicate active Linux64 on Windows32

Similar Questions

• DataGuard Setup: RMAN Duplicate active problem

  Experts,
  
  I am trying to set up a standby database single-server to a primary database RAC, using configurations of data Gaurad. In this process, I finished all the configurations, and I was about to run the RMAN script to duplicate primary DB on Standby DB.
  
  When I turn off the RMAN script, he throws under the errors:
  
  ince the backup to December 5, 11
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID = instance 901 = iam1 = DISK device type
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Db in dual at 05/12/2011 15:31:42
  RMAN-05501: abandonment of duplicate target database
  RMAN-03015: an error has occurred in the script stored memory Script
  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 05/12/2011 15:31:42
  ORA-17629: unable to connect to the remote database server
  ORA-17627: ORA-01031: insufficient privileges
  ORA-17629: unable to connect to the remote database server
  
  
  Additional information:
  -----------------------------
  
  -Password is correctly copied the main database and the RAC rescue.
  -Capable to connect to DB primary waiting for database via sqlplus tool.
  -Telnet is conversely works very well.
  -All the pings work correctly.
  
  Please let me know if you have any suggestions. Happy to provide further information if necessary.
  
  Thank you

  Make sure that you should not use the password file that is located under /dbs. There is a folder called "database", where a password file must have been already generated at installation time. Simply copy the file to the same location on the standby node. I hope it should work now.

  Thank you
  GK

• RMAN-03009: ORA-17628: all duplicate Active

  OS - Linux 64
  Oracle 11.2.0.2.0
  
  Database duplication "ssdev' to 'dupli' on the same server...
  
  connected to target database: SSDEV (DBID = 2209227163)
  connected to the auxiliary database: DUPLI (unassembled)
  
  RMAN > database duplicated dupli nofilenamecheck of the active database.
  
  From 1st March 11 Db double
  using the control file of the target instead of recovery catalog database
  allocated channel: ORA_AUX_DISK_1
  channel ORA_AUX_DISK_1: SID = 134 type device = DISK
  
  content of Script memory:
  {
  clone of SQL "create spfile from memory";
  .....
  ...
  ...
  
  then I get these...
  
  From 1st March 11 backup
  using channel ORA_DISK_1
  channel ORA_DISK_1: from data file copy
  Enter a number of file datafile = 00005 name=/u01/app/oracle/oradata/ssdev/apex01.dbf
  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 01/03/2011 15:58:47
  ORA-17628: error Oracle 19505 returned by remote Oracle Server
  continue other job steps, not a not working will not re-run
  channel ORA_DISK_1: from data file copy
  Enter a number of file datafile = name=/u01/app/oracle/oradata/ssdev/users01.dbf 00004
  
  
  Ssdev trace file
  
  ------
  
  minact-SNA-status of master: Greek-gmin scn:0 x 0000.00000000 - scn:0 x 0000.00000000 gcalc - scn:0 x 0000.00000000
  
  2011-03-01 15:01:46.068
  minact-SNA-status of master: Greek-gmin scn:0 x 0003 .83c1a2c2 - 0003 .83c1a2c2 gcalc - 0003 .83c1a2c2 x scn:0 x scn:0
  
  2011-03-01 15:06:47.200
  minact-SNA-status of master: Greek-gmin scn:0 x 0003 .83c1a3e3 - 0003 .83c1a3e3 gcalc - 0003 .83c1a3e3 x scn:0 x scn:0
  minact-SNA-status of master: Greek-gmin scn:0 x 0003 .83c1a4e7 - 0003 .83c1a4e7 gcalc - 0003 .83c1a4e7 x scn:0 x scn:0
  
  -------
  
  Nothing in the alert log...

  db_file_name_convert = (' / u01/app/oracle/oradata/ssdev '.' / u01/app/oracle/oradata/dupli ')

  Is it a '. '. (DOT) or a ',' (COMMA) between the two railways?

  Hemant K Collette

• Restarting a database duplicate after network of deposit?

  I am creating a data hold sleep to help Active of Duplication of data.

  I run on a primary:

  RMAN> connect target sys/password@DB1;
  RMAN> connect auxiliary sys/password@DB2;
  RMAN> duplicate target database for standby from active database
  2> dorecover
  3> spfile
  4> set "db_unique_name"="ProdDB"
  5> set "fal_client"="DB2"
  6> set "fal_server"="DB1"
  7> set "standby_file_management"="AUTO"
  8> set "log_archive_config"="DG_CONFIG=(DB1,DB3)"
  9> set "log_archive_dest_2"="service=DB1 LGWR ASYNC valid_for=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=DB1"
  10> nofilenamecheck;
  
  

  This whole process very well, however, the auxiliary database is very remote, the network connection is poor and the database to reproduce is massive. So, it takes about 15-20 days to transfer all of the base. However, the network drops about once every 48 hours or more. It only takes a few minutes, but it's enough that it causes the command DUPLICATE the error. I've done begins the new process every time.

  Is it possible to restart a DATABASE duplicate so that it picks it up, where he was arrested instead of having to restart each time? DB version is 11r2.

  Thank you

  Two copies should simply choose where it was stopped.

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmdupdb.htm#BGBEFJHH

  I just tested and double works as it should and resumes where it left off.

  However my test database is small and the question that you may have due to the size of your database and the time it takes to do the double.  It may also be the fact that at the time where you run duplicate active database, the primary database has evolved so he can't just pick up from where he was arrested and must start over.

  You might be better to make a backup on tape/disk and make this backup.  If you always use the same backup for your restore the duplicate elements must pick up where it left off.  You can then recover the database by using the archivelogs you must all archivelogs in during the last backup.

