During the registrationof windows media Center recording error

I just reinstalled Windows XP pro on my laptop using the support disc that comes with it.  Formatted the C drive and installed.  At half way through a message "errors of recording when recording in Windows Media Center." For more information, see - windows/medctroc.log.

After accepting this installation on board after starting a box came up with "Starting windows first time.»  Please wait. "Nothing happened and I ended up re start it manually.

Another view "configure."  Windows Update - dot.net .net service pack 1.1 - dot - restart

Yet once I had to reboot manually.

error came: sl1a.tmp common language runtime debugging services application has generated an exception that could not be treated have id = 0x4e0 (1248), thread id = 0x4fo (1264)

When widows finally came message read - system will restart - not found ngen.exe entry - point and then - get asked the version of the runtime could not be found in the dynamic binding.

I open IE and try to get updates and a message says "the requested lookup key was not found any active activation context.»

I managed to install Opera, but that is not enough with Microsoft update.  Could someone please help?

This looks like one of three things is unhealthy

(1) your installation disc

(2) your RAM

(3) your hard drive,

You must test each and then determine if its more cost effective to replace the unit or machine.

(1) test the drive in another machine with IsoBuster - an analysis of surface and find if everything is OK if there are some errors present

(2) tΘlΘcharger a RAM www.memtest.org - run at least 8 passes Tester and see if errors appear

(3) download the utility from control of the manufacturer of the HD and create the bootable CD - do a quick scan and then the long scan of the hard drive and see what it reports.

Tags: Windows

Similar Questions

  • Windows Media Center - recorded not from TV Signal, but TV signal is good

    Windows Media Center record regular shows without problem until last week. Now I have to manually press record for each show, because the Scheduler is almost completely useless, the TV signal is absolutely perfect. Once I pressed record manually, it records very well.

    In regular history, the error is not recorded: no TV Signal

    This is simply not true. I noticed that this can happen, in particular, to the HD recordings. But the signal is always good.

    I tried to delete the programmed recording file but no change.

    6280 SCT dual dvb - t2 bda tuner Windows 7

    The system restore did not improve anything.

    In fact, in this case, I found the removal of all channels and re analysis for them this is the solution.

  • Windows Media Center Setup error: setup parameters for your region could not be determined.

    original title: MEDIA CENTER SETUP ERROR: Configuration settings for your region could not be determined

    windows vista operating

    Media Center worked then xbox 360 could no longer find videos.  I can not run the Setup program for media center because of this message:

    The configuration settings for your region could not be determined.  Restart your computer to solve.

    Things I've done:

    restarted computer several times

    run system restore

    disabled the norton 360 firewall settings

    has ran norton pc tune up

    still can't media center to work Please HELP

    Thank you

    Hello

    The problem may occur if the Windows Media Center components are not registered correctly.

    I suggest to try the following steps to solve the problem.

    The registry Windows Media Center components

    =========================

    1. click on start-> all programs-> Accessories, right-click command prompt and click Run as administrator.

    2 type the following commands, press ENTER after each line.

    REGSVR32 ATL. DLL

    CD C:\WINDOWS\EHOME

    EHSCHED /UNREGSERVER

    EHSCHED/SERVICE

    EHRECVR /UNREGSERVER

    EHRECVR/SERVICE

    EHREC. /UNREGSERVER EXE

    EHREC. EXE/REGSERVER

    EHMSAS. /UNREGSERVER EXE

    EHMSAS. EXE/REGSERVER

    We can open Windows Media Center now?

    It will be useful.

  • Windows Media Center record the wrong channel.

    I have windows 7 with Windows Media Center.  I get my signal through a TV tuner card.  My signal is a local digital cable.  For some time I get recording wrong channel and can't understand why.  I try to save channel 12.1 by choosing the show on the guide and introduction to the record.  When I go to view the recording, she carries the name of the program that I tried to register, but rather records channel 5.  I check the stats and it said it was channel 12.1.  I rarely watch channel 5, so it would not have been set to that channel instead.  I also close media center and it works in the background.  I'm puzzled.

