during the installation of licenced copy of windows 7 Home Premium - I can't write my username keyboard wired - num light is off - hoe to write?
I tried to install a licensed copy of windows 7 Home Premium 64 bit on C: or D:.
Up to write user name, all measures are gradually running & stops at 'write username. because I'm unable to write because of the keyboard NUMLOCK is off. When I press the num lock light button is "ON", when I release the finger of the num lock key light is disabled (unable to write with key board.
In contrast, windows 8 Pro gets comfortably installed on C: or D:. This means that the keyboard is ok.
What is the problem with the installation of windows 7 so that the keyboard is not recognized (active) while writing "user name".
Can you try to connect the keyboard to a different port and see if it works?
Turn off the system
It again, go into the BIOS and change USB legacy mode and see if it works.
Tags: Windows
Similar Questions
-
Copy of Windows 7 Home Premium has no valid license.
Bought a copy of Windows 7 Home Preium I believe at the time, he is out. Earlier this year, my computer died. When a friend he got all repaired them for me instead of using my own copy of Windows, he used a pirated copy of Windows 7 Ultimate. Hack broke and Windows complains of not being authentic. I find and install my copy of Windows 7 Home Premium on it, but he always complains about not being authentic, declaring inadmissible permit despite the use of the product key provided with the CD. A possible cause of this problem and the solutions that I can try?
Some things to note...
(1) you seem to have tried a WIndows repair install? -C' is the cause of the two file incompatibilities.
(2) the 0xc004c4ab error indicates that an operation of Activation is installed.
(3) a downgrade from Ultimate to Home Premium reuires a clean install.
(4) the validation breaks seem to complain about your system clock.
You must reformat and reinstall from the adequate support for your key (which seems to be valid) - an Activation exploit will tend to leave the system n a vulnerable state where its security is not guaranteed.
-
Problems accessing the HP Recovery Manager after the installation of new copy of Windows 7.
I have the HP Pavilion dv6 (2043us) originally with Windows 7 Home Premium. A recent storm crossed in my area, which seems to me to be the cause of a corrupt hard drive file that prevented Windows startup. My extra fathers using copy of Windows 7 Ultimate (is a prominent IT guy for his company, he has a lot to lose) I decided to install it from that rather than using the HP Recovery Manager in order to save my files (Windows Startup Repair and system restore failed, and to restore the default factory was not desirable) as I mentioned it because of my desire to save my documents) I have installed on the same partition as the original windows, allowing files to be viewed in Windows.old.
However, after all that, I came to the will to restore the default settings. However, after you press (esc) and (f11) to access the Recovery Manager, it is bring up the Windows Startup logo and the login screen. Is it possible to access the Recovery Manager and restore the default settings? If so, how should I do this? As I said, I left all the original parts intact, so I do not think it is possible after some research, but I'm not sure how to start the process.
This method to get the active recovery partition was first introduced to me by Cheryl here on the site. It may or may not work.
Right-click on computer and click Manage > search in the list on the left, and then open disk management. You should see the recovery partition it. Click right and whether it is active and the next time that you start it up, it should boot into the recovery partition and restore back to the factory.
-
I have a laptop with windows vista Home premium that I bought at a price of extortionist from a retailer, I had to reinstall because of some software that magically stoped working and so my computer crashing. Now Microsoft´s site says that my product key already exists (although I know because this is my product key) and he won´t consider. How can I get my original key work?
original title: valid Windows Vista product keyYou must use the Activate by phone and speak to an operator.
telephone activation.
Click the Start button
in the search box, type
SLUI 4
and press the Enter key
Follow the instructions - but when asked which service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you. -
Is there an upgrade to the full version if I have an Upgrade copy of Windows 7 Home Premium
I have a version of Windows 7 Home top Upgrade. Can I purchase an 'upgrade' to complete a full version of 7 Home Premium at a lower cost than buying a version from scratch?