  It is not ideal that you have a large database AND a slow network, but you can try only what you try.  On a note separated, assuming you run maximum performance, you might find that the network latency problems means your series far behind your primary to standby.  I think that with your maximum availability and maximum protection configuration are not starters.

  Hope that makes sense.

• Deploy the model w/o vCenter...

  Greetings...  I have a Windows Server 2008 virtual machine that has been cloned in a model via a feature in vCenter.   I need to deploy this model in our development environment consisting of a host 5.1 ESXi and vSphere client running against her.  We have not vCenter running in our dev environment...   Question: How can I deploy this model w/o vCenter being present?   Is it as simple as a converter any running on the VMDK file, then create a new virtual machine from scratch & pointing to the "existing virtual disk"?   The only thing here, is that in the data store, I have two files VMDK: filename.vmdk and filename_1.vmdk thanks!

  Yes, that sounds good.

  This othe rfilename_1.vmdk should be a second disk on this virtual machine.  So when this template has been created, it looks like someone added a second drive to the virtual computer.  so a C:\drive which would be the filename.vmdk and player E:\Data or something that would be the filename_1.vmdk

  Also because you can not run the configuration wizard that is part of a deployment of the model you will be have sys prep the Windows VM after that it starts to get a convincing identity, otherwise, you will encounter duplicate Active Directory SIDS

  Hope this has helped.

• DG fails with ora-16532 / ora-16577

  Because my DBs are on a network disconnected, I can't copy and paste large quantities. Everything here is typical. Please be patient.

  Primary DB is EE 11.2.0.3.0 on RHEL 5.1 and running on the file (no - ASM) system.

  DB pending is EE 11.2.0.4.0 OEL 6.4 and running on ASM.

  I perform RMAN DUPLICATE ACTIVE without error. I have run the following SQL queries on the instance of relief:

  ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION;
  
  ALTER SESSION SET nls_date_format='DD-MON-YYYY HH24:MI:SS';
  
  select database_role,protection_mode from v$database;
  DATABASE_ROLE      -     PROTECTION_MODE
  PHYSICAL STANDBY   -     MAXIMUM PERFORMANCE
  
  SELECT sequence#, first_time, next_time, applied
  FROM   v$archived_log ORDER BY sequence#;
  
  
  
  

  I compare v$ archived_log against primary. Everything transferred and applied. Life is good. I am surprised, I did not met all the problems again! Maybe I really became a good DBA now! Now all I do is turn on Data Guard.

  I have set up my caller on hold. Notable entries are below.

  ...

  (SID_DESC =
  (SDU = 32767)
  (GLOBAL_DBNAME = acme2_DGMGRL)
  (ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_home1)
  (ENVS="TNS_ADMIN=/u01/app/oracle/product/11.2.0/grid/network/admin")
  (SERVER = DEDICATED)
  (SID_NAME = acme2)
  )
  (SID_DESC =
  (SDU = 32767)
  (GLOBAL_DBNAME = acme2_DGB)
  (ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_home1)
  (ENVS="TNS_ADMIN=/u01/app/oracle/product/11.2.0/grid/network/admin")
  (SERVER = DEDICATED)
  (SID_NAME = acme2)
  )
  
  DYNAMIC_REGISTRATION_LISTENER_ACME2=OFF
  
  
  
  

  Because dynamic registration is disabled, I have generated statically _DGB above entry. I understand that ENVS is not strictly necessary, however, I have included to exclude errors. I'm sure some additional settings are properly configured.

  Elementary school:

  show parameter log_archive
  log_archive_config:  'dg_config=(acme,acme2)'
  log_archive_dest_1:  LOCATION=USE_DB_RECOVERY_FILE_DEST VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=acme
  log_archive_dest_2:  SERVICE=acme2 SYNC AFFIRM reopen=15 NET_TIMEOUT=15 DB_UNIQUE_NAME=acme2 VALID_FOR=(online_logfiles,primary_role) 
  
  
  
  

  Standby:

  show parameter log_archive
  log_archive_config:  'dg_config=(acme2,acme)'
  log_archive_dest_1:  LOCATION=USE_DB_RECOVERY_FILE_DEST
  log_archive_dest_2:  SERVICE=acme AFFIRM SYNC VALID_FOR=(online_logfiles,primary_role) DB_UNIQUE_NAME=acme
  
  
  
  

  I check on the primary:

  show parameter dg_broker
  NAME      -  VALUE
  dg_broker_config_file1 - /u02/app/oracle/fra/dr1acme.dat
  dg_broker_config_file2 - /u02/app/oracle/fra/dr2acme.dat
  dg_broker_true         - TRUE
  
  

  I put and check that the sleep settings:

  show parameter dg_broker
  NAME      -  VALUE
  dg_broker_config_file1 - +DATA/acme2/broker/dr1acme.dat
  dg_broker_config_file2 - +FRA/acme2/broker/dr2acme.dat
  dg_broker_true         - TRUE
  
  
  

  I'm going to the ASMCMD from the night before and make the directories above.

