Duration of the complete end-user compatible DirectX 9 .0c (November 2010)?

Similar Questions

• Duration of the session for users

  Hello all-
  
  If a user is connected to the Essbase database through the spreadsheet. How can I control their time of connection with the database. Many users will connect using the spreadsheet and do not disconnect sessions and I can see connected to the sessions. Is
  
  It there a way where in I can limit the time that they are linked to databases and are automatically disconnected. My guess is not sure that, if a user disconnect its meetings continues to be connected to the database / don't know
  
  What happens if the user closes the spreadsheet without disconnecting?
  
  Thank you!

  Hello

  You can set session parameters in environmental assessments or via maxl (some of them could if applies not in essbase uses the security of shared services)

  Reading of: -.
  http://download.Oracle.com/docs/CD/E10530_01/doc/EPM.931/html_esb_techref/MAXL/DDL/statements/Altsys.htm

  Set session_idle_limit
  Set the interval of time allowed for a session to be idle before Essbase server disconnects the user. The minimum limit that you can set is five minutes (300 seconds). When the idle session limit is set to none, all users can stay connected until the Essbase server is stopped. The default limit is 60 minutes.

  You can also logout sessions using EAS or maxl there is a list of the different options in the link above.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Add the portal end-user.

  Hello
  
  Currently, my requirement is to add a user to a portal to a specific role through registration. I created a registration form and all users can register. But I don't know how to add a user to a role, so that I can show the page accordi ng or relevant information to this role.
  
  I have a 'DEALER' role, while when the user record itself, in a list of the roles only 'DEALER' role is assigned to this user. Once done, I can show the relevant page or information according to this role.
  
  I would like to know how to apply it.
  
  
  
  Thank you
  Bharat

  http://download.Oracle.com/docs/CD/E13155_01/WLP/docs103/Javadoc/com/BEA/p13n/security/management/authentication/AtnManagerProxy.html
  http://download.Oracle.com/docs/CD/E13155_01/WLP/docs103/Javadoc/com/BEA/p13n/security/management/authentication/AtnSecurityMgmtHelper.html (for AtnProviderDescription)
  as mentioned, there are easier controls available

  Published by: deepshet on October 19, 2009 20:59

• What is the best SSD 2016 compatible Mac for a Mid 2010 13 "MBP?

  Hello

  I'm looking for a compatible Mac (no worries) SSD for my Mid 2010 13 "2,4 Ghz MBP.

  I can't afford to upgrade to a new MBP. but a 240 GB, 250 GB, 256 GB SSD is desirable.

  I've read up, and it seems that the Samsungs are a chore for macs.

  Any suggestion would be appreciated.

  Thank you.

  I got excellent results with SSD OCZ and OWC. I also used Samsung 840 and 850 (not professional) without any problem on several of my computers. OCZ and SSD from OWC are quite compatible.

• "Help text" change for end users?

  Hello
  
  I like to leave the key end users to change the element help text on the pages of the APEX, without giving access to Apex Builder. Is this possible? We use the APEX 4.1.
  
  Tamás
  
  Published by: Tamas Szecsy on May 22, 2012 12:48

  I guess you need to implement a custom solution where you can create a mapping table that holds the info on AID for the ELEMENTS of the apex.

  And change your point label template to get the help of your custom table.

  So now, you could provide the end user with the help of change required function.

• Hide columns in the front-end, i.e. the Oracle answers

  Hello
  
  I wonder if it is possible to hide the columns considered non-essential as the answers ID so that the front end users only see the column that should
  be exposed for reporting.
  
  Thank you

  Remove unnecessary columns from the presentation layer in the repository.

• Better make a link to the latest DirectX end user runtime web install?

  What is the best way to link (from our application) to the latest DirectX end user runtime web install?

  http://go.Microsoft.com/fwlink/?prd=11234&pver=latest%20DX%20Web&plcid=0x409&clcid=0x409
  or
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2DA43D38-DB71-4C1B-BC6A-9B6652CD92A3

  The FamilyId remains the same when a newer version of the runtime is out?
  Thank you for any suspicion!

