Duplicate the reference: how to unify?

I have references in doubles, that that is the same image on the disc has more than one reference entry in Aperture.

If I delete the reference to Aperture 2 1 and then proceed to empty the Recycle Bin to open the disk file ends up in the trash of OSX. Once you empty the trash OSX the file of the disk is lost.

At this stage the 1 reference I did not remove is an orphan IE: the reference points to nowhere (file not existing)

How is - that someone is supposed to do to remove 1 of the 2 reference without deleting the file from the disk?

Thank you

I select one of the versions in Aperture and using ' file > consolidate. " Select this option to copy the reference file when you are prompted. Then, remove the second version, a reference to this file. Now you can move the the first image is again referenced.

Tags: Professional Applications

Similar Questions

  • VI script: get the duplicate element reference

    In the scripts of VI I copy element (any type of indicator, the constant control) with the Move method with the duplicate property - true. The top right Terminal output of the method is the reference to the source, not a new object.

    Is there a simple way to get the reference to that copy (another copy method, etc.)?

    Simple solutions not (they can work on test, but not good examples)

    1) move into temporary cluster - easy to find a new element

    (2) see all before, after and compare lists. But the source VI can be of any size and complexity.

    (3) item Create manually copy: bad, the solution should work on all types of items.

    I would use the method VI create reference in this situation.

  • How to get rid of the reference lines on the front panel

    I forgot how I created a couple of horizontal and vertical lines on the front panel. It seems that the original on the front lines. When I move my program to another monitor with a different resolution, the layout is messed up because of the reference lines cannot change the resolution. Everybody respected this before? How to get rid of them?

    Attached are the 2 creen shot of facades.

    Thanks in advance.

    Ah, I figured out. I accidentally selected the "scale with objects pane" from the context menu of a button in the tab. This is whence the reference lines.

    Thanks for all your guys help and advice.

  • Given the reference to an order, how can I get size of table programmatically

    If a reference to a command is passed to a sub - vi, how to get the current length of the array in the sub - vi?  I tried two properties: "NumRows", such as documented, with the visible number of rows in the table control.  'IndexVals' contains the index of the array element in the upper left corner of the table control.  There seems to be no method to obtain the length of the current array.  I tried to change the class of the reference to a matrix to regroup before using the property of '[] 'checks... but this has generated a runtime error.  What Miss me?  Thank you.


  • How to get the reference or the property of a member in OOP node?

    Hello world

    Is it possible to get the referral of a member in OOP?

    After you have created a class and an insert, a member of control in the cluster, I conclude that, when a right click on it, there is no element of "creat-> reference" or "create-> property node?

    So, how to get the reference or the property of a member in OOP node?

    Hello

    There are a few reasons that you can't do what you want to do:

    1 al ' LVOOP ordinary (as opposed to the DVRS in LabVIEW 2009, or some other framework / pattern design) are items of LabVIEW by value, as a cluster and therefore you can not create a reference to a class.

    2. a control of the object (this is what you get when you drop an object on a façade) is a 'black box' because you cannot look inside. This is to support the idea that the class data private. This means that you can't get a reference to all internal control when its on a façade

    3. check the references are valid only for the controls in the Panel before and therefore any class (or other piece of data of LabVIEW) on a wire / shift register / constant / anywhere other that of the façade, will have only the data portion of the available control.

    To access the items within a class, you create the accessor screws (you can create them easily by right-clicking a class (or the folder within the class) in the project tree and selecting New-> VI to access data members.) This VI would at least have a unbundle / bundle node (depending on whether its read/write) and could, if you have many more features such as range checking. You can use this VI whenever you want to read the Member your interested.

    I hope this helps.

    Shaun

  • How to understand the reference trigger as a trigger to stop?

    Hello

    I tried to use an external signal how the trigger works / stop for analog data entry. I had looked for solutions and above all that they suggest to use a reference trigger. But I don't really understand how it is applied. For example, why it should be set to the number of samples before release? For me, the number of samples that are taken are those between the market trigger / stop... I don't really have it.

    Migne

    Hello master,

    As see you, there is no trigger stop easily available with DAQmx. Indeed, you will need to use the reference if you want to trigger the end of the acquisition. What actually a c of reference trigger on a task must begin a kind of continuous acquisition until the trigger occurs. Then by default you will get a certain number of samples before (before) and after (after release) edge relaxation when you read the buffer after the triggering event.

    To read data continuously during the acquisition, you must change a property to change the access mode during playback. You will also need to manage properly reading the buffer has you will certainly get the same amount of samples during the last reading.

    Detailed explanation again as long as there are for example--> http://digital.ni.com/public.nsf/allkb/BA775B0E445BFA79482571FE0032CCEB?OpenDocument

  • When starting, I wonder to choose between XP or Vista? I have XP NOT Vista! How can I remove the reference from Vista?