You can purchase a full version, but it is not available at a reduced price:
Full version-
Microsoft Windows 7 Home Premium
What you can do is go back to your current license to upgrade to get a refund and buy the full version if it is what you need:
Refund:
http://www.Microsoft.com/Mac/trial
Items ordered from Microsoft Store online:
-
Acer 5517 - 'invalid copy' of Windows 7 Home Premium 64 - bit image factory after reinstall
You just bought an Acer 5517 second hand... the copy of Windows that was top was hacked...
so I found the image factory saved and reinstalled it..., but Windows gives me an error "invalid copy..."
the internal key factory should never spoil, right?Here are the details... thank you in advance for any help!
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - WJ2H8 - R6B6D-7QJB7
The Windows Product Key hash: ckKNc + BBPDWmo1LUlOkraNjlQ34 =
Windows product ID: 00359-OEM-8992687-00006
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.1.7600.2.00010300.0.0.003
ID: {D78683C4-E6D9-4367-9A79-AD8F685CD6F9} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Home Premium
Architecture: 0 x 00000009
Build lab: 7600.win7_rtm. 090713 1255
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 102
Microsoft Office Home and Student 2007-100 authentic
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_B4D0AA8B-920-80070057Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Internet Explorer\iexplore.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
[File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]Other data-->
Office details:{D78683C4-E6D9-4367-9A79-AD8F685CD6F9} 1.9.0027.0 6.1.7600.2.00010300.0.0.003 x 64 *-*-*-*-7QJB7 00359-OEM-8992687-00006 2 S-1-5-21-840722075-3706858346-4016605683 Acer Aspire 5517 Acer V1.08 20091020000000.000000 + 00012BB3607018400FE 0409 0409 Time(GMT-05:00) Standard is 0 3 HPQOEM SLIC-MPC 102 100 Microsoft Office home and Student 2007 12 19 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7600.16385Name: Windows 7 HomePremium edition
Description: operating system Windows - Windows (r) 7, channel OEM_SLP
Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00359-00178-926-800006-02-1033-7600.0000-0012001
Installation ID: 009670605843476656541915496230749981225934318134904663
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: 7QJB7
License status: initial grace period
Time remaining: 43200 minute (30 day (s))
Remaining Windows rearm count: 2
Time to trust: 2009-11-06 05:05:33Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Not registered - 0 x 80040154
The admin service: not registered - 0 x 80040154
Output beyond bitmask:--> HWID data
Current HWID of Hash: LgAAAAEAAgABAAEAAAABAAAAAgABAAEA6GFUSD62VPmgHnDSaDI0y/6osNh4qg ==Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20001
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC ACRSYS ACRPRDCT
FACP ACRSYS ACRPRDCT
HPET ACRSYS ACRPRDCT
START ACRSYS ACRPRDCT
MCFG ACRSYS ACRPRDCT
SLIC SLIC-MPC HPQOEM
SSDT AMD PowerNowI'm afraid that someone will end you in completely in the wrong direction on this. The recovery media is probably completely OK.
The HP SLIC has absolutely nothing to do with the windows you are trying to install, but stands in the BIOS of the laptop. Someone hacked the BIOS Acer to tell windows antifeatures of piracy which is HP laptop, presumably so that they could use HP media instead. Reinstalling Windows will not fix the BIOS.
All I can suggest is to download the Acer BIOS update files and try and install one to replace the SLIC entry. There is however 2 caveats to that. 1stly that the damaged area is not always included in the files to update the standard BIOS, so if you can run a BIOS update may not solve the problem. 2ndly some BIOS update programs you cannot install an older than the currently installed BIOS and one that fits in a first time (because it can be complete) would be the version original factory.
It's not all just Microsoft to blame for this issue when it was caused by someone trying to circumvent the measures to combat software piracy that any developer has the right to use. As said from your description that it is only a problem due to fraudulent activity.
Also when you are communicating on this forum you're not dealing with Microsoft, all the people here are voluntary and have no direct involvement with Microsoft to help posters like you.