    By "How's your live TV feature", I meant "on your Media Center." ;)

    Given what you have said here and in your other thread, I would say new TV Setup running (and you might find yourself wanting to "rerun Media Center Setup."  The latter will force a reset of the entire configuration of MC; Sometimes, to run the installation of TV is not entirely clear the previous TV config.)

    As your local cable company has made an overhaul of their system, you may need to redo the TV Setup to have any chance of your Media Center properly reflecting the changes.

    HTH,

    Chris

  • Windows Media Center Gets error: invalid Application - cannot start

    Windows Media Center (of the month last Vista 32-Bit)

    I have problems to make internet TV, news and Netflix to connect to the internet when you use Windows Media Center.  They are all under the TV + movies option during the WMC.  I get an error saying [invalid Application - cannot start "" ""].  Not sure if this is because the internet connection that I use is not one that has a user name or password.  Not know how to configure it for this version of Windows.  I don't get this problem when you use Windows Media Center in Windows 7.

    At the opening of Windows Media Center I get the following message: INVALID APPLICATION; "Unable to launch SymAddin; and a checkbox to disable this Application (I have not checked the box).
    http://social.answers.Microsoft.com/forums/en/vistapictures/thread/ea536e68-5903-444C-8d10-6bd9fa936dc9

    "Invalid application-unable to launch" Windows Media Center - MSNBC.com
    http://social.answers.Microsoft.com/forums/en/vistaprograms/thread/18c69d9b-e93d-4350-A17C-15ef9ae7d76f

    "Has anyone, using windows vista ultimate media center, was a 'failed to launch'"demand invalid." »
    http://Askville.Amazon.com/Windows-Vista-Ultimate-Media-Center-unable-launch-invalid-application/AnswerViewer.do?RequestId=2894719

    I guess that set up WMC is identical in both Vista and Windows 7?
    http://www.Microsoft.com/Australia/Windows/Windows-Media-Center/

    Your firewall is blocking access to the WMC?

  • Windows Media Center Configuration error

    Hello. I found people with this problem all over the internet but I have yet to get a final solution.

    My PC is running Vista Home Premium with Media Center the greats. It is connected to my wireless network.

    My Xbox is connected to the network directly, as he's sitting right next to her.

    My PC detects the Xbox in 'Network' and it appears as an Extender when I run the Media Center application. My Xbox gives me the 8 digit code and I put it. I said I want to share media, and it then goes to the configuration bit extender. Then it says Configuration error.

    I have enabled Media Player via my firewall, open all the necessary local ports and don't have any other firewalls up. I don't know what is happening.

    I'd like to get this up and running, so any help is welcome.

    EDIT: Just realized this placed entirely in the wrong place. Please move it, mod?

    Hi free-kill.

    Thanks for choosing the Windows vista Forums.

    I suggest that you go through the link below that says

    1. how to set up a Windows Media Center Extender device

    http://windowshelp.Microsoft.com/Windows/en-us/help/8076aff3-16ec-4751-9F57-d36e0ff407201033.mspx#EPD

    2. how to solve problems with a Windows Media Center Extender device

    http://windowshelp.Microsoft.com/Windows/en-us/help/e217efbf-8A5D-4681-af74-c01e1b648b641033.mspx

    I also suggest that you visit the following link to get the best answers to the question since it is linked to the Xbox:

    http://forums.Xbox.com/

    Best regards, |
    Marnie.

  • Windows Media Center gives error wmp.dll

    Original title: Windows Media Center - Vista - does not - please help!

    Hello.   We had a problem with Windows media center after the SP2 update.   We tried a few workaround solutions, and now we get the following error: "C:/windows/system32/wmp.dll is not designed to run on Windows or it contains an error.  Try to install the program by using the original installation media or contact system support".  I was unable to find a download for Windows media center in Vista.  Can you help me?