  Elementary school:

  dgmgrl
  connect sys/mypassword
  Connected.
  add database acme2 as connect identifier is acme2 maintained as physical;
  
  
  
  

  He adds very well. It is part of the configuration, but disabled. In the listener from sleep log, I see that the primary is a successful connection to the service 'acme2'.

  show database verbose acme2 (I only typed relevant properties...ask for more if need be)
  DGConnectIdentifier = 'acme2'
  LogXptMode = 'SYNC'
  Standbyfilemanagement = 'AUTO'
  DbFileNameConvert = '/u02/app/oracle, +DATA, /u03/app/oracle, +DATA'
  LogFileNameConvert = '/u02/app/oracle, +FRA, /u03/app/oracle, +FRA'
  StaticConnectIdentifier = '(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(host=mystandbyhost)(port=1521))(CONNECT_DATA=(SERVICE_NAME=acme2_DGMGRL)(INSTANCE_NAME=acme)(SERVER=DEDICATED)))'
  StandbyArchiveLocation = 'USE_DB_RECOVERY_FILE_DEST'
  
  Database Status:
  DISABLED
  
  
  
  

  Just to double check, I use my DGMGRL Standby to try to connect to the primary DGMGRL with "sys/mypassword". Success! I can view primary DGMGRL configuration of the previous day. I have then copy and paste the "StaticConnectIdentifier" above in my primary tnsnames.ora file and create a temporary entry of TNS. I then try to tnsping this entry temp. All right. I have remove the temporary entry and return to DGMGRL. Everything went perfectly. Finally, I check the file of newspaper DG on the eve. The last line is "Configuration does not exist, Data Guard Broker loan", which is exactly what I expected to see at this stage. Can now do better?

  Elementary school:

  dgmgrl
  connect sys/mypassword
  Connected.
  enable database acme2;
  
  
  
  

  .. and so my long nightmare starts. Custody of intelligence data does not work.

  On logs waiting for DG, I see these errors for a while, but then they disappear:

  drcx: cannot open configuration file "+DATA/acme2/broker/dr1acme.dat"
  
  
  
  

  What makes the sense that they have not been copied yet. After a minute, I check the DATA + and + FRA starts on the eve and two config DG files have transferred and is where they should be. Ok. I check the database of pending log file. Only standard archived journal entries (files are always transferred from the primary school outside of Data Guard). I check ADRCI on intelligence. There are no problems or incidents.

  On the primary level, there is no problem or incident at the ADRCI and errors will only find is in the DG log file. They are:

  Broker Initiated ENABLE of site acme2 has been scheduled
  Data Guard Broker Status Summary:
  Type                 --       Name           --            Severity  --   Status
  Configuration                 DG_ACME_CONFIG       warning       ora-16607
  Primary DB                   acme                           success       ora-00000
  Physical Standby DB        acme2                         error         ora-16532
  
  ENABLE DATABASE acme2
  Metadata Resync failed. Status = ora-16577
  
  Command ENABLE DATABASE acme2 completed
  
  
  
  

  The error is repeated continually as main tent contact the broker ensures DG. I have check the earphone standby log file. I see that primary is connected to the local 'acme2_DGB' about once every minute, right mark. It is to achieve the TNS service, but the TNS service does not meets with the local broker.

  On the Pb of the day before, I run

  SQL> select process,client_process,status from v$managed_standby;
  
  
  
  

  PROCESS of	CLIENT_PROCESS	STATUS
  ARCH	ARCH	CLOSING
  ARCH	ARCH	CLOSING
  ARCH	ARCH	CONNECTED
  ARCH	ARCH	CLOSING
  RFS	ARCH	IDLE
  RFS	UNKNOWN	IDLE
  RFS	LGWR	IDLE

  SELECT THE MESSAGE FROM V$ DATAGUARD_STATUS; shows nothing useful (transfers archive standard only).

  
  I've completely removed the DG configuration on all the boxes, removed the DG config files and completely recreated the configuration several times. In fact, I completely rebuilt the standby database DG twice. In addition, accelerated failover is disabled on the configuration of the DG.

  I tried everything I can think and find online. I would be very happy any idea on this issue that the community has to offer.

  Hello

  I do not use DG with broker but I want to ask something. I couldn't see the values of the parameters compatible on both sides. You know that the values must be the same on all the databases in a dataguard configuration.

  Primary DB is EE 11.2.0.3.0 on RHEL 5.1 and running on the file (no - ASM) system.

  DB pending is EE 11.2.0.4.0 OEL 6.4 and running on ASM.

  Best regards

• Retrieve the table

  Hello
  
  I want to know if there is a method to retrieve an array of backup rman without a copy of the database.
  
  Thanks for your help.

  Can only restore the tablespace or need double job with database?

  Yes, you can restore specific tablepspce by jumping the other tablespace by skip on clone cmd rman tablespace clause.

  http://docs.Oracle.com/CD/B19306_01/backup.102/b14194/rcmsynta028.htm
  http://dbarajabaskar.blogspot.in/2010/05/RMAN-duplicate-active-database-cloning.html
  As

  RUN
  {
    ALLOCATE AUXILIARY CHANNEL newdb1 DEVICE TYPE sbt;
    DUPLICATE TARGET DATABASE TO newdb
      DB_FILE_NAME_CONVERT=('/h1/oracle/dbs/trgt/','/h2/oracle/oradata/newdb/')
      UNTIL TIME 'SYSDATE-1'  # specifies incomplete recovery
      *SKIP TABLESPACE cmwlite, drsys, example   # skip desired tablespaces*
      PFILE = ?/dbs/initNEWDB.ora
      lOGFILE
        GROUP 1 ('?/oradata/newdb/redo01_1.f',
                 '?/oradata/newdb/redo01_2.f') SIZE 200K,
        GROUP 2 ('?/oradata/newdb/redo02_1.f',
                 '?/oradata/newdb/redo02_2.f') SIZE 200K
        GROUP 3 ('?/oradata/newdb/redo03_1.f',
                 '?/oradata/newdb/redo03_2.f') SIZE 200K REUSE;
  }
  

• Changing the trigger error

  Hi all
  
  I am trying to use the trigger, but I get the mutation of error:
  
