During installation - I get the error "file name too long."

Similar Questions

• I come from components to build a new computer. Try to use the Windows XP Pro computer old version but after BIOS and XP installation I get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. "What should I do?

  New components is a new computer.
  Inserted the XP Pro CD in the drive but get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. »
  Rebooted comp 5 times with the same problem after BIOS.

  Hi Milkshake83,

  Thanks for posting. Proceed as follows for this error.

  Method 1: Restore the default settings of the BIOS WARNING: this procedure may involve changing the semiconductor (CMOS) settings of the computer's complementary metal oxide and by changing the BIOS of the computer. Incorrect changes to the BIOS of your computer can result in serious problems. Change the CMOS settings of the computer at your own risk.

  To resolve this issue, restore the BIOS of the computer to its default settings. For more information about the correct settings of the BIOS of the computer and how to check and change these settings, see the computer documentation or contact the manufacturer of the computer.

  In addition, to confirm that the computer's BIOS is current, contact the computer manufacturer to inquire about the last update of the BIOS available for the computer.

  Back to top

  Method 2: Remove the faulty RAM to resolve this issue, remove the memory modules installed in the computer.

  NOTE: you must leave enough RAM for the computer to start and run Windows.

  For more information on the amount of RAM that is required to run Windows, click on the number below to view the article in the Microsoft Knowledge Base:

  304297 configuration (http://support.microsoft.com/kb/304297/) System requirements for Microsoft Windows 2000 operating systems

  If the error message described in the "Symptoms" section of this article appears again after removing the memory module, remove a different memory module. This procedure may ask you to restart your computer several times to identify the specific memory module that is not working properly.

  For more information about how to add and remove RAM to the computer, contact the manufacturer of your computer or see the documentation that came with your computer.

  http://support.Microsoft.com/kb/318729

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• When you back up my files to a new hard drive, getting the error "destination path too long".

  Hello

  Today I was backing up my files on a new hard drive that I bought a week ago, and during the copy, I received the message following 'destination path too long ".
  And the file name is actually short "crouch" here is a snap of the image:

  http://imgkeep.com/0ij23kby74dn.html

  I don't know what to do!

  Original title: destination path too long?

  The key factor is not the name of the file itself, but the total length of the file name and the path of the folder.

  The help files for the application that you are using could tell you how long the total combination of the file-file may be [some more older can be limited to 255 characters, but I was not able to discover the current constraints].

• I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup can not continue "when you try to reload windows xp on a computer problem. What should I do?

  I'm trying to "sweep" and reinstall windows XP pro on a computer that has had problems. I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup cannot continue to press a button to exit "as soon as I got the boot from the cd (and actually after a long break). Help, please!

  Hello

   
  Try the steps listed in the link below and check if it helps:

  "Ntkrnlmp.exe could not be loaded. The error Code is 7 "Error Message occurs during installation of Windows: http://support.microsoft.com/kb/318729

• Upgrade Windows xp to Windows 7 Professional. During installation I got the error code 0 x 80070005. Solution?

  error code 0x80070005

  Upgrade Windows xp to Windows 7 Professional. During installation I got the error code 0 x 80070005. Solution?

  How to troubleshoot the error codes Activation Volume Windows 7, Windows Server 2008 and on Windows Vista computers
  http://support.Microsoft.com/kb/938450

  Error code 0x80070005

  Symptom
  When you try to use a KMS host, a KMS client, or a MAK to activate one or more computers, you may receive the following error message:

  0x80070005
  Access denied that the requested action requires elevated privileges.

  Cause
  This problem occurs if the user (UAC) access control does not allow activation of process run in a not high command prompt.
  Workaround
  To work around this problem, follow these steps:

  1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as.
  2. click on the next user and then select Administrator in the user name list.
  3. click on OK.
  4. at a command prompt, type the following command and press the "Enter" key: slmgr.vbs

  J W Stuart: http://www.pagestart.com

• After you download CC Office at the beginning of the installation, I get the error 049. It was the 9th try to install for 1 week - with and without administrative rights.

  After you download CC Office at the beginning of the installation, I get the error 049. It was the 9th try to install for 1 week - with and without administrative rights.

  Hello

  Please see error download or update Adobe Creative Cloud applications

  Hope that helps!

  Kind regards

  Sheena

• Why do I get the error invalid name anchor in muse adobe

  Why do I get the error invalid name anchor in muse adobe

  has responded to your other Candran.

  Why do I get the name of the invalid anchor in muse adobe

• I download the trial version Criative cloud, and during installation pops up the error 201, what's the problem?

  I download the trial version Criative cloud, and during installation pops up the error 201, what's the problem?

  Hello Michelle,.

  Please see the links below:

  Error download or update Adobe Creative Cloud applications

  Error 201

  Download Creative Cloud - error 201

  It will be useful.

  Concerning

  Bianka Attre

• "File Name Too Long" when copying files on USB using Windows 7 Home Premium (64-bit)

  When I copy about 60 GB of library files in a backup folder on a USB key, at the end of the copy, it is a dialog box indicating "file name too Long for the Destination Folder.  It shows that there are 62 records like that, and I can choose to ignore these files.

  1. I had formatted the USB stick to NTFS - which does not allow large file names?

  2. How can I see which files have this problem so I can shorten the file names?

  Thank you!