-
Fake copy of Windows 7 (Home Premium)
Good afternoon
It's time for me to reach out to the Microsoft community, about 2 weeks ago, that my copy of Win 7 Home Premium has failed. My copy of Windows 7 Edition Family Premium is a legitimate copy and all the programs that I've always bought a copy is legitimate if it Microsoft Office, XP, 7 or even 8, to avoid any problems. Now, my version of Windows 7 Home Premium is the same on my laptop and my desktop, using the same product key, my laptop now errors saying that I have a counterfeit copy of Windows 7 and is not a copy authentic, even try to reinstall from the same primary drive will not accept the product key. It is simply outrageous that we are making an investment in our computers and in this case, and we cannot even go back to Microsoft. I am so frustrated that it happened and have run out of ideas on what to do and I can't afford to buy a new copy of Windows 7 and DO NOT in Windows 8. Can I do to have my laptop about how it wasn't pop ups saying that my copy of Windows is not genuine and it's fake? Any help would be greatly appreciatedThank you!!Harry EberhartSkip entering your product key Windows 7 and complete the installation.
When you reach the desktop, click Start, right-click on computer
Click on properties
Scroll down to the Windows Activation
Click the link x days before activation.
Click on the link that says: "show me other ways to activate.
Enter the product key
Click next
Select the Activation of the phone
Click Next when you enter your key page
Select your country
Click Next, call the number listed
Be sure to explain your situation to the Appeals Officer.
Provide the installation generated when ID requested by the call agent
They give a confirmation ID in return, enter it
Click next to complete the activation.
However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.
15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.
So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.
Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
http://go.Microsoft.com/fwlink/?LinkId=52012or
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
Windows will not activate after the hard drive is replaced on Windows 7 Home Premium.
Recently, I had a hard drive crash and had to replace my hard drive. I took it to a computer to fix store, and they have installed and gave me a new drive for windows 7 Home premium. However, it was not approved, and I have no key validation. How can I validate windows now?
Search for your key on the side of an office or downstairs (sometimes inside the battery case) of a laptop.
How to activate Windows 7 or Vista manually (activate by phone)
http://support.Microsoft.com/kb/950929/en-us1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone * do not select/press any option * and wait for a person to help you.
(6) clearly explain your problem to the support person.
(7) the person must give you a confirmation ID, copy it down on paper,
(8) check that the ID is correct in reading the support person.
(9) to enter the ID number, then click 'Next' to complete the activation process.---------------------------- Alternatives -------------------------------------
To enable the use of the phone
1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
then by clicking on activate Windows now. ?2. click on show me other ways to activate.
3 type your Windows 7 product key, and then click Next.
4. click on use the automated telephone and then click Next.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.5. click on the location nearest you from the drop-down list, and then click Next.
6. call one of the available phone numbers listed. An automated system will guide you through the activation process.
7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.
8 Note the confirmation ID the phone system gives you.
9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.
10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.
Microsoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)The phone number is not working:
Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspxRegister Windows 7
http://Windows.Microsoft.com/en-us/Windows7/help/register
Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
filled with tips, creative tips and other information to you help get the most out of Windows 7.
You also get a subscription to the monthly newsletter of Windows Explorer,
where you will find other tips and tricks, as well as special offers.Activation and registration of a Microsoft product
http://support.Microsoft.com/?kbid=326851
Windows activation: (888) 571-2048Learn about Activation:
http://TechNet.Microsoft.com/en-us/library/ff793423.aspxJ W Stuart: http://www.pagestart.com
-
Hello. About all of the weeks I have my upload computer files from one day to the next. It's a 17-hour process, and I don't want the computer off or restarted during this process. Murphy's law usually results in an update windows & restart related happening whenever I put my computer to download said. First of all, it is deeply annoying that windows would reboot my computer without asking me (Yes, I realize he asks you, and if you are away for an extended period, he just goes ahead and does it... but really, what the $#! % is the point of asking you if she goes ahead and that anyway when you get him just enough early?) Wow! Incredibly retarted the Windows for this.) But anyway, how can I disable this for Win7 Home Premium? (As if in the first place is not quite annoying, making it virtually impossible to figure out how to turn it off is like adding insult to injury). Please NOTE, I've seen some other forum post responses on this site that is: (1) link to an information page on the group policies for system administrators, but nowhere does really explain where and how to access these policies and change them! (2) has a process that begins with 'gpedit.msc' running, but when I started > box to search for this file, there is no result. (3) the hacking the registry (seriously? Please, don't.) SO, please tell me how to disable the auto restart, step by step, without messing with the registry, for WINDOWS 7 HOME PREMIUM. Ideally, I'd like to be able to potentially re - activate cela in the future and/or switches back as my usage dictates. And for the record, it's nut that's not a simple option toggle any, as when my computer or monitor sleeps... Thank you!!