  This is my original table:
  

  BUS_CYC_D                 CYC_STRT_OF_DAY_DT        BUS_CYC_STAT_C CYC_END_OF_DAY_DT         CCUR_N                 CRE_T                     CRE_USR_ID UPD_T                     UPD_USR_ID 
  ------------------------- ------------------------- -------------- ------------------------- ---------------------- ------------------------- ---------- ------------------------- ---------- 
  08-DEC-08                 08-DEC-08                 ACTV         09-DEC-08                 1                      08-DEC-08 12.00.00.000000000 AM TAAC       08-DEC-08 12.00.00.000000000 AM seeding 

  I wrote a trigger to avoid insertion of a date 'ACTIVE' user. My trigger is defined as:
  

  CREATE OR REPLACE TRIGGER trg_bus_cyc_valid_br
  BEFORE INSERT
  ON t_bus_cyc
  FOR EACH ROW
  
  DECLARE
   
  
  pctx                          plog.log_ctx := plog.init('Trigger.trg_bus_cyc_valid_br');
  v_unit_context                VARCHAR2(1500);
  v_count                       NUMBER(10,0) := 0;
  raiseexcp                           EXCEPTION;
  
  BEGIN
  
      
  --    v_unit_context := 'Fetch if t_bus_cyc table already have active record'; 
        
       SELECT COUNT(1) 
       INTO v_count
      FROM t_bus_cyc tbc
      WHERE tbc.bus_cyc_stat_c ='ACTV';
       
  --     v_unit_context := 'Fetch if t_bus_cyc table already have active record'; 
       
       IF :NEW.bus_cyc_stat_c = 'ACTV' AND v_count = 1
       THEN
            RAISE raiseexcp;
      END IF;
       
    --  plog.setendsection(pctx,'SECTION_1');
  
  EXCEPTION
       WHEN raiseexcp
       THEN
            RAISE_APPLICATION_ERROR (-20000,'DUPLICATE ACTIVE DATES');    
  
  END  trg_bus_cyc_valid_br;

  But when I try to use something like, I get the error transfer:
  
  

       INSERT INTO t_bus_cyc
            (bus_cyc_d,
             bus_cyc_stat_c,
             cyc_strt_of_day_dt,
             cyc_end_of_day_dt,
             cre_usr_id,
             upd_usr_id)
       SELECT max(bus_cyc_d) +1  ,
              'INACTVE',
              max(bus_cyc_d) -1,
              max(bus_cyc_d) -1,
              'A',
              'A'
       FROM t_bus_cyc where bus_cyc_d = '08-DEC-08'  

  Please something to avoid the mistake of the mutation.

  Hello

  I think I misread your original message, and I changed it when you answered. My apologies.

  It looks like all this you want to do is raise an error if someone tries to add a second line "ACTV.
  You better not to use a trigger while: more it can be done with a unique index, LIKE THIS:

  CREATE UNIQUE INDEX     t_bus_cyc_actv
  ON t_bus_cyc ( CASE
                 WHEN  bus_cyc_stat_c ='ACTV'
                 THEN  1
              END
            );
  

  In general, when you have the choice of doing something with a trigger or some other way (such as a constraint or an index), then the other way is almost always better. Etbin statement "triggers are evil" is perhaps a little exaggerated, but it is something short and catchy to remember.

  The error you are getting now is that a FOR EACH ROW trigger on t_bus_cyc cannot reference t_bus_cyc himself.
  The link I posted shows different ways to get around that. As Peter says, none of them are really the best solution for your problem.

• Search duplicate files which are not linked to Active Folders

  I have several duplicates in my iTunes. Most of the duplicates is more related to active records. I can find how to find duplicates and I can find how to remove them, but there is no sort option that detects files that are not in my current records.

  I don't know what you mean by "linked to active records. Do you mean that you have files in folders that are not related to iTunes, or your library entries that are not related to the files?

  iTunes can create duplicates if the same content is added several times from outside the media folder when it is about to make copies of everything that is added to the library, or is added from an external drive that hosts the press kit that was disconnected during the launch of iTunes.

  Official notice of Apple on the duplicates is here: find and remove duplicates in your iTunes library. This is a manual process and article fails to explain some of the potential pitfalls such as the lost coast and membership of playlist, or sometimes the same file can be represented by multiple entries in the library as well as a removal and recycling the file will break all the others.

  Use MAJ > display > show items to reproduce exactly to display the duplicates because it is normally a selection more useful. You must manually select all but one of each group to remove. Sort the list by Date added can make easier select appropriate tracks, but it works better when executed immediately after the dupes were created.  If you have several entries in iTunes connected to a same file on the disk hard then don't not send to trash.

  Use my DeDuper script (Windows only) If you are not sure, do not want to do it by hand, or want to maintain ratings, play counts and playlist membership. See this background thread , this post for detailed instructions and Please take note of the warning to back up your library before deduping.

  (If you don't see the menu bar press ALT to temporarily view or CTRL + B to keep displayed.)

  The latest version of the script can put away the dead links as long as there is at least a double live to merge his stats and membership of the playlist and must deal wisely when the same file has been added through multiple paths.

  In its current form the script processes only the files that are added to the library. If you have orphaned files in the media folder these could be added to the library before you start deduping.

  TT2

• RMAN duplicate for standby the active database and the missing data files

  We have a car of 2 node ASM 11 GR 2 and 11.1 of database and a standby with ASM also. Our database is relatively low (300 GB)

  and in one recent event the day before was such a departure from the primary that we decided to "repopulate" the data using duplicate RMAN.

