Duration of the legend of failure in drag / move (Captivate 8)

Similar Questions

• Drag and drop the legend of failure time

  Hello

  I did a Drag and Drop in captivate 8.

  I want to keep the legend of failure more visible.

  Is it possible to increase the time of the legend of failure?

  Thank you

  Select the legend of failure and change "timing" in synchronization properties panel:

  

• Duration of the legend of success

  Hi all

  I use Adobe Captivate 9 and have created a SmartShape (with image fill) and use it as a button to display help information when the user clicks the button. The button is not together at the break after x seconds and is programmed to display the rest of the slide.  There are a number of these buttons on each screen, providing help information to help users in their work their way around a demonstration of the system I taped.  The final output should be available for iPADs, so why I have not used bearings.

  Is anyway to change the duration of the legend of the success of default value of 3 seconds?  I watched change preferences; Default values; Object by default; SmartShape and changed the style I use duration of 3 seconds, but does not work.  Also sought the Manager object of Style for the style of intelligent form, I don't see anywhere to change the duration.

  Is it hardcoded in Captivate?  Is there anyway I can get the duration and change?

  Any help gratefully received!

  Do not worry!

  It solved!

  All I had to do was right click on the legend of success and select restore the text caption in the Menu, and then change the duration of the text caption to 10 seconds (for example) on the timing tab.  Note that the text of the caption does not appear on your timeline

• Audio on the legend of failure

  Using Captivate 8, on a quiz slide, there is a legend of the failure. When the legend of the failure appears it must play an audio file.

  Here are the steps I did: choose the legend of failure. Then you click on the Audio menu, and then choose Import to > object.

  When I look at the advanced audio management, audio object is listed as it should. However, when previewing the project, by incorrectly answering the questionnaire slide and pressing the Submit button, the legend of the failure appears but plays the audio.

  Y at - it a trick to make the audio playback when appears the legend of failure?

  I can confirm that this is a problem in Captivate 8 but not in Captivate 9.

  But it will certainly NOT to get fixed or patched in Cp8 Cp9 now than is currently available.

• More stuck small simulation on larger project. Can't see the legends of failure

  I pasted a number of smaller blades explaining how to run a process step by step on a project wide (by using a blank slide for the latter), but I do not see the legends of failure for click boxes. However, I see the "tips" popping up. Any suggestions as to why I see a kind of legend, and not the other?

  I forgot, but now I see, you're on CP7, right? Any of the forms on the slide is interactive (button)?

  Could you try to copy a blank slide from another project, that has a theme that do not spoil the slide blank? I suspect it has to do with this model of slides, indeed.

  I still don't understand why you do simulations in another resolution. With this workflow, I understand, but you're talking about copy/paste?

  Create and use a Master blade 'Knockout' - Captivate blog

• Insert the video on the legend of failure in training mode

  Dear all,

  I'm working on a project I need to insert a video on the legend of failure in training mode in Adobe Captivate 6

  In other words, I used simulation software to produce the output I want

  So by default in training mode, a text caption is displayed in case of failure (when the user clicks outside the click box)

  What I want to do is remove the area of failure of legend text and instead of him put out a video with extension (.mp4) [or any other format I can code what is fine for me]

  Suggestions, how can I do this?

  Thank you

  Thread is marked still unanswered. Especially if you come to the forum that I visit only the threads not responded.

• How to stop the slide for the duration of the legend? How make it slow down a notch?

  Hi, I am very new to Captivate, but I can only borrow for tonight so please help.

  I captured a video with Captivate and now I have to add a few legends. But the video is short, so I want to slow it down a bit in some areas (if possible) and I would also like to pause the video during the duration of the legend. So it would be similar to adding breaks for captions.

  Is this possible? How?

  I could be wrong, but you save Full Motion? When you add text captions, the duration of this legend is determined by CP took into account the amount of text to read. In the timeline panel, you will see the duration (time), captions, you can always adjust by changing the properties of this legend, in the sheet "Options". If you want the legend to stay until the user clicks, you will need to a button or a box click to trigger the slide to continue. In this case, you can also change the calendar of the legend of text 'for the rest of the slide.

  Moreover, you can always download a full version of Captivate work and use it free for a month.

• Assessment of the legends of failure in Captivate 9

  With regard to the registration of a new Simulation software > assessment Cap 9:

  I enabled Edit > Preferences > record Modes > assessment Simulation > click boxes > failure Caption

  When I record an assessment, however, it inserts failure of forms instead of legends of the failure.  It's embarrassing because I can't use ("tails") legend options that are available with legend styles to point to a very specific place on the screen.  Is to generate captions of failure instead of forms like in Cape 7 anyway?

  Thank you

  The forms are much more flexible than the legends, you can even move the "tail" of the forms of the legend.

  But it's your choice: for the demo mode, you can override the global setting in preferences, default values (to the CP9, default value is forms instead of legends) under record Modes. This isn't the case for the assessment that follows the global setting in preferences, default values. Legends of failure never will, however, have a tail, not as a form, and not as legend. As you choose a 'tail' to the legends version, you can also change to such a version of forms (form of replacement), even with more possibilities for the 'shape' of this form.

  Preferences apply only to new simulations. If you want to convert existing slides, use the context menu, return to the text of the legend.

• Does anyone have a resolution for the legends of failure box click works does not after publication in Captivate 7?

  The legends of the insufficiency of work during preview, but not when the file is published. I have read other entries in the forums and I tried to remove the captions and add it again, made sure the click box is at the top of the timeline and tried different. I have the number of attempts the infinite value, that I know has been a problem in previous versions, but I have another project where these settings are working.

