during synchronous operation of loop

I created a vi where he must acqire data over ethernet in parallel (using two while loop) and display this data. but I m unable to do because the two loops are not running simultaneously. Someone please help me. VI is attached

Of course, they do not work in parallel. You do not understand the basis of LabVIEW paradigm - stream. You forced the upper loop of execution after the bottom loop because you wired controls into the loop at the bottom of the loop at the top of the page.

Tags: NI Software

Similar Questions

  • Change STP UME in RSTP mode on two stacked powerconnect 6224 configured for iSCSI during normal operation

    Hello

    I'll do a fw upgrade during normal operation on a stack of 6224 circulating BPMH, I am currently aware of recommendations Dells run RSTP on switches configured for iSCSI traffic connected to Equallogic SAN.

    I intend to set up another pile with two 6224 to failover and then perform the upgrade on the stack of "old." My question is if it's possible to run BPMH on the 'old' stack RSTP executing on the new stack when LAG is configured between the two batteries?

    Another option would be if it is possible to reconfigure the 'old' UME to RSTP stack without interruption between the hosts and the SAN first?

    Guidance on this subject would be greatly appreciated

    Cree

    Multiple Spanning Tree Protocol is based on RSTP and is backward compatible with

    RSTP and STP. So, you should be able to run BPMH on the old and RSTP on the new.

  • The web page freezes several times during the operation, recovers after about 3-20 minutes, freezes again. Also, lately, the screen lights up and sparkles in a pink/purple color

    I use Internet Explorer as my search engine and internet as my default msn.ca. The web page freezes several times during the operation, recovers after about 3-20 minutes, freezes again. Also, lately, the screen lights up and flashes in a pink/purple one color recovers to normal in 30 seconds approximately. I had an attempt of technician paid for help but couldn't. Can anyone help? Thank you

    Go to start / Control Panel / Internet Options / Advanced section then check the top box rendered = software use instead of gpu rendering / apply then OK.

    Restart all open windows ie11.

    For memory, Bing is a search engine ie11 is a browser and msn... is a home page.

    Any other number symbol use Gear and manage add-ons and toolbars and extensions and disable Adobe Shockwave element

  • "The Bank bank of Baroda" site said during the operation 'Java script disabled', but is enabled in preferences > content > enable java script. Help, please

    I use linux (ubunut 10.04). My operation is not complete, during the transaction, the site of the Bank says 'java script disabled', but in edition > Preferences > content > enable java is marked as a control. So, what's the problem? , But this site is running in Windows XP internet explore.

    URL of affected sites

    https://www.bobibanking.com/BankAwayRetail/%28S%28cyyknx5510ur3d55gfjnfpbt%29%29/Web/L001/retail/JSP/user/RetailSignOn.aspx?RequestId=40497583

    you have the Options JavaScript, JavaScript Debugger, JavaScript Deobfuscator NoScript and installed QuickJava.

    Is it possible that one or several are at the origin of the problem?
    Do you know how to use these points?
    U of tried to turn all these OFF, restart FF, visit the site and see if it works?

  • Loading screen is not animated, during the operation, but after

    Hi all!

    Here's my problem: I am display a gif animated using the class presented here.

    It is used in a specific class loader that perform an action, while the gif is displayed (the gif is a spinner). Only once the operation is completed, the LoadingScreen came out of the screen.

    Here's my class loader:

    public class LoadingScreen extends MainScreen {
    
        /**
         * The action to be processed during the loading.
         */
        Runnable action = null;
    
        private AnimatedGIFField _image;
    
        /**
         * Default constructor.
         *
         * @param action the action to manage.
         */
        public LoadingScreen(Runnable action)
        {
            super(FIELD_VCENTER);
            this.setTitle(CommonTools.initTitleBar());
            this.action = action;
    
            displayAnimation();
    
            if(this.action != null)
            {
                UiApplication.getUiApplication().invokeLater(this.action);
            }
        }
    
        /**
         * Display the animation during the loading process.
         */
        private void displayAnimation()
        {
            EncodedImage encImg =
                GIFEncodedImage.getEncodedImageResource("loading.gif");
            GIFEncodedImage img = (GIFEncodedImage) encImg;
    
            _image = new AnimatedGIFField(img);
    
            getMainManager().setBackground(BackgroundFactory.createSolidBackground(Color.BLACK));
    
            LabelField label = new LabelField("Connect..."){
                public void paint(Graphics g)
                {
                    g.setColor(Color.WHITE);
                    super.paint(g);
                    }
            };
    
            HorizontalFieldManager containerSpin = new HorizontalFieldManager(FIELD_HCENTER);
            HorizontalFieldManager containerLabel = new HorizontalFieldManager(FIELD_HCENTER);
            containerSpin.add(_image);
            containerLabel.add(label);
    
            containerSpin.setPadding(Display.getHeight()>>2, 0, 0, 0);
    
            this.add(containerSpin);
            this.add(containerLabel);
    
            KasualApplication.isLoading = true;
        }
    }
    

    The problem is that the gif is not animated, while the action runs. But if I have a popup appears at the end of the action to let the loading screen, I see that the gif is animated. As well as the animation starts when the action is complete.