  I deleted the data files of the previous day and followed the Oracle documentation to duplicate a database. In the waiting

  I created a static listener and a pfile containing only the essential information (db_unique_name). I started the day before with nomount using the 'empty' pfile.

  I run RMAN, connected to the target and ancillary catalogues and run this command:

  run {
  allocate channel prmy1 type disk;
  allocate channel prmy2 type disk;
  allocate channel prmy3 type disk;
  allocate channel prmy4 type disk;
  allocate channel prmy5 type disk;
  allocate auxiliary channel stby1 type disk;
  duplicate target database for standby from active database nofilenamecheck;
  }
  

  RMAN duplication completed without errors, so I started the rescue database and got

  an error saying that datafile XXX is missing. I checked XXX datafile at the primary level

  and it is in a DISCONNECTED state. In the standby database the same data file is in the online state.

  So I think the problem is that during the duplication, RMAN (as documentation States) does not work

  Copy the files of data in offline mode, but the standby control file seem to think that these data files

  are online and should be present.

  Can someone please help me solve this problem? From my understanding, I could just copy the missing persons

  data files (there are many however) and in the standby go offline, but I don't think it's

  the right solution, edit this file for control of the standby? I would add another option

  in the RMAN script?

  Take the data file in offline mode on the site of the previous day.

  I don't think that two COPIES try to manage separately offline files.

  Hemant K Collette

• ORA-01017 when duplicate RMAN database active

  Hello, ORACLE guru!

  I have some difficulties trying to reproduce DB via RMAN duplicate from active database.

  The script is simple:

   run
   {
   allocate channel ch1 device type disk;
   allocate auxiliary channel aux1 device type disk;
   duplicate target database to mydb from active database;
   }
  
  

  The problem is in this summary:

  Starting backup at 15-JAN-14
  channel ch1: starting datafile copy
  copying current control file
  Oracle instance started
  
  
  Total System Global Area   10689474560 bytes
  
  
  Fixed Size                     2237776 bytes
  Variable Size               4227861168 bytes
  Database Buffers            6442450944 bytes
  Redo Buffers                  16924672 bytes
  
  
  contents of Memory Script:
  {
     sql clone "alter system set  db_name =
  ''mydb'' comment=
  ''Reset to original value by RMAN'' scope=spfile";
     sql clone "alter system reset  db_unique_name scope=spfile";
     shutdown clone immediate;
  }
  executing Memory Script
  
  
  sql statement: alter system set  db_name =  ''mydb'' comment= ''Reset to original value by RMAN'' scope=spfile
  
  
  sql statement: alter system reset  db_unique_name scope=spfile
  
  
  Oracle instance shut down
  released channel: ch1
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Duplicate Db command at 01/15/2014 12:16:07
  RMAN-05501: aborting duplication of target database
  RMAN-03015: error occurred in stored script Memory Script
  RMAN-03009: failure of backup command on ch1 channel at 01/15/2014 12:15:57
  ORA-17629: Cannot connect to the remote database server
  ORA-17627: ORA-01017: invalid username/password; logon denied
  ORA-17629: Cannot connect to the remote database server
  
  
  RMAN>
  RMAN>
  

  check and see the differences:

  The database with RMAN duplicate

• How can I active names change for images exchanged in duplicate symbols?

  I have what seems to be a bug in cc2014 driven on-Board under the following circumstances:

  1 duplicate a symbol

  2. drag the symbol duplicated on stage.4

  3 Rename the symbol

  4. Click to edit the symbol

  5. Select an image inside the symbol

  6. in the properties panel, change to reverse the image to use for this instance of the duplicate symbol (I need to reuse this symbol several times and not being is not able to change active names is a real problem!).

  7 names for the asset in the chronology and elements was automatically generated at the time of the duplication when trying to change the names they go back to the auto-generated name.

  How can I overcome this problem, which is clearly a bug or an evil thought thanks to some highly competent programming by another adobe edge animate tesm

  I thank in advance

  David.

  You can assign IDS and classes of symbols with attr ('id', 'newIDName') and addClass().

  So let's say I have a symbol that contains other symbols - I had to first give an id to the outermost symbol, then drill down to other internal symbols. So since I can remedy directly, then I can do what I want with them.

  When I want to create several symbols, then I run a loop so that they have the same name with an index.  Here, I'm not add an id to the internals, but you could use the same principle. You can also assign names of classes.

  example:

  create buttons in a div. navigation bar

  for (m = 0; m<>

  var buttons = sym.createChildSymbol ("button", "navBar");

  Buttons.Element.attr ("ID", "Button" + m);

  SYM. $("#button" + m) .css ({'position': 'absolute', 'top': 5, 'left': (distance += 50)});   Make sure you have the # in front of the name of the new

  sym.getSymbol("#button"+m).$('bg').css ({'background-color':'white'});})

  sym.getSymbol("#button"+m).$('number').html (m + 1);

  };

• Create database pending active using the RMAN Duplicate command

  Hello guys,.
  
  I created the database before using the RMAN Duplicate command, but here I am stuck.
  