  Hello

  The question you have posted is related to the coating and would be better suited to the MSDN Community. Please visit the link below to find a community that will provide the best support.

  http://social.msdn.Microsoft.com/forums/en-us/category/EmbeddedWindows

  Amrita M

  Microsoft Answers Support Engineer

• Problem running the Runtime Web Installer for DIrectX end user in Windows 8

  When I try to run the Web Runtime DirectX installer for the end user, I get an error when the installation starts. The error indicates that "the required CAB file for installation cannot be trusted. Please check the Cryptographic Services are enabled and the cab file is the certificate is valid. "I can confirm that the assistance service is running without any problems. I use Windows 8. Can someone help me out here?

  Hello

  I would try just to download the redistributable components Package and install it and then...

  http://www.Microsoft.com/en-us/download/confirmation.aspx?ID=8109

• End-user Runtime Web install DirectX

  I can't find a good link to download the DirectX end-user Runtime Web Installer.

  All the links I find it redirect me to the download page of Windows 10.

  I to d3dx9_39.dll error, and all the time after I download and install DirectX end-user Runtime Web Installer , the problem disappeared.

  You can simply re - install your driver video and who will be re - install directX

• Setup of DirectX end-user Runtime Web will not install.

  He said that there is an internal error whenever I try to install it. I have download right starting from Microsoft Download center. I need this for some programs to work on my computer. Please help ASAP!

  Hello

  1 did you change on your computer?

  2 are. what program you referring?

  3. What is the exact error message you received?

  Method 1:

  I suggest to perform the clean boot and try to install.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  End-user Runtime Web install DirectX

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=35

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to follow the link and check.

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Method 3:

  I also suggest you to follow the link and check.

  Diagnosing basic problems with DirectX

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-basic-problems-with-DirectX

  Method 4:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Critical failure DirectX - DXDiag shows no problem, used for end-user TIME, nothing works.

  Without apparent reason, Direct X has suddenly stopped working. I can't play Solitaire or the Sims 2. I followed the previous advice on this issue, and with the help of dxdiag shows no problem, reinstall he didn't help not, using the runtime for the end-user to install thing older DX 9 stuff told me that everything is up to date, I am at a total loss.

  I am running Win 7 Home Premium and everything I have running is Firefox, GIMP, and Skype. I searched for nothing 'media center' as I've heard it's a question and nothing like running. I don't know what to do.

  There are two DirectX install 'things'.

  It looks like you were using the Installer Web of DirectX, which is an update of DirectX.

  The update only installs the DirectX 'missing' files and does not overwrite the existing DirectX files.

  which is what is needed if a DirectX file or files is damaged.

  -It may be that your error is the result of corrupted files. It happens from time to time. Sometimes because

  a game or other software borks DX format when it insists on the installation of DX again for you.

  The DirectX Redist (June 2010) below to replace all DirectX files.

  When you run the installer it will ask you where you want to save the downloaded installation program then

  "unpacks" the installation of DirectX in the selected folder.

  After unpacking, open that folder and locate the DXSETUP.exe. This will reinstall DirectX, and

  should at least eliminate corrupt files DX as the source of the error.

  (You can delete the installation folder after installation).

  Download details - Microsoft Download Center - DirectX Redist (June 2010)

  -Have you installed anything new? Updated graphics drivers, game, Skype, Firefox Add - o

• Error during installation of DirectX using "DirectX end-user Runtime Web install":

  I get an error when trying to install DirectX end-user Runtime is

  http://http :// www.microsoft.com/en-us/download/confirmation.aspx?id=8109

  I can open and run initially, but aftersometime it shows as follows

  "A necessary installation .cab file cannot be trusted.please check Cryptographic Services are enabled and the cab file is the certificate is valid"...

  And then it closes...

  what I can do about it... pls tell a quick fix you can... In the hope of a good solution...

  Try one of the posts here

• Web site service Canada at the request of birth certificate access advised to download adobe reader. Which I finished but now has informed that I must accept the end user license which was not part of the load down. LOA tried to re down load but already a

  My apologies, this is my first attempt to ask for help.