Thank you. I'll do it and change my Windows Update settings. BUT, FYI, in an act even more incredible, the same night I posted my question here, my computer was said upload, and I was still in place at 03:00 (when Windows is set to d/l and install updates). I went to the kitchen for a bit and returned to my computer to find a countdown - he downloaded updates and "will re-start in 7 minutes" or so and counting down... I said "AH HA!" I caught you! "I clicked the button of REPORTER and went to bed smiling that I myself had saved wasting many hours of work. But when I woke up the next morning... HE HAD DONE IT AGAIN! This means that it is: (1) downloaded another "critic" (cough) update later in the evening, which seems likely because it took to do this at 03:00 and had already done so... or (2) the REPORTER button defers only during a certain period of time (maybe an hour, or even less, by the look of it) and then do it again anyway.
This is ridiculous. As it is not ridiculous to called 9 10 patches 'critical', so critical that an urgent restarting your computer is necessary EVEN IF HE is BUSY WORKING, the substitution of the computer user asks to postpone and reboot anyway is absolutely unacceptable. How the manufacturers of Windows might think this makes sense, let alone was a good idea? Reporter should make the computer restarts DO NOT until * I * say he is allowed to do.
In this case, finish the work of 17 hours, that the computer was in the Middle has been MUCH more critical that whatever is downloaded updated. NO doubt about it. I know. Apparently, my operating system is not smart enough to know. So to take it upon himself to replace my reporter application is crazy. And in addition, the operating system MUST be smart enough to understand this - it's really not that difficult - if the computer is a lot of work, something intense, a download that is not finished, a sort of bar of ANY progress on ANY application which is not 100% yet, etc., it should be smart enough to WAIT to reboot anyway.
Thanks again once, change Windows Update settings so it will download updates but let me choose to install them, since this operating system is so poorly thought.
-
I want to download a copy of windows 7 because I don't have a backup for this cd! I have a product key.
THX...
Thanks J W Stuart
This page: http://www.pagestart.com has a lot of important information. very useful for finding stuff in one place.
what I did is I downloaded a copy of windows 7 from http://getintopc.com/softwares/operating-systems/windows-7-home-premium-free-download-iso-32-bit-64-bit/ and it burned on a dvd. I changed my hard drive and installed windows and it worked! Then I activated the windows with the product key that I had. And now my laptop works very well!
Thanks to all of these helpful people who gave me all the information. I appreciate it! :-)
-
Try to upgrade to Windows 7 Home Premium and can't get past the blue screen upgrade now
Try to run the upgrade to WIndows 7 home premium to clean virus problems. have tried for days, unable to get past the blue screen upgrade now.
If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.
-
How to change the AHCI SATA in IDE in Windows 7 Home premium?
Please can someone explain how to change SATA from AHCI to IDE settings in windows 7 Home premium?
I tried to find it in the BIOS options is not thereIt is probably not possible to change it if it is in the lock settings. A possible solution would be to connect the drive to another computer that can be set in IDE mode. Frankly, I'm skeptical about the value of HDD regenerator. If the drive has bad sectors, it is best to replace it.
-
Why isn't the local users and groups in Windows 7 Home Premium active?