  Please help me to overcome this >
  
  RMAN > run {}
  2 > allocate channel prmy1 type disk;
  3 > allocate channel prmy2 type disk;
  4 > allocate channel prmy3 type disk;
  5 > allocate channel prmy4 type disk;
  6 > allocate auxiliary channel stby type disk;
  7 > duplicate target database for the eve of the active database
  8 > spfile
  9 > parameter_value_convert "orcl", "orclstd".
  10 > set db_unique_name = "orclstd".
  11 > set db_file_name_convert = "/ orcl / ', ' / orclstd / '.
  12 > set log_file_name_convert = "/ orcl / ', ' / orclstd / '.
  "13 > set control_files="D:\app\employee3\oradata\ORCLSTD\control01.ctl ', 'D:\app\employee3\flash_recovery_area\ORCLSTD\control02.ctl '.
  14 > set log_archive_max_processes = '5'
  15 > set fal_client = "orclstd."
  16 > set fal_server = "orcl".
  17 > set diagnostic_dest =: \app\employee3'
  18 > set db_recovery_file_dest = a: \app\employee3\flash_recovery_area'
  19 > set standby_file_management = 'AUTO '.
  "20 > set log_archive_config ='dg_config = (orcl, orclstd)"
  21 > set log_archive_dest_2 = 'service = orcl ASYNC valid_for = (ONLINE_LOGFILE, PRIMARY_ROLE) db_unique_name = orclstd';
  {22 >}
  
  allocated channel: prmy1
  channel prmy1: SID = 70 type device = DISK
  
  allocated channel: prmy2
  channel prmy2: SID = 135 type device = DISK
  
  allocated channel: prmy3
  channel prmy3: SID = 191 type device = DISK
  
  allocated channel: prmy4
  channel prmy4: SID = 7 type of device = DISK
  
  allocated canal: stby
  channel stby: SID = 129 type device = DISK
  
  From 7 November 12 Db double
  
  content of Script memory:
  {
  backup that copy reuse
  TargetFile "E:\app\RAJKUMAR\product\11.2.0\dbhome_1\DATABASE\PWDorcl.ORA" auxiliary format
  "D:\app\employee3\product\11gr2\DATABASE\PWDorclstd.ORA" targetfile
  ' E:\APP\RAJKUMAR\PRODUCT\11.2.0\DBHOME_1\DATABASE\SPFILEORCL. ORA' auxiliary format
  ' D:\APP\EMPLOYEE3\PRODUCT\11GR2\DATABASE\SPFILEORCLSTD. ORA';
  clone of SQL ' alter system set spfile = "D:\APP\EMPLOYEE3\PRODUCT\11GR2\DATABASE\SPFILEORCLSTD." ORA "«;»
  }
  execution of Script memory
  
  From backup 7 November 12
  Backup finished in 7 November 12
  
  SQL statement: alter system set spfile = "D:\APP\EMPLOYEE3\PRODUCT\11GR2\DATABASE\SPFILEORCLSTD. ORA "
  
  content of Script memory:
  {
  clone of SQL 'alter system set audit_file_dest =
  "E:\app\RAJKUMAR\admin\orclstd\adump" comment =
  ' ' scope = spfile;
  clone of SQL 'alter system set dispatchers =
  ''(Protocol=TCP) (SERVICE = orclstdXDB) "comment =
  ' ' scope = spfile;
  clone of SQL 'alter system set db_unique_name =
  "Orclstd" comment =
  ' ' scope = spfile;
  clone of SQL 'alter system set db_file_name_convert =
  "/orcl/", "/orclstd/" comment is
  ' ' scope = spfile;
  clone of SQL 'alter system set log_file_name_convert =
  "/orcl/", "/orclstd/" comment is
  ' ' scope = spfile;
  clone of SQL 'alter system set control_files =
  "D:\app\employee3\oradata\ORCLSTD\control01.ctl", "D:\app\employee3\flash_recovery_area\ORCLSTD\control02.ctl" comment =
  ' ' scope = spfile;
  clone of SQL 'alter system set log_archive_max_processes =
  5 comment =
  ' ' scope = spfile;
  clone of SQL 'alter system set fal_client =
  "Orclstd" comment =
  ' ' scope = spfile;
  clone of SQL 'alter system set fal_server =
  "Orcl" comment =
  ' ' scope = spfile;
  clone of SQL 'alter system set diagnostic_dest =
  "D:\app\employee3" comment =
  ' ' scope = spfile;
  clone of SQL 'alter system set db_recovery_file_dest =
  "D:\app\employee3\flash_recovery_area" comment =
  ' ' scope = spfile;
  clone of SQL 'alter system set standby_file_management =
  Comment by "AUTO" =
  ' ' scope = spfile;
  clone of SQL 'alter system set log_archive_config =
  Comment by "dg_config" (orcl, orclstd) =. =
  ' ' scope = spfile;
  clone of SQL 'alter system set log_archive_dest_2 =
  "service = orcl ASYNC = (ONLINE_LOGFILE, PRIMARY_ROLE) db_unique_name = orclstd valid_for" comment =
  ' ' scope = spfile;
  clone to stop immediately;
  startup nomount clone;
  }
  execution of Script memory
  
  SQL statement: alter system set audit_file_dest = comment "E:\app\RAJKUMAR\admin\orclstd\adump" = "' scope = spfile
  
  SQL statement: alter system set dispatchers = ''(PROTOCOL=TCP) (SERVICE = orclstdXDB) "comment ="' scope = spfile
  
  SQL statement: alter system set db_unique_name = comment "orclstd" = "' scope = spfile
  
  SQL statement: alter system set db_file_name_convert = "/orcl/", "/orclstd/" comment = "' scope = spfile
  
  SQL statement: alter system set log_file_name_convert = "/orcl/", "/orclstd/" comment = "' scope = spfile
  
  SQL statement: alter system set control_files = "D:\app\employee3\oradata\ORCLSTD\control01.ctl", "D:\app\employee3\flash_recovery_area\ORCLSTD\control
  02.CTL "comment ="' scope = spfile
  
  SQL statement: alter system set log_archive_max_processes = 5 = comment "' scope = spfile
  
