Duplication of images

Similar Questions

• Lightroom duplication of images

  I have a problem with Lightroom that just started happening.

  In my catalog, I see two of the same image for some reason, see below.
  

  

  These are the same images with the same file name (800-0-12430 - R2.psd) and in the same place (the folder is WHITBY)

  When I go to the folder in question there is a single image with the file name, so I don't see where Lightroom becomes second.

  

  I tried to remove the duplicates, but when I sync the folder they reappear.

  I don't import suspected duplicates ticked.

  Any ideas?

  Thanks for the suggestions, I checked the integrity of the catalog, and it did not come with errors.

  Ultimately I made a new catalog records into the new catalog and this time there is no duplicates!

• Time manipulation

  Hi guys,.

  I took a peek at some of the video-Copilot tutorials on the manipulation of time and have a question or two around After Effects and frame rates.

  The Panasonic camera I use, according to the documentation, allows to record several frequencies of images it has Variable speed capabilities. Footage native to the camera, right to the map only records around 192 MB per second (24 MB) and I don't think it's very good. If I save on an external device, the same second 10 results in 1880 MB / second (235 megabytes). It's obviously much better and it contains much more information to allow for more post work.

  The problem I find, is that, according to the documentation, you can not register higher than 30 FPS to an external recorder, HD - SDI cannot handle 1080/30 p higher data rates. If I use the device (a Samurai recording device) apparently, each image is automatically embedded as a field in a stream of 1080/50i.

  of course when I import directly into After Effects, I need to re - interpret the images and select the appropriate first - field movement is so good enough as slow movement (if they are imported into a composition standard 25 fps - I work in PAL land) with questions obvious movement (strobe or tilt). My question is this:

  Is this the right way to go, or should I save standard 25 fps from the camera to the recorder (at a rate of 1766 MB / second (220.8 megabytes) data) and purchase a manipulator of time to party like Twixtor do the slow downs?

  There's an interesting paragraph in the documentation for the camera I do not understand, and I'm not familiar with the mentioned software - if you allow me, I would like to quote paragraph (ok, I'll paraphrase) and see if someone can explain a little better?

  "With the handling of mail, you can get 1080/60 p out of the AF100. the camera records already to 60 progressive frames per second. When the unit is in 1080/24 p or 1080/30 p and a cadence of 60 is selected, the camera records 60 discrete images every second. the file would have a rate of playback 24 p or 30 p encoded in it, but what happens if you have changed the reading rate? say, what happens if you went in Cinema Tools and 'Model' images to have a time base of 59,94 p instead of 29.97 p or p 23.976? of course, it would become whole, live 1080/60 p footage. 60 fps played back at 60 fps is full-screen, full of quality 1080/60 p. and of course the same applies to the 50 Hz mode - leading to hand full, 1080/50 p'

  The parameters of the camera in Pal-land are PH 1080/50i, PH1080/25 p, 720/50 p of PH and PH720/25 p - since the that give better quality 50i, paragraph preceding confuses me a bit, I'd get 1080/50 p how about her? -of course, I'm assuming that the device is set to 1080/25 p and the Frame rate is set to 50 fps to above results. in any case, once again, perhaps not an entirely AFter Effects question, but any help would be greatly appreciated.

  Stone

  I know isn't what you're asking here. If you're planning on doing idle then save the higher frame rate, you can. If you want the time to match the images in real time to be interpretetd at the same rate, which has been used for filming. If you want to change the speed, to understand what will happen when you change the frame rate interpretation. Let me explain.

  If you place then 10 seconds of film 60 p within a composition that is 20 fps or 24 fps, or 99 fps suddenly will be still long 10 seconds exactly. If the rate is greater than the rate of composition some of the frameworks will be abandoned. If the rate is less than the pace of the composition of that some of the frames will be duplicated. Movement of falling frames are not as noticeable as of artefacts of movement caused by duplication of images. Interpolation and other techniques available in After Effects to alleviate these problems. The third-party solutions like Twixtor can do a better job than the tools that come with AE but may be unnecessary unless you consider images slow way way down.

