Duration of lock FireSIGHT/SourceFire user configuration?

Similar Questions

• doc files locked by another user. Occurs when the laptop computer on the new Word documents opening.

  Just acquired a computer laptop and everything seemed to sync with SkyDrive and my desktop PC, except that the Word doc files will not open. Error message _ .doc is locked by another user. By selecting 'Open read-only' displays a different error message.

  All other types of files and doc files produced local seem to work well. I can access and open files on SkyDrive.com with both computers. docx files do not seem to be affected.

  The problem occurs only on my laptop. To access the files established by clicking on it in the local SkyDrive open Word (2010) with the error message (the file is locked by another user).

  Files open very well during the passage of SkyDrive.com (from mobile) and in all desktop scenarios. And can access the files on the desktop to the laptop via the network. The two computers configured in the same way of C:, D: (SkyDrive on this partition) and E:

  I can copy files over the network to the laptop E: partition and they access very well. Copy them to D:\SkyDrive (once the original has been removed and SkyDrive left) same problem occurs. Network's WiFi in the House.

  Does not occur with the new files created on laptop, the files in the root directory of the laptop (only subdir) skydrive and .docx files.

  I have updated the advanced settings of sharing and security on the two computers without success.

  All other types of files seem fine.

  Help appreciated.

  Stephen

  Greetings from the happy camper,

  Long process, simple solution. Thanks to Madeni K N for suggestions that lead to the solution.

  The drive letter has changed

  The temporary internet folder to E: and changed environment variables

  Moved temporary internet files to E:

  Without success

  The drive letter has changed back to D:

  Deleted from the temporary internet folder.

  Success!

  Checked E: temp internet files and notice a file called Content.Word

  Empty file 0 bytes

  Copied to the temporary internet folder in D: less Content.Word file

  Reset environment variables and temp internet folder to D:

  No problem! Yes team!

  Comments and suggestions appreciated.

  Thank you all

  Stephen

• What is the "User Configuration" password that is requested after the update?

  OSX makes an update last night (I'm on 10.11.3) and after it reboot it asked me password "User Configuration", see picture below. I am aware that you can just restart workaround - but as we have seen repeatedly in our office now, we would like to know exactly why it's happening.

  Can anyone confirm that this is a bug?

  

  Just press Command + Option + command + DELETE keys and it will switch to full name of user and password.

• Install VISTA SP2 - all my old documents are "locked by another user.

  I used Windows update to install the Vista SP2 and now all my existing documents came as "locked by another user", or in the case of older documentation and worksheets in read-only or corrupt.  The docs are very good, I can copy it to another machine and they work.  In addition, the file attributes are NOT marked read-only.  Any ideas?  I was going to cancel, but the restoration of the system shows no point of restoration before the update, even if I manually created a Saturday.

  Thanks in advance.

  Ted

  Hi tearnott,

  Thank you for using answers Forum.

  Have you tried creating a new user as suggested by Debbie?

  I found this on the desktop support site:
  http://Office.Microsoft.com/en-us/Word/HA011406121033.aspx

  If you cannot make changes to a document, your Word program cannot be enabled, the document can be locked for editing or protected by password, or you could try to modify a document or text in a protected form.

  Note   You cannot edit an open document in Word Viewer, but you can copy text to the Clipboard to paste into other applications.

  This command is not available because the document is locked for editing

  If you see the following message when you try to modify a document in Word 2003 or Word 2002: "this command is not available because the document is locked for editing" your Word program can not be activated. To check, follow these steps:

  • On the help menu, click Activate Product .

    If Word is enabled, a message tells you that the product has already been activated. If Word is not enabled, the Office Activation Wizard appears to guide you through the activation process.

  Note   You can open a Word document, even if the program is not activated, but you cannot use many commands and you cannot save the document.

  The document is locked for editing by another user

  If you see the following message when you try to modify a document in Word 2000 or Word 2002: "the document is locked for editing by another user," Word previously might have shut down improperly while the file is still open.