    My system has been initially implemented as a Dual Boot XP / Vista. Vista has been deleted and I would like to delete the reference from Vista in the trunk. In the case where someone boots into existence no reference of Vista, the systems does not crash but goes in a loop in question, try to Boot. By answering the questions, the system takes you to the initial question, with "an earlier version of Windows or Vista? How can I eliminate this? It is not a problem, once you know you have to select "older version", but if you do not, the timer runs out and trying to boot Vista. Many people use this system and good day, they get caught up in this cycle.

    Best regards

    Mike Lynch

    Best regards

    Mike Lynch

    Your master boot record think you still have Vista.

    You can fix this since the XP Recovery Console.

    You can start RC since a genuine XP bootable installation CD or make you a CD bootable XP Recovery Console using these instructions:

    http://www.bleepingcomputer.com/forums/topic276527.html

    After booting into the Recovery Console, you should be in this folder:

    C:\WINDOWS

    Enter the following command and answer Yes to the warning:

    FIXMBR

    Enter the following command and answered in the affirmative:

    Fixboot

    Remove the Console CD recovery and type 'Quit' to restart your system.

    Please vote my posts as helpful so I can get a lot of points. I'm saving for a pony.

  • How can I remove the reference backup file stored on my C: drive.

    I want a completely new backup but he insists on referring to the internal list of backup files and they no longer exist.

    Hello

    You can try the following article suggestion

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

    Go to the section How to delete a backup I created using the wizard backs up files?

    Also for reference:

    http://TechNet.Microsoft.com/en-us/Magazine/2007.09.backup.aspx

  • During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry. How can I do this?

    Original title: Registery Error Message

    During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry.  How can I do this?

    Hello

    • What were the changes made before the problem occurred?

    I recommend you perform the clean boot.
     
    Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
     
    See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
     
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135 
     
    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  • How to re - activate page body after working on the reference page?

    Dear friends,

    Even now I can't reproduce the following situation in a short test script:

    1. A document is opened and the script finds the existence of a page reference 'FM-calc.
    2. If found, go to step 4
    3. If it is not found, such a reference page is copied from a template
    4. Work on the reference page: replace certain paragraphs.
    5. The user does not see that the script worked on the Ref page and call a dialoge
    6. This dialog box inserts a marker at the current location
    7. The marker is inserted in the reference page where the work has been left

    How to get back to the current page of body (which is the first)?

    Just put

    var pgf = goCurrentDoc.MainFlowInDoc.FirstTextFrameInFlow.FirstPgf;
    

    before inserting the marker will not do.

    Normally the user woud the cursor in the document at a specific location, and then call the dialog box: it works very well.

    But this dialog box remains open when the user changes the document.

    In the new document, there may be no page reference, and as a result, the script creates one.

    The user clicks outside the text frame (illegal location for insertion of marker) - this can be managed with

      if (!goCurrentDoc.TextSelection.beg.obj.ObjectValid()) {
        alert ("Please place cursor in document text flow or select something!");
      return;
      }
    

    But for switching back to work on the page Ref I have not found a solution.

    Klaus,

    I think that there are better ways to handle this. The user should not have to finish the work begun your script. Why not just save the original insertion / text selection before doing a job on the reference page? Then you can restore later. Something simple like:

    var restoreTR = targetDoc.TextSelection;

    As long as the variable remains valid (IE, stays in the scope), you can do anything you want anywhere in the file, then simply return the insertion point to this place when you are finished.  If you have actually changed the view to reference pages, you can use the CurrentPage property to switch back. So, in summary, I would do something like this:

    var restoreTR = targetDoc.TextSelection;
    
    //....  do all the wild Klaus stuff on the reference pages, then;
    
    var bodyPage = targetDoc.FirstBodyPageInDoc;
    targetDoc.CurrentPage = bodyPage;
    targetDoc.TextSelection = restoreTR;
    targetDoc.ScrollToText(restoreTR);
    

    Hope this helps,

    Russ

  • How to duplicate the layer and rename it?

    Greetings to all.

    I do a little tool, and I need to duplicate the layer, change of name and so...

    Tell me how to change the name of the layer? After all, when duplicate layer app.activeDocument () of the range slider layer remains on the same layer. Can be done through hard brace, but I think that there is a simpler solution.

    Thank you

    Layers have a name property that can be changed via the Script.

    2014, use it at your own risk.

    #target photoshop

    If (app.documents.length > 0) {}

    theDoc var = app.activeDocument;

    var theLayer = theDoc.activeLayer.duplicate (theDoc.activeLayer, ElementPlacement.PLACEBEFORE);

    theLayer.name = "test";

    theDoc.activeLayer = theLayer

    };

  • VirtualMachine.PowerOnVM_Task how to get the reference to the returned managed object - task

    Hello

    I try to use the VirtualMachine.PowerOnVM_Task that returns a reference to the managed object - task as ManagedObject reference. (The VirtualMachine is the result of the GET's view)

    I use it in VB:

    Var refTask As Vim.ManagedObjectReference = Vim_VirtualMachine.PowerOnVM_Task (Vim_VirtualMachine.Runtime.Host)

    I can get the reftask like ManagementObjectReference, but here I don't know how to convert the managed - object task. I like to use all the properties and methods of this object.