  Let's talk first progressive images. If the rate is greater than the frame rate of your publication and you intend to use the built-in tools, the appropriate technique must match the cadence of the composition. If your publication is 24 fps then interpret the film at 24 frames per second. If the composition is 30 frames per second or 29.97 FPS then match these numbers. Then ten seconds of 60 p footage in a composition of 30 frames per second would play for 20 seconds, or be at 1/2 speed. Ten seconds of film 60 p in a model of 25 fps would play for 24 seconds. If you use the EA built in tools then this is your best option bit matter how you want to change the playback time.

  If you use a third time like Twixtor manipulation tool, then you must follow their instructions. Twixtor will work just fine if you match the cadence at the actual rate of the images.

  If the original movie is interlaced, you have another pair of sleeves. 50i footage there really 100 fields per second, or are there only 50? 60i pictures really 60 FPS with 120 fields per second or is it 59,97 frames per second at 29.97 frames per second? In both cases it is true. There is only one way to know for shure. You separate the fields and set the pace of your best estimate. Then, create a new composition with your images by dragging on the new icon of the model or by selecting the images and choosing new layout of sequences. Then you open the parameters of the model and to double the pace of the composition (you can do the math in the field by typing * 2 after the value that is there). Then scroll through the images of an image using the Page up key. This will immediately show if you have well interpreted the rate and whether or not the order is correct.

  I have not run specific tests on your camera or your external recording device, but in all likelihood, your 50i footage is 50 frames per second and 25 frames per second. IOW, the correct interpretation is probably 25 fps separating the high fields first. Test to make sure.

  Once you know exactly what you have, you have three options. My usual technique is to make just this model frame lined with a production format so I did not need to deal with interlaced images and the rest of my production pipeline. The other is to use the model frame doubled as a source of sequences for any handling time you will make ensuring that preserve the cadence of the nested compositions is turned on. The third option is just to use the images correctly interpreted.

  One last thing before I go. If you use a third-party solution, you must follow their instructions specifically when you use interlaced images. Images must be interpreted correctly for third-party solutions work properly.

• Duplication of the Image

  Hi all

  Could help you find duplication of the images in the document.

  for example, need to find the "index2.jpg.

  Screenshot is below to:

  

  Thanks in advance

  Siraj

  Hi Siraj,

  Try this,

  var doc = app.activeDocument,
      _links = doc.links.everyItem().getElements(),
      linknames = [];
  for(var i =0;i<_links.length;i++)
  {
          linknames.push(_links[i].name)
      }
  linknames.sort();
  var found = [];
  for(var i=0;i
  Kind regards
  Cognet
  		   

• Duplication of the images with multiply does not quite...

  

  Okay, so I'm puzzled.

  I just gave and got on the train CC after years of use of CS5. I decided to try this whole thing of CC community instead of just googling so this is:

  I want to create a transparent image (see image above) and the best option that I see so far is multiply, but it leaves a darker area where the images overlap. I tried to use the wand, but you know how sticky, it seems later. There MUST be a quick and simple way to do this kind of stuff so here I ask the Lords for their expertise.

  Thanks in advance.

  Select all layers, then go to Edit > auto-merge layers

  Try with just the Normal blending mode on each layer.

• Duplication of content (image + text) to multiple pages

  Hello

  I want to reproduce the same content (text, images, etc.) on multiple pages. (See attachment)
  

  
  

  I know that you can copy any custom settings for pages (IE. (Master Page), but these parameters only replicated right dimensions?

  I just need to copy the layers (containing the content) and drag it to each new page created?

  
  

  Please notify.
  

  If you need to change the master page text to a document page, you can override the image by pressing command + shift (Mac) or Ctrl + Shift (PC) by clicking on the image.

• Duplication of an image

  Hello. I am doing a map for a fantasy book and must be able to quickly duplicate the mountains. Is there a way to take a mountain (already drawn, colored and cut) and duplicate it without creating a new layer? I tried creating brushes and patterns of stamps but neither do the simple task I am looking for. I just want to be able to place a complete picture of the way in which you place any shape with a brush. Any ideas? Any help is appreciated!