  Any resolution would be greatly appreciated!

  Are you still on CP6, exit right SWF?

  In this case: a box of big click under the box click on the green button (same point of suspension) and use the action of the success of this big box click to give the failure message.

• Legend of failure to replace the caption text

  Hello

  How would I be able to achieve the following in Captivate 5:

  Location:

  I have an image, a clickbox on it and a text caption requiring the learner to click the clickbox. If someone clicks on the clickbox, a legend of the failure appears.

  I'm looking for:

  Currently, the legend of failure shows for the duration of the slide (3 seconds), then he disappears and returns to the text caption. However, I want the legend of failure to replace the text of the caption completely.

  Can anyone advise me on what I should do?

  Thank you!!

  Hello BettinaK,

  Welcome to the Adobe forums.

  You can set the timing for the legend text in its properties lets say 3 seconds. After 3 seconds, it will disappear.

  Now if the user clicks the clickbox, you will get 'type text of failure here', you can click on it and set the ignition for it, like the rest of the slide.

  Here are the screenshots

  Step 1 > your slide is something like this (I'm sorry to not use any image of the slide)

  

  Step 2 > now you can set the timing for the text of the legend (click here). Here I put it for only 3 seconds, so it will disappear after 3 seconds

  

  Step 3 > now click on 'Failure Type here text' and adjust the ignition in his properties as well

  

  By doin this failure of Type here text appears for the duration that you want and it will take the place of the legend text

  I hope that helps!

  Vishal

• How to apply/generalize the same text of failure in all Failure_Caption in the project in order to avoid manually change in each legend of failure?

  How to apply/generalize the same text of failure in all Failure_Caption in the project in order to avoid manually change in each legend of failure?

  For example the 'wrong' text in all the legend of failure

  You can set the default text that appears in all the legends of failure for the quiz via the parameters for the Quiz questions.  However, after you have made changes here that will affect quiz slides that you add AFTER that, change.  There is no way to change the text in all the legends of defect EXISTING at the same time.  You will have to select each one and replace the current text manually.  If you firmly believe that you will need to do this more than once, you might consider using a user Variable that displays as the value in the legends of the failure.  Then you can edit them while changing just the value of the user variable.

• Success and failure with Drag 'n Drop

  Drag n Drop works quite well, but I cannot understand how "Display success - failure - index" in this interaction

  Drop n Drag - Actions - I checked the legend of failure that works well. Also cancel and reset buttons work well.

  Impossible to get a button of success who says well done continue.

  The best I've done is 'Success here Type text' box appear in the presentation when you click on the page - to any random combination.

  Anyone had success or advice how to combine the button quiz success in drag n drop?

  appreciate advice

  Captivate 8 (new user)

  Check: advice & glide - Captivate blog

• Legend of failure and legends Hint

  When I record in Captivate 4 on Windows XP, the legend of failure or hint captions do not display upwards.  It also does not show my mouse movements.  I tried to change the settings and options, but nothing seems to work.  Any help is appreciated!

  Hi again

  When you click on Simulation software, you have a few options. Demonstration, evaluation and Simulation of training Simulation. Demo mode will only provide the movements of the mouse. Only Simulation modes offer the legends of suspicion. FMR will enable the registration of the mouse, but you can't later to change.

  In regards to the legends of the trick, SEE it only actually once that you have saved in simulation mode and reading in a preview or output has published. The indicator shows when you hover over the image map.

  Does that help?

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• How to change the duration of the clip in Movie maker

  Im trying to use windows movie maker. does anyone know how to change the duration of the clip. I made a movie of my meetings previous families, but it is different duration time. I'm still doing, help menu does not explain.

  I tried different methods to change the time on the tag's options, but it does not change the duration of the clips

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Rickysbiz,

  You can try to cut the clip and take a fresh start or endpoint for the clip to set the duration. The start trim point determines when the clip will start playing, and the end trim point determines when the clip stops in your project and final film.

  To trim a video clip

  1. If you are in the Storyboard view, click, and then on the timeline.

  2. in the timeline panel, click the clip you want to cut.

  3 use the controls to play under the preview monitor to find the point where you want to cut out the clip.

  4 follow these steps:

  ·        When the playback indicator is at the location where you want the video or audio clip selected in replay, clickClip and then click TrimBeginning.

  ·        When the playback indicator is at the location where you want the video or audio clip selected to stop playback, clickClip, and then click TrimEnd.

  You can access the link below to learn more about wrking with clips in Windows Movie maker.

  http://Windows.Microsoft.com/en-us/Windows-Vista/work-with-clips-in-Windows-Movie-Maker

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Drag / move - how to reset the feedback?

  Hello

  I have a drag and drop into a slide (Captivate 7).

  Problem: I need your feedback an interaction drag-and - drop is reset whenever the learner back to the slide / move later.

  Background: Learners complete the drag / move and gets feedback "Correct!" or "Incorrect". The learner then continues the lesson on the way to the next slide. The problem is that, if the learner is returned for drag / move, 'Okay!' or 'Wrong' feedback still shows that the drag source items are reset to their original locations and the learner can repeat the interaction drag-and - drop. By clicking on the button "Reset" does not remove the existing 'Correct '! or feedback "incorrect." Even if the learner restores the interaction and the opposite effect (for example if the learner is wrong the first time, but then correct themselves the second time), the existing comments don't change e.g. 'Wrong' to 'correct '.

  Any ideas on how to solve this problem?

  Thank you!

  It worked!

  I had to also run the tip at the entrance Action, not just at the exit. Weird, but hey, it worked!

  see you soon