Unfortunately, the page of "Compare editions" for Windows 7 does not show that it is disabled for Windows 7 Home Premium. So, I think that Microsoft is engaged in false advertising by activating only not this snap-in Control Panel.
Bottom line is: I need to access the Panel to ensure that I am in the Visual Studio debugger users group. So, I can't debug anything. The software does not work properly.
Microsoft should immediately activate this feature.
I'm sorry, but no original version of Windows has always included local users and groups .
I recommend posting your question in the MSDN Visual Studio Forums , where other developers can answer. They know how to do what you want.
To get your suggestion to the right people at Microsoft, please click the give us your comments. Help improve Windows 7 link under ads at the top of the main page of the forum, or go to the page give us your comments for Windows 7 . Boulder computer Maven
Most Microsoft Valuable Professional -
My friend gave a laptop computer whose OS is Windows Vista Home Basic Edition. I format the computer and install a Windows Vista Home Premium I have for my desktop computer. Now, I have a problem with a product key. When I start the laptop, it indicates a product key requirement. I enter my desktop OS product key, but I still see the declaration valid product key. My question is this. If I buy the upgrade to Windows 7, the operating system will work in the laptop even if she has a problem with the product key. If I buy Windows 7 upgrade, there will be no problem with the product key? Or do I have to buy a new Windows Vista Home Premium for the laptop? Or if you know anywhere I can buy a product key for Windows Vista with a reasonable price? Thank you
You cannot transfer a license from another computer to another computer, especially if the license came with this machine. You will need to purchase a new license.
Yes, you can purchase a license of Windows 7 Edition upgrade Home Premium and use it.
Where can I still get Windows 7?
Full version - Microsoft Windows 7 Home Premium
Version upgrade - Microsoft Windows 7 Home Premium Upgrade
Family Pack: Upgrade of Microsoft Windows 7 Home Premium Family Pack (3 users)
-
I have a Lenovo B570 delivered pre-loaded with Windows 7 Home Premium.
Lately, things have started to act strange... and some programs are stop to work.
I ran the PATCH program, but he could not fix things.
I tried to 'Recover' with the previous system restore point, but that has not solved anything.
So, I have my product key, but not the software.Can someone point me in the right direction?
I have a Lenovo B570 delivered pre-loaded with Windows 7 Home Premium.
Lately, things have started to act strange... and some programs are stop to work.
I ran the PATCH program, but he could not fix things.
I tried to 'Recover' with the previous system restore point, but that has not solved anything.
So, I have my product key, but not the software.Can someone point me in the right direction?
Google for "Digital River Windows 7 ISO.
Maybe you are looking for
-
Update graphics card that went wrong; Need help.
Let me first, I the a6700f desktop model. Here's my problem... There is a month that I bought a graphics card for my computer, the NVIDIA GeForce 8400GS 512 MB DDR2 PCI Express graphics card, link below: http://www.BestBuy.com/site/olspage.jsp?skuId=
-
WMF.exe - Systemfehler / rtl120.bpl
Nach dem Start der remark WMF.exe - Systemfehler Green DAS kann nicht gestartet werden proramm da die Datei "rtl120.bpl" fehlt Installieren Sie das Programm Rubis, um das problem zu beheben. Da gleichzeitig die von nicht mehr original green PowerPoin
-
Security warning box arise constantly in Outlook
Security WARNING box continues to appear on Outl; ook/Hotmail prevents me from doing anything! Hit or not doesn't matter. Should Xbox hit repeatedly and he takes forever to closem, then appears shortly after. How can I stop this?
-
HP C4280 all-in-One will not print photos on any HP photo paper
HP C4280 all-in-One will not print color or B & W photos on photo paper. Color and B & W photos on plain paper prints. It is used to print normally on all documents. No change, I am aware of cause this malfunction. Any suggestions?
-
Demonstration/Question test
Try to set up the demo vFoglight. Can anyone point a newbie at some tutorials specifically tcp/ip ports requirements? Thank you Larry