    Looking at my result of the refTask I can't find many properties...

    Is it possible to retrieve an object just to get the reference to the taskobject somhow.

    Concerning

    Manfred

    Hello

    You can get Moref managed object is either using the cmdlet Get-View or in VB, using the VimClient.GetView method, that is to say:

    Get-View -Id refTask
    

    or

     Dim task As Vim.Task = Vim_VirtualMachine.Client.GetView(refTask)
    

    Note that each MO is the customer's property which is of type VimClient.

    Kind regards

    Yasen

  • How to duplicate the composition that contains nested compositions?

    I know that if you duplicate the composition in the project the object containinf window will not be dependent on original model. But what about complex compositions that has nestled in 2, 3 compositions, how to duplicate the model of the root and make all the comps child separated from the original?

    http://aescripts.com/true-comp-duplicator/

    Mylenium

  • How to get the reference clock 10 MHz off PCI-5922

    Hello

    I'm evaluating PCI-5922 for the my request.

    In my application, PCI-5922 will get agilent signal 33250 function generator and the two instruments will be triggered at the same time with the same trigger signal.

    Is it possible to get out of the clock reference (10 MHz) off PCI-5922? If possible, the synchronization may be easier.

    I expect to get answers of experts!

    Zeehoon

    Hi Zeehoon,

    Before send you the unit for repair, please try one more thing.  The reference clock will be released not in fact until the task or acquisition is started or has committed at least.  Try to add a NO-SCOPE function commit after the property node where you set the reference clock output.

    Jennifer O.

  • Measurement of Phase difference of audio - learning how to set the reference

    I'm trying to measure the difference in phase between two audio inputs. (Left and right channel of my sound card)

    Both are free running 1 kHz audio samples that come in and out of phase.

    When the samples are in phase, everything seems to work fine and shows no phase difference.

    However once that signals start to emerge from the +-10deg phase the result keeps jumping around.

    It seems to be the fact that it is changing the reference to determine the phase.

    When I view the phase of the output of a channel is a sawtooth waveform, from 250deg and then wraps round to-110deg

    What I want, it's an entry set to 0 degrees and see the other inputs of difference of phase against it.

    Is there a way to give a signal as being the reference or another strategy?

    Thanks in advance for any help.

    PLEASE NOTE THAT THE acquire.jpg IS ACTUALLY THE VI.

    It wouldn't download like the vi. Please rename extension to acquire.vi to see.

    Finally managed to find the problem.

    Red rooster, I tried to replace your entries simulated with audio inputs card his real world and things turned out horribly.

    It doesn't seem to be a translation between the two. (Perhaps because of my understanding of Labview garbage)

    LabVIEW uses the internal reference of the DAQ cards in order to make phase measures.

    That's what all use the phase VI of measure and which lack of cards not NI - DAQ.

    That's what I thought that missed me first place but there's no way I can see simulations your own.

    To work around the problem, I used zero crossing detectors in order to compare the time ahead or lagging behind the benchmark for the calculation of phase.

    I got the core of the detector from somewhere on the forum but have lost the actual page. (my apologies to the author who deserves the credit)

    Anyway, hope this hepls someone.

Maybe you are looking for

  • NVIDIA Quadro: I plug 6-pin power adapter or connector 8 pin?

    I am trying to install my graphics card Nvidia Quadro 6000 on a HP Z820 with a PSU 1125W The Quadro card: 1x8pin auxiliary power connector and power connector auxiliary 1x6pin. My questions are 1. in the connection of my power adapter, do I plug the

  • Windows guard closing SWTOR

    I recently got a virus that would allow me to open any .exe files. After I reformatted my HARD drive I ran all the updates of Windows and re-installed a game I tried to play, Star Wars The Old Republic. I was able to open .exe files, but whenever I s

  • New hard drive for compaq presario c500 running vista. I want to switch to windows 7

    I'm fixing my laptop aunts. He a presario c500 compaq running windows vista. I bought a new hard drive. I would like to install windows 7. She could get windows 7 discs for free when she got off the computer, windows 7 was not yet. They have offered

  • I want to only send albums on my I pod

    I recently bought an iPod with the only intention to export specific albums in it to be read when they are wanted. Is there a way I can do this without having to use itunes. Albums that have been imported into itunes are displayed as individual track

  • Sizes

    I'm about to build a new system (Re: build PrPro PC / DSLR 1080 p)Quick question about the case. I have a box of round full size of... oh, let's say 2001. It's an ATX, this large beige monster of my former recording studio.Obvious that it i ' l need