  Alphus Domitar wrote:

  Is there really no way to stamp an image pre-made in photoshop?

  Yes, there is the Clone Stamp tool.

  Here is an example with a single source clone stamped several times on a layer. Stamps can be as colorful as you want, of course. The CSE Panel allows you to use several sources and scaling to provide variety.

  

  

  

• Problem with duplication of the images during distillation

  I have an announcement that I created in InDesign. When I export to PDF for proofing it very well. But when I distill to edit it strikes the color of the images overlap. I enclose the images so you can see what I mean.

  That's what it should look like:

  

  This is what he does after distillation:

  

  Here's a screen Cap parameters distiller:

  

  And here is my print settings:

  Print preset: Dist color
  Printer: PostScript® file
  PPD: Acrobat Distiller
  PPD file: C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\ADIST5. PPD

  General
  Copies: 1
  COLLATE: n/a
  Switch: Off
  Pages: all the
  Sequence: All Pages
  Spreads: Off
  Print templates: Off
  Impression of the layers: visible and printable layers
  Print nonprinting objects: Off
  Print blank Pages: Off
  Print visible guides and baseline grids: n/a

  Setup
  Paper size: Custom
  Paper width: Auto
  Paper height: Auto
  Page orientation: Portrait
  Paper Offset: 0P0
  Paper gap: 0P0
  Cross: n/a
  Graduation: 100%
  Constrain Proportions: on
  Page position: centered
  Thumbnails: Off
  Tiling: Off

  Marks and bleeds
  Crop marks: Off
  Brands of purge: Off
  Registration: Off
  Color bars: Off
  Information page: Off
  Type of printer brand: default
  Brand harvest weight: 0.25 pt
  Brand of offset from the Page: 0P6
  Use Document bleed settings: on
  Top of purge: 0P0
  Bottom purge: 0P0
  Serving inside: 0P0
  Serving outside: 0P0
  Slug area: Off

  Output
  Color: CMYK test
  Black text: n/a
  Trapping: n/a
  Flip: no
  Negative: n/a
  Screening: default
  Simulate overprint: Off

  Graphics
  Send data: all the
  Download: full
  Download PPD fonts: on
  PostScript®: Level 3
  Data format: ASCII

  Color management
  Document profile: US newsprint (WINK 2007)
  Color management: Let InDesign determine colors
  Printer profile: Document CMYK - US newsprint (WINK 2007)
  Keep the CMYK numbers: on
  Profile of the evidence: n/a
  Simulate paper color: n/a

  Advanced
  Print as Bitmap: n/a
  Bitmap resolution: n/a
  OPI Image Replacement: Off
  EPS: Off
  PDF: Off
  Bitmap images: Off
  Transparency flattening preset: [medium Resolution]
  Ignore spread overrides: Off

  We use Distiller 5.0 and InDesign CS5.

  Is that affected the color (gold/yellow) a Spot color by chance?

• Same image several times in a project?

  Can someone explain to me how I can use the same image several times in the same project?

  What kind of project?

  If you create a book or calendar, or card, you can move the film strip with photos to 'Placed Photos' and then you can add the same photo for additional photo boxes, for example:

  

  For a slide show select the picture to present, and then use the combination of keys ⌘D or "Image > duplicate" to create several versions of the same photo and add additional versions in the project.  "Duplicate" actually not dupliquera not the original file. All versions will share the same original.

  For example - the same picture several times in a slide show:

• Duplication of any libraries - any way to merge?

  Hello

  In my 'Images' folder, I have now two libraries - iPhoto Library and photo library.  Having considered the two libraries there is a lot of overlap and duplication between them, and as they both occupy about 110 GB each I will refine them.  Y at - it a simple way to merge libraries, removing duplicate images in the process?

  Incidentally, I just opened the iPhoto library in iPhoto and recalled iPhoto how elegant has been compared to its replacement teen Photos - this is the progress apparently

  John

  You can remove whatever library is not in use (probably iPhoto) but you will not regain a lot of space. The two libraries use the same set of images, which are the bulk of the size.