    Hi EricLarson_CL,


    Method 1: Perform the analysis of System File Checker (SFC) that might help you resolve the issue.

    To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

    To run the System File Checker tool, follow these steps:
    1. Click Start and type cmd in the box start the search.
    2. right click on cmd in the list programs and then click Run as administrator.
    If you are prompted for an administrator password or a confirmation, type your password or click on continue
    3. at the command prompt, the following line, and then press ENTER:
    sfc/scannow

    Follow the instructions in the link below for more information on scan SFC.
    http://support.Microsoft.com/kb/936212/

    Method 2: You can turn off & on Windows Media Center in Windows Feature & check if the problem persists.
    Turn on or off Windows features

    Method 3: Try to rebuild the Media Center data store and check if it helps:
    (a) exit any running instance of Windows Media Center.
    (b) delete the mediaCenterDataStore.db file. By default, this file is located in the following location:
    %SystemDrive%\ProgramData\Microsoft\eHome\mediaCenterDataStore.DB
    To remove the file, follow these steps:
    (a) click Start and then click on run
    (b) in the Open box, type run and then click OK
    If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
    (c) in the Open box, type %systemdrive%\programdata\microsoft\ehome and then click OK.
    (d) in the details pane, right-click right mediacenterdatastore.db and then click on remove.
    (e) click Yes to confirm that you want to move the Mediacenterdatastore.db file to the trash.
    Start Windows Media Center

    Note: You may not be able to download Windows Media Center for vista, but it is integrated with the operating system.
    Hope this information is useful.

    Thank you and best regards,
    Savan - Microsoft technical support.
  • Video Windows Media Center HDMI error problem

    I noticed this problem scattered on these forums, and it took me some time to find the solution on other forums, but thought I'd post it here. For people using some graphics cards ATI HDMI with windows 7 MCE, trying to play Dolby Digital sources causes the MCE crashing. The error will say something in terms of "video error... in windows media center must be restarted." This happens about 10 seconds after the video with audio playback SD. I tried to play with all the different types of codecs ffdshow and AC3Filters etc.

    The solution is in fact a major bug in windows 7. To work around this problem MCE7 and windows sound properties cannot assign 5.1 speakers. You define the sound properties in 7 Stereo 2.0 and keep the MCE to 5.1 for dolby Digital encoded files without MCE game crashing. I hope that MS will make a fix for this because it is a serious problem, and the solution is not easy to find.

    I have a ZOTAC ZBOX ND02, dual ATI 750U Tuners and Windows 7.  Reloaded the o/s once to resolve quickly the it and returned.  Spends hours on the subject.  Switching to 2 speakers in the MCE Assistant did the trick.  Thanks for the tip.  Phew!

  • How can I copy my Karaoke from CD + G on Windows Media Center records and have my collection on my laptop?

    I have a nice collection of karaoke disc CD + G I want to be able to copy on my media center windows and being able to have my accessible karaoke music on my laptop.  I need to connect my laptop to my home entertainment center and have our usual karaoke fun nights with friends and family.  It told me that windows media center would be perfect for this because it can categorize my music and make it easy to locate our favorite songs and so on please help me to find the solution to my situation.  We do not want to download karaoke from the internet, we simply want to use what we have.

    Given that technical issues are inappropriate in the forum comments responses, I moved your post to the windows ' Music and Sound: forum.»  Always include your version of Windows when you post.

    Karaoke CD is not normal music CD, I think that you will need a program.  I don't think that Windows Media Center can read data from subtrack.  See this: http://experts.windows.com/frms/windows_entertainment_and_connected_home/f/25/t/11036.aspx

    A codec for karaoke claiming to allow Windows Media Player to manage the CD + G discs can be found here: http://sourceforge.net/projects/karaoke-dx/files/

    Here's a helpful article: http://www.ehow.com/how_6751253_copy-karaoke-discs.html.