  SQL statement: alter system set fal_client = comment "orclstd" = "' scope = spfile
  
  SQL statement: alter system set fal_server = comment "orcl" = "' scope = spfile
  
  SQL statement: alter system set diagnostic_dest = comment "D:\app\employee3" = "' scope = spfile
  
  SQL statement: alter system set db_recovery_file_dest = comment "D:\app\employee3\flash_recovery_area" = "' scope = spfile
  
  SQL statement: alter system set standby_file_management = comment "AUTO" = "' scope = spfile
  
  SQL statement: alter system set log_archive_config = "dg_config = (orcl, orclstd)" comment = "' scope = spfile
  
  SQL statement: alter system set log_archive_dest_2 = "service = orcl ASYNC = (ONLINE_LOGFILE, PRIMARY_ROLE) db_unique_name = orclstd valid_for" comment = "'s
  face = spfile
  
  Instance Oracle to close
  
  connected to the auxiliary database (not started)
  Oracle instance started
  
  Total System Global Area 1071333376 bytes
  
  Bytes of size 1375792 fixed
  528482768 variable size bytes
  Buffers data 536870912 bytes
  Redo buffers 4603904 bytes
  allocated canal: stby
  channel stby: SID = 63 type device = DISK
  
  content of Script memory:
  {
  backup current controlfile to standby auxiliary copy format ' D:\APP\EMPLOYEE3\ORADATA\ORCLSTD\CONTROL01. CTL';
  Restore clone controlfile to ' D:\APP\EMPLOYEE3\FLASH_RECOVERY_AREA\ORCLSTD\CONTROL02. CTL' of
  ' D:\APP\EMPLOYEE3\ORADATA\ORCLSTD\CONTROL01. CTL';
  }
  execution of Script memory
  
  From backup 7 November 12
  channel prmy1: from data file copy
  copy of the control file ensures
  name=E:\APP\RAJKUMAR\PRODUCT\11.2.0\DBHOME_1\DATABASE\SNCFORCL output file. ORA tag = RECID = 1 STAMP = 798743550 TAG20121107T171229
  channel prmy1: datafile copy complete, duration: 00:00:03
  Backup finished in 7 November 12
  
  From restoration to November 7, 12
  
  channel stby: copy of copy of control files
  Restoration finished November 7, 12
  
  content of Script memory:
  {
  SQL clone 'alter database sleep mounting database';
  }
  execution of Script memory
  
  SQL statement: alter database mount rescue
  output channel: prmy1
  output channel: prmy2
  output channel: prmy3
  output channel: prmy4
  exit canal: stby
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the command duplicate Db at 07/11/2012 17:12:40
  RMAN-05501: abandonment of duplicate target database
  RMAN-05001: E:\APP\RAJKUMAR\ORADATA\ORCL\MIGRATION_DATA01 auxiliary file name. DBF conflict with a file used by the target database
  RMAN-05001: E:\APP\RAJKUMAR\ORADATA\ORCL\DEMO_INDX01 auxiliary file name. DBF conflict with a file used by the target database
  RMAN-05001: E:\APP\RAJKUMAR\ORADATA\ORCL\DEMO_DATA01 auxiliary file name. DBF conflict with a file used by the target database
  RMAN-05001: E:\APP\RAJKUMAR\ORADATA\ORCL\USERS01 auxiliary file name. DBF conflict with a file used by the target database
  RMAN-05001: E:\APP\RAJKUMAR\ORADATA\ORCL\UNDOTBS01 auxiliary file name. DBF conflict with a file used by the target database
  RMAN-05001: E:\APP\RAJKUMAR\ORADATA\ORCL\SYSAUX01 auxiliary file name. DBF conflict with a file used by the target database
  RMAN-05001: E:\APP\RAJKUMAR\ORADATA\ORCL\SYSTEM01 auxiliary file name. DBF conflict with a file used by the target database
  
  RMAN >
  
  Thank you
  Reverchon

  user9192565 wrote:

  11> set db_file_name_convert='/orcl/','/orclstd/'
  12> set log_file_name_convert='/orcl/','/orclstd/'
  

  RMAN-05001: auxiliary file name E:\APP\RAJKUMAR\ORADATA\ORCL\MIGRATION_DATA01.DBF conflicts with a file used by the target database
  RMAN-05001: auxiliary file name E:\APP\RAJKUMAR\ORADATA\ORCL\DEMO_INDX01.DBF conflicts with a file used by the target database
  RMAN-05001: auxiliary file name E:\APP\RAJKUMAR\ORADATA\ORCL\DEMO_DATA01.DBF conflicts with a file used by the target database
  RMAN-05001: auxiliary file name E:\APP\RAJKUMAR\ORADATA\ORCL\USERS01.DBF conflicts with a file used by the target database
  RMAN-05001: auxiliary file name E:\APP\RAJKUMAR\ORADATA\ORCL\UNDOTBS01.DBF conflicts with a file used by the target database
  RMAN-05001: auxiliary file name E:\APP\RAJKUMAR\ORADATA\ORCL\SYSAUX01.DBF conflicts with a file used by the target database
  RMAN-05001: auxiliary file name E:\APP\RAJKUMAR\ORADATA\ORCL\SYSTEM01.DBF conflicts with a file used by the target database
  

  The strings that you entered in your file name conversion settings does not match where actually your data files. If the string does not match the names of files, there is no names of files to convert. Because you're on windows, how about something like this?

  set db_file_name_convert='\ORCL\','\ORCLSTD\'
  set log_file_name_convert='\ORCL\','\ORCLSTD\'
  

  Hope that helps...