• After travel or time change, capture image downloads new pictures

  I do not erase the cards immediately after the transfer of photos to my computer. Sometimes I'll use a card that has files that it contains are three months to one year, but which have already been uploaded to the images folder. After the "spring from here" and "fall back" time changes, when I use Image Capture to transfer images I've done since the last download, it also downloads the 'old' still once, change the time of the capture of an hour and adding a space and a '1' at the end of the file name. I do not change the time in my camera for changing the time twice a year, and I leave winter time in the area where I live most of the year. If I'm living in the same place for more than a week or two, I have sometimes, but not always, change the computer's time (or let the computer determine the area according to its location).

  To further complicate things, this also happens if I travel between two time zones. There is in the computer of the images that have been made in Vancouver (Pacific time zone) on May 3, 2015. On May 4, while remaining in Vancouver, I downloaded the files on the computer. Such a created file date shows may 3 at 21:13. On May 10, while in New York City, I downloaded images made in New York on 8 May. At the same time, Image Capture download new images of Vancouver, but shows them as having been made three hours earlier than that shown in the previous (Vancouver) download. Very probably, at this time, the computer has been set to automatically set the time zone according to the place or I reset the area because I was going to be in New York for several months. Below a screenshot shows this.

  Of course, this duplication takes twice the storage space. This means also having to spend time to throw the double copies. Or triple copies, sometimes quadruple copies, if the memory card contains pictures that spans two or more changes seasonal clock.

  Is there a way to avoid this? If data in the camera exif photo has not changed, why the computer would have any idea that the official time (or time zone) was different?

  Thanks much for the ideas you may have.

  Leonard

  

  Is there a way to avoid this? If data in the camera exif photo has not changed, why the computer would have any idea that the official time (or time zone) was different?

  Photos will use the time current system as the time to interpret the timestamp on the pictures in the camera.

  If the camera time is different from the time of your system, it makes it easy to import, if you set the area of working time in the preferences system at the same time basis as the camera before importing new photos.

• In trying to move the photos to the key, I've accidentally moved into my office - they kept sort of duplication and there is 7 000 or them - how to remove the easily?

  Mac Pro 10.11.4 17 "

  In trying to move photos to the key, accidentlaly I moved into my office - they kept sort of duplication and there is 7 000 or them - how to remove the easily? I've been

  Open your desktop folder in the Finder, then type 'image' in the search field in the Finder window toolbar and value of the research for "kind: Image".

  Define the scope of the search for "Desktop".

  Now, you can select all items in the window by entering ⌘A, then drag the photos in your Inbox.

  Check a second time, that the scope of the research really is 'Office' and not 'this computer '.

  

• previous image is visible after the page turn on the screen PRS-950

  I can clearly see the shadow of the previous image if I turn the page on my drive, and next page has no duplication of text or photo.
  Say, previous text clearly visible if you view an empty page or an image.

  What is a factory default or current behavior at PRS-950 daily edition (and other newer models)?

  It is normal if the page was present for an extended period. to resolve this problem if the page is hard to read, tilt back a few times and it will be clear.

  Here is more information on your ghost image problem.

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/41678/c/65, kw/66/41678

  Best regards
  Kimberly

• How can I fix double images and overlapping and phrases when scrolling

  How can I fix the overlap and duplication of the images while scrolling

  Hello

  ·          On what application does the problem occur?

  ·          The problem happens only when you scroll?

  ·          Were there any changes made to your computer before this problem?

  However, check if the problem persists in Mode without failure.

  See: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

• Windows 7 duplication of files

  Hello

  When I save pictures in the pictures folder another copy is found in the documents folder.

  They are of duplication for some reason any

  Thank you

  N ° none of your documents will be deleted.

  Take a look in Windows Explorer.

  Click on "image library".

  By default would be that you see:

  

  Most propably you'll have more of '1 location '.

  Click on the blue 'place '. Here, you can change where it is stored.

  Please read: http://www.howtogeek.com/howto/10283/understanding-the-libraries-feature-in-windows-7/