  The document can also be locked from editing if the original version of the document is already open, or if the document is shared over a network and another user opened. This applies to Word 2000, 2002 and 2003.

  Note   If the Group similar taskbar buttons is selected, the original version of the document can be open without your realizing it. Click Word in the Windows task bar to see the names of all the Word documents that are open.

  Your document is protected by a password

  If the owner of the protected the document with a password (including a blank password), you might be limited to read-only access unless you enter the password. If you forget or lose a password, you cannot change the document.

  This modification not allowed because the document is locked

  If you see this message at the bottom of the application window when you try to modify a document: "This unauthorized change because the document is locked," the document is protected by a restriction of amendment no changes (read only) or comments in Word 2003 (or a restriction of comments in Word 2002 and Word 2000). The author of the document to restrict editing features to protect the Document. Menu commands may also be unavailable, depending on the permissions granted to your by the author of the document.

  Note   When you open a document protected by Information Rights Management (IRM) in Word 2003, you might have permission to view the document but not to change it. When you open the document, the Office shared workspace pane opens by default on the right side of the application window. In the task pane, click View My permissions to see your permissions.

  I hope this helps. Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Machine is locked with a user account

  Hello

  I'm a system administrator. I will check, if a machine is locked with a user account or not connection of the device by remote control tool.

  Is there any tool to run from my machine to check that a machine is in disconnect status or locked with an account. It will help solve the problems and avoid the time Delisle

  Kind regards

  Carter S

  Hi Cedric,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the Sub forum. Link:http://social.technet.microsoft.com/Forums/en-us/winserverTS/threads

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I continue to put my password. says locked and the user swithch. I tried to change the standard account and it won't let me. How to unlock it?

  It is a novelty that has begun.  I have to put my password because it says "locked" under my user name and it says change user.  I can't open my account.  I tried to change it to 'standard', which I don't know how it changed? or did my computer to do this.  If I clicked on "lock computer", how I to unlock?

  Ma-donna

  He stopped to do so, so do not know what happened.

  Thanks anyway

  Madonna

• Display fields in the User Configuration

  Good day to all.

  In the configuration of the interface, we have the user configuration option to define fields that appears when you configure individual users.  When you go to User Configuration and click on a letter/number in the "list users starting with the letter /:" section, is possible to configure the display in the right pane which now shows just

  User	Status	Group	Network access profile

  We do not NAP is a useless field for us.  I want to set it up for one of our pre-defined user configuration fields.

  Thank you

  Dwane

  Dwane,

  This view is not configurable. It may be a feature request.

  Thank you

  ~ JG

  Note the useful messages

• ACS > User Configuration

  When the user authenticates in ACS v3.3, a profile is created and stored under the User Configuration. When employees leave the company, to delete this profile. We use the external database which is Active Directory.

  Questions

  (1) if the Active Directory account is disabled, the user will be able to connect because the identification information is recorded in the ACS?

  (2) is there a way to expire these credentials as in 24 or 48 hours?

  In ACS3.3, you can expire the account also if the account is disabled and that the user put in cache in ACS points to the database of windows for authentication, in that it should not allow the user.

  Here is where you can set how long the account is active for:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/3.3/user/guide/u.html#wp273167

  Thank you

  Tarik

• ODI - planning - the object... is locked by another user?

  I am trying to execute an interface to remove L0 in the Planning, but I get an error message:
  
  org.apache.bsf.BSFException: exception of Jython: Traceback (innermost last):
  "< String >" file, line 23, in there?
  com.hyperion.odi.planning.ODIPlanningException: com.hyperion.planning.ObjectIsLockedException: plant object is locked by another user.
  + com.hyperion.odi.planning.wrapper.PlanningWrapper.beginLoadDimension (Unknown Source) +.
  + com.hyperion.odi.planning.ODIPlanningWriter.loadData (Unknown Source) +.
  + sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method) +.
  
  How can I avoid it? Thank you

  Hello

  Sorry Nico who is bad planning not a mistake to essbase.