  Hello

  What is the capacity of the USB?

  Were you able to copy before?

  Try to format the drive once and then try and check if it is beneficial because it can also happen when there are viruses.

  You can also check the drive for errors.

  Here is the link:

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  It will be useful.

• Cannot read CDs/DVDs, get the error "file does not have a program associated with it for this task" under XP

  Cannot read a cd or dvd to print

  Hi WayneMarkland,

  ·         What happens when you try to play an audio CD?

  ·         How do you print DVDs?

  ·         When exactly do you get the error message?

  I suggest trying the Microsoft Fixit and/or manual steps from the following links and check if it helps:

  Diagnose and repair Windows files and folders problems automatically

  You receive an error message when you try to start a program that has the an.exe file name extension

  How to change or choose the program that starts when you double-click a file in Windows XP

  I hope this helps.

• When trying to download or update msi programs and it's got to the part of the installation, I get the Error 1606 could not access network location % APPDATA%\. This only happens with programs of msi.

  This only happens with programs of msi.  I used the fixit for me solution and it does not solve my problem and I'm afraid to mess with the registry.  What can I do now?  I am running Vista Home Premium.  I don't know exactly what details you want.  Just ask and I'll try to provide answers.

  Sorry to take so long to get back to you - but I have tried different things to try to solve my problem.

  I was able to upgrade Silverlight without problem.  But failed to update Adobe Reader or Java.

  I ran the Microsoft fixit to resolve the Error 1606.  These are the 50356 fixit.   Microsoft help page says:

  "This problem can occur if there is an incorrect setting in one of the following registry subkeys:"

  • HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"

  It did not work.  I went to the support page that you recommended and ran the fixit there - and who did not.

  Then I noticed that this fixit 50356 mentions 'current user' - so I tried to change my standard account to an administrator account.  It basically gave me two administrator accounts.  (I already had a separate administrator account and was simply put the password so that it will prompt to update Java and Adobe.)   Then I tried to update Adobe Reader by using the new administrator (officially a standard account) and had no problem!  Then, of course, the problem has been to my administrator account.

  I'm guessing that the Microsoft fixit didn't work is because I was on the internet using my standard account, not my administrator account.  So, it 'fixed' my standard account, that does not need fixing.  I can't connect to the internet using my administrator account, unless it is necessary.

  It would be useful that the Microsoft help page has explained that the problem is probably in the administrator user account that is used to download and upgrade programs, that the fixit solution that they recommended would fix the problems only on that account, and I had to log on that account, connect to the internet and then running the fixit.  But it doesn't work.  It just says: If you get the Error 1606, run this fixit.

  I changed my new manager at standard and I'll connect to my normal administrator account and run the fixit from here.  If this is the problem with this account, I will be setting up a new administrator user account and delete it.

  Thank you very much for taking the time to try to help me.  People like me who do not know much about computers need people like you to help us!

• File name too long in Microsoft Excel 2008?

  I have Microsoft Office 2008 for Mac and I'm a big user of Excel.  Often, I receive an error message indicating that the file path that I specify when you create a new file is too long.  I am convinced that earlier versions of Mac OS x did not produce this error, or at least worked better.  I'm 10.11.4, OSX but I suffered with this problem for some time.  I read other reviews, stating that there may be a limit of 259 characters for the file name and path.

  My question: can someone tell me if this path length limitation has been removed or the less liberalised in the latest version of Excel?  Should an upgrade just to get rid of this nasty problem.

  Thank you...

  You can also post the question in the Microsoft Office for Mac 2016 forum: http://answers.microsoft.com/en-us/mac/forum/macoffice2016?auth=1

• When you use the copy and collect the files to the new location, I get the error file not found...

  I have 24 hours to media manage and send a feature-length documentary online instead. Everything is ready to go and so I'm going in the media project manager manage all this and I get the following error message:

  

  This is meaningless - why he's looking for the file that it is the copy in the destination folder? The file in question is not in offline mode, it is bound to correctly in the project file and reads without problems. I also tried manually copying the file in the destination folder to see if it changes anything, but no luck.

  I would like ideas, that anyone could have!

  Thank you!

  -Michael

  It seems that because the name of the file was a '-' in there. I changed the name of the file and then reconnected and it has been working fine since.

• How to get the current file name and & or path

  How can I get the current path or the file name?

  I have really found the answers in the net. This.Path or app.path have been proposed, but I couldn't make it work.

  Thanks in advance for your answer!

  LiveCycle Designer ARE 8.2.1.3144.1.471865

  Hello

  event.target.path.toString ();  will give the full path, including the file name.

  event.target.documentFileName.toString ();  will give the file name only.

  Good luck

  Niall

• Empire Total War installation and getting the error message "steam exe (main exception).

  I just bought a new laptop Assus with Windows 7 and bought the DVD Empire Total War.  I put in disc 1 and click on install.  He loads the updates and the steam but then stops and gives me the error message steam.exe (main execption) unable to load library Steam. DLL. I click OK and then install any more.  I have de-installed Steam, Steam sent a request for help, got another way to install the Internet, created a Steam user ID and password... Yet, it is still impossible to load the library. Can someone help me? I want fair paly this game and I am ready to kill people to steam.  Please tell me an easy way to install this game so I can play?

  Try to use a hard - wire to your router configuration and see if that helps.