    I think something is wrong in the clock of my son, but I don't see that.

    Could you please help me?

    Thanks in advance.

    It's ok, the solution is described here.

  • There are errors during the operation of sanitation

    What started as a quick and easy update turned into a mess. I wanted to update my host esx 3 lab. The first host was a running iSCSI device and the three hosts connect to this target. Now, I forgot first well remove the target on the three hosts. So when I stop this unit the three hosts lost their target and froze. The article KB 1016291 talks about this behavior and I was about to be updated because of this hotfix

    Now, since the first host was trying to go into maintenance mode, but never did, I had to kill the virtual and also rebooted the host machine. Now it seems I broke Update Manager. When I try to remedy or organize one of the three hosts, I immediately get an error: "There are errors during the clean-up operation".

    On the vCenter server, I checked the logs in C:\Users\All Users\VMware\VMware Manager\Logs update but I can't find no manifest error. However, I give some log files that has changed today.

    At this point I don't know where to look now. Restarted host, restart services, etc, etc..

    Any help is appreciated.

    Gabrié



    http://www.GabesVirtualWorld.com

    Check the var/log/vmware/esxupdate.log. Probably, you will find information more useful.

    Marcelo Soares

    VMWare Certified Professional 310/410

    Technical Support Engineer

    Globant Argentina

    Review the allocation of points for "useful" or "right" answers.

  • How to pre-fill the user information during the operation to assign tasks

    Hello

    I have a requrirement to pre-fill fields of the form (name, Email, phone etc) when a task is assigned to a user. Users are dynamically specified, so I use the user to find and services to assign tasks to locate and assign them to the user. Since I was a user variable that is the result of the operation of the user to find, I was hoping to get the user information with the attributes of the type of user.

    I tried to use the service to set the value to set the form field (Email) with the email of the user that is object type attribute

    / process_data/MyForm/Object/Data/XDP/datasets/Data/Form/User/email-> /process_data/facilityAuthority/object/@email

    However I get the following error when I try to do - com.adobe.idp.dsc.util.InvalidCoercionException: can not compel object: [B@335d of the type: [B type: interface org.w3c.dom.Document.]]

    Is it possible to retrieve information from the user to the user object? If yes how values for the attributes of the user (name, Email and phone etc...) so that I can fill in the form?

    Thank you
    Nicolas

    Hello

    Please cast chain e-mail before you assign it.

    Example of

    / process_data/MyForm/Object/Data/XDP/datasets/Data/Form/User / email-> string (process_data/facilityAuthority/object/@email)

    For more details, please refer to the forum http://forums.adobe.com/thread/492826

    Thank you

  • How can I enter data apple fitness?  I swim and take aerobics classes.  I don't wear my Apple Watch during this operation.

    How can I enter data of fitness on my Apple Watch?  I swim and take water aerobics classes and not wear my watch in the water.

    Hello

    It is not currently possible to enter data of fitness on Apple Watch.

    Health and fitness data Apple Watch, iPhone and any other source are rather grouped by health on your iPhone app. Combined data is reflected in the health app charts (which can be added to the dashboard), which adjust the results to avoid any double counting of data from different sources.

    To add a workout that has not been registered by your watch, iPhone, or other existing data source:

    -On your iPhone, in the application of health (icon: red heart on a white background), go to: data on health (tab) > Fitness > training > add a data Point > enter the result of your workout.

    Activity types available when you add a workout currently including swimming, but do not include aerobics (other can be used instead).

  • HP 360: 360 HP - TAKE REAL TAKING THAT CRACK DURING NORMAL OPERATION - QUICK SOLUTION?

    Hello everyone.

    Does anyone else have this little question? We have a new printer HP 360. When the asple of winding turns, it creates a noise noisy squeaking intermittently. It seems to come mostly from the left side, and not on the right side where the main motor/control Assembly is at.