  The error means planning is locked, this usually means that build a dimension has been arrested before completing and left a lock on the app.

  There is a utility in the planning\bin directory, called HspUnlockApp , launches the present, and it will unlock the application.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Windows 7 - GPO using a duration to lock workstations

  We have recently implemented a policy of locking of workstations that does well with some of our users. At this time the setting is locked after 2 hours of inactivity. We had complaints that it is too short (which we're not changing) or it is too long. Finally we will shorten, but at the same time we told users who think that it is too long to hit windows + L or CTRL + ALT + DELETE to lock their screens. Some people think that even if this is too difficult.

  My question is, is it possible to configure it so that it hangs at 2 hours, but if users want to make shorter now, they have this ability, is that possible? We have more than 200 machines so we want to make it as universal as possible, but we cannot choose some complain to put in an another ORGANIZATIONAL unit with a different strategy.

  Any help is appreciated!

  Hello

   
  I appreciate that you have provided detailed information about the issue. However, this problem would be better suited in the TechNet forum because the computers are on the field, I suggest you to send your query using the link below.
  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro
   
  Hope this information helps. If not, please do not hesitate to post, we will help you further.

• Cannot open gpedit on Win 7 after activation of the User Configuration administration\systeme ordinateur\modeles settings

  I opened gpedit and navigated to the Configuration\Adminstrative administration\systeme user.  Then under setting I clicked on "run only the Applications Windows specified, set it to on, then in the section show Options clicked the button next to the"list of authorized applications.  I typed in a few apps clicked ok and closed gpedit

  When I tried to come back in gpedit, he gave me the following message: "this operation has been cancelled due to restrictions if effect on this computer.  Please contact your system adiminstrator. »

  I am an administrator on this pc, but it won't let me do anything.

  Help, please!

  You yourself locked out.  A restore from a previous backup (you do not have a right) or a repair installation of the operating system dvd can fix this.

• MT42: HP Easy Shell - allow user configuration changes

  Hello

  We use HPDM to capture and deploy images of Thin Clients HP MT42 Mobile with Windows Embedded 7 HP easy set up shell. The enhanced write filter is configured, so no user changes cannot be saved.

  This works very well for us, but now we want to allow users to keep their wireless settings.

  We allow them to configure wireless networks, but of course, these changes are lost after each reboot.

  I know that you can work with the exclusions in the write filter, but I can see this goes only for files and folders.

  How can we ensure that these changes made by users wireless are persistent?

  For UWF, please follow the steps below.

  1. Add the following path in the file Exclusion list
     C:\ProgramData\Microsoft\Wlansvc\Profiles\Interfaces\
  2. Add the registry path in registry Exclusion list
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WlanSvc\Interfaces

  FBWF, please follow the steps below.

  1. Add the following path in the file Exclusion list
     C:\ProgramData\Microsoft\Wlansvc\Profiles\Interfaces\
  2. Disable FBWF and create a file .reg with the following content:

  Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\RegFilter\Parameters\MonitoredKeys\5] "" ="HKLM ClassKey. "FileNameForSaving"="_Wifi.RGF." 'RelativeKeyName '=' Software\\Microsoft\\WlanSvc\\Interfaces. '

• Power as an XP user configuration

  Hello!

  I would like to change my configuration of power under XP Pro SP2 as a normal user without administrator rights. Of course, I have to use the tool, but this works only in administrator accounts.

  Any ideas?

  See you soon

  Lutz

  Hello

  Well, in my opinion you can t he change without administrator rights. In this case, your user accounts have rights.
  As far as I know the user with the admin (Administrator) rights must log on to your device. Then, you choose the power saver properties. There is a Security tab.
  The option control must be marked to allow under your username.

  Good bye

• Duration of the complete end-user compatible DirectX 9 .0c (November 2010)?

  Hello.

  How did Microsoft/MS did not show its full duration of the DirectX 9 .0c end-user (November 2010) on the Internet? I don't want his dxsetup.exe to download parts online on my crappy Internet connection. :(

  Thank you in advance. :) Ant @ Ant links fed quality (http://aqfl.net) and The Ant Farm (http://antfarm.ma.cx).