  Patrik

• RMAN-06094: datafile 344 must be restored: in duplicate of active db db

  Hi all
  
  I'm on the oracle 11g running on Solaris Sparc 64-bit database.
  
  I am using the RMAN duplicate command using the current database with the following command:
  

  rman target sys/manager@TARGET nocatalog  auxiliary sys/manager@DEST <<EOF
  run {
  allocate channel ch1 type disk;
  allocate channel ch2 type disk;
  allocate channel ch3 type disk;
  allocate channel ch4 type disk;
  allocate channel ch5 type disk;
  allocate auxiliary channel ch6 type disk;
  allocate auxiliary channel ch8 type disk;
  allocate auxiliary channel ch7 type disk;
  allocate auxiliary channel ch9 type disk;
  allocate auxiliary channel ch10 type disk;
  SET NEWNAME FOR DATABASE TO '/p1/oracle/DEST/DEST/datafile/%U';
  duplicate database to DEST from active database nofilenamecheck;}

  I got this error at the end of the output:
  

  datafile 340 switched to datafile copy
  input datafile copy RECID=2183 STAMP=789836366 file name=/p1/oracle/dest/DEST/datafile/data_D-TARGET_TS-SYSAUX_FNO-340
  
  datafile 341 switched to datafile copy
  input datafile copy RECID=2184 STAMP=789836366 file name=/p1/oracle/dest/DEST/datafile/data_D-TARGET_TS-RMX_DATA_FNO-341
  
  datafile 342 switched to datafile copy
  input datafile copy RECID=2185 STAMP=789836366 file name=/p1/oracle/destr/DEST/datafile/data_D-TARGET_TS-RMX_IDX_FNO-342
  
  datafile 343 switched to datafile copy
  input datafile copy RECID=2186 STAMP=789836366 file name=/p1/oracle/dest/DEST/datafile/data_D-TARGET_TS-RMX_LOBS_FNO-343
  
  contents of Memory Script:
  {
     set until scn  10453270596456;
     recover
     clone database
      delete archivelog
     ;
  }
  executing Memory Script
  
  executing command: SET until clause
  
  Starting recover at 28-JUL-12
  released channel: ch1
  released channel: ch2
  released channel: ch3
  released channel: ch4
  released channel: ch5
  released channel: ch6
  released channel: ch8
  released channel: ch7
  released channel: ch9
  released channel: ch10
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Duplicate Db command at 07/28/2012 15:00:09
  RMAN-05501: aborting duplication of target database
  RMAN-03015: error occurred in stored script Memory Script
  RMAN-06094: datafile 344 must be restored
  
  RMAN>
  RMAN>
  
  Recovery Manager complete.
  ~

  Please suggest how to go about the next.
  
  Concerning
  KK
  
  Published by: Kk on July 28, 2012 02:41
  
  Published by: Kk on July 28, 2012 02:49: ADDED BETTER OUTPUT

  KK wrote:
  Hi all

  The data file 344 and 345 belonged to two different tablespaces that were not used.

  More, I don't know why, but the timestamp on these two data files 344 and 345 was showiing like JULY 6 instead of JULY 28.

  If I was sure that this was causing the problem.

  I gave these 2 storage spaces and then runs again once again the script removing created controlfiles and the database has been opened.

  Just curious as to why these 2 data files were not getting filled with the timestamp of the last?

  Concerning
  KK

  What is the status of the two data files? You can query to source database
  SQL > select file_id, dba_data_files online_status where file_id in (344 345);

  This backup contains these two files? If these two tablespaces have only a data file is in read-only mode?

• Question about the duplicate database active on 11 GR 1 matter?

  Hello
  
  I'm getting following error active creating duplicate data.
  
  
  From backup 17 April 11
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID = 129 type device = DISK
  channel ORA_DISK_1: from data file copy
  Enter a number of file datafile = 00001 name=+DATA/testdb/system.dbf
  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 17/04/2011 17:55:09
  ORA-17629: unable to connect to the remote database server
  ORA-17627: ORA-12154: TNS: could not resolve the connect identifier specified
  ORA-17629: unable to connect to the remote database server
  continue other job steps, not a not working will not re-run
  channel ORA_DISK_1: from data file copy
  Enter a number of file datafile = name=+DATA/testdb/sysaux01.dbf 00003
  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 17/04/2011 17:57:22
  ORA-17629: unable to connect to the remote database server
  ORA-17627: ORA-12154: TNS: could not resolve the connect identifier specified
  ORA-17629: unable to connect to the remote database server
  continue other job steps, not a not working will not re-run
  channel ORA_DISK_1: from data file copy
  Enter a number of file datafile = name=+DATA/testdb/undodbs1.dbf 00002
  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 17/04/2011 17:59:26
  ORA-17629: unable to connect to the remote database server
  ORA-17627: ORA-12154: TNS: could not resolve the connect identifier specified
  ORA-17629: unable to connect to the remote database server
  continue other job steps, not a not working will not re-run
  channel ORA_DISK_1: from data file copy
  Enter a number of file datafile = name=+DATA/testdb/rman01.dbf 00004
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Db in dual at 17/04/2011 18:01:30
  RMAN-03015: an error has occurred in the script stored memory Script
  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 to 17/04/2011 18:01:30
  ORA-17629: unable to connect to the remote database server
  ORA-17627: ORA-12154: TNS: could not resolve the connect identifier specified
  ORA-17629: unable to connect to the remote database server
  
  Thank you

  Check on MOS:

  Duplicate of Active database error: Ora-17627: Ora-12154: Tns: could not resolve the C [1144273.1 ID]