    It sounds as if there is a part that is either too tight, causing the sound * or * the metal part that "clique in" the left side to grease a bit? WD40? The coil works fine otherwise. Runs OK, no slow movement & no error on the printer.

    Thanks in advance to all. Look forward to some advice as appropriate.

    Love the printer otherwise! Runs like a champ.

    -TEAM WRAPIFY

    After a while, you will hear that noise on the side of the upper motor - I greased both sides (left and right side upper and lower) WD40 (or oil of cleaning kit that comes with 360) - but a drop of water, because your hands might get durty .

  • Closed during the operation "memory diagnostic tool"

    Using WINDOWS Vista HOME PREMIUM.

    When I run the 'memory diagnostic tool' the computer stops half way through the process.

    He stops at a different % of how the process every time.

    It also stops when I make a video file.

    The rest of the time it works OK.

    Can you suggest a reason or solution for this?

    Maybe it's overheating when you perform CPU intensive tasks. Check the dust accumulated around fans and heat sinks. A can of compressed gas can be used to remove items.

  • mouse and screen windows freeze-up during the operating mode normal ok in safe mode

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • re installed the OS, but the problem persists

    Hello

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    ----------------------------------------------------

    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    ===========================================

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ===========================================

    Refer to these discussions because many more excellent advice however don't forget to check your antivirus
    programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
    first.

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/GP/slow_windows_performance/en-us

    Performance and Maintenance Tips
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

    Explorer Windows stopped working
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

    Hope these helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • external hard drive "went missing" during normal operation

    I usually keep my computer running most of the time, turn off updates (as they charge for this), or because of a problem that I get with my external hard drive. Randomly, professional Vista continues to recognize its existence. The hard drive is still plugged in, turned, and so forth, but he claimed not to be there. It is not even appear on the window of my computer... It is starting to really bother me, as can happen when I fell asleep with my laptop for background noise (music) and music will leave just about me or when I'm working on a project in Photoshop, and I can't access my images to use.

    I can't just scrap what is on the disk hard to reformat, it's almost his TB limit and I don't have the space to save a lot more information on my intern.

    Hello

    I suggest you refer to the link below and run the fix it tool, or follow the steps provide to the manually to resolve the problem.

    Tips for solving problems with USB device

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

    You could also check the link provided below as device USB may not work correctly when Windows Vista comes out of standby or hibernation.

    http://support.Microsoft.com/kb/928631

  • BlackBerry Smartphones new Bishop Office stops abruptly during synchronizing of Outlook 2007 calendar

    As a * beep *, I improved something that worked perfectly.  I upgraded to BB Software v4.2 on my 8830 and updated the Desktop Manager to version 4.7.  Now, when I sync, it brings just a Vista dialog box that says that it has stopped working and Windows is looking for a solution (which she never finds).  I have tried everything, including closing the AV and the User Account Control (UAC) and the removal/relocation of the Office of Bishop.  I even tried to use computer Manager to change the drive letter.  The only thing that allows me to get through the synchronization is that if I called the timing of the device completely replaces the Outlook calendar, every time I sync.  This is unacceptable, because it means that I can never come from a calendar on Outlook event and I hope to synchronize it with my BB.   Aaaarghhh!

    Well, as a last effort, I blew most of my calendar events, and now the synchronization works.  Must have been a corrupted calendar event.  In any case, back to the task of reconstruction of my electronic calendar...

  • Clone Stamp does not work during the operation of frequency separation.

    Spacing of the frequencies for the first time by train.  I finished the layer of tone and now works on the texture, but the clone stamp does not work.  I have the linear light value layer and the stamp tool is set to 'active layer '.  The stamp tool is gray in the Middle, as if I were seeing a "high pass sharpening" layer through the center of it.  Tried to save the doc and the reopening, but none here.  Any other ideas?

    -Jeff

    In fact, I restarted Photoshop and it works properly now.  Thanks for the information on how to best to post a question.  I'll remember that next time!

  • type of data error during the operation on 11 G less

    Dear expert, can you please check the procedures to follow to see why I get below error
    Only difference in procedures is to 5.6,7 line numbers (fixed less query)
    Procedure a.
    -----------------
    sys @ > CREATE OR REPLACE PROCEDURE compare_schema (i_src_owner VARCHAR2, VARCHAR2 i_tgt_owner)
    2 AS v_count NUMBER;
    3 BEGIN
    4. SELECT COUNT (*) IN the v_count OF
    5 (SELECT table_name FROM all_tables owner WHERE = i_src_owner LESS SELECT table_name FROM all_tables owner WHERE = i_tgt_owner
    6 UNION ALL
    7 SELECT table_name FROM all_tables owner WHERE = i_tgt_owner LESS SELECT table_name FROM all_tables owner WHERE = i_src_owner);
    8 IF v_count > 0 THEN
    9 dbms_output.put_line ('-logical ');
    10. OTHER
    11 dbms_output.put_line (' '-OTHER logic ");
    12 END IF;
    13 END compare_schema;
    14.