  In trying to gain access to the application for a certificate of birth on the site Web of Service Canada, they advised me to download adobe reader, I finished. However, recommended site then I had to start reader & accept end user license. It was not part of the download, appears I missed this step. Impossible to find where to accept them & when I tried to re download advised already loaded.

  Please tell us how to complete the acceptance of license, if I can use the product. Thank you.

  Did you launch Adobe Reader?

• How can I make a top layer "transparent" for the end user?

  Hi guys,.

  You have a quick question.

  I am working on a custom map generator and I was wondering if there was any way I could keep a downloaded image editable to the end user. The end user will be able to choose which model they want to frame the picture with. The problem is, even with transparency that chose the framework acts as a layer, and once the uploaded image was placed on the area of transit, end-user lose the ability to change/scale/tilt this image. I want them to still be able to do this even with the model over their image.

  Can anyone think of a solution to this? All tips are greatly appreciated.

  You literally chop each image. To keep things reasonable update you can use Photoshop to slice the graphics, save to the external png to import into. If a picture has 4 edges, you cut out the 4 sides, import into Flash and put back together within a single Sprite or MovieClip. Any area within this sprite who does not object real is real transparency and won't call a click action.

  Don't forget, the hitboxes are rectangular. If you have an oval frame where the edges are asking you to create images with transparency on their edges, which will be clickable. If you don't immediately understand what I mean by this draw randomly just a circle in flash, convert to the clip. Now draw your cursor around what we consider the part 'top' of this frame and note how many inside you also complete capture at the same time. That will all be clickable. So that the user can 'see' their picture behind the frame, but when they click they accidentally get the framework in place.

  Picture is worth a thousand words (sharp image at random):

  

  If you cut the oval frame into 4 pieces (it's the top of course), the transparent area, you see in the picture will be part of the hitarea for the frame. This can be just as confusing to customers in this situation. If most of your managers have little or no transparency (very square upwards) so it will be not a problem. Just like the problem you are having now, no bitmap transparency will be clickable, even if you cut the sides to the top. The Center where there is no bitmap cannot be clicked through to mess with the photo behind the frame.

  So, this makes it a little more desirable transparency detection.

• y at - it end users in a place can give suggestions on the improvement of firefox?

  I was wondering if there is a place in the forum that accepts suggestions from end users who would greatly improve the use of firefox?

  My suggestion is related to the customization of the browser layout.

  It would be nice if we could put "breaks" in the bars going across the top and bottom,  so that when we add one of the shortcut icons, they don't all bunch up on the left side of the browser.
  

  For example put privacy related icons on the left, all the navigation icons in the Middle, and all the icons on the right side cat. In this way they are not all grouped on the left is a small area.

  So it is easier to see related to the security of information while not being not distracted by chat associated icons for example who are concentrated on the right next to him.

  This is a very good example of what I mean of the VLC interface customization.
  http://www.VLC-Player-download.com/VLC/interface-customization.html

  Note the "<>-" having said space put here between the control icons.

  Maybe it's all what you need is a square that is empty without an icon that can be placed on several occasions to give the user control is how much space between the control icons.

  I think that doing it this way would be to minimize the necessary coding is what I guess you need the new block of part blank icon "repetitive".
  Letter O is the white block the other letter first lefter control icon.
  Example: S-A-G-O-O-O-O-O-O-D-T-O-O-O-O-O-C-V-R
  see how the letters of control are now spaced with empty "O" between the two?
  Now, when I'm looking at the security related control icons on the left I have not D, T, C, V, R distract me from S, A, G.

  enough said
  frugal

  In the old days, there were separators and flexible spaces (used to separate the icons aligned to the right and left, not sure about centering), but Firefox 29 and above do not have those.

  Users who need those back could now try the customizer of UI multi-purpose Classic theme restaurant owner (https://addons.mozilla.org/firefox/ad.../classicthemerestorer/). It might be overkill, however.

  To submit suggestions of functionality that you can use either:

  • Firefox Help menu > submit your comments
  • https://input.Mozilla.org/feedback

  This forum is not well suited to this function.