  Hi Ant,

  We do not know when the update is available from Microsoft.

  However, you can view the Microsoft Download Center for published updates frequently.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Public User - Configuration vs request attribute

  ADR 3.0, APEX 5.0.2

  Most of our APEX applications have been there since earlier versions, so the application User Public attribute is set to HTMLDB_PUBLIC_USER. The configuration file apex/apex/conf/apex.xml ADR specifies the HTMLDB_PUBLIC_USER and the password. But our database audit trail (sys.aud$) displays connections made by APEX_PUBLIC_USER from the server running ADR. I checked, and I see some newer applications with the set of attributes User Public to APEX_PUBLIC_USER but that is what causes the database connections? I thought that all database connections have been made under the user name specified in the config apex.xml ADR file. I even blocked the apex_public_user account and the app worked fine.

  This who/what connects as apex_public_user and why? What is the link between the user of the DAD in apex.xml and the application User Publicattribute?

  Thank you

  Hi VANJ.

  Well, the good news is, that you have set up users rest (with the apex_rest_config.sql script) correctly.

  Everything works correctly, the following occurs:

  1. To download the static files in APEX 5 they had put in place a mechanism to support relative paths. With ADR, they use the APEX rest Webservices by the users APEX_LISTENER and APEX_REST_PUBLIC_USER. With mod_plsql they use PlsqlPathAliasProcedure wwv_flow.resolve_friendly_url ( https://docs.oracle.com/cd/E59726_01/install.50/e39144/http_server.htm#HTMIG29263 )
  2. With ADR, the following sequence occurs when you use a static file:
     1. a connection is established using APEX_LISTENER to search for the required RESTful webservice definition.
     2. is a connection using APEX_REST_PUBLIC_USER and a proxy connect via the user APEX_PUBLIC_USER that happens in the database itself. The apex_public_user session is not connected directly from the outside, but with apex_rest_public_user and then the identity of the user is enabled.

  You can see the definition here:

  

  So what is happening is perfectly normal, and you can even watch behind the scenes.

  I created a web service by using the following query:

  Select ' AUTHENTICATED_IDENTITY: ' | sys_context ('USERENV', 'AUTHENTICATED_IDENTITY'),

  "CURRENT_SCHEMA...: ' |" sys_context ('USERENV', 'CURRENT_SCHEMA'),

  "CURRENT_SCHEMAID...: ' |" sys_context ('USERENV', 'CURRENT_SCHEMAID'),

  "ENTERPRISE_IDENTITY...: ' |" sys_context ('USERENV', 'ENTERPRISE_IDENTITY'),

  "IDENTIFICATION_TYPE...: ' |" sys_context ('USERENV', 'IDENTIFICATION_TYPE'),

  "OS_USER...: ' |" sys_context ('USERENV', 'OS_USER'),

  "PROXY_USER...: ' |" sys_context ('USERENV', 'PROXY_USER'),

  "PROXY_USERID...: ' |" sys_context ('USERENV', 'PROXY_USERID'),

  "SESSION_USER...: ' | '. sys_context ('USERENV', 'SESSION_USER'),

  "SESSION_USERID...: ' |" sys_context ('USERENV', 'SESSION_USERID'),

  "SESSIONID...: ' | '. sys_context ('USERENV', 'SESSIONID'),

  'SID...................: '|| sys_context ('USERENV', 'SID'),

  user

  of the double

  In fact, this will reveal the different identities:

  

  In this example, the user executing the statement is 'TRAINING', but the proxy connection to the database user is "APEX_REST_PUBLIC_USER". This proxy authentication is really cool because she seems to be a separate direct connection using the schema of analysis... and everything in the context (even select user to twice) works very well. This is different from the way in which APEX implements the schema of analysis using dbms_sys_sql.parse_as_user which sometimes causes headaches.

  in any case, everything looks good,

  ~ Dietmar.