    Created procedure.

    Elapsed time: 00:00:00.01

    Procedure B
    -----------------
    sys @ > CREATE OR REPLACE PROCEDURE compare_schema (i_src_owner VARCHAR2, VARCHAR2 i_tgt_owner)
    2 AS v_count NUMBER;
    3 BEGIN
    4. SELECT COUNT (*) IN the v_count OF
    5 (SELECT table_name FROM all_tables owner WHERE = i_src_owner LESS SELECT table_name FROM all_tables owner WHERE = i_tgt_owner)
    6 UNION ALL
    7 (SELECT table_name FROM all_tables owner WHERE = i_tgt_owner LESS SELECT table_name FROM all_tables owner WHERE = i_src_owner);
    8 IF v_count > 0 THEN
    9 dbms_output.put_line ('-logical ');
    10. OTHER
    11 dbms_output.put_line (' '-OTHER logic ");
    12 END IF;
    13 END compare_schema;
    14.

    CAUTION: Procedure created with compilation errors.

    Elapsed time: 00:00:00.02
    sys @ > view the error
    Errors in PROCEDURE COMPARE_SCHEMA:
    4/1 PL/SQL: statement ignored
    4/8 PL/SQL: ORA-01790: expression must have the same type of data as
    matching expression

    user507531 wrote:
    Dear expert, can you please check the procedures to follow to see why I get below error
    Only difference in procedures is to 5.6,7 line numbers (fixed less query)
    Procedure a.
    -----------------
    sys @ > CREATE OR REPLACE PROCEDURE compare_schema (i_src_owner VARCHAR2, VARCHAR2 i_tgt_owner)
    2 AS v_count NUMBER;
    3 BEGIN
    4. SELECT COUNT (*) IN the v_count OF
    5 (SELECT table_name FROM all_tables owner WHERE = i_src_owner LESS SELECT table_name FROM all_tables owner WHERE = i_tgt_owner
    6 UNION ALL
    7 SELECT table_name FROM all_tables owner WHERE = i_tgt_owner LESS SELECT table_name FROM all_tables owner WHERE = i_src_owner);
    8 IF v_count > 0 THEN
    9 dbms_output.put_line ('-logical ');
    10. OTHER
    11 dbms_output.put_line (' '-OTHER logic ");
    12 END IF;
    13 END compare_schema;
    14.

    Created procedure.

    Elapsed time: 00:00:00.01

    Procedure B
    -----------------
    sys @ > CREATE OR REPLACE PROCEDURE compare_schema (i_src_owner VARCHAR2, VARCHAR2 i_tgt_owner)
    2 AS v_count NUMBER;
    3 BEGIN
    4. SELECT COUNT (*) IN the v_count OF
    5 (SELECT table_name FROM all_tables owner WHERE = i_src_owner LESS SELECT table_name FROM all_tables owner WHERE = i_tgt_owner)
    6 UNION ALL
    7 (SELECT table_name FROM all_tables owner WHERE = i_tgt_owner LESS SELECT table_name FROM all_tables owner WHERE = i_src_owner);
    8 IF v_count > 0 THEN
    9 dbms_output.put_line ('-logical ');
    10. OTHER
    11 dbms_output.put_line (' '-OTHER logic ");
    12 END IF;
    13 END compare_schema;
    14.

    CAUTION: Procedure created with compilation errors.

    Elapsed time: 00:00:00.02
    sys @ > view the error
    Errors in PROCEDURE COMPARE_SCHEMA:
    4/1 PL/SQL: statement ignored
    4/8 PL/SQL: ORA-01790: expression must have the same type of data as
    matching expression

    Read it in the form

    select count(*)
      into v_count
      from (select table_name
              from all_tables
             where owner = i_src_owner
            minus
            select table_name
              from all_tables
             where owner = i_tgt_owner)
    
    union all
    
     (select table_name
        from all_tables
       where owner = i_tgt_owner
      minus
      select table_name
        from all_tables
       where owner = i_src_owner);
    

    Do you see it?

Maybe you are looking for