    Also visit http://www.tricerasoft.com/index2.html or http://www.mtu.com/index.htm

  • How to bring back the main Windows Media Center start screen?

    I have Windows Vista Premium and this is why I have Windows Media Center. All of a sudden, I'm not able to see the main start screen. What can I do to get it back? I did nothing to him, but all of a sudden, I can't choose anything. Impossible to use for my flat screen or to the office. Help please...

    Update your graphics card driver. Visit the manufacturer's Web site to download and install the latest compatible driver graphics card.

  • The int window Media Center. TV.

    until a month ago I was able to watch internet tv with a tv tuner. now the tv guide does not appear in the media center. Part of microsoft is fixing or they eliminated it go the media center?

    Microsoft does more Internet TV in Windows Media Center of 09 20, 2012.

    It will be supported.

    http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/f/25/t/103422.aspx

  • You can transfer the Pack Windows Media Center on another computer Windows 8 Pro?

    When Media Center Pack goes free for win8 Pro, I submit one.

    When I update with the key Media Center Pack, I see the LICENSE AGREEMENT on the terms of transfer software.
    I have a question:
    It is said bind Media Center Pack to your computer for activation, this means that you can not transfer a Media Center Pack to another computer, but dose the win8 pro which update this Media Center Pack also link to this computer?
    Or just the Media Center Pack has been linked to, the win8 pro which update this Media Center Pack can be transferred to another computer?
    Can someone give me an official response?

    If you remove the installation of Windows 8 Pro of the current computer, then activate it on another computer, you can then move the Media Center license on another computer. Media Center license is dependent on installation of Windows 8 Pro enabled. He could never be associated with the computer because it requires an operating system.

  • Problem installing Windows Media Center: get error 'no IR hardware found ".

    I keep getting stuck trying to set up my tv tuner in my HP Pavilion laptop dv4 (entertainment version), I have a satellite signal, a TV HP Hybrid Tuner (which did not come with a large part of the documentation.  So I get through all the setting up until the last section, where it says "my remote control must be able to change the channel on my set - top box and that"no IR hardware not detected"he also tells me to see my hardware documentation (zero to watch), so I'm stuck...» Help, please!

    You need to trick MS media center.   To implement, choose manual configuration. Then the antenna.  Analog.  Finishing.

    Go to the main configuration of media center page.  Click on TV.  Guide.  Add a channel.  I added 3.    Now I just use my remote for my cable box to change channels...

    So far, it works like a charm...  Good luck, hope it works for you!

  • Reinstallation of Windows Media Center XP error, the application failed to initialize properly (0xc000135

    I had to install a new hard drive after the death of my old. I use my Dell recovery/reinstallation disk. The first time I tried installing that it froze after the reboot. I then did a repair installation (twice) and each time got the following error:

    PxShare.exe Application error.

    The application failed to initialize properly (0xc000135).  Click OK to close the application.

    It appears at the end of the installation, but when my login screen is displayed, it shows only one account, administrator and request a password. I have not configured any accounts when I did the installation and you do not have a password. I tried to enter without password, using admin as password and check-in safe mode did not help - it still asked for a password.

    I don't know if the two problems are related or not.

    Thanks for any help!

    Hi Lowery619,

    (a) If you have external devices unnecessary connected to the machine, unplug them.

    (b) thereafter, you can try reinstalling Windows XP.

    For more information, please visit this link: install, reinstall, or uninstall Windows

    Install Windows XP

    Hope the helps of information.

    Please post back and we do know.

  • Cannot install the Pack, Windows Media Center, error activate Windows first

    I activated my windows 8 pro with a product key I bought it but when I go to the page where it says to buy support pack center it says I need to activate windows first, but windows is already activated! Help me!

    screenshots

    http://Tinypic.com/r/28qut8i/5

    http://Tinypic.com/r/20gdzco/5

    Yes! Windows is activated after I called. Thank you!

Maybe you are looking for