During the installation of Win - xp pro vmware error 10 as mentioned below

During the installation of Win - xp pro in 10 vmware, it is showing "OPERATING SYSTEM IS NOT FOUND" how to solve. I scoured the file .iso record and properly connected to all readers. Help me solve this problem.

I think you'd have better luck if you go to the website of VMware support.

http://www.VMware.com/support.html

Tags: Windows

Similar Questions

  • Qosmio F20-141 - cannot start the installation of Win XP PRO SP2.

    Failed to start installation of Win XP PRO SP2.

    After click on "Start of the CD" I can see for a short time only from message ~ "Install from XP Wisdows" (small white letters at the top of the black screen)

    After this computer hungs in black screen.

    QOSMIO F20-141 for the Federation of Russia
    M/N: PQF20E-02801YRU

    Hello

    Have you used the Toshiba Recovery CD or did you install the operating system from the original CD of Win XP?
    As far as I know the recovery procedure is very easy to use and it should work without any problems.

    Good bye

  • During the installation of SP2 (KB2656369) get 0x800706BE error message

    During the installation of SP2 (KB2656369) error 0x800706BE get tried restoring the system without success is - that someone has a fix for this problem?

    Hello

    Trying to download SP2 from http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=28

    You can install SP3 - download from http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=24

    Don't worry about the text which says that these are network facilities, they work very well for standalone computers.

    Tricky

  • "D" created automatically during the installation of Win 7?

    Hello

    My wife has a Toshiba laptop, bought refurbished, with Win 7 Home Premium installed.

    Windows Explorer shows 2 partitions on the hard drive, "WINDOWS(C:))." "has the OS installed on it and"Data (D :) '. "has the necessary information, when used in conjunction with the recovery CD for system recovery.

    My question is:-the 'D:' partition created automatically when installed Win 7 on a blank disk, formatted, hard or when you perform a "clean" installation to upgrade XP. The high '\HDDRecovery Data (d :))' folder on the partition "Data (D :)". ', (can't get 'D:' through Explorer properties) on the laptop my wife watch as being slightly more than 6.5 GB.

    If this partition is not created automatically that I can programmatically create it before the installation owner, but if I do, what size does?
    If it's better that Win 7 'sees' a single partition, I can easily do that.

    This situation "C:", "D:" suits me very well because I currently just on my XP Pro x 64 system drive. A historic agreement dating from when I used a dual-boot put in place. When I spread the secondary boot option I put in place a small drive "D:" so that my 'work' partition, first on my second hard disk (3) has been kept as "E:", several shortcuts pointing to the location. I didn't want to trawl through the system to change things to E: to something else. Guess I'm just a bit lazy!

    So, in short, "D:", create or not create?

    Thanks in advance for your help.

    Tony Norton

    D: is normally assigned automatically to your recovery drive or optical drive. The size of the recovery partition is normally determined by the manufacturer of the computer, and it can be based on a number of factors such as the WIM image to reinstall Windows 7 in addition to packaged applications, drivers, and utilities. Sizes may vary from 10 to 20 GB. Some may if distributed on several partitions recovery.

  • PCI.sys blue screen during the installation/repair Windows XP Pro

    My computer has been invaded by the virus, and they have corrupted my system files until I can start only in safe mode. I tried to repair Windows XP Pro using the installation CD, and I am getting a blue screen with the PCI. SYS on it. It has been set to boot from the CD, and it was.

    Also, I have already installed Recovery Console, and the computer is a Windows XP SP2 with the plant material. I did a CHKDSK on it and looks very good.

    Oops. just a simple driver issue. I started in the last known good config and had no error. I uninstalled the driver and got the suitable driver for my laptop. Sorry for the inconvenience!

  • computer froze during the installation of win 7

    I installed windows 7 on my computer, it got a ways in the installation but then frozen, I rebooted the computer, but now, the only options it gives me is to restore the computer, or tried to fix the computer, ive tried both, but its hours for some reason any and then says it was unsuccessful and restarts

    Boot from the Windows 7 DVD
    Click Install now
    Accept the license agreement
    When the option is displayed to select a type of installation, click (Custom advanced)

    Select the disk partition where you want to install Windows 7 click Next.

    You will receive the following warning:

    The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

    (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

    The installation program will now begin installation. During installation, your computer will be restarted several times.

    Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

    You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

    http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

  • During the installation of Windows 7 on 10 error (dualboot) 0 x 0000428

    Hey guys now I have a laptop that was windows 8.1 and I upgraded too 10, now I want to double cabin with a windows 7. the problem is that it keeps giving me this error when I try to install it on my other drive.

    I have 4 drives on my laptop, to the top with a total of 2 to a value of space, 500 for each, 10 windows operating system is in the first drive, and I want to install windows 7 on my last drive.

    but when installing my laptop restarts this message pop ups

    and when the windows 10 re appears as it won't let me load the installation appears

    so can you guys pls help me out a little here, because I am in a bind and can't quite figure how to manage and deal with the mess that I am in

    Windows 10 laptop, Install and dual boot windows 7 on it - Original title

    Hello

    Thanks for posting in the community.

    We understand your concern and we will provide the necessary assistance to help you solve the problem.

    I would like to inform that you can not install Windows 7 because of a file error as described in the error message. However, I would suggest that you refer to employment provided below that can help you correct the problem and successfully install Windows 7.

    Link 1: Refer to the post by Killian Ahmed

    http://answers.Microsoft.com/en-us/Windows/Forum/all/winloadexe-oxc0000428/4648db7e-0d99-4446-B207-dd6911a4b535

    Link 2: refer to the post by Andre Da Costa

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/0xc0000428-or-0x428-cannot-verify-digital/e1d3a09a-5e62-4B87-8e56-0bc33ddbab33

    For more information on dual-boot Windows 7 and 10 refer to the article below

    http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-dual-boot-Windows-7-and-Windows-10-preview/9e9b6066-d99b-4D2F-84dc-38e646c3c6ae

    With regard to the error message that you receive during indexing in your computer may be due to the failure of the Windows 7 installation. This is why it clearly states that you need to consult with the Advisor to upgrade the version of Windows that you are trying to install has failed.

    Hope this information helps

  • I get this error code during the installation of my windows 7 update - error code 80246008.

    If I followed the steps of microsoft help for this error ie., by clicking on the smart in the background (BITS) transfer-> start Service... Is to show that another error "error 1068: the dependency service or group could start.

    ajaysundar,

    http://support.Microsoft.com/kb/910337

    Error message after installing Antigen: "error 1068: the dependency service or group could start.

    http://support.Microsoft.com/kb/905999/en-us

  • Satellite Pro A10 hangs during the installation of Win XP

    Hi guys,.

    just thouth I would ask why my new laptop will not install XP.
    Only, it crashes during installation. No n' achete purchased on this occasion, had no operating system installed.

    I wonder if it's a driver problem, using my xp disc I bought, but like I said that just, it will hang during installation.
    What I need to intergrate drivers somehow?
    I'm guessing that this is the problem?

    If so, how do I?

    see you soon

    I really wonder that your new laptop is probably produced about 5 years ago. ;)

    In any case, to install WXP use WindowsXP SP1 installations CD (factory settings). If you want to discuss a little more please explain to us what exactly is happening.

  • during the installation of windows xp pro, I get a message that says can'nt read the disc

    When the windows xp pro installation I get a message that says can'nt read the disk and ask a complete worm that I have a full verion

    Hello

    Using disk management to reassign the partition and try to install the operating system.

    Rgds,
    J Chambers
  • Satellite A500-1 - BSOD appears during the installation of Win XP

    Hello

    When I try to install Windows XP, it displays this screen on my laptop:

    http://img27.imageshack.us/img27/5498/img0159ni.th.jpg

    Greetings

    Hello

    I think that the BSOD appears because the Win XP cannot find the HARD drive due to lack of SATA driver.

    There are two solutions;

    (1) you need to add a SATA driver for Win XP (done SATA driver is part of the Intel Storage Manager)

    (2) or you need to set the Compatibility Mode AHCI SATA mode. This allows you to install the Win XP without the SATA drivers.

    PS: Option of job search Forum and you will find many discussions on this topic

  • Windows will ask drivers during the installation of Windows 7 Pro on samsung SSD 950

    I'm doing a clean install of windows 7 Pro on a new Samsung 950 m2 Pro drive. My motherboard sees the drive but the windows 7 install is not and wonder which I can't find a driver. It is a new construction. Asus motherboard. I'm installing from the DVD, and everything starts fine until the Setup program cannot find the 950 pro. The 950 pro is the only player at this moment, I installed. Is there any solution for this?

    Thanks for looking into this but I found a solution, all I had needed was the pilot for the 950 pro, once everything went as smooth as, say Kalua. Feel good that here the monster has increased.

  • During the installation of Panda AV Pro 2011 a box with the message below shows. And Setup stops. Why?

    Feature: NT
    Component: ResidenteFicherosNTPAV
    File: C:\windows\system32\pav\
    Error: Access is denied.

    The Panda Forums are listed below:
    http://support.pandasecurity.com/forum/viewforum.php?f=41&SID=c5bdef41a00b36c9f33b8fdf32982840

    Until they are better able to deal with this problem.

    Thank you

    Marilyn

  • during the installation of win 7 installation cd error is occurred and says this file of windows cannot extract?

    My dell vostro 1440 laptopis and serial number is 4BJMGR1.

    Refer to the Dell technical support, according to this tag that your system is still under warranty

  • During the installation of Windows 7 Ultimate, get error, "the installation program could not use the existing system partition because it does not contain the need free space."

    When installing win7 ultimate, {install} error message indicates "Setup could not use the existing system partition because it does not contain the free space required... I have 500 GB free, ram 4 GB 2.4 ghz quad... any help?"

    If you have any external storage devices such as external hard drive or thumb drive, unplug them, they might interfere with installation.

